! Started logfile: J0852-1528_S_2005_07_20_yyk_uvs.log on Fri Jan 20 10:10:06 2006 obs J0852-1528_S_2005_07_20_yyk_uve.fits ! Reading UV FITS file: J0852-1528_S_2005_07_20_yyk_uve.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.98 visibilities/baseline/integration-bin. ! Found source: J0852-1528 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1527 lines of history. ! ! Reading 1764 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0852-1528_S_2005_07_20_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.163304 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.476 mas, bmaj=6.158 mas, bpa=-4.324 degrees ! Estimated noise=1.7123 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.110135 Jy ! Component: 100 - total flux cleaned = 0.129936 Jy ! Total flux subtracted in 100 components = 0.129936 Jy ! Clean residual min=-0.012468 max=0.011785 Jy/beam ! Clean residual mean=-0.000009 rms=0.003036 Jy/beam ! Combined flux in latest and established models = 0.129936 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.129936 Jy ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.097653Jy sigma=1.277339 ! Fit after self-cal, rms=0.096806Jy sigma=1.256658 ! Inverting map and beam ! Estimated beam: bmin=2.476 mas, bmaj=6.158 mas, bpa=-4.324 degrees ! Estimated noise=1.71222 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.895 mas, bmaj=7.378 mas, bpa=-5.355 degrees ! Estimated noise=1.17351 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0137985 Jy ! Component: 100 - total flux cleaned = 0.0153074 Jy ! Component: 150 - total flux cleaned = 0.0158698 Jy ! Component: 200 - total flux cleaned = 0.0156742 Jy ! Total flux subtracted in 200 components = 0.0156742 Jy ! Clean residual min=-0.010738 max=0.012144 Jy/beam ! Clean residual mean=-0.000034 rms=0.003322 Jy/beam ! Combined flux in latest and established models = 0.14561 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 32 components and 0.14561 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096543Jy sigma=1.233616 ! Fit after self-cal, rms=0.096578Jy sigma=1.233503 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.895 x 7.378 at -5.355 degrees (North through East) ! Clean map min=-0.010187 max=0.13495 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.096578Jy sigma=1.233503 ! Fit after self-cal, rms=0.096578Jy sigma=1.233503 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096578Jy sigma=1.233503 ! Fit after self-cal, rms=0.096576Jy sigma=1.233503 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.895 mas, bmaj=7.378 mas, bpa=-5.355 degrees ! Estimated noise=1.17351 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000120145 Jy ! Component: 100 - total flux cleaned = -0.000275042 Jy ! Component: 150 - total flux cleaned = -0.000486919 Jy ! Component: 200 - total flux cleaned = -0.000550954 Jy ! Total flux subtracted in 200 components = -0.000550954 Jy ! Clean residual min=-0.010657 max=0.011866 Jy/beam ! Clean residual mean=-0.000034 rms=0.003273 Jy/beam ! Combined flux in latest and established models = 0.145059 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 38 components and 0.145059 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096650Jy sigma=1.232173 ! Fit after self-cal, rms=0.096659Jy sigma=1.232159 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096659Jy sigma=1.232159 ! Fit after self-cal, rms=0.090300Jy sigma=1.144963 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00362291 Jy ! Component: 100 - total flux cleaned = 0.00387713 Jy ! Component: 150 - total flux cleaned = 0.00398256 Jy ! Component: 200 - total flux cleaned = 0.00393728 Jy ! Total flux subtracted in 200 components = 0.00393728 Jy ! Clean residual min=-0.009611 max=0.010328 Jy/beam ! Clean residual mean=-0.000039 rms=0.003142 Jy/beam ! Combined flux in latest and established models = 0.148997 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 48 components and 0.148997 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090472Jy sigma=1.142891 ! Fit after self-cal, rms=0.089452Jy sigma=1.135196 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.895 x 7.378 at -5.355 degrees (North through East) ! Clean map min=-0.0092777 max=0.13909 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089452Jy sigma=1.135196 ! Fit after self-cal, rms=0.090031Jy sigma=1.129606 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090031Jy sigma=1.129606 ! Fit after self-cal, rms=0.089838Jy sigma=1.128702 ! Inverting map and beam ! Estimated beam: bmin=2.912 mas, bmaj=7.33 mas, bpa=-4.8 degrees ! Estimated noise=1.19258 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00312686 Jy ! Component: 100 - total flux cleaned = 0.00330768 Jy ! Component: 150 - total flux cleaned = 0.00331318 Jy ! Component: 200 - total flux cleaned = 0.00331454 Jy ! Total flux subtracted in 200 components = 0.00331454 Jy ! Clean residual min=-0.009687 max=0.010051 Jy/beam ! Clean residual mean=-0.000040 rms=0.003186 Jy/beam ! Combined flux in latest and established models = 0.152311 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 57 components and 0.152311 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089977Jy sigma=1.127288 ! Fit after self-cal, rms=0.089916Jy sigma=1.127103 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089916Jy sigma=1.127103 ! Fit after self-cal, rms=0.090073Jy sigma=1.129628 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090073Jy sigma=1.129628 ! Fit after self-cal, rms=0.090032Jy sigma=1.129559 ! Inverting map and beam ! Estimated beam: bmin=2.92 mas, bmaj=7.38 mas, bpa=-5.009 degrees ! Estimated noise=1.18465 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00145401 Jy ! Component: 100 - total flux cleaned = -0.00156322 Jy ! Component: 150 - total flux cleaned = -0.0015638 Jy ! Component: 200 - total flux cleaned = -0.00153323 Jy ! Total flux subtracted in 200 components = -0.00153323 Jy ! Clean residual min=-0.009615 max=0.009806 Jy/beam ! Clean residual mean=-0.000058 rms=0.003138 Jy/beam ! Combined flux in latest and established models = 0.150778 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 62 components and 0.150778 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090071Jy sigma=1.129070 ! Fit after self-cal, rms=0.090055Jy sigma=1.129036 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.421 mas, bmaj=14.97 mas, bpa=-1.744 degrees ! Estimated noise=1.59393 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -5.2389e-05 Jy ! Component: 100 - total flux cleaned = 0.000188586 Jy ! Component: 150 - total flux cleaned = 0.00025723 Jy ! Component: 200 - total flux cleaned = 0.000371241 Jy ! Total flux subtracted in 200 components = 0.000371241 Jy ! Clean residual min=-0.005642 max=0.005930 Jy/beam ! Clean residual mean=-0.000117 rms=0.001895 Jy/beam ! Combined flux in latest and established models = 0.151149 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 67 components and 0.151149 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090163Jy sigma=1.129903 ! Fit after self-cal, rms=0.090141Jy sigma=1.129764 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.482 mas, bmaj=6.161 mas, bpa=-4.279 degrees ! Estimated noise=1.72865 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.115322 Jy ! Component: 100 - total flux cleaned = 0.13646 Jy ! Component: 150 - total flux cleaned = 0.14638 Jy ! Component: 200 - total flux cleaned = 0.151903 Jy ! Total flux subtracted in 200 components = 0.151903 Jy ! Clean residual min=-0.011790 max=0.012641 Jy/beam ! Clean residual mean=-0.000038 rms=0.002815 Jy/beam ! Combined flux in latest and established models = 0.151903 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.151903 Jy ! Inverting map and beam ! Estimated beam: bmin=2.92 mas, bmaj=7.38 mas, bpa=-5.009 degrees ! Estimated noise=1.18465 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00143742 Jy ! Component: 100 - total flux cleaned = 0.000849427 Jy ! Component: 150 - total flux cleaned = 0.000554872 Jy ! Component: 200 - total flux cleaned = 0.000438452 Jy ! Total flux subtracted in 200 components = 0.000438452 Jy ! Clean residual min=-0.009720 max=0.009723 Jy/beam ! Clean residual mean=-0.000059 rms=0.003284 Jy/beam ! Combined flux in latest and established models = 0.152341 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 33 components and 0.152341 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.421 mas, bmaj=14.97 mas, bpa=-1.744 degrees ! Estimated noise=1.59393 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000636336 Jy ! Component: 100 - total flux cleaned = -0.000444711 Jy ! Component: 150 - total flux cleaned = -0.000297085 Jy ! Component: 200 - total flux cleaned = -0.000296906 Jy ! Total flux subtracted in 200 components = -0.000296906 Jy ! Clean residual min=-0.005694 max=0.005903 Jy/beam ! Clean residual mean=-0.000117 rms=0.001866 Jy/beam ! Combined flux in latest and established models = 0.152044 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 36 components and 0.152044 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.92 mas, bmaj=7.38 mas, bpa=-5.009 degrees ! Estimated noise=1.18465 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000429777 Jy ! Component: 100 - total flux cleaned = -0.000347311 Jy ! Component: 150 - total flux cleaned = -0.000341521 Jy ! Component: 200 - total flux cleaned = -0.000340469 Jy ! Total flux subtracted in 200 components = -0.000340469 Jy ! Clean residual min=-0.009618 max=0.009845 Jy/beam ! Clean residual mean=-0.000059 rms=0.003200 Jy/beam ! Combined flux in latest and established models = 0.151704 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 42 components and 0.151704 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089839Jy sigma=1.129260 ! Fit after self-cal, rms=0.089826Jy sigma=1.129115 wmodel J0852-1528_S_2005_07_20_yyk\_map.mod ! Writing 42 model components to file: J0852-1528_S_2005_07_20_yyk_map.mod wobs J0852-1528_S_2005_07_20_yyk\_uvs.fits ! Writing UV FITS file: J0852-1528_S_2005_07_20_yyk_uvs.fits wwins J0852-1528_S_2005_07_20_yyk\_map.win ! wwins: Wrote 1 windows to J0852-1528_S_2005_07_20_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000942359 Jy ! Component: 100 - total flux cleaned = 0.00127624 Jy ! Component: 150 - total flux cleaned = 0.000831256 Jy ! Component: 200 - total flux cleaned = 0.000116815 Jy ! Component: 250 - total flux cleaned = -0.0008423 Jy ! Component: 300 - total flux cleaned = -0.00163511 Jy ! Component: 350 - total flux cleaned = -0.00266171 Jy ! Component: 400 - total flux cleaned = -0.00365446 Jy ! Component: 450 - total flux cleaned = -0.00461637 Jy ! Component: 500 - total flux cleaned = -0.00531847 Jy ! Component: 550 - total flux cleaned = -0.00611879 Jy ! Component: 600 - total flux cleaned = -0.0065635 Jy ! Component: 650 - total flux cleaned = -0.00699756 Jy ! Component: 700 - total flux cleaned = -0.00741822 Jy ! Component: 750 - total flux cleaned = -0.00782949 Jy ! Component: 800 - total flux cleaned = -0.00823273 Jy ! Component: 850 - total flux cleaned = -0.00872231 Jy ! Component: 900 - total flux cleaned = -0.00910654 Jy ! Component: 950 - total flux cleaned = -0.00957247 Jy ! Component: 1000 - total flux cleaned = -0.00966406 Jy ! Component: 1050 - total flux cleaned = -0.0100231 Jy ! Component: 1100 - total flux cleaned = -0.0105472 Jy ! Component: 1150 - total flux cleaned = -0.0105468 Jy ! Component: 1200 - total flux cleaned = -0.0111324 Jy ! Component: 1250 - total flux cleaned = -0.0111302 Jy ! Component: 1300 - total flux cleaned = -0.0117698 Jy ! Component: 1350 - total flux cleaned = -0.0120031 Jy ! Component: 1400 - total flux cleaned = -0.0123077 Jy ! Component: 1450 - total flux cleaned = -0.0124575 Jy ! Component: 1500 - total flux cleaned = -0.0128235 Jy ! Component: 1550 - total flux cleaned = -0.0128952 Jy ! Component: 1600 - total flux cleaned = -0.0131064 Jy ! Component: 1650 - total flux cleaned = -0.0133162 Jy ! Component: 1700 - total flux cleaned = -0.0138592 Jy ! Component: 1750 - total flux cleaned = -0.0141231 Jy ! Component: 1800 - total flux cleaned = -0.0143835 Jy ! Component: 1850 - total flux cleaned = -0.0145117 Jy ! Component: 1900 - total flux cleaned = -0.0147629 Jy ! Component: 1950 - total flux cleaned = -0.0151954 Jy ! Component: 2000 - total flux cleaned = -0.015496 Jy ! Total flux subtracted in 2048 components = -0.0157338 Jy ! Clean residual min=-0.002984 max=0.002944 Jy/beam ! Clean residual mean=-0.000010 rms=0.001257 Jy/beam ! Combined flux in latest and established models = 0.13597 Jy keep ! Adding 165 model components to the UV plane model. ! The established model now contains 207 components and 0.13597 Jy ![Exited script file: muppet] wmap "J0852-1528_S_2005_07_20_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.92 x 7.38 at -5.009 degrees (North through East) ! Clean map min=-0.0060807 max=0.13745 Jy/beam ! Writing clean map to FITS file: J0852-1528_S_2005_07_20_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.137447 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00132425 device "J0852-1528_S_2005_07_20_yyk\_map.eps/VPS" ! Attempting to open device: 'J0852-1528_S_2005_07_20_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.8904 2.8904 5.7808 11.5616 23.1232 46.2464 92.4928 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0039 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.137 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.92 x 7.38 at -5.009 degrees (North through East) ! Clean map min=-0.0060807 max=0.13745 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0852-1528_S_2005_07_20_yyk\_map.gif/gif" ! Attempting to open device: 'J0852-1528_S_2005_07_20_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0852-1528_S_2005_07_20_yyk_uvs.log closed on Fri Jan 20 10:10:11 2006