! Started logfile: J0806-1724_S_2005_07_09_yyk_uvs.log on Fri Jan 20 10:07:34 2006 obs J0806-1724_S_2005_07_09_yyk_uve.fits ! Reading UV FITS file: J0806-1724_S_2005_07_09_yyk_uve.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.9 visibilities/baseline/integration-bin. ! Found source: J0806-1724 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1601 lines of history. ! ! Reading 1620 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0806-1724_S_2005_07_09_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.201097 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.78 mas, bmaj=12.63 mas, bpa=-17.87 degrees ! Estimated noise=1.71345 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.148001 Jy ! Component: 100 - total flux cleaned = 0.180555 Jy ! Total flux subtracted in 100 components = 0.180555 Jy ! Clean residual min=-0.008792 max=0.008885 Jy/beam ! Clean residual mean=0.000017 rms=0.002640 Jy/beam ! Combined flux in latest and established models = 0.180555 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.180555 Jy ! ! Correcting IF 1. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.082320Jy sigma=1.132884 ! Fit after self-cal, rms=0.082102Jy sigma=1.122823 ! Inverting map and beam ! Estimated beam: bmin=2.78 mas, bmaj=12.63 mas, bpa=-17.87 degrees ! Estimated noise=1.71345 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.465 mas, bmaj=15.09 mas, bpa=-17.53 degrees ! Estimated noise=1.19068 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0140822 Jy ! Component: 100 - total flux cleaned = 0.0204157 Jy ! Component: 150 - total flux cleaned = 0.0234412 Jy ! Component: 200 - total flux cleaned = 0.0242574 Jy ! Total flux subtracted in 200 components = 0.0242574 Jy ! Clean residual min=-0.004493 max=0.004239 Jy/beam ! Clean residual mean=-0.000086 rms=0.001304 Jy/beam ! Combined flux in latest and established models = 0.204813 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 41 model components to the UV plane model. ! The established model now contains 54 components and 0.204813 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079992Jy sigma=1.092039 ! Fit after self-cal, rms=0.079960Jy sigma=1.091230 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.465 x 15.09 at -17.53 degrees (North through East) ! Clean map min=-0.0043033 max=0.17438 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00297 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.02 HN 1.07 KP 0.97 ! LA 1.05 MK 0.89 NL 0.95 OV 1.00 ! PT 1.05 SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.973586 ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.99 HN 1.11 KP 0.94 ! LA 1.04 MK 1.05 NL 0.98 OV 0.98 ! PT 1.12 SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.0085 ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 FD 0.95 HN 1.03 KP 1.00 ! LA 0.94 MK 1.00 NL 1.02 OV 0.99 ! PT 1.15 SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.079960Jy sigma=1.091230 ! Fit after self-cal, rms=0.077819Jy sigma=1.073151 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077819Jy sigma=1.073151 ! Fit after self-cal, rms=0.077855Jy sigma=1.073110 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.451 mas, bmaj=14.85 mas, bpa=-17.87 degrees ! Estimated noise=1.19279 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00434648 Jy ! Component: 100 - total flux cleaned = 0.00515408 Jy ! Component: 150 - total flux cleaned = 0.00557932 Jy ! Component: 200 - total flux cleaned = 0.00577273 Jy ! Total flux subtracted in 200 components = 0.00577273 Jy ! Clean residual min=-0.003790 max=0.003620 Jy/beam ! Clean residual mean=0.000013 rms=0.001180 Jy/beam ! Combined flux in latest and established models = 0.210586 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 60 components and 0.210586 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077683Jy sigma=1.069831 ! Fit after self-cal, rms=0.077670Jy sigma=1.069366 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077670Jy sigma=1.069366 ! Fit after self-cal, rms=0.075149Jy sigma=0.996876 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000562268 Jy ! Component: 100 - total flux cleaned = 0.000485813 Jy ! Component: 150 - total flux cleaned = 0.000365073 Jy ! Component: 200 - total flux cleaned = 0.000365764 Jy ! Total flux subtracted in 200 components = 0.000365764 Jy ! Clean residual min=-0.003971 max=0.003740 Jy/beam ! Clean residual mean=0.000019 rms=0.001120 Jy/beam ! Combined flux in latest and established models = 0.210951 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 79 components and 0.210951 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075021Jy sigma=0.995173 ! Fit after self-cal, rms=0.075008Jy sigma=0.991750 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.451 x 14.85 at -17.87 degrees (North through East) ! Clean map min=-0.003912 max=0.17633 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075008Jy sigma=0.991750 ! Fit after self-cal, rms=0.075024Jy sigma=0.981141 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075024Jy sigma=0.981141 ! Fit after self-cal, rms=0.075062Jy sigma=0.980836 ! Inverting map and beam ! Estimated beam: bmin=3.418 mas, bmaj=14.62 mas, bpa=-18.03 degrees ! Estimated noise=1.20836 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00382016 Jy ! Component: 100 - total flux cleaned = 0.00552259 Jy ! Component: 150 - total flux cleaned = 0.00607941 Jy ! Component: 200 - total flux cleaned = 0.00628386 Jy ! Total flux subtracted in 200 components = 0.00628386 Jy ! Clean residual min=-0.003878 max=0.004122 Jy/beam ! Clean residual mean=0.000016 rms=0.001138 Jy/beam ! Combined flux in latest and established models = 0.217235 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 94 components and 0.217235 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074784Jy sigma=0.978226 ! Fit after self-cal, rms=0.074812Jy sigma=0.978154 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074812Jy sigma=0.978154 ! Fit after self-cal, rms=0.072995Jy sigma=0.966653 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072995Jy sigma=0.966653 ! Fit after self-cal, rms=0.073009Jy sigma=0.966513 ! Inverting map and beam ! Estimated beam: bmin=3.343 mas, bmaj=14.59 mas, bpa=-18.15 degrees ! Estimated noise=1.20675 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00254696 Jy ! Component: 100 - total flux cleaned = 0.00317845 Jy ! Component: 150 - total flux cleaned = 0.00365062 Jy ! Component: 200 - total flux cleaned = 0.00400577 Jy ! Total flux subtracted in 200 components = 0.00400577 Jy ! Clean residual min=-0.003963 max=0.003855 Jy/beam ! Clean residual mean=0.000042 rms=0.001134 Jy/beam ! Combined flux in latest and established models = 0.221241 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 110 components and 0.221241 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072842Jy sigma=0.964933 ! Fit after self-cal, rms=0.072855Jy sigma=0.964895 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.137 mas, bmaj=18.77 mas, bpa=-4.365 degrees ! Estimated noise=1.47245 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137371 Jy ! Component: 100 - total flux cleaned = 0.00148626 Jy ! Component: 150 - total flux cleaned = 0.0015785 Jy ! Component: 200 - total flux cleaned = 0.00170831 Jy ! Total flux subtracted in 200 components = 0.00170831 Jy ! Clean residual min=-0.003404 max=0.003782 Jy/beam ! Clean residual mean=0.000067 rms=0.001303 Jy/beam ! Combined flux in latest and established models = 0.222949 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 123 components and 0.222949 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072907Jy sigma=0.965169 ! Fit after self-cal, rms=0.072906Jy sigma=0.965046 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.754 mas, bmaj=12.43 mas, bpa=-18.14 degrees ! Estimated noise=1.69603 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.149566 Jy ! Component: 100 - total flux cleaned = 0.18233 Jy ! Component: 150 - total flux cleaned = 0.196354 Jy ! Component: 200 - total flux cleaned = 0.205044 Jy ! Total flux subtracted in 200 components = 0.205043 Jy ! Clean residual min=-0.006270 max=0.007428 Jy/beam ! Clean residual mean=0.000066 rms=0.001890 Jy/beam ! Combined flux in latest and established models = 0.205044 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 40 model components to the UV plane model. ! The established model now contains 40 components and 0.205044 Jy ! Inverting map and beam ! Estimated beam: bmin=3.343 mas, bmaj=14.59 mas, bpa=-18.15 degrees ! Estimated noise=1.20675 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00782569 Jy ! Component: 100 - total flux cleaned = 0.0117886 Jy ! Component: 150 - total flux cleaned = 0.0141061 Jy ! Component: 200 - total flux cleaned = 0.0150632 Jy ! Total flux subtracted in 200 components = 0.0150632 Jy ! Clean residual min=-0.004023 max=0.003749 Jy/beam ! Clean residual mean=0.000044 rms=0.001150 Jy/beam ! Combined flux in latest and established models = 0.220107 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 67 components and 0.220107 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.137 mas, bmaj=18.77 mas, bpa=-4.365 degrees ! Estimated noise=1.47245 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00196326 Jy ! Component: 100 - total flux cleaned = 0.00220833 Jy ! Component: 150 - total flux cleaned = 0.00245568 Jy ! Component: 200 - total flux cleaned = 0.00259635 Jy ! Total flux subtracted in 200 components = 0.00259635 Jy ! Clean residual min=-0.003397 max=0.003770 Jy/beam ! Clean residual mean=0.000068 rms=0.001316 Jy/beam ! Combined flux in latest and established models = 0.222703 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 78 components and 0.222703 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.343 mas, bmaj=14.59 mas, bpa=-18.15 degrees ! Estimated noise=1.20675 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000414967 Jy ! Component: 100 - total flux cleaned = -0.000449912 Jy ! Component: 150 - total flux cleaned = -0.000482235 Jy ! Component: 200 - total flux cleaned = -0.000535307 Jy ! Total flux subtracted in 200 components = -0.000535307 Jy ! Clean residual min=-0.003978 max=0.003777 Jy/beam ! Clean residual mean=0.000040 rms=0.001124 Jy/beam ! Combined flux in latest and established models = 0.222168 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 90 components and 0.222168 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072881Jy sigma=0.964906 ! Fit after self-cal, rms=0.072890Jy sigma=0.964881 wmodel J0806-1724_S_2005_07_09_yyk\_map.mod ! Writing 90 model components to file: J0806-1724_S_2005_07_09_yyk_map.mod wobs J0806-1724_S_2005_07_09_yyk\_uvs.fits ! Writing UV FITS file: J0806-1724_S_2005_07_09_yyk_uvs.fits wwins J0806-1724_S_2005_07_09_yyk\_map.win ! wwins: Wrote 1 windows to J0806-1724_S_2005_07_09_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000514551 Jy ! Component: 100 - total flux cleaned = -0.000898216 Jy ! Component: 150 - total flux cleaned = -0.0012616 Jy ! Component: 200 - total flux cleaned = -0.00160406 Jy ! Component: 250 - total flux cleaned = -0.00209582 Jy ! Component: 300 - total flux cleaned = -0.00246228 Jy ! Component: 350 - total flux cleaned = -0.00302204 Jy ! Component: 400 - total flux cleaned = -0.00371443 Jy ! Component: 450 - total flux cleaned = -0.00433817 Jy ! Component: 500 - total flux cleaned = -0.00494501 Jy ! Component: 550 - total flux cleaned = -0.00562702 Jy ! Component: 600 - total flux cleaned = -0.006159 Jy ! Component: 650 - total flux cleaned = -0.00641884 Jy ! Component: 700 - total flux cleaned = -0.00671621 Jy ! Component: 750 - total flux cleaned = -0.0068413 Jy ! Component: 800 - total flux cleaned = -0.00712736 Jy ! Component: 850 - total flux cleaned = -0.00736889 Jy ! Component: 900 - total flux cleaned = -0.00772371 Jy ! Component: 950 - total flux cleaned = -0.00787757 Jy ! Component: 1000 - total flux cleaned = -0.0081447 Jy ! Component: 1050 - total flux cleaned = -0.00833208 Jy ! Component: 1100 - total flux cleaned = -0.0086643 Jy ! Component: 1150 - total flux cleaned = -0.00884555 Jy ! Component: 1200 - total flux cleaned = -0.00902439 Jy ! Component: 1250 - total flux cleaned = -0.00927063 Jy ! Component: 1300 - total flux cleaned = -0.00940915 Jy ! Component: 1350 - total flux cleaned = -0.00961343 Jy ! Component: 1400 - total flux cleaned = -0.00978098 Jy ! Component: 1450 - total flux cleaned = -0.00984712 Jy ! Component: 1500 - total flux cleaned = -0.0100106 Jy ! Component: 1550 - total flux cleaned = -0.0101718 Jy ! Component: 1600 - total flux cleaned = -0.010172 Jy ! Component: 1650 - total flux cleaned = -0.0103922 Jy ! Component: 1700 - total flux cleaned = -0.0104542 Jy ! Component: 1750 - total flux cleaned = -0.0104542 Jy ! Component: 1800 - total flux cleaned = -0.0106063 Jy ! Component: 1850 - total flux cleaned = -0.0106372 Jy ! Component: 1900 - total flux cleaned = -0.0106971 Jy ! Component: 1950 - total flux cleaned = -0.0107852 Jy ! Component: 2000 - total flux cleaned = -0.0107855 Jy ! Total flux subtracted in 2048 components = -0.0108719 Jy ! Clean residual min=-0.001715 max=0.001711 Jy/beam ! Clean residual mean=-0.000003 rms=0.000618 Jy/beam ! Combined flux in latest and established models = 0.211296 Jy keep ! Adding 116 model components to the UV plane model. ! The established model now contains 206 components and 0.211296 Jy ![Exited script file: muppet] wmap "J0806-1724_S_2005_07_09_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.343 x 14.59 at -18.15 degrees (North through East) ! Clean map min=-0.0034092 max=0.17684 Jy/beam ! Writing clean map to FITS file: J0806-1724_S_2005_07_09_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.176839 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000619052 device "J0806-1724_S_2005_07_09_yyk\_map.eps/VPS" ! Attempting to open device: 'J0806-1724_S_2005_07_09_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.0502 1.0502 2.1004 4.20079 8.40159 16.8032 33.6063 67.2127 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.176 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.343 x 14.59 at -18.15 degrees (North through East) ! Clean map min=-0.0034092 max=0.17684 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0806-1724_S_2005_07_09_yyk\_map.gif/gif" ! Attempting to open device: 'J0806-1724_S_2005_07_09_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0806-1724_S_2005_07_09_yyk_uvs.log closed on Fri Jan 20 10:07:38 2006