! Started logfile: J0730-1141_S_2005_07_20_yyk_uvs.log on Fri Jan 20 10:04:47 2006 obs J0730-1141_S_2005_07_20_yyk_uve.fits ! Reading UV FITS file: J0730-1141_S_2005_07_20_yyk_uve.fits ! AN table 1: 5 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.764444 visibilities/baseline/integration-bin. ! Found source: J0730-1141 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1526 lines of history. ! ! Reading 688 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0730-1141_S_2005_07_20_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 2.73795 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.578 mas, bmaj=6.928 mas, bpa=1.659 degrees ! Estimated noise=2.19187 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.25784 Jy ! Component: 100 - total flux cleaned = 2.68308 Jy ! Total flux subtracted in 100 components = 2.68308 Jy ! Clean residual min=-0.066626 max=0.119461 Jy/beam ! Clean residual mean=0.000486 rms=0.022723 Jy/beam ! Combined flux in latest and established models = 2.68308 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 2.68308 Jy ! ! Correcting IF 1. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.348557Jy sigma=5.102419 ! Fit after self-cal, rms=0.348035Jy sigma=5.095004 ! Inverting map and beam ! Estimated beam: bmin=2.578 mas, bmaj=6.928 mas, bpa=1.659 degrees ! Estimated noise=2.19187 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.196 mas, bmaj=8.017 mas, bpa=1.736 degrees ! Estimated noise=1.778 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.196032 Jy ! Component: 100 - total flux cleaned = 0.267802 Jy ! Component: 150 - total flux cleaned = 0.296924 Jy ! Component: 200 - total flux cleaned = 0.307654 Jy ! Total flux subtracted in 200 components = 0.307654 Jy ! Clean residual min=-0.057009 max=0.046711 Jy/beam ! Clean residual mean=-0.001423 rms=0.012950 Jy/beam ! Combined flux in latest and established models = 2.99074 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 36 components and 2.99074 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.247819Jy sigma=3.694633 ! Fit after self-cal, rms=0.247240Jy sigma=3.689518 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.196 x 8.017 at 1.736 degrees (North through East) ! Clean map min=-0.054695 max=2.6381 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01279 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.03 HN 1.02 KP 0.96 ! LA 1.07 MK 0.89 NL 0.93 OV 0.99 ! PT 1.06 SC 0.94 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.986485 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.03 HN 1.04 KP 0.99 ! LA 1.04 MK 0.98 NL 0.97 OV 1.04 ! PT 1.01 SC 1.00 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.00131 ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 0.95 HN 1.01 KP 0.97 ! LA 0.93 MK 1.11 NL 1.03 OV 1.02 ! PT 1.07 SC 1.02 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.01798 ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.98 HN 0.91 KP 0.89 ! LA 1.00* MK 1.08 NL 0.94 OV 0.88 ! PT 0.99 SC 1.08 ! ! ! Fit before self-cal, rms=0.247240Jy sigma=3.689518 ! Fit after self-cal, rms=0.123211Jy sigma=1.893528 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123211Jy sigma=1.893528 ! Fit after self-cal, rms=0.123224Jy sigma=1.893403 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.232 mas, bmaj=8.084 mas, bpa=1.77 degrees ! Estimated noise=1.78942 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6, 8.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0470867 Jy ! Component: 100 - total flux cleaned = 0.067493 Jy ! Component: 150 - total flux cleaned = 0.0717563 Jy ! Component: 200 - total flux cleaned = 0.0721823 Jy ! Total flux subtracted in 200 components = 0.0721823 Jy ! Clean residual min=-0.016251 max=0.016318 Jy/beam ! Clean residual mean=0.000105 rms=0.003913 Jy/beam ! Combined flux in latest and established models = 3.06292 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 56 components and 3.06292 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109162Jy sigma=1.667909 ! Fit after self-cal, rms=0.108614Jy sigma=1.661425 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108614Jy sigma=1.661425 ! Fit after self-cal, rms=0.106453Jy sigma=1.624265 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00321219 Jy ! Component: 100 - total flux cleaned = 0.00479361 Jy ! Component: 150 - total flux cleaned = 0.00534477 Jy ! Component: 200 - total flux cleaned = 0.00607452 Jy ! Total flux subtracted in 200 components = 0.00607452 Jy ! Clean residual min=-0.016134 max=0.013378 Jy/beam ! Clean residual mean=0.000056 rms=0.003611 Jy/beam ! Combined flux in latest and established models = 3.06899 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 67 components and 3.06899 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105157Jy sigma=1.604250 ! Fit after self-cal, rms=0.104920Jy sigma=1.601329 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.232 x 8.084 at 1.77 degrees (North through East) ! Clean map min=-0.014967 max=2.6666 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104920Jy sigma=1.601329 ! Fit after self-cal, rms=0.078297Jy sigma=1.186748 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078297Jy sigma=1.186748 ! Fit after self-cal, rms=0.078301Jy sigma=1.186592 ! Inverting map and beam ! Estimated beam: bmin=3.23 mas, bmaj=8.078 mas, bpa=1.698 degrees ! Estimated noise=1.78705 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00996566 Jy ! Component: 100 - total flux cleaned = 0.0133721 Jy ! Component: 150 - total flux cleaned = 0.014757 Jy ! Component: 200 - total flux cleaned = 0.0156042 Jy ! Total flux subtracted in 200 components = 0.0156042 Jy ! Clean residual min=-0.010564 max=0.009803 Jy/beam ! Clean residual mean=0.000237 rms=0.002723 Jy/beam ! Combined flux in latest and established models = 3.0846 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 91 components and 3.0846 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077107Jy sigma=1.164163 ! Fit after self-cal, rms=0.076874Jy sigma=1.161643 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076874Jy sigma=1.161643 ! Fit after self-cal, rms=0.069946Jy sigma=1.055522 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069946Jy sigma=1.055522 ! Fit after self-cal, rms=0.069945Jy sigma=1.055519 ! Inverting map and beam ! Estimated beam: bmin=3.223 mas, bmaj=8.066 mas, bpa=1.674 degrees ! Estimated noise=1.78985 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00901771 Jy ! Component: 100 - total flux cleaned = 0.0140955 Jy ! Component: 150 - total flux cleaned = 0.0158202 Jy ! Component: 200 - total flux cleaned = 0.016628 Jy ! Total flux subtracted in 200 components = 0.016628 Jy ! Clean residual min=-0.009613 max=0.008158 Jy/beam ! Clean residual mean=0.000232 rms=0.002467 Jy/beam ! Combined flux in latest and established models = 3.10123 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 111 components and 3.10123 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068780Jy sigma=1.038961 ! Fit after self-cal, rms=0.068641Jy sigma=1.037578 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.701 mas, bmaj=16.02 mas, bpa=8.758 degrees ! Estimated noise=2.24894 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000982954 Jy ! Component: 100 - total flux cleaned = 0.000857792 Jy ! Component: 150 - total flux cleaned = 0.00100081 Jy ! Component: 200 - total flux cleaned = 0.00124264 Jy ! Total flux subtracted in 200 components = 0.00124264 Jy ! Clean residual min=-0.007606 max=0.010879 Jy/beam ! Clean residual mean=0.000425 rms=0.003100 Jy/beam ! Combined flux in latest and established models = 3.10247 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 131 components and 3.10247 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068822Jy sigma=1.036245 ! Fit after self-cal, rms=0.068505Jy sigma=1.032805 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.587 mas, bmaj=6.939 mas, bpa=1.55 degrees ! Estimated noise=2.1949 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.25964 Jy ! Component: 100 - total flux cleaned = 2.68507 Jy ! Component: 150 - total flux cleaned = 2.85029 Jy ! Component: 200 - total flux cleaned = 2.9336 Jy ! Total flux subtracted in 200 components = 2.9336 Jy ! Clean residual min=-0.021141 max=0.031619 Jy/beam ! Clean residual mean=0.000771 rms=0.007161 Jy/beam ! Combined flux in latest and established models = 2.9336 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 2.9336 Jy ! Inverting map and beam ! Estimated beam: bmin=3.223 mas, bmaj=8.066 mas, bpa=1.674 degrees ! Estimated noise=1.78985 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0670161 Jy ! Component: 100 - total flux cleaned = 0.103297 Jy ! Component: 150 - total flux cleaned = 0.125558 Jy ! Component: 200 - total flux cleaned = 0.139983 Jy ! Total flux subtracted in 200 components = 0.139983 Jy ! Clean residual min=-0.009079 max=0.010041 Jy/beam ! Clean residual mean=0.000423 rms=0.002765 Jy/beam ! Combined flux in latest and established models = 3.07358 Jy ! Adding 74 model components to the UV plane model. ! The established model now contains 97 components and 3.07358 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.701 mas, bmaj=16.02 mas, bpa=8.758 degrees ! Estimated noise=2.24894 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0143103 Jy ! Component: 100 - total flux cleaned = 0.021921 Jy ! Component: 150 - total flux cleaned = 0.0264367 Jy ! Component: 200 - total flux cleaned = 0.0274714 Jy ! Total flux subtracted in 200 components = 0.0274714 Jy ! Clean residual min=-0.006872 max=0.010656 Jy/beam ! Clean residual mean=0.000440 rms=0.002892 Jy/beam ! Combined flux in latest and established models = 3.10106 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 130 components and 3.10106 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.223 mas, bmaj=8.066 mas, bpa=1.674 degrees ! Estimated noise=1.78985 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 8.39431e-05 Jy ! Component: 100 - total flux cleaned = 0.00060732 Jy ! Component: 150 - total flux cleaned = 0.00105852 Jy ! Component: 200 - total flux cleaned = 0.0011928 Jy ! Total flux subtracted in 200 components = 0.0011928 Jy ! Clean residual min=-0.008241 max=0.009209 Jy/beam ! Clean residual mean=0.000218 rms=0.002182 Jy/beam ! Combined flux in latest and established models = 3.10225 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 146 components and 3.10225 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067990Jy sigma=1.025809 ! Fit after self-cal, rms=0.067737Jy sigma=1.023303 wmodel J0730-1141_S_2005_07_20_yyk\_map.mod ! Writing 146 model components to file: J0730-1141_S_2005_07_20_yyk_map.mod wobs J0730-1141_S_2005_07_20_yyk\_uvs.fits ! Writing UV FITS file: J0730-1141_S_2005_07_20_yyk_uvs.fits wwins J0730-1141_S_2005_07_20_yyk\_map.win ! wwins: Wrote 2 windows to J0730-1141_S_2005_07_20_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000471821 Jy ! Component: 100 - total flux cleaned = 0.000353778 Jy ! Component: 150 - total flux cleaned = 0.000234131 Jy ! Component: 200 - total flux cleaned = 0.000232064 Jy ! Component: 250 - total flux cleaned = 0.0002321 Jy ! Component: 300 - total flux cleaned = -5.363e-05 Jy ! Component: 350 - total flux cleaned = -0.000510461 Jy ! Component: 400 - total flux cleaned = -0.000684466 Jy ! Component: 450 - total flux cleaned = -0.000770431 Jy ! Component: 500 - total flux cleaned = -0.00092968 Jy ! Component: 550 - total flux cleaned = -0.000929068 Jy ! Component: 600 - total flux cleaned = -0.00114564 Jy ! Component: 650 - total flux cleaned = -0.00163782 Jy ! Component: 700 - total flux cleaned = -0.00184393 Jy ! Component: 750 - total flux cleaned = -0.00230848 Jy ! Component: 800 - total flux cleaned = -0.0023724 Jy ! Component: 850 - total flux cleaned = -0.00262312 Jy ! Component: 900 - total flux cleaned = -0.00292716 Jy ! Component: 950 - total flux cleaned = -0.00286571 Jy ! Component: 1000 - total flux cleaned = -0.0029843 Jy ! Component: 1050 - total flux cleaned = -0.003325 Jy ! Component: 1100 - total flux cleaned = -0.00343552 Jy ! Component: 1150 - total flux cleaned = -0.00370904 Jy ! Component: 1200 - total flux cleaned = -0.00413347 Jy ! Component: 1250 - total flux cleaned = -0.00439423 Jy ! Component: 1300 - total flux cleaned = -0.00464937 Jy ! Component: 1350 - total flux cleaned = -0.00489976 Jy ! Component: 1400 - total flux cleaned = -0.00519261 Jy ! Component: 1450 - total flux cleaned = -0.00533578 Jy ! Component: 1500 - total flux cleaned = -0.00552314 Jy ! Component: 1550 - total flux cleaned = -0.00570855 Jy ! Component: 1600 - total flux cleaned = -0.00566435 Jy ! Component: 1650 - total flux cleaned = -0.00593194 Jy ! Component: 1700 - total flux cleaned = -0.00580075 Jy ! Component: 1750 - total flux cleaned = -0.00584398 Jy ! Component: 1800 - total flux cleaned = -0.00575903 Jy ! Component: 1850 - total flux cleaned = -0.00584242 Jy ! Component: 1900 - total flux cleaned = -0.0058826 Jy ! Component: 1950 - total flux cleaned = -0.00584262 Jy ! Component: 2000 - total flux cleaned = -0.00580312 Jy ! Total flux subtracted in 2048 components = -0.00592222 Jy ! Clean residual min=-0.002865 max=0.002292 Jy/beam ! Clean residual mean=0.000025 rms=0.000789 Jy/beam ! Combined flux in latest and established models = 3.09633 Jy keep ! Adding 133 model components to the UV plane model. ! The established model now contains 279 components and 3.09633 Jy ![Exited script file: muppet] wmap "J0730-1141_S_2005_07_20_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.223 x 8.066 at 1.674 degrees (North through East) ! Clean map min=-0.0053808 max=2.6682 Jy/beam ! Writing clean map to FITS file: J0730-1141_S_2005_07_20_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 2.66823 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000775256 device "J0730-1141_S_2005_07_20_yyk\_map.eps/VPS" ! Attempting to open device: 'J0730-1141_S_2005_07_20_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0871652 0.0871652 0.17433 0.348661 0.697322 1.39464 2.78929 5.57858 11.1572 22.3143 44.6286 89.2572 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0023 print "peak=",int(peak_flux*1000)/1000 ! peak= 2.668 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.223 x 8.066 at 1.674 degrees (North through East) ! Clean map min=-0.0053808 max=2.6682 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0730-1141_S_2005_07_20_yyk\_map.gif/gif" ! Attempting to open device: 'J0730-1141_S_2005_07_20_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0730-1141_S_2005_07_20_yyk_uvs.log closed on Fri Jan 20 10:04:51 2006