! Started logfile: J0730-1141_S_2005_07_09_yyk_uvs.log on Fri Jan 20 10:04:43 2006 obs J0730-1141_S_2005_07_09_yyk_uve.fits ! Reading UV FITS file: J0730-1141_S_2005_07_09_yyk_uve.fits ! AN table 1: 5 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.96 visibilities/baseline/integration-bin. ! Found source: J0730-1141 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1601 lines of history. ! ! Reading 864 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0730-1141_S_2005_07_09_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 2.62224 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.765 mas, bmaj=6.752 mas, bpa=3.514 degrees ! Estimated noise=2.40476 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.18042 Jy ! Component: 100 - total flux cleaned = 2.59601 Jy ! Total flux subtracted in 100 components = 2.59601 Jy ! Clean residual min=-0.074475 max=0.121154 Jy/beam ! Clean residual mean=0.001365 rms=0.025508 Jy/beam ! Combined flux in latest and established models = 2.59601 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 2.59601 Jy ! ! Correcting IF 1. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.339532Jy sigma=4.660452 ! Fit after self-cal, rms=0.338972Jy sigma=4.654843 ! Inverting map and beam ! Estimated beam: bmin=2.765 mas, bmaj=6.752 mas, bpa=3.514 degrees ! Estimated noise=2.40476 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.467 mas, bmaj=8.264 mas, bpa=3.148 degrees ! Estimated noise=1.69057 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.171788 Jy ! Component: 100 - total flux cleaned = 0.237923 Jy ! Component: 150 - total flux cleaned = 0.26725 Jy ! Component: 200 - total flux cleaned = 0.278981 Jy ! Total flux subtracted in 200 components = 0.278981 Jy ! Clean residual min=-0.059863 max=0.047510 Jy/beam ! Clean residual mean=-0.001690 rms=0.014657 Jy/beam ! Combined flux in latest and established models = 2.87499 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 44 model components to the UV plane model. ! The established model now contains 51 components and 2.87499 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.266932Jy sigma=3.686064 ! Fit after self-cal, rms=0.266479Jy sigma=3.681194 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.467 x 8.264 at 3.148 degrees (North through East) ! Clean map min=-0.057361 max=2.5364 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00633 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.03 HN 1.08 KP 0.96 ! LA 1.05 MK 0.90 NL 0.93 OV 0.98 ! PT 1.06 SC 0.94 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.985643 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.01 HN 1.08 KP 0.99 ! LA 1.03 MK 0.98 NL 0.97 OV 1.03 ! PT 1.04 SC 1.00 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.978737 ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.94 HN 1.06 KP 0.97 ! LA 0.92 MK 1.10 NL 1.03 OV 1.02 ! PT 1.08 SC 1.02 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.03496 ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.96 HN 0.94 KP 0.88 ! LA 1.00* MK 1.08 NL 0.95 OV 0.88 ! PT 0.98 SC 1.10 ! ! ! Fit before self-cal, rms=0.266479Jy sigma=3.681194 ! Fit after self-cal, rms=0.154653Jy sigma=2.108194 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154653Jy sigma=2.108194 ! Fit after self-cal, rms=0.154677Jy sigma=2.108131 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.52 mas, bmaj=8.346 mas, bpa=3.254 degrees ! Estimated noise=1.68374 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6.5, 8.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0274277 Jy ! Component: 100 - total flux cleaned = 0.0255491 Jy ! Component: 150 - total flux cleaned = 0.0234572 Jy ! Component: 200 - total flux cleaned = 0.0218273 Jy ! Total flux subtracted in 200 components = 0.0218273 Jy ! Clean residual min=-0.014528 max=0.015942 Jy/beam ! Clean residual mean=-0.000271 rms=0.004342 Jy/beam ! Combined flux in latest and established models = 2.89682 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 81 components and 2.89682 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146739Jy sigma=1.979639 ! Fit after self-cal, rms=0.146672Jy sigma=1.975045 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146672Jy sigma=1.975045 ! Fit after self-cal, rms=0.142703Jy sigma=1.922066 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000362383 Jy ! Component: 100 - total flux cleaned = 0.000931065 Jy ! Component: 150 - total flux cleaned = 0.000704584 Jy ! Component: 200 - total flux cleaned = 0.000930979 Jy ! Total flux subtracted in 200 components = 0.000930979 Jy ! Clean residual min=-0.014210 max=0.013452 Jy/beam ! Clean residual mean=-0.000281 rms=0.003969 Jy/beam ! Combined flux in latest and established models = 2.89775 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 103 components and 2.89775 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141719Jy sigma=1.909336 ! Fit after self-cal, rms=0.141245Jy sigma=1.903684 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.52 x 8.346 at 3.254 degrees (North through East) ! Clean map min=-0.01403 max=2.5482 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141245Jy sigma=1.903684 ! Fit after self-cal, rms=0.089565Jy sigma=1.081480 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089565Jy sigma=1.081480 ! Fit after self-cal, rms=0.089549Jy sigma=1.080629 ! Inverting map and beam ! Estimated beam: bmin=3.517 mas, bmaj=8.342 mas, bpa=3.24 degrees ! Estimated noise=1.68063 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00874949 Jy ! Component: 100 - total flux cleaned = 0.0108639 Jy ! Component: 150 - total flux cleaned = 0.0117654 Jy ! Component: 200 - total flux cleaned = 0.0120881 Jy ! Total flux subtracted in 200 components = 0.0120881 Jy ! Clean residual min=-0.009119 max=0.008889 Jy/beam ! Clean residual mean=0.000208 rms=0.002466 Jy/beam ! Combined flux in latest and established models = 2.90984 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 121 components and 2.90984 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088520Jy sigma=1.061993 ! Fit after self-cal, rms=0.088384Jy sigma=1.060011 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088384Jy sigma=1.060011 ! Fit after self-cal, rms=0.082617Jy sigma=0.974305 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082617Jy sigma=0.974305 ! Fit after self-cal, rms=0.082625Jy sigma=0.974292 ! Inverting map and beam ! Estimated beam: bmin=3.517 mas, bmaj=8.339 mas, bpa=3.244 degrees ! Estimated noise=1.68062 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00480965 Jy ! Component: 100 - total flux cleaned = 0.00593859 Jy ! Component: 150 - total flux cleaned = 0.00660827 Jy ! Component: 200 - total flux cleaned = 0.00695769 Jy ! Total flux subtracted in 200 components = 0.00695769 Jy ! Clean residual min=-0.007920 max=0.008134 Jy/beam ! Clean residual mean=0.000204 rms=0.002190 Jy/beam ! Combined flux in latest and established models = 2.9168 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 139 components and 2.9168 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082090Jy sigma=0.965674 ! Fit after self-cal, rms=0.081978Jy sigma=0.964641 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.998 mas, bmaj=16.6 mas, bpa=13.92 degrees ! Estimated noise=2.04779 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00105551 Jy ! Component: 100 - total flux cleaned = 1.38079e-05 Jy ! Component: 150 - total flux cleaned = 0.000189282 Jy ! Component: 200 - total flux cleaned = 0.000266171 Jy ! Total flux subtracted in 200 components = 0.000266171 Jy ! Clean residual min=-0.007057 max=0.009924 Jy/beam ! Clean residual mean=0.000357 rms=0.002534 Jy/beam ! Combined flux in latest and established models = 2.91706 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 164 components and 2.91706 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081807Jy sigma=0.963242 ! Fit after self-cal, rms=0.081597Jy sigma=0.961655 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.796 mas, bmaj=6.783 mas, bpa=3.435 degrees ! Estimated noise=2.38002 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.15712 Jy ! Component: 100 - total flux cleaned = 2.54965 Jy ! Component: 150 - total flux cleaned = 2.70353 Jy ! Component: 200 - total flux cleaned = 2.77848 Jy ! Total flux subtracted in 200 components = 2.77848 Jy ! Clean residual min=-0.020142 max=0.028303 Jy/beam ! Clean residual mean=0.001075 rms=0.007110 Jy/beam ! Combined flux in latest and established models = 2.77849 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 38 model components to the UV plane model. ! The established model now contains 38 components and 2.77849 Jy ! Inverting map and beam ! Estimated beam: bmin=3.517 mas, bmaj=8.339 mas, bpa=3.244 degrees ! Estimated noise=1.68062 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0599111 Jy ! Component: 100 - total flux cleaned = 0.0919387 Jy ! Component: 150 - total flux cleaned = 0.110678 Jy ! Component: 200 - total flux cleaned = 0.122314 Jy ! Total flux subtracted in 200 components = 0.122314 Jy ! Clean residual min=-0.007754 max=0.007612 Jy/beam ! Clean residual mean=0.000388 rms=0.002462 Jy/beam ! Combined flux in latest and established models = 2.9008 Jy ! Adding 63 model components to the UV plane model. ! The established model now contains 91 components and 2.9008 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.998 mas, bmaj=16.6 mas, bpa=13.92 degrees ! Estimated noise=2.04779 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0105038 Jy ! Component: 100 - total flux cleaned = 0.0161335 Jy ! Component: 150 - total flux cleaned = 0.0183758 Jy ! Component: 200 - total flux cleaned = 0.0191946 Jy ! Total flux subtracted in 200 components = 0.0191946 Jy ! Clean residual min=-0.007003 max=0.009789 Jy/beam ! Clean residual mean=0.000296 rms=0.002552 Jy/beam ! Combined flux in latest and established models = 2.91999 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 128 components and 2.91999 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.517 mas, bmaj=8.339 mas, bpa=3.244 degrees ! Estimated noise=1.68062 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00135906 Jy ! Component: 100 - total flux cleaned = -0.000899819 Jy ! Component: 150 - total flux cleaned = -0.000417899 Jy ! Component: 200 - total flux cleaned = -0.000112737 Jy ! Total flux subtracted in 200 components = -0.000112737 Jy ! Clean residual min=-0.006905 max=0.006808 Jy/beam ! Clean residual mean=0.000166 rms=0.002018 Jy/beam ! Combined flux in latest and established models = 2.91988 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 152 components and 2.91988 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081286Jy sigma=0.953984 ! Fit after self-cal, rms=0.081055Jy sigma=0.952535 wmodel J0730-1141_S_2005_07_09_yyk\_map.mod ! Writing 152 model components to file: J0730-1141_S_2005_07_09_yyk_map.mod wobs J0730-1141_S_2005_07_09_yyk\_uvs.fits ! Writing UV FITS file: J0730-1141_S_2005_07_09_yyk_uvs.fits wwins J0730-1141_S_2005_07_09_yyk\_map.win ! wwins: Wrote 2 windows to J0730-1141_S_2005_07_09_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0013882 Jy ! Component: 100 - total flux cleaned = -0.00228509 Jy ! Component: 150 - total flux cleaned = -0.00331347 Jy ! Component: 200 - total flux cleaned = -0.00456029 Jy ! Component: 250 - total flux cleaned = -0.00564819 Jy ! Component: 300 - total flux cleaned = -0.00633615 Jy ! Component: 350 - total flux cleaned = -0.00665897 Jy ! Component: 400 - total flux cleaned = -0.00665723 Jy ! Component: 450 - total flux cleaned = -0.00643542 Jy ! Component: 500 - total flux cleaned = -0.00679398 Jy ! Component: 550 - total flux cleaned = -0.00699853 Jy ! Component: 600 - total flux cleaned = -0.0072656 Jy ! Component: 650 - total flux cleaned = -0.00771732 Jy ! Component: 700 - total flux cleaned = -0.00815443 Jy ! Component: 750 - total flux cleaned = -0.00845874 Jy ! Component: 800 - total flux cleaned = -0.00881235 Jy ! Component: 850 - total flux cleaned = -0.00910018 Jy ! Component: 900 - total flux cleaned = -0.00954651 Jy ! Component: 950 - total flux cleaned = -0.00998013 Jy ! Component: 1000 - total flux cleaned = -0.0101909 Jy ! Component: 1050 - total flux cleaned = -0.0103966 Jy ! Component: 1100 - total flux cleaned = -0.0105976 Jy ! Component: 1150 - total flux cleaned = -0.010843 Jy ! Component: 1200 - total flux cleaned = -0.0109868 Jy ! Component: 1250 - total flux cleaned = -0.011129 Jy ! Component: 1300 - total flux cleaned = -0.0114048 Jy ! Component: 1350 - total flux cleaned = -0.0115841 Jy ! Component: 1400 - total flux cleaned = -0.0118469 Jy ! Component: 1450 - total flux cleaned = -0.0118895 Jy ! Component: 1500 - total flux cleaned = -0.0120587 Jy ! Component: 1550 - total flux cleaned = -0.0123064 Jy ! Component: 1600 - total flux cleaned = -0.0123466 Jy ! Component: 1650 - total flux cleaned = -0.0124669 Jy ! Component: 1700 - total flux cleaned = -0.0125457 Jy ! Component: 1750 - total flux cleaned = -0.012662 Jy ! Component: 1800 - total flux cleaned = -0.0127381 Jy ! Component: 1850 - total flux cleaned = -0.0128499 Jy ! Component: 1900 - total flux cleaned = -0.0129595 Jy ! Component: 1950 - total flux cleaned = -0.0130315 Jy ! Component: 2000 - total flux cleaned = -0.0130668 Jy ! Total flux subtracted in 2048 components = -0.0131017 Jy ! Clean residual min=-0.001912 max=0.001728 Jy/beam ! Clean residual mean=0.000043 rms=0.000715 Jy/beam ! Combined flux in latest and established models = 2.90678 Jy keep ! Adding 138 model components to the UV plane model. ! The established model now contains 290 components and 2.90678 Jy ![Exited script file: muppet] wmap "J0730-1141_S_2005_07_09_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.517 x 8.339 at 3.244 degrees (North through East) ! Clean map min=-0.0046483 max=2.5497 Jy/beam ! Writing clean map to FITS file: J0730-1141_S_2005_07_09_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 2.54972 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00070345 device "J0730-1141_S_2005_07_09_yyk\_map.eps/VPS" ! Attempting to open device: 'J0730-1141_S_2005_07_09_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0827678 0.0827678 0.165536 0.331071 0.662143 1.32429 2.64857 5.29714 10.5943 21.1886 42.3771 84.7542 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak=",int(peak_flux*1000)/1000 ! peak= 2.549 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.517 x 8.339 at 3.244 degrees (North through East) ! Clean map min=-0.0046483 max=2.5497 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0730-1141_S_2005_07_09_yyk\_map.gif/gif" ! Attempting to open device: 'J0730-1141_S_2005_07_09_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0730-1141_S_2005_07_09_yyk_uvs.log closed on Fri Jan 20 10:04:47 2006