! Started logfile: J0709-0255_S_2005_07_08_yyk_uvs.log on Fri Jan 20 10:03:30 2006 obs J0709-0255_S_2005_07_08_yyk_uve.fits ! Reading UV FITS file: J0709-0255_S_2005_07_08_yyk_uve.fits ! AN table 1: 12 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.877778 visibilities/baseline/integration-bin. ! Found source: J0709-0255 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1412 lines of history. ! ! Reading 1896 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0709-0255_S_2005_07_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.152534 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.778 mas, bmaj=6.512 mas, bpa=-3.192 degrees ! Estimated noise=1.25132 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.117552 Jy ! Component: 100 - total flux cleaned = 0.137484 Jy ! Total flux subtracted in 100 components = 0.137484 Jy ! Clean residual min=-0.006389 max=0.006527 Jy/beam ! Clean residual mean=0.000014 rms=0.001507 Jy/beam ! Combined flux in latest and established models = 0.137484 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.137484 Jy ! ! Correcting IF 1. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.061922Jy sigma=1.129566 ! Fit after self-cal, rms=0.062738Jy sigma=1.093974 ! Inverting map and beam ! Estimated beam: bmin=2.779 mas, bmaj=6.513 mas, bpa=-3.19 degrees ! Estimated noise=1.25104 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.377 mas, bmaj=8.14 mas, bpa=-3.094 degrees ! Estimated noise=0.926296 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00511174 Jy ! Component: 100 - total flux cleaned = 0.00563858 Jy ! Component: 150 - total flux cleaned = 0.00556392 Jy ! Component: 200 - total flux cleaned = 0.00549953 Jy ! Total flux subtracted in 200 components = 0.00549953 Jy ! Clean residual min=-0.005335 max=0.005764 Jy/beam ! Clean residual mean=-0.000013 rms=0.001708 Jy/beam ! Combined flux in latest and established models = 0.142983 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 26 components and 0.142983 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062183Jy sigma=1.087639 ! Fit after self-cal, rms=0.062177Jy sigma=1.087518 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.377 x 8.14 at -3.094 degrees (North through East) ! Clean map min=-0.0051559 max=0.13498 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01837 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.08 HN 0.94 KP 0.93 ! LA 1.07 MK 0.90 NL 0.89 OV 0.98 ! PT 1.07 SC 0.96 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.984018 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 1.08 KP 1.04 ! LA 1.08 MK 0.98 NL 0.99 OV 0.98 ! PT 1.04 SC 0.99 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.989946 ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.92 HN 1.01 KP 1.01 ! LA 0.93 MK 1.14 NL 0.96 OV 0.99 ! PT 1.04 SC 1.04 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.062177Jy sigma=1.087518 ! Fit after self-cal, rms=0.061362Jy sigma=1.075432 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061362Jy sigma=1.075432 ! Fit after self-cal, rms=0.061357Jy sigma=1.075396 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.366 mas, bmaj=8.114 mas, bpa=-3.088 degrees ! Estimated noise=0.924937 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101489 Jy ! Component: 100 - total flux cleaned = 0.00110624 Jy ! Component: 150 - total flux cleaned = 0.00118411 Jy ! Component: 200 - total flux cleaned = 0.00121881 Jy ! Total flux subtracted in 200 components = 0.00121881 Jy ! Clean residual min=-0.004937 max=0.004782 Jy/beam ! Clean residual mean=0.000004 rms=0.001632 Jy/beam ! Combined flux in latest and established models = 0.144202 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 35 components and 0.144202 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061267Jy sigma=1.074441 ! Fit after self-cal, rms=0.061248Jy sigma=1.074336 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061248Jy sigma=1.074336 ! Fit after self-cal, rms=0.055693Jy sigma=0.950228 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00289409 Jy ! Component: 100 - total flux cleaned = 0.00395318 Jy ! Component: 150 - total flux cleaned = 0.00402524 Jy ! Component: 200 - total flux cleaned = 0.00406626 Jy ! Total flux subtracted in 200 components = 0.00406627 Jy ! Clean residual min=-0.003598 max=0.003258 Jy/beam ! Clean residual mean=0.000005 rms=0.000977 Jy/beam ! Combined flux in latest and established models = 0.148268 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 45 components and 0.148268 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055461Jy sigma=0.948248 ! Fit after self-cal, rms=0.055014Jy sigma=0.940778 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.366 x 8.114 at -3.088 degrees (North through East) ! Clean map min=-0.0034667 max=0.1373 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055014Jy sigma=0.940778 ! Fit after self-cal, rms=0.055194Jy sigma=0.932527 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055194Jy sigma=0.932527 ! Fit after self-cal, rms=0.055153Jy sigma=0.931644 ! Inverting map and beam ! Estimated beam: bmin=3.327 mas, bmaj=8.061 mas, bpa=-3.163 degrees ! Estimated noise=0.933946 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00222877 Jy ! Component: 100 - total flux cleaned = 0.00290193 Jy ! Component: 150 - total flux cleaned = 0.00300207 Jy ! Component: 200 - total flux cleaned = 0.00306946 Jy ! Total flux subtracted in 200 components = 0.00306946 Jy ! Clean residual min=-0.003699 max=0.003570 Jy/beam ! Clean residual mean=-0.000006 rms=0.000999 Jy/beam ! Combined flux in latest and established models = 0.151338 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 51 components and 0.151338 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054993Jy sigma=0.930461 ! Fit after self-cal, rms=0.054992Jy sigma=0.930308 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054992Jy sigma=0.930308 ! Fit after self-cal, rms=0.055165Jy sigma=0.921012 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055165Jy sigma=0.921012 ! Fit after self-cal, rms=0.055171Jy sigma=0.920939 ! Inverting map and beam ! Estimated beam: bmin=3.285 mas, bmaj=7.986 mas, bpa=-3.282 degrees ! Estimated noise=0.946014 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00256291 Jy ! Component: 100 - total flux cleaned = 0.00355546 Jy ! Component: 150 - total flux cleaned = 0.00385252 Jy ! Component: 200 - total flux cleaned = 0.00388033 Jy ! Total flux subtracted in 200 components = 0.00388033 Jy ! Clean residual min=-0.003789 max=0.003840 Jy/beam ! Clean residual mean=-0.000005 rms=0.001030 Jy/beam ! Combined flux in latest and established models = 0.155218 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 58 components and 0.155218 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054975Jy sigma=0.919414 ! Fit after self-cal, rms=0.054978Jy sigma=0.919386 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.874 mas, bmaj=12.96 mas, bpa=-7.174 degrees ! Estimated noise=1.20153 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000513458 Jy ! Component: 100 - total flux cleaned = -0.000604896 Jy ! Component: 150 - total flux cleaned = -0.000682621 Jy ! Component: 200 - total flux cleaned = -0.000750257 Jy ! Total flux subtracted in 200 components = -0.000750257 Jy ! Clean residual min=-0.003834 max=0.004539 Jy/beam ! Clean residual mean=-0.000007 rms=0.001516 Jy/beam ! Combined flux in latest and established models = 0.154468 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 64 components and 0.154468 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054989Jy sigma=0.919462 ! Fit after self-cal, rms=0.054989Jy sigma=0.919436 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.748 mas, bmaj=6.461 mas, bpa=-3.379 degrees ! Estimated noise=1.2634 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.120599 Jy ! Component: 100 - total flux cleaned = 0.142347 Jy ! Component: 150 - total flux cleaned = 0.1508 Jy ! Component: 200 - total flux cleaned = 0.155378 Jy ! Total flux subtracted in 200 components = 0.155378 Jy ! Clean residual min=-0.004097 max=0.004931 Jy/beam ! Clean residual mean=0.000009 rms=0.001248 Jy/beam ! Combined flux in latest and established models = 0.155378 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.155378 Jy ! Inverting map and beam ! Estimated beam: bmin=3.285 mas, bmaj=7.986 mas, bpa=-3.282 degrees ! Estimated noise=0.946014 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000404983 Jy ! Component: 100 - total flux cleaned = 0.000450602 Jy ! Component: 150 - total flux cleaned = 0.000411212 Jy ! Component: 200 - total flux cleaned = 0.000345094 Jy ! Total flux subtracted in 200 components = 0.000345094 Jy ! Clean residual min=-0.003837 max=0.003938 Jy/beam ! Clean residual mean=-0.000006 rms=0.001040 Jy/beam ! Combined flux in latest and established models = 0.155723 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 38 components and 0.155723 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.874 mas, bmaj=12.96 mas, bpa=-7.174 degrees ! Estimated noise=1.20153 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00080652 Jy ! Component: 100 - total flux cleaned = -0.000899484 Jy ! Component: 150 - total flux cleaned = -0.000980989 Jy ! Component: 200 - total flux cleaned = -0.00105194 Jy ! Total flux subtracted in 200 components = -0.00105194 Jy ! Clean residual min=-0.003862 max=0.004523 Jy/beam ! Clean residual mean=-0.000008 rms=0.001517 Jy/beam ! Combined flux in latest and established models = 0.154671 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 45 components and 0.154671 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.285 mas, bmaj=7.986 mas, bpa=-3.282 degrees ! Estimated noise=0.946014 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000574685 Jy ! Component: 100 - total flux cleaned = 0.000574508 Jy ! Component: 150 - total flux cleaned = 0.000576265 Jy ! Component: 200 - total flux cleaned = 0.000599723 Jy ! Total flux subtracted in 200 components = 0.000599723 Jy ! Clean residual min=-0.003844 max=0.003922 Jy/beam ! Clean residual mean=-0.000005 rms=0.001033 Jy/beam ! Combined flux in latest and established models = 0.155271 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 46 components and 0.155271 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054987Jy sigma=0.919786 ! Fit after self-cal, rms=0.054990Jy sigma=0.919709 wmodel J0709-0255_S_2005_07_08_yyk\_map.mod ! Writing 46 model components to file: J0709-0255_S_2005_07_08_yyk_map.mod wobs J0709-0255_S_2005_07_08_yyk\_uvs.fits ! Writing UV FITS file: J0709-0255_S_2005_07_08_yyk_uvs.fits wwins J0709-0255_S_2005_07_08_yyk\_map.win ! wwins: Wrote 1 windows to J0709-0255_S_2005_07_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000456549 Jy ! Component: 100 - total flux cleaned = -0.00156058 Jy ! Component: 150 - total flux cleaned = -0.00213783 Jy ! Component: 200 - total flux cleaned = -0.00252168 Jy ! Component: 250 - total flux cleaned = -0.00288904 Jy ! Component: 300 - total flux cleaned = -0.00318934 Jy ! Component: 350 - total flux cleaned = -0.00319164 Jy ! Component: 400 - total flux cleaned = -0.00300783 Jy ! Component: 450 - total flux cleaned = -0.00282943 Jy ! Component: 500 - total flux cleaned = -0.00274421 Jy ! Component: 550 - total flux cleaned = -0.00261878 Jy ! Component: 600 - total flux cleaned = -0.00274219 Jy ! Component: 650 - total flux cleaned = -0.00266129 Jy ! Component: 700 - total flux cleaned = -0.00266008 Jy ! Component: 750 - total flux cleaned = -0.00235359 Jy ! Component: 800 - total flux cleaned = -0.00216679 Jy ! Component: 850 - total flux cleaned = -0.00201991 Jy ! Component: 900 - total flux cleaned = -0.00198433 Jy ! Component: 950 - total flux cleaned = -0.00191283 Jy ! Component: 1000 - total flux cleaned = -0.00173825 Jy ! Component: 1050 - total flux cleaned = -0.00173885 Jy ! Component: 1100 - total flux cleaned = -0.00153757 Jy ! Component: 1150 - total flux cleaned = -0.00147222 Jy ! Component: 1200 - total flux cleaned = -0.00140809 Jy ! Component: 1250 - total flux cleaned = -0.00140855 Jy ! Component: 1300 - total flux cleaned = -0.00140895 Jy ! Component: 1350 - total flux cleaned = -0.00140918 Jy ! Component: 1400 - total flux cleaned = -0.00134855 Jy ! Component: 1450 - total flux cleaned = -0.00140922 Jy ! Component: 1500 - total flux cleaned = -0.00143846 Jy ! Component: 1550 - total flux cleaned = -0.00135131 Jy ! Component: 1600 - total flux cleaned = -0.00132335 Jy ! Component: 1650 - total flux cleaned = -0.0012952 Jy ! Component: 1700 - total flux cleaned = -0.00124003 Jy ! Component: 1750 - total flux cleaned = -0.00124013 Jy ! Component: 1800 - total flux cleaned = -0.00115816 Jy ! Component: 1850 - total flux cleaned = -0.00102388 Jy ! Component: 1900 - total flux cleaned = -0.00105051 Jy ! Component: 1950 - total flux cleaned = -0.000919301 Jy ! Component: 2000 - total flux cleaned = -0.000944965 Jy ! Total flux subtracted in 2048 components = -0.000919494 Jy ! Clean residual min=-0.001624 max=0.001529 Jy/beam ! Clean residual mean=0.000000 rms=0.000527 Jy/beam ! Combined flux in latest and established models = 0.154352 Jy keep ! Adding 138 model components to the UV plane model. ! The established model now contains 184 components and 0.154352 Jy ![Exited script file: muppet] wmap "J0709-0255_S_2005_07_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.285 x 7.986 at -3.282 degrees (North through East) ! Clean map min=-0.0033218 max=0.14049 Jy/beam ! Writing clean map to FITS file: J0709-0255_S_2005_07_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.140495 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000524664 device "J0709-0255_S_2005_07_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J0709-0255_S_2005_07_08_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.12032 1.12032 2.24065 4.48129 8.96259 17.9252 35.8504 71.7007 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.14 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.285 x 7.986 at -3.282 degrees (North through East) ! Clean map min=-0.0033218 max=0.14049 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0709-0255_S_2005_07_08_yyk\_map.gif/gif" ! Attempting to open device: 'J0709-0255_S_2005_07_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0709-0255_S_2005_07_08_yyk_uvs.log closed on Fri Jan 20 10:03:34 2006