! Started logfile: J0659-2745_X_2005_07_08_yyk_uvs.log on Fri Jan 20 10:03:17 2006 obs J0659-2745_X_2005_07_08_yyk_uve.fits ! Reading UV FITS file: J0659-2745_X_2005_07_08_yyk_uve.fits ! AN table 1: 11 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.981818 visibilities/baseline/integration-bin. ! Found source: J0659-2745 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1407 lines of history. ! ! Reading 1944 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0659-2745_X_2005_07_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.283741 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6557 mas, bmaj=1.82 mas, bpa=-7.527 degrees ! Estimated noise=1.55416 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.183811 Jy ! Component: 100 - total flux cleaned = 0.251297 Jy ! Total flux subtracted in 100 components = 0.251297 Jy ! Clean residual min=-0.014550 max=0.039263 Jy/beam ! Clean residual mean=-0.000104 rms=0.004413 Jy/beam ! Combined flux in latest and established models = 0.251297 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.251297 Jy ! ! Correcting IF 1. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.118016Jy sigma=1.862281 ! Fit after self-cal, rms=0.117473Jy sigma=1.856419 ! Inverting map and beam ! Estimated beam: bmin=0.6557 mas, bmaj=1.821 mas, bpa=-7.517 degrees ! Estimated noise=1.55839 mJy/beam. ! Added new window around map position (-1, 0.2). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0476719 Jy ! Component: 100 - total flux cleaned = 0.0748307 Jy ! Total flux subtracted in 100 components = 0.0748307 Jy ! Clean residual min=-0.010792 max=0.011798 Jy/beam ! Clean residual mean=-0.000030 rms=0.002666 Jy/beam ! Combined flux in latest and established models = 0.326127 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 38 components and 0.326127 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091216Jy sigma=1.334856 ! Fit after self-cal, rms=0.090657Jy sigma=1.327063 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8372 mas, bmaj=2.283 mas, bpa=-4.794 degrees ! Estimated noise=1.02424 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0341299 Jy ! Component: 100 - total flux cleaned = 0.0491709 Jy ! Component: 150 - total flux cleaned = 0.056462 Jy ! Component: 200 - total flux cleaned = 0.0598309 Jy ! Total flux subtracted in 200 components = 0.0598309 Jy ! Clean residual min=-0.008250 max=0.009062 Jy/beam ! Clean residual mean=0.000049 rms=0.002082 Jy/beam ! Combined flux in latest and established models = 0.385958 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 34 model components to the UV plane model. ! The established model now contains 65 components and 0.385958 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083605Jy sigma=1.161839 ! Fit after self-cal, rms=0.083321Jy sigma=1.158274 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8372 x 2.283 at -4.794 degrees (North through East) ! Clean map min=-0.0070153 max=0.22058 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00743 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.96 HN 1.11 KP 0.95 ! LA 1.01 MK 1.01 NL 0.97 OV 1.03 ! PT 0.96 SC 0.97 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00197 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.98 HN 1.17 KP 0.89 ! LA 0.97 MK 1.03 NL 1.00 OV 1.02 ! PT 0.99 SC 0.96 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.990175 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.02 HN 0.99 KP 0.85 ! LA 0.99 MK 1.15 NL 1.01 OV 1.05 ! PT 1.09 SC 0.94 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.96212 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.02 HN 1.16 KP 1.00 ! LA 0.99 MK 0.83 NL 1.07 OV 1.09 ! PT 1.15 SC 1.05 ! ! ! Fit before self-cal, rms=0.083321Jy sigma=1.158274 ! Fit after self-cal, rms=0.079829Jy sigma=1.092135 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079829Jy sigma=1.092135 ! Fit after self-cal, rms=0.079824Jy sigma=1.092080 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.82 mas, bmaj=2.249 mas, bpa=-4.817 degrees ! Estimated noise=1.00441 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00478922 Jy ! Component: 100 - total flux cleaned = -0.00571792 Jy ! Component: 150 - total flux cleaned = -0.00579033 Jy ! Component: 200 - total flux cleaned = -0.00584908 Jy ! Total flux subtracted in 200 components = -0.00584908 Jy ! Clean residual min=-0.005551 max=0.008138 Jy/beam ! Clean residual mean=-0.000026 rms=0.001668 Jy/beam ! Combined flux in latest and established models = 0.380109 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 72 components and 0.380109 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079520Jy sigma=1.087583 ! Fit after self-cal, rms=0.079511Jy sigma=1.087457 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079511Jy sigma=1.087457 ! Fit after self-cal, rms=0.074483Jy sigma=1.028624 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, -2.6). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00819927 Jy ! Component: 100 - total flux cleaned = 0.0104545 Jy ! Component: 150 - total flux cleaned = 0.0107924 Jy ! Component: 200 - total flux cleaned = 0.0110846 Jy ! Total flux subtracted in 200 components = 0.0110846 Jy ! Clean residual min=-0.004921 max=0.005098 Jy/beam ! Clean residual mean=-0.000007 rms=0.001324 Jy/beam ! Combined flux in latest and established models = 0.391194 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 99 components and 0.391194 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073916Jy sigma=1.014694 ! Fit after self-cal, rms=0.073392Jy sigma=1.006037 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.82 x 2.249 at -4.817 degrees (North through East) ! Clean map min=-0.0045365 max=0.21793 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073392Jy sigma=1.006037 ! Fit after self-cal, rms=0.072143Jy sigma=0.974568 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072143Jy sigma=0.974568 ! Fit after self-cal, rms=0.072218Jy sigma=0.973314 ! Inverting map and beam ! Estimated beam: bmin=0.8195 mas, bmaj=2.245 mas, bpa=-5.014 degrees ! Estimated noise=1.00096 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00336851 Jy ! Component: 100 - total flux cleaned = 0.00384845 Jy ! Component: 150 - total flux cleaned = 0.00405908 Jy ! Component: 200 - total flux cleaned = 0.00418597 Jy ! Total flux subtracted in 200 components = 0.00418597 Jy ! Clean residual min=-0.004713 max=0.004343 Jy/beam ! Clean residual mean=-0.000008 rms=0.001165 Jy/beam ! Combined flux in latest and established models = 0.39538 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 112 components and 0.39538 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072037Jy sigma=0.968995 ! Fit after self-cal, rms=0.072074Jy sigma=0.967942 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072074Jy sigma=0.967942 ! Fit after self-cal, rms=0.070858Jy sigma=0.931377 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070858Jy sigma=0.931377 ! Fit after self-cal, rms=0.070901Jy sigma=0.931258 ! Inverting map and beam ! Estimated beam: bmin=0.8236 mas, bmaj=2.286 mas, bpa=-4.947 degrees ! Estimated noise=1.00814 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00182525 Jy ! Component: 100 - total flux cleaned = 0.00227856 Jy ! Component: 150 - total flux cleaned = 0.00249229 Jy ! Component: 200 - total flux cleaned = 0.00268243 Jy ! Total flux subtracted in 200 components = 0.00268243 Jy ! Clean residual min=-0.004655 max=0.003969 Jy/beam ! Clean residual mean=-0.000007 rms=0.001108 Jy/beam ! Combined flux in latest and established models = 0.398062 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 121 components and 0.398062 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070751Jy sigma=0.928205 ! Fit after self-cal, rms=0.070762Jy sigma=0.927852 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.391 mas, bmaj=6.042 mas, bpa=-2.842 degrees ! Estimated noise=1.30596 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00177327 Jy ! Component: 100 - total flux cleaned = 0.00229442 Jy ! Component: 150 - total flux cleaned = 0.00255457 Jy ! Component: 200 - total flux cleaned = 0.00267825 Jy ! Total flux subtracted in 200 components = 0.00267825 Jy ! Clean residual min=-0.004103 max=0.004632 Jy/beam ! Clean residual mean=-0.000005 rms=0.001429 Jy/beam ! Combined flux in latest and established models = 0.400741 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 127 components and 0.400741 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070755Jy sigma=0.927906 ! Fit after self-cal, rms=0.070744Jy sigma=0.927438 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.658 mas, bmaj=1.819 mas, bpa=-7.364 degrees ! Estimated noise=1.57418 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.189857 Jy ! Component: 100 - total flux cleaned = 0.260725 Jy ! Component: 150 - total flux cleaned = 0.300463 Jy ! Component: 200 - total flux cleaned = 0.325308 Jy ! Total flux subtracted in 200 components = 0.325308 Jy ! Clean residual min=-0.008153 max=0.009910 Jy/beam ! Clean residual mean=-0.000044 rms=0.002205 Jy/beam ! Combined flux in latest and established models = 0.325308 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.325308 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8236 mas, bmaj=2.286 mas, bpa=-4.947 degrees ! Estimated noise=1.00814 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0313972 Jy ! Component: 100 - total flux cleaned = 0.0477291 Jy ! Component: 150 - total flux cleaned = 0.057096 Jy ! Component: 200 - total flux cleaned = 0.0629535 Jy ! Total flux subtracted in 200 components = 0.0629535 Jy ! Clean residual min=-0.005064 max=0.004286 Jy/beam ! Clean residual mean=-0.000038 rms=0.001256 Jy/beam ! Combined flux in latest and established models = 0.388262 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 65 components and 0.388261 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.391 mas, bmaj=6.042 mas, bpa=-2.842 degrees ! Estimated noise=1.30596 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00546451 Jy ! Component: 100 - total flux cleaned = 0.00836351 Jy ! Component: 150 - total flux cleaned = 0.00993716 Jy ! Component: 200 - total flux cleaned = 0.0102679 Jy ! Total flux subtracted in 200 components = 0.0102679 Jy ! Clean residual min=-0.004185 max=0.004437 Jy/beam ! Clean residual mean=-0.000017 rms=0.001438 Jy/beam ! Combined flux in latest and established models = 0.398529 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 85 components and 0.398529 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8236 mas, bmaj=2.286 mas, bpa=-4.947 degrees ! Estimated noise=1.00814 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000864536 Jy ! Component: 100 - total flux cleaned = -0.00060761 Jy ! Component: 150 - total flux cleaned = -0.00038922 Jy ! Component: 200 - total flux cleaned = -0.000325673 Jy ! Total flux subtracted in 200 components = -0.000325673 Jy ! Clean residual min=-0.004474 max=0.003916 Jy/beam ! Clean residual mean=-0.000008 rms=0.001093 Jy/beam ! Combined flux in latest and established models = 0.398204 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 95 components and 0.398204 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070761Jy sigma=0.927336 ! Fit after self-cal, rms=0.070722Jy sigma=0.926630 wmodel J0659-2745_X_2005_07_08_yyk\_map.mod ! Writing 95 model components to file: J0659-2745_X_2005_07_08_yyk_map.mod wobs J0659-2745_X_2005_07_08_yyk\_uvs.fits ! Writing UV FITS file: J0659-2745_X_2005_07_08_yyk_uvs.fits wwins J0659-2745_X_2005_07_08_yyk\_map.win ! wwins: Wrote 3 windows to J0659-2745_X_2005_07_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0020059 Jy ! Component: 100 - total flux cleaned = -0.00287193 Jy ! Component: 150 - total flux cleaned = -0.00320965 Jy ! Component: 200 - total flux cleaned = -0.00346172 Jy ! Component: 250 - total flux cleaned = -0.00346224 Jy ! Component: 300 - total flux cleaned = -0.0036885 Jy ! Component: 350 - total flux cleaned = -0.00406893 Jy ! Component: 400 - total flux cleaned = -0.00433031 Jy ! Component: 450 - total flux cleaned = -0.00438133 Jy ! Component: 500 - total flux cleaned = -0.00437881 Jy ! Component: 550 - total flux cleaned = -0.00432892 Jy ! Component: 600 - total flux cleaned = -0.00432853 Jy ! Component: 650 - total flux cleaned = -0.00428302 Jy ! Component: 700 - total flux cleaned = -0.00423839 Jy ! Component: 750 - total flux cleaned = -0.00410657 Jy ! Component: 800 - total flux cleaned = -0.00410708 Jy ! Component: 850 - total flux cleaned = -0.00406487 Jy ! Component: 900 - total flux cleaned = -0.00418833 Jy ! Component: 950 - total flux cleaned = -0.00410632 Jy ! Component: 1000 - total flux cleaned = -0.0042667 Jy ! Component: 1050 - total flux cleaned = -0.00434472 Jy ! Component: 1100 - total flux cleaned = -0.00442132 Jy ! Component: 1150 - total flux cleaned = -0.00442147 Jy ! Component: 1200 - total flux cleaned = -0.0043845 Jy ! Component: 1250 - total flux cleaned = -0.00449432 Jy ! Component: 1300 - total flux cleaned = -0.00449389 Jy ! Component: 1350 - total flux cleaned = -0.00452958 Jy ! Component: 1400 - total flux cleaned = -0.00466869 Jy ! Component: 1450 - total flux cleaned = -0.00473695 Jy ! Component: 1500 - total flux cleaned = -0.00480404 Jy ! Component: 1550 - total flux cleaned = -0.00483776 Jy ! Component: 1600 - total flux cleaned = -0.00493738 Jy ! Component: 1650 - total flux cleaned = -0.00516625 Jy ! Component: 1700 - total flux cleaned = -0.00526321 Jy ! Component: 1750 - total flux cleaned = -0.00545503 Jy ! Component: 1800 - total flux cleaned = -0.00561318 Jy ! Component: 1850 - total flux cleaned = -0.00576976 Jy ! Component: 1900 - total flux cleaned = -0.00601751 Jy ! Component: 1950 - total flux cleaned = -0.00607852 Jy ! Component: 2000 - total flux cleaned = -0.00623032 Jy ! Total flux subtracted in 2048 components = -0.00641031 Jy ! Clean residual min=-0.001576 max=0.001780 Jy/beam ! Clean residual mean=0.000002 rms=0.000572 Jy/beam ! Combined flux in latest and established models = 0.391793 Jy keep ! Adding 144 model components to the UV plane model. ! The established model now contains 239 components and 0.391793 Jy ![Exited script file: muppet] wmap "J0659-2745_X_2005_07_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8236 x 2.286 at -4.947 degrees (North through East) ! Clean map min=-0.0035618 max=0.22444 Jy/beam ! Writing clean map to FITS file: J0659-2745_X_2005_07_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.224442 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000568391 device "J0659-2745_X_2005_07_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J0659-2745_X_2005_07_08_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.759739 0.759739 1.51948 3.03895 6.07791 12.1558 24.3116 48.6233 97.2466 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.224 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8236 x 2.286 at -4.947 degrees (North through East) ! Clean map min=-0.0035618 max=0.22444 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0659-2745_X_2005_07_08_yyk\_map.gif/gif" ! Attempting to open device: 'J0659-2745_X_2005_07_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0659-2745_X_2005_07_08_yyk_uvs.log closed on Fri Jan 20 10:03:22 2006