! Started logfile: J0611-1155_S_2005_07_09_yyk_uvs.log on Fri Jan 20 10:00:38 2006
obs J0611-1155_S_2005_07_09_yyk_uve.fits
! Reading UV FITS file: J0611-1155_S_2005_07_09_yyk_uve.fits
! AN table 1: 10 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.933333 visibilities/baseline/integration-bin.
! Found source: J0611-1155
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23697e+09        8e+06          1        8e+06
!  02        2  2.26697e+09        8e+06          1        8e+06
!  03        3  2.35697e+09        8e+06          1        8e+06
!  04        4  2.37697e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1602 lines of history.
! 
! Reading 1680 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J0611-1155_S_2005_07_09_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.196037 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.529 mas, bmaj=6.532 mas, bpa=-2.072 degrees
! Estimated noise=1.48251 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.140062 Jy
! Component: 100  -  total flux cleaned = 0.184088 Jy
! Total flux subtracted in 100 components = 0.184088 Jy
! Clean residual min=-0.007860 max=0.015393 Jy/beam
! Clean residual mean=0.000144 rms=0.002817 Jy/beam
! Combined flux in latest and established models = 0.184088 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.184088 Jy
! 
! Correcting IF 1.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.086051Jy  sigma=1.306115
! Fit after  self-cal, rms=0.085436Jy  sigma=1.295203
! Inverting map and beam 
! Estimated beam: bmin=2.529 mas, bmaj=6.532 mas, bpa=-2.072 degrees
! Estimated noise=1.48251 mJy/beam.
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.091 mas, bmaj=8.024 mas, bpa=-5.01 degrees
! Estimated noise=1.08929 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2.5, -0.5).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0288528 Jy
! Component: 100  -  total flux cleaned = 0.0405257 Jy
! Component: 150  -  total flux cleaned = 0.0455457 Jy
! Component: 200  -  total flux cleaned = 0.0457014 Jy
! Total flux subtracted in 200 components = 0.0457014 Jy
! Clean residual min=-0.006856 max=0.011114 Jy/beam
! Clean residual mean=0.000124 rms=0.002014 Jy/beam
! Combined flux in latest and established models = 0.229789 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 40 model components to the UV plane model.
! The established model now contains 59 components and 0.22979 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079342Jy  sigma=1.172022
! Fit after  self-cal, rms=0.079266Jy  sigma=1.171083
! Inverting map 
! Added new window around map position (-13, -9).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0122328 Jy
! Component: 100  -  total flux cleaned = 0.0166293 Jy
! Component: 150  -  total flux cleaned = 0.0173271 Jy
! Component: 200  -  total flux cleaned = 0.0173291 Jy
! Total flux subtracted in 200 components = 0.0173291 Jy
! Clean residual min=-0.005675 max=0.004763 Jy/beam
! Clean residual mean=0.000061 rms=0.001461 Jy/beam
! Combined flux in latest and established models = 0.247119 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 50 model components to the UV plane model.
! The established model now contains 103 components and 0.247119 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078059Jy  sigma=1.145142
! Fit after  self-cal, rms=0.077776Jy  sigma=1.142129
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.091 x 8.024 at -5.01 degrees (North through East)
! Clean map  min=-0.0058716  max=0.16605 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1.01416
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.12     KP        0.95     
!   LA        1.05     MK        0.92     NL        0.94     OV        1.04     
!   PT        1.02     SC        0.85     
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 0.968316
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.00     HN        1.11     KP        0.95     
!   LA        1.04     MK        0.99     NL        1.01     OV        1.03     
!   PT        1.07     SC        1.07     
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 1.00066
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.90     FD        0.95     HN        0.97     KP        1.01     
!   LA        0.90     MK        1.03     NL        1.06     OV        1.03     
!   PT        1.14     SC        1.00     
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.077776Jy  sigma=1.142129
! Fit after  self-cal, rms=0.076785Jy  sigma=1.125998
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076785Jy  sigma=1.125998
! Fit after  self-cal, rms=0.076783Jy  sigma=1.125953
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.062 mas, bmaj=7.915 mas, bpa=-4.784 degrees
! Estimated noise=1.0891 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0048073 Jy
! Component: 100  -  total flux cleaned = 0.00646983 Jy
! Component: 150  -  total flux cleaned = 0.00708318 Jy
! Component: 200  -  total flux cleaned = 0.00730023 Jy
! Total flux subtracted in 200 components = 0.00730023 Jy
! Clean residual min=-0.005052 max=0.004296 Jy/beam
! Clean residual mean=0.000111 rms=0.001278 Jy/beam
! Combined flux in latest and established models = 0.254419 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 32 model components to the UV plane model.
! The established model now contains 127 components and 0.254419 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076591Jy  sigma=1.120971
! Fit after  self-cal, rms=0.076502Jy  sigma=1.120343
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076502Jy  sigma=1.120343
! Fit after  self-cal, rms=0.071547Jy  sigma=1.046332
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00247846 Jy
! Component: 100  -  total flux cleaned = 0.00313895 Jy
! Component: 150  -  total flux cleaned = 0.00372466 Jy
! Component: 200  -  total flux cleaned = 0.00402446 Jy
! Total flux subtracted in 200 components = 0.00402446 Jy
! Clean residual min=-0.005242 max=0.003885 Jy/beam
! Clean residual mean=0.000097 rms=0.001178 Jy/beam
! Combined flux in latest and established models = 0.258443 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 39 model components to the UV plane model.
! The established model now contains 157 components and 0.258443 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071434Jy  sigma=1.044258
! Fit after  self-cal, rms=0.071178Jy  sigma=1.035230
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.062 x 7.915 at -4.784 degrees (North through East)
! Clean map  min=-0.0049854  max=0.16721 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071178Jy  sigma=1.035230
! Fit after  self-cal, rms=0.071575Jy  sigma=1.020137
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071575Jy  sigma=1.020137
! Fit after  self-cal, rms=0.071639Jy  sigma=1.018829
! Inverting map and beam 
! Estimated beam: bmin=3.02 mas, bmaj=7.811 mas, bpa=-4.221 degrees
! Estimated noise=1.0983 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00390402 Jy
! Component: 100  -  total flux cleaned = 0.00598348 Jy
! Component: 150  -  total flux cleaned = 0.00647574 Jy
! Component: 200  -  total flux cleaned = 0.0068327 Jy
! Total flux subtracted in 200 components = 0.0068327 Jy
! Clean residual min=-0.004871 max=0.003455 Jy/beam
! Clean residual mean=0.000084 rms=0.001138 Jy/beam
! Combined flux in latest and established models = 0.265276 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 50 model components to the UV plane model.
! The established model now contains 184 components and 0.265276 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071446Jy  sigma=1.015496
! Fit after  self-cal, rms=0.071494Jy  sigma=1.015063
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071494Jy  sigma=1.015063
! Fit after  self-cal, rms=0.071263Jy  sigma=1.005705
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071263Jy  sigma=1.005705
! Fit after  self-cal, rms=0.071323Jy  sigma=1.005552
! Inverting map and beam 
! Estimated beam: bmin=3.005 mas, bmaj=7.776 mas, bpa=-4.115 degrees
! Estimated noise=1.10705 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00274162 Jy
! Component: 100  -  total flux cleaned = 0.00374894 Jy
! Component: 150  -  total flux cleaned = 0.00404887 Jy
! Component: 200  -  total flux cleaned = 0.00418035 Jy
! Total flux subtracted in 200 components = 0.00418035 Jy
! Clean residual min=-0.004859 max=0.003519 Jy/beam
! Clean residual mean=0.000079 rms=0.001131 Jy/beam
! Combined flux in latest and established models = 0.269457 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 47 model components to the UV plane model.
! The established model now contains 200 components and 0.269457 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071223Jy  sigma=1.003767
! Fit after  self-cal, rms=0.071258Jy  sigma=1.003680
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.921 mas, bmaj=14.81 mas, bpa=1.312 degrees
! Estimated noise=1.45679 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00165772 Jy
! Component: 100  -  total flux cleaned = 0.00183637 Jy
! Component: 150  -  total flux cleaned = 0.00186866 Jy
! Component: 200  -  total flux cleaned = 0.00186733 Jy
! Total flux subtracted in 200 components = 0.00186733 Jy
! Clean residual min=-0.005778 max=0.004943 Jy/beam
! Clean residual mean=0.000146 rms=0.001775 Jy/beam
! Combined flux in latest and established models = 0.271324 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 19 model components to the UV plane model.
! The established model now contains 209 components and 0.271324 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071260Jy  sigma=1.003616
! Fit after  self-cal, rms=0.071287Jy  sigma=1.003516
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.496 mas, bmaj=6.478 mas, bpa=-1.804 degrees
! Estimated noise=1.49284 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.14382 Jy
! Component: 100  -  total flux cleaned = 0.19047 Jy
! Component: 150  -  total flux cleaned = 0.215533 Jy
! Component: 200  -  total flux cleaned = 0.230833 Jy
! Total flux subtracted in 200 components = 0.230833 Jy
! Clean residual min=-0.006899 max=0.006962 Jy/beam
! Clean residual mean=0.000111 rms=0.001692 Jy/beam
! Combined flux in latest and established models = 0.230833 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 54 model components to the UV plane model.
! The established model now contains 54 components and 0.230833 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.005 mas, bmaj=7.776 mas, bpa=-4.115 degrees
! Estimated noise=1.10705 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0151843 Jy
! Component: 100  -  total flux cleaned = 0.0245354 Jy
! Component: 150  -  total flux cleaned = 0.0307511 Jy
! Component: 200  -  total flux cleaned = 0.0348621 Jy
! Total flux subtracted in 200 components = 0.0348621 Jy
! Clean residual min=-0.005588 max=0.003591 Jy/beam
! Clean residual mean=0.000088 rms=0.001235 Jy/beam
! Combined flux in latest and established models = 0.265695 Jy
! Adding 69 model components to the UV plane model.
! The established model now contains 117 components and 0.265695 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.921 mas, bmaj=14.81 mas, bpa=1.312 degrees
! Estimated noise=1.45679 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00355894 Jy
! Component: 100  -  total flux cleaned = 0.00453852 Jy
! Component: 150  -  total flux cleaned = 0.00477079 Jy
! Component: 200  -  total flux cleaned = 0.00483454 Jy
! Total flux subtracted in 200 components = 0.00483454 Jy
! Clean residual min=-0.006120 max=0.004642 Jy/beam
! Clean residual mean=0.000149 rms=0.001804 Jy/beam
! Combined flux in latest and established models = 0.27053 Jy
! Adding 52 model components to the UV plane model.
! The established model now contains 154 components and 0.27053 Jy
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.005 mas, bmaj=7.776 mas, bpa=-4.115 degrees
! Estimated noise=1.10705 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -2.51892e-05 Jy
! Component: 100  -  total flux cleaned = -0.000190239 Jy
! Component: 150  -  total flux cleaned = -0.000331347 Jy
! Component: 200  -  total flux cleaned = -0.000201898 Jy
! Total flux subtracted in 200 components = -0.000201898 Jy
! Clean residual min=-0.005043 max=0.003489 Jy/beam
! Clean residual mean=0.000076 rms=0.001149 Jy/beam
! Combined flux in latest and established models = 0.270328 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 22 model components to the UV plane model.
! The established model now contains 175 components and 0.270328 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071376Jy  sigma=1.005514
! Fit after  self-cal, rms=0.071409Jy  sigma=1.005282
wmodel J0611-1155_S_2005_07_09_yyk\_map.mod
! Writing 175 model components to file: J0611-1155_S_2005_07_09_yyk_map.mod
wobs J0611-1155_S_2005_07_09_yyk\_uvs.fits
! Writing UV FITS file: J0611-1155_S_2005_07_09_yyk_uvs.fits
wwins J0611-1155_S_2005_07_09_yyk\_map.win
! wwins: Wrote 3 windows to J0611-1155_S_2005_07_09_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00203793 Jy
! Component: 100  -  total flux cleaned = -0.00311869 Jy
! Component: 150  -  total flux cleaned = -0.00336745 Jy
! Component: 200  -  total flux cleaned = -0.00307609 Jy
! Component: 250  -  total flux cleaned = -0.0027399 Jy
! Component: 300  -  total flux cleaned = -0.00263113 Jy
! Component: 350  -  total flux cleaned = -0.00252792 Jy
! Component: 400  -  total flux cleaned = -0.0024771 Jy
! Component: 450  -  total flux cleaned = -0.0022843 Jy
! Component: 500  -  total flux cleaned = -0.00228514 Jy
! Component: 550  -  total flux cleaned = -0.00210308 Jy
! Component: 600  -  total flux cleaned = -0.00188265 Jy
! Component: 650  -  total flux cleaned = -0.00170972 Jy
! Component: 700  -  total flux cleaned = -0.00158342 Jy
! Component: 750  -  total flux cleaned = -0.00145934 Jy
! Component: 800  -  total flux cleaned = -0.00133807 Jy
! Component: 850  -  total flux cleaned = -0.00121863 Jy
! Component: 900  -  total flux cleaned = -0.00110238 Jy
! Component: 950  -  total flux cleaned = -0.000949624 Jy
! Component: 1000  -  total flux cleaned = -0.000726591 Jy
! Component: 1050  -  total flux cleaned = -0.0005442 Jy
! Component: 1100  -  total flux cleaned = -0.000329882 Jy
! Component: 1150  -  total flux cleaned = -0.0002254 Jy
! Component: 1200  -  total flux cleaned = -0.000190829 Jy
! Component: 1250  -  total flux cleaned = -5.50491e-05 Jy
! Component: 1300  -  total flux cleaned = 4.44359e-05 Jy
! Component: 1350  -  total flux cleaned = 1.15387e-05 Jy
! Component: 1400  -  total flux cleaned = -5.25753e-05 Jy
! Component: 1450  -  total flux cleaned = -5.18559e-05 Jy
! Component: 1500  -  total flux cleaned = -0.000113889 Jy
! Component: 1550  -  total flux cleaned = -2.22719e-05 Jy
! Component: 1600  -  total flux cleaned = -8.30035e-05 Jy
! Component: 1650  -  total flux cleaned = -0.000113094 Jy
! Component: 1700  -  total flux cleaned = -0.000200616 Jy
! Component: 1750  -  total flux cleaned = -0.000142343 Jy
! Component: 1800  -  total flux cleaned = -1.22998e-07 Jy
! Component: 1850  -  total flux cleaned = 5.57428e-05 Jy
! Component: 1900  -  total flux cleaned = 8.39738e-05 Jy
! Component: 1950  -  total flux cleaned = 0.000166465 Jy
! Component: 2000  -  total flux cleaned = 0.000301605 Jy
! Total flux subtracted in 2048 components = 0.000381218 Jy
! Clean residual min=-0.001749 max=0.001563 Jy/beam
! Clean residual mean=0.000024 rms=0.000547 Jy/beam
! Combined flux in latest and established models = 0.270709 Jy
keep
! Adding 131 model components to the UV plane model.
! The established model now contains 306 components and 0.270709 Jy
![Exited script file: muppet]
wmap "J0611-1155_S_2005_07_09_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.005 x 7.776 at -4.115 degrees (North through East)
! Clean map  min=-0.0038616  max=0.17019 Jy/beam
! Writing clean map to FITS file: J0611-1155_S_2005_07_09_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.170194 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000550658 
device "J0611-1155_S_2005_07_09_yyk\_map.eps/VPS"
! Attempting to open device: 'J0611-1155_S_2005_07_09_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.97064 0.97064 1.94128 3.88256 7.76512 15.5302 31.0605 62.121
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0016 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.17 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.005 x 7.776 at -4.115 degrees (North through East)
! Clean map  min=-0.0038616  max=0.17019 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J0611-1155_S_2005_07_09_yyk\_map.gif/gif"
! Attempting to open device: 'J0611-1155_S_2005_07_09_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J0611-1155_S_2005_07_09_yyk_uvs.log closed on Fri Jan 20 10:00:42 2006