! Started logfile: J0609-1542_S_2005_07_20_yyk_uvs.log on Fri Jan 20 10:00:20 2006 obs J0609-1542_S_2005_07_20_yyk_uve.fits ! Reading UV FITS file: J0609-1542_S_2005_07_20_yyk_uve.fits ! AN table 1: 4 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.905556 visibilities/baseline/integration-bin. ! Found source: J0609-1542 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1526 lines of history. ! ! Reading 652 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0609-1542_S_2005_07_20_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 3.45003 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.561 mas, bmaj=6.846 mas, bpa=-4.138 degrees ! Estimated noise=2.28094 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.84395 Jy ! Component: 100 - total flux cleaned = 3.31868 Jy ! Total flux subtracted in 100 components = 3.31868 Jy ! Clean residual min=-0.126231 max=0.144581 Jy/beam ! Clean residual mean=-0.000364 rms=0.038510 Jy/beam ! Combined flux in latest and established models = 3.31868 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 3.31868 Jy ! ! Correcting IF 1. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.588836Jy sigma=9.725686 ! Fit after self-cal, rms=0.588702Jy sigma=9.721597 ! Inverting map and beam ! Estimated beam: bmin=2.561 mas, bmaj=6.846 mas, bpa=-4.138 degrees ! Estimated noise=2.28094 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.198 mas, bmaj=8.411 mas, bpa=-5.351 degrees ! Estimated noise=1.76106 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.170419 Jy ! Component: 100 - total flux cleaned = 0.22692 Jy ! Component: 150 - total flux cleaned = 0.243398 Jy ! Component: 200 - total flux cleaned = 0.255461 Jy ! Total flux subtracted in 200 components = 0.255461 Jy ! Clean residual min=-0.131696 max=0.148761 Jy/beam ! Clean residual mean=0.000347 rms=0.039831 Jy/beam ! Combined flux in latest and established models = 3.57414 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 35 components and 3.57414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.536430Jy sigma=9.126120 ! Fit after self-cal, rms=0.536204Jy sigma=9.124850 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.198 x 8.411 at -5.351 degrees (North through East) ! Clean map min=-0.12672 max=3.177 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.02481 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.02 HN 1.03 KP 0.94 ! LA 1.08 MK 0.91 NL 0.94 OV 1.00 ! PT 0.97 SC 0.90 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00341 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.98 HN 1.07 KP 0.99 ! LA 1.04 MK 1.00 NL 0.98 OV 1.05 ! PT 0.96 SC 0.95 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.9506 ! Telescope amplitude corrections in sub-array 1: ! BR 1.41 FD 0.91 HN 1.03 KP 0.98 ! LA 0.94 MK 1.13 NL 1.04 OV 1.06 ! PT 1.04 SC 0.98 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.06291 ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.94 HN 0.92 KP 0.88 ! LA 0.79 MK 1.10 NL 0.95 OV 0.90 ! PT 0.96 SC 1.05 ! ! ! Fit before self-cal, rms=0.536204Jy sigma=9.124850 ! Fit after self-cal, rms=0.387021Jy sigma=6.100468 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.387021Jy sigma=6.100468 ! Fit after self-cal, rms=0.387025Jy sigma=6.099766 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.258 mas, bmaj=8.594 mas, bpa=-4.403 degrees ! Estimated noise=1.77078 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (13.5, 10.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.154516 Jy ! Component: 100 - total flux cleaned = 0.213659 Jy ! Component: 150 - total flux cleaned = 0.227486 Jy ! Component: 200 - total flux cleaned = 0.236043 Jy ! Total flux subtracted in 200 components = 0.236043 Jy ! Clean residual min=-0.044643 max=0.054084 Jy/beam ! Clean residual mean=-0.000161 rms=0.014172 Jy/beam ! Combined flux in latest and established models = 3.81019 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 67 components and 3.81019 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.339959Jy sigma=5.361902 ! Fit after self-cal, rms=0.335409Jy sigma=5.308262 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.335409Jy sigma=5.308262 ! Fit after self-cal, rms=0.333185Jy sigma=5.283532 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.025747 Jy ! Component: 100 - total flux cleaned = 0.0285413 Jy ! Component: 150 - total flux cleaned = 0.0301946 Jy ! Component: 200 - total flux cleaned = 0.032448 Jy ! Total flux subtracted in 200 components = 0.032448 Jy ! Clean residual min=-0.039520 max=0.045211 Jy/beam ! Clean residual mean=-0.000251 rms=0.012775 Jy/beam ! Combined flux in latest and established models = 3.84264 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 87 components and 3.84264 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.327852Jy sigma=5.217902 ! Fit after self-cal, rms=0.327126Jy sigma=5.211651 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.258 x 8.594 at -4.403 degrees (North through East) ! Clean map min=-0.037939 max=3.2244 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.327126Jy sigma=5.211651 ! Fit after self-cal, rms=0.147525Jy sigma=2.266971 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147525Jy sigma=2.266971 ! Fit after self-cal, rms=0.147492Jy sigma=2.266743 ! Inverting map and beam ! Estimated beam: bmin=3.242 mas, bmaj=8.574 mas, bpa=-4.136 degrees ! Estimated noise=1.75724 mJy/beam. ! Added new window around map position (-12, 56). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0562332 Jy ! Component: 100 - total flux cleaned = 0.0703749 Jy ! Component: 150 - total flux cleaned = 0.0733234 Jy ! Component: 200 - total flux cleaned = 0.0759132 Jy ! Total flux subtracted in 200 components = 0.0759132 Jy ! Clean residual min=-0.025144 max=0.025642 Jy/beam ! Clean residual mean=-0.000034 rms=0.006991 Jy/beam ! Combined flux in latest and established models = 3.91855 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 48 model components to the UV plane model. ! The established model now contains 129 components and 3.91855 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129681Jy sigma=1.967882 ! Fit after self-cal, rms=0.128599Jy sigma=1.952591 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128599Jy sigma=1.952591 ! Fit after self-cal, rms=0.109875Jy sigma=1.650944 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109875Jy sigma=1.650944 ! Fit after self-cal, rms=0.109874Jy sigma=1.650873 ! Inverting map and beam ! Estimated beam: bmin=3.244 mas, bmaj=8.584 mas, bpa=-4.112 degrees ! Estimated noise=1.75615 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0106134 Jy ! Component: 100 - total flux cleaned = 0.0118277 Jy ! Component: 150 - total flux cleaned = 0.0139726 Jy ! Component: 200 - total flux cleaned = 0.0154499 Jy ! Total flux subtracted in 200 components = 0.0154499 Jy ! Clean residual min=-0.022977 max=0.023742 Jy/beam ! Clean residual mean=-0.000055 rms=0.006057 Jy/beam ! Combined flux in latest and established models = 3.934 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 37 model components to the UV plane model. ! The established model now contains 149 components and 3.934 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104864Jy sigma=1.564484 ! Fit after self-cal, rms=0.104397Jy sigma=1.557516 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.922 mas, bmaj=16.2 mas, bpa=1.1 degrees ! Estimated noise=2.19443 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0121351 Jy ! Component: 100 - total flux cleaned = 0.0169449 Jy ! Component: 150 - total flux cleaned = 0.0186546 Jy ! Component: 200 - total flux cleaned = 0.0195883 Jy ! Total flux subtracted in 200 components = 0.0195883 Jy ! Clean residual min=-0.022298 max=0.020381 Jy/beam ! Clean residual mean=-0.000152 rms=0.006937 Jy/beam ! Combined flux in latest and established models = 3.95359 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 174 components and 3.95359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103361Jy sigma=1.541966 ! Fit after self-cal, rms=0.102548Jy sigma=1.532229 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.574 mas, bmaj=6.913 mas, bpa=-3.741 degrees ! Estimated noise=2.2313 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.78175 Jy ! Component: 100 - total flux cleaned = 3.24543 Jy ! Component: 150 - total flux cleaned = 3.45139 Jy ! Component: 200 - total flux cleaned = 3.57269 Jy ! Total flux subtracted in 200 components = 3.57269 Jy ! Clean residual min=-0.040074 max=0.060897 Jy/beam ! Clean residual mean=0.000189 rms=0.014194 Jy/beam ! Combined flux in latest and established models = 3.57269 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 45 model components to the UV plane model. ! The established model now contains 45 components and 3.57269 Jy ! Inverting map and beam ! Estimated beam: bmin=3.244 mas, bmaj=8.584 mas, bpa=-4.112 degrees ! Estimated noise=1.75615 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.101978 Jy ! Component: 100 - total flux cleaned = 0.167769 Jy ! Component: 150 - total flux cleaned = 0.214723 Jy ! Component: 200 - total flux cleaned = 0.249889 Jy ! Total flux subtracted in 200 components = 0.249889 Jy ! Clean residual min=-0.022752 max=0.032287 Jy/beam ! Clean residual mean=0.000064 rms=0.008143 Jy/beam ! Combined flux in latest and established models = 3.82258 Jy ! Adding 72 model components to the UV plane model. ! The established model now contains 108 components and 3.82258 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.922 mas, bmaj=16.2 mas, bpa=1.1 degrees ! Estimated noise=2.19443 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0450904 Jy ! Component: 100 - total flux cleaned = 0.0714106 Jy ! Component: 150 - total flux cleaned = 0.0818058 Jy ! Component: 200 - total flux cleaned = 0.0880269 Jy ! Total flux subtracted in 200 components = 0.0880269 Jy ! Clean residual min=-0.023396 max=0.027841 Jy/beam ! Clean residual mean=-0.000123 rms=0.008451 Jy/beam ! Combined flux in latest and established models = 3.91061 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 127 components and 3.91061 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.244 mas, bmaj=8.584 mas, bpa=-4.112 degrees ! Estimated noise=1.75615 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000495301 Jy ! Component: 100 - total flux cleaned = 0.00396046 Jy ! Component: 150 - total flux cleaned = 0.00753065 Jy ! Component: 200 - total flux cleaned = 0.0107249 Jy ! Total flux subtracted in 200 components = 0.0107249 Jy ! Clean residual min=-0.020474 max=0.024047 Jy/beam ! Clean residual mean=-0.000071 rms=0.005975 Jy/beam ! Combined flux in latest and established models = 3.92133 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 43 model components to the UV plane model. ! The established model now contains 162 components and 3.92133 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099550Jy sigma=1.504233 ! Fit after self-cal, rms=0.099185Jy sigma=1.497991 wmodel J0609-1542_S_2005_07_20_yyk\_map.mod ! Writing 162 model components to file: J0609-1542_S_2005_07_20_yyk_map.mod wobs J0609-1542_S_2005_07_20_yyk\_uvs.fits ! Writing UV FITS file: J0609-1542_S_2005_07_20_yyk_uvs.fits wwins J0609-1542_S_2005_07_20_yyk\_map.win ! wwins: Wrote 3 windows to J0609-1542_S_2005_07_20_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00766573 Jy ! Component: 100 - total flux cleaned = 0.0117762 Jy ! Component: 150 - total flux cleaned = 0.0151897 Jy ! Component: 200 - total flux cleaned = 0.0186374 Jy ! Component: 250 - total flux cleaned = 0.0227571 Jy ! Component: 300 - total flux cleaned = 0.0269172 Jy ! Component: 350 - total flux cleaned = 0.0310843 Jy ! Component: 400 - total flux cleaned = 0.0333077 Jy ! Component: 450 - total flux cleaned = 0.0354304 Jy ! Component: 500 - total flux cleaned = 0.037898 Jy ! Component: 550 - total flux cleaned = 0.0398251 Jy ! Component: 600 - total flux cleaned = 0.0414697 Jy ! Component: 650 - total flux cleaned = 0.0428541 Jy ! Component: 700 - total flux cleaned = 0.0439959 Jy ! Component: 750 - total flux cleaned = 0.0452768 Jy ! Component: 800 - total flux cleaned = 0.0461684 Jy ! Component: 850 - total flux cleaned = 0.0475484 Jy ! Component: 900 - total flux cleaned = 0.0485491 Jy ! Component: 950 - total flux cleaned = 0.0493572 Jy ! Component: 1000 - total flux cleaned = 0.050145 Jy ! Component: 1050 - total flux cleaned = 0.0507643 Jy ! Component: 1100 - total flux cleaned = 0.0519665 Jy ! Component: 1150 - total flux cleaned = 0.0526969 Jy ! Component: 1200 - total flux cleaned = 0.0532722 Jy ! Component: 1250 - total flux cleaned = 0.0541099 Jy ! Component: 1300 - total flux cleaned = 0.0546562 Jy ! Component: 1350 - total flux cleaned = 0.0554575 Jy ! Component: 1400 - total flux cleaned = 0.0559795 Jy ! Component: 1450 - total flux cleaned = 0.0564885 Jy ! Component: 1500 - total flux cleaned = 0.056862 Jy ! Component: 1550 - total flux cleaned = 0.0574727 Jy ! Component: 1600 - total flux cleaned = 0.0574759 Jy ! Component: 1650 - total flux cleaned = 0.0582914 Jy ! Component: 1700 - total flux cleaned = 0.058632 Jy ! Component: 1750 - total flux cleaned = 0.0590816 Jy ! Component: 1800 - total flux cleaned = 0.0597387 Jy ! Component: 1850 - total flux cleaned = 0.0600609 Jy ! Component: 1900 - total flux cleaned = 0.0603789 Jy ! Component: 1950 - total flux cleaned = 0.0607962 Jy ! Component: 2000 - total flux cleaned = 0.0613084 Jy ! Total flux subtracted in 2048 components = 0.0615107 Jy ! Clean residual min=-0.006177 max=0.006505 Jy/beam ! Clean residual mean=-0.000065 rms=0.002027 Jy/beam ! Combined flux in latest and established models = 3.98284 Jy keep ! Adding 120 model components to the UV plane model. ! The established model now contains 282 components and 3.98284 Jy ![Exited script file: muppet] wmap "J0609-1542_S_2005_07_20_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.244 x 8.584 at -4.112 degrees (North through East) ! Clean map min=-0.014033 max=3.2468 Jy/beam ! Writing clean map to FITS file: J0609-1542_S_2005_07_20_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 3.24684 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00194913 device "J0609-1542_S_2005_07_20_yyk\_map.eps/VPS" ! Attempting to open device: 'J0609-1542_S_2005_07_20_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.180095 0.180095 0.36019 0.72038 1.44076 2.88152 5.76304 11.5261 23.0522 46.1043 92.2087 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0058 print "peak=",int(peak_flux*1000)/1000 ! peak= 3.246 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.244 x 8.584 at -4.112 degrees (North through East) ! Clean map min=-0.014033 max=3.2468 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0609-1542_S_2005_07_20_yyk\_map.gif/gif" ! Attempting to open device: 'J0609-1542_S_2005_07_20_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0609-1542_S_2005_07_20_yyk_uvs.log closed on Fri Jan 20 10:00:24 2006