! Started logfile: J0553-0840_X_2005_07_09_yyk_uvs.log on Fri Jan 20 11:16:26 2006
obs J0553-0840_X_2005_07_09_yyk_uve.fits
! Reading UV FITS file: J0553-0840_X_2005_07_09_yyk_uve.fits
! AN table 1: 10 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.615556 visibilities/baseline/integration-bin.
! Found source: J0553-0840
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40997e+09        8e+06          1        8e+06
!  02        2  8.47997e+09        8e+06          1        8e+06
!  03        3  8.79497e+09        8e+06          1        8e+06
!  04        4  8.89997e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1480 lines of history.
! 
! Reading 1108 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J0553-0840_X_2005_07_09_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 256x256 pixels with 0.400x0.400 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.127082 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.119 mas, bmaj=4.122 mas, bpa=-3.172 degrees
! Estimated noise=2.36147 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0760037 Jy
! Component: 100  -  total flux cleaned = 0.0977699 Jy
! Total flux subtracted in 100 components = 0.0977699 Jy
! Clean residual min=-0.011401 max=0.014651 Jy/beam
! Clean residual mean=-0.000066 rms=0.003814 Jy/beam
! Combined flux in latest and established models = 0.0977699 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.0977699 Jy
! 
! Correcting IF 1.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.075138Jy  sigma=1.270610
! Fit after  self-cal, rms=0.073926Jy  sigma=1.249116
! Inverting map and beam 
! Estimated beam: bmin=2.119 mas, bmaj=4.122 mas, bpa=-3.172 degrees
! Estimated noise=2.36147 mJy/beam.
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.511 mas, bmaj=4.879 mas, bpa=-7.753 degrees
! Estimated noise=1.52855 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0234916 Jy
! Component: 100  -  total flux cleaned = 0.0337194 Jy
! Component: 150  -  total flux cleaned = 0.0393453 Jy
! Component: 200  -  total flux cleaned = 0.0422368 Jy
! Total flux subtracted in 200 components = 0.0422368 Jy
! Clean residual min=-0.008784 max=0.016964 Jy/beam
! Clean residual mean=-0.000081 rms=0.002991 Jy/beam
! Combined flux in latest and established models = 0.140007 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 25 model components to the UV plane model.
! The established model now contains 28 components and 0.140007 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069216Jy  sigma=1.140382
! Fit after  self-cal, rms=0.069011Jy  sigma=1.138474
! Inverting map 
! Added new window around map position (-4, 2.8).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0153271 Jy
! Component: 100  -  total flux cleaned = 0.0182589 Jy
! Component: 150  -  total flux cleaned = 0.0190751 Jy
! Component: 200  -  total flux cleaned = 0.0189429 Jy
! Total flux subtracted in 200 components = 0.0189429 Jy
! Clean residual min=-0.005673 max=0.005248 Jy/beam
! Clean residual mean=-0.000015 rms=0.001602 Jy/beam
! Combined flux in latest and established models = 0.15895 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 30 model components to the UV plane model.
! The established model now contains 56 components and 0.15895 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066315Jy  sigma=1.083826
! Fit after  self-cal, rms=0.066280Jy  sigma=1.080637
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.511 x 4.879 at -7.753 degrees (North through East)
! Clean map  min=-0.0058799  max=0.099508 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 1.00767
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        1.01     HN        1.00*    KP        0.88     
!   LA        0.97     MK        1.00*    NL        0.97     OV        1.17     
!   PT        1.01     SC        1.00*    
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 1.02551
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.94     HN        1.00*    KP        0.88     
!   LA        1.04     MK        1.00*    NL        0.93     OV        0.85     
!   PT        1.10     SC        1.00*    
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.066280Jy  sigma=1.080637
! Fit after  self-cal, rms=0.064853Jy  sigma=1.070164
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064853Jy  sigma=1.070164
! Fit after  self-cal, rms=0.064836Jy  sigma=1.070111
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.484 mas, bmaj=4.767 mas, bpa=-7.878 degrees
! Estimated noise=1.51153 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00202572 Jy
! Component: 100  -  total flux cleaned = 0.002354 Jy
! Component: 150  -  total flux cleaned = 0.00254909 Jy
! Component: 200  -  total flux cleaned = 0.00280692 Jy
! Total flux subtracted in 200 components = 0.00280692 Jy
! Clean residual min=-0.004796 max=0.004928 Jy/beam
! Clean residual mean=-0.000011 rms=0.001335 Jy/beam
! Combined flux in latest and established models = 0.161757 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 21 model components to the UV plane model.
! The established model now contains 69 components and 0.161757 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064474Jy  sigma=1.063558
! Fit after  self-cal, rms=0.064479Jy  sigma=1.062883
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064479Jy  sigma=1.062883
! Fit after  self-cal, rms=0.058456Jy  sigma=0.970334
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0018171 Jy
! Component: 100  -  total flux cleaned = 0.00236478 Jy
! Component: 150  -  total flux cleaned = 0.00273446 Jy
! Component: 200  -  total flux cleaned = 0.00292616 Jy
! Total flux subtracted in 200 components = 0.00292616 Jy
! Clean residual min=-0.004411 max=0.004329 Jy/beam
! Clean residual mean=-0.000013 rms=0.001209 Jy/beam
! Combined flux in latest and established models = 0.164683 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 21 model components to the UV plane model.
! The established model now contains 82 components and 0.164683 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058212Jy  sigma=0.966038
! Fit after  self-cal, rms=0.057767Jy  sigma=0.959878
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.484 x 4.767 at -7.878 degrees (North through East)
! Clean map  min=-0.0041776  max=0.10134 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057767Jy  sigma=0.959878
! Fit after  self-cal, rms=0.056430Jy  sigma=0.951987
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056430Jy  sigma=0.951987
! Fit after  self-cal, rms=0.056397Jy  sigma=0.951222
! Inverting map and beam 
! Estimated beam: bmin=2.478 mas, bmaj=4.705 mas, bpa=-7.271 degrees
! Estimated noise=1.47084 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -8.17953e-05 Jy
! Component: 100  -  total flux cleaned = 7.21551e-05 Jy
! Component: 150  -  total flux cleaned = 2.76177e-05 Jy
! Component: 200  -  total flux cleaned = -1.18548e-05 Jy
! Total flux subtracted in 200 components = -1.18548e-05 Jy
! Clean residual min=-0.004019 max=0.004069 Jy/beam
! Clean residual mean=-0.000011 rms=0.001154 Jy/beam
! Combined flux in latest and established models = 0.164671 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 26 model components to the UV plane model.
! The established model now contains 98 components and 0.164671 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056353Jy  sigma=0.949751
! Fit after  self-cal, rms=0.056348Jy  sigma=0.949574
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056348Jy  sigma=0.949574
! Fit after  self-cal, rms=0.056533Jy  sigma=0.944321
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056533Jy  sigma=0.944321
! Fit after  self-cal, rms=0.056540Jy  sigma=0.944161
! Inverting map and beam 
! Estimated beam: bmin=2.481 mas, bmaj=4.695 mas, bpa=-7.166 degrees
! Estimated noise=1.46912 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000417055 Jy
! Component: 100  -  total flux cleaned = 0.000538628 Jy
! Component: 150  -  total flux cleaned = 0.000652291 Jy
! Component: 200  -  total flux cleaned = 0.000722965 Jy
! Total flux subtracted in 200 components = 0.000722965 Jy
! Clean residual min=-0.004052 max=0.004131 Jy/beam
! Clean residual mean=-0.000009 rms=0.001155 Jy/beam
! Combined flux in latest and established models = 0.165394 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 22 model components to the UV plane model.
! The established model now contains 108 components and 0.165394 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056508Jy  sigma=0.943273
! Fit after  self-cal, rms=0.056513Jy  sigma=0.943212
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.907 mas, bmaj=4.968 mas, bpa=-5.718 degrees
! Estimated noise=1.50747 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 6.7119e-05 Jy
! Component: 100  -  total flux cleaned = 6.74574e-05 Jy
! Component: 150  -  total flux cleaned = 9.36322e-05 Jy
! Component: 200  -  total flux cleaned = 6.83468e-05 Jy
! Total flux subtracted in 200 components = 6.83468e-05 Jy
! Clean residual min=-0.004418 max=0.004247 Jy/beam
! Clean residual mean=-0.000009 rms=0.001207 Jy/beam
! Combined flux in latest and established models = 0.165462 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 25 model components to the UV plane model.
! The established model now contains 124 components and 0.165462 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056480Jy  sigma=0.942807
! Fit after  self-cal, rms=0.056476Jy  sigma=0.942785
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.099 mas, bmaj=4.075 mas, bpa=-2.714 degrees
! Estimated noise=2.22925 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0771806 Jy
! Component: 100  -  total flux cleaned = 0.102901 Jy
! Component: 150  -  total flux cleaned = 0.118803 Jy
! Component: 200  -  total flux cleaned = 0.129828 Jy
! Total flux subtracted in 200 components = 0.129828 Jy
! Clean residual min=-0.008235 max=0.008442 Jy/beam
! Clean residual mean=-0.000040 rms=0.002399 Jy/beam
! Combined flux in latest and established models = 0.129828 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 25 model components to the UV plane model.
! The established model now contains 25 components and 0.129828 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.481 mas, bmaj=4.695 mas, bpa=-7.166 degrees
! Estimated noise=1.46912 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.014297 Jy
! Component: 100  -  total flux cleaned = 0.0220938 Jy
! Component: 150  -  total flux cleaned = 0.0272532 Jy
! Component: 200  -  total flux cleaned = 0.0299079 Jy
! Total flux subtracted in 200 components = 0.0299079 Jy
! Clean residual min=-0.004991 max=0.004602 Jy/beam
! Clean residual mean=-0.000025 rms=0.001416 Jy/beam
! Combined flux in latest and established models = 0.159736 Jy
! Adding 58 model components to the UV plane model.
! The established model now contains 77 components and 0.159736 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.907 mas, bmaj=4.968 mas, bpa=-5.718 degrees
! Estimated noise=1.50747 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00212266 Jy
! Component: 100  -  total flux cleaned = 0.00285528 Jy
! Component: 150  -  total flux cleaned = 0.00322267 Jy
! Component: 200  -  total flux cleaned = 0.00355196 Jy
! Total flux subtracted in 200 components = 0.00355196 Jy
! Clean residual min=-0.004858 max=0.004142 Jy/beam
! Clean residual mean=-0.000016 rms=0.001315 Jy/beam
! Combined flux in latest and established models = 0.163288 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 92 components and 0.163288 Jy
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.481 mas, bmaj=4.695 mas, bpa=-7.166 degrees
! Estimated noise=1.46912 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000310876 Jy
! Component: 100  -  total flux cleaned = -0.000166872 Jy
! Component: 150  -  total flux cleaned = 0.000159222 Jy
! Component: 200  -  total flux cleaned = 0.000395413 Jy
! Total flux subtracted in 200 components = 0.000395413 Jy
! Clean residual min=-0.004353 max=0.003980 Jy/beam
! Clean residual mean=-0.000014 rms=0.001206 Jy/beam
! Combined flux in latest and established models = 0.163683 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 19 model components to the UV plane model.
! The established model now contains 102 components and 0.163683 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056597Jy  sigma=0.945770
! Fit after  self-cal, rms=0.056583Jy  sigma=0.945478
wmodel J0553-0840_X_2005_07_09_yyk\_map.mod
! Writing 102 model components to file: J0553-0840_X_2005_07_09_yyk_map.mod
wobs J0553-0840_X_2005_07_09_yyk\_uvs.fits
! Writing UV FITS file: J0553-0840_X_2005_07_09_yyk_uvs.fits
wwins J0553-0840_X_2005_07_09_yyk\_map.win
! wwins: Wrote 2 windows to J0553-0840_X_2005_07_09_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=1024  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000274997 Jy
! Component: 100  -  total flux cleaned = 0.000541304 Jy
! Component: 150  -  total flux cleaned = 0.000835213 Jy
! Component: 200  -  total flux cleaned = 0.00100008 Jy
! Component: 250  -  total flux cleaned = 0.00120838 Jy
! Component: 300  -  total flux cleaned = 0.00150205 Jy
! Component: 350  -  total flux cleaned = 0.00178401 Jy
! Component: 400  -  total flux cleaned = 0.00205433 Jy
! Component: 450  -  total flux cleaned = 0.00209853 Jy
! Component: 500  -  total flux cleaned = 0.00222389 Jy
! Component: 550  -  total flux cleaned = 0.00226413 Jy
! Component: 600  -  total flux cleaned = 0.00222603 Jy
! Component: 650  -  total flux cleaned = 0.00241701 Jy
! Component: 700  -  total flux cleaned = 0.00245335 Jy
! Component: 750  -  total flux cleaned = 0.00256207 Jy
! Component: 800  -  total flux cleaned = 0.00259807 Jy
! Component: 850  -  total flux cleaned = 0.00263265 Jy
! Component: 900  -  total flux cleaned = 0.00256632 Jy
! Component: 950  -  total flux cleaned = 0.00269856 Jy
! Component: 1000  -  total flux cleaned = 0.00276277 Jy
! Total flux subtracted in 1024 components = 0.00282636 Jy
! Clean residual min=-0.001833 max=0.001843 Jy/beam
! Clean residual mean=-0.000014 rms=0.000651 Jy/beam
! Combined flux in latest and established models = 0.16651 Jy
keep
! Adding 54 model components to the UV plane model.
! The established model now contains 156 components and 0.16651 Jy
![Exited script file: muppet]
wmap "J0553-0840_X_2005_07_09_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.481 x 4.695 at -7.166 degrees (North through East)
! Clean map  min=-0.0031577  max=0.09846 Jy/beam
! Writing clean map to FITS file: J0553-0840_X_2005_07_09_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0984602 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000658719 
device "J0553-0840_X_2005_07_09_yyk\_map.eps/VPS"
! Attempting to open device: 'J0553-0840_X_2005_07_09_yyk_map.eps/VPS'
loglevs 1*100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.00706 2.00706 4.01412 8.02825 16.0565 32.113 64.226
print "clev=",int(1*3*image_rms*10000)/10000
! clev= 0.0019 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.098 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.481 x 4.695 at -7.166 degrees (North through East)
! Clean map  min=-0.0031577  max=0.09846 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J0553-0840_X_2005_07_09_yyk\_map.gif/gif"
! Attempting to open device: 'J0553-0840_X_2005_07_09_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J0553-0840_X_2005_07_09_yyk_uvs.log closed on Fri Jan 20 11:16:27 2006