! Started logfile: J0551-1909_S_2005_07_08_yyk_uvs.log on Fri Jan 20 09:59:14 2006 obs J0551-1909_S_2005_07_08_yyk_uve.fits ! Reading UV FITS file: J0551-1909_S_2005_07_08_yyk_uve.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.933333 visibilities/baseline/integration-bin. ! Found source: J0551-1909 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1411 lines of history. ! ! Reading 1680 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0551-1909_S_2005_07_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.196815 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.558 mas, bmaj=6.721 mas, bpa=-7.31 degrees ! Estimated noise=1.51755 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.155012 Jy ! Component: 100 - total flux cleaned = 0.178517 Jy ! Total flux subtracted in 100 components = 0.178517 Jy ! Clean residual min=-0.008344 max=0.007293 Jy/beam ! Clean residual mean=-0.000044 rms=0.002160 Jy/beam ! Combined flux in latest and established models = 0.178517 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.178517 Jy ! ! Correcting IF 1. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.074662Jy sigma=1.158390 ! Fit after self-cal, rms=0.074220Jy sigma=1.150743 ! Inverting map and beam ! Estimated beam: bmin=2.559 mas, bmaj=6.724 mas, bpa=-7.31 degrees ! Estimated noise=1.51635 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.217 mas, bmaj=8.105 mas, bpa=-7.515 degrees ! Estimated noise=1.04482 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00262423 Jy ! Component: 100 - total flux cleaned = 0.00313119 Jy ! Component: 150 - total flux cleaned = 0.00342721 Jy ! Component: 200 - total flux cleaned = 0.0037437 Jy ! Total flux subtracted in 200 components = 0.0037437 Jy ! Clean residual min=-0.006799 max=0.008822 Jy/beam ! Clean residual mean=-0.000054 rms=0.001984 Jy/beam ! Combined flux in latest and established models = 0.18226 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 33 components and 0.18226 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074019Jy sigma=1.145413 ! Fit after self-cal, rms=0.074019Jy sigma=1.145390 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.217 x 8.105 at -7.515 degrees (North through East) ! Clean map min=-0.0063839 max=0.1713 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.02045 ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.02 HN 1.08 KP 0.89 ! LA 1.03 MK 0.95 NL 0.94 OV 0.95 ! PT 1.07 SC 0.94 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.992791 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.05 HN 0.97 KP 0.98 ! LA 1.04 MK 1.00 NL 0.91 OV 1.04 ! PT 1.15 SC 0.97 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.074019Jy sigma=1.145390 ! Fit after self-cal, rms=0.072900Jy sigma=1.133080 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072900Jy sigma=1.133080 ! Fit after self-cal, rms=0.072899Jy sigma=1.133058 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.185 mas, bmaj=7.985 mas, bpa=-7.331 degrees ! Estimated noise=1.04568 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00213256 Jy ! Component: 100 - total flux cleaned = 0.00253345 Jy ! Component: 150 - total flux cleaned = 0.00293087 Jy ! Component: 200 - total flux cleaned = 0.0031555 Jy ! Total flux subtracted in 200 components = 0.0031555 Jy ! Clean residual min=-0.006581 max=0.008801 Jy/beam ! Clean residual mean=-0.000039 rms=0.002011 Jy/beam ! Combined flux in latest and established models = 0.185416 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 41 components and 0.185416 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072726Jy sigma=1.130876 ! Fit after self-cal, rms=0.072728Jy sigma=1.130857 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072728Jy sigma=1.130857 ! Fit after self-cal, rms=0.070976Jy sigma=1.104078 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000702718 Jy ! Component: 100 - total flux cleaned = 0.000657218 Jy ! Component: 150 - total flux cleaned = 0.000615896 Jy ! Component: 200 - total flux cleaned = 0.000617377 Jy ! Total flux subtracted in 200 components = 0.000617377 Jy ! Clean residual min=-0.006565 max=0.008733 Jy/beam ! Clean residual mean=-0.000040 rms=0.001999 Jy/beam ! Combined flux in latest and established models = 0.186033 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 46 components and 0.186033 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070865Jy sigma=1.103408 ! Fit after self-cal, rms=0.070767Jy sigma=1.101911 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.185 x 7.985 at -7.331 degrees (North through East) ! Clean map min=-0.0063511 max=0.1714 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070767Jy sigma=1.101911 ! Fit after self-cal, rms=0.069588Jy sigma=1.092197 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069588Jy sigma=1.092197 ! Fit after self-cal, rms=0.069584Jy sigma=1.092036 ! Inverting map and beam ! Estimated beam: bmin=3.185 mas, bmaj=7.915 mas, bpa=-7.156 degrees ! Estimated noise=1.03708 mJy/beam. ! Added new window around map position (-36.5, 52). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00796109 Jy ! Component: 100 - total flux cleaned = 0.0080649 Jy ! Component: 150 - total flux cleaned = 0.00782133 Jy ! Component: 200 - total flux cleaned = 0.00761757 Jy ! Total flux subtracted in 200 components = 0.00761757 Jy ! Clean residual min=-0.005803 max=0.006091 Jy/beam ! Clean residual mean=-0.000046 rms=0.001655 Jy/beam ! Combined flux in latest and established models = 0.193651 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 74 components and 0.193651 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069279Jy sigma=1.075137 ! Fit after self-cal, rms=0.069194Jy sigma=1.073440 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069194Jy sigma=1.073440 ! Fit after self-cal, rms=0.067270Jy sigma=1.050165 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067270Jy sigma=1.050165 ! Fit after self-cal, rms=0.067277Jy sigma=1.050050 ! Inverting map and beam ! Estimated beam: bmin=3.229 mas, bmaj=8.02 mas, bpa=-7.018 degrees ! Estimated noise=1.02732 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000341089 Jy ! Component: 100 - total flux cleaned = -0.000805535 Jy ! Component: 150 - total flux cleaned = -0.00119352 Jy ! Component: 200 - total flux cleaned = -0.00147143 Jy ! Total flux subtracted in 200 components = -0.00147143 Jy ! Clean residual min=-0.005561 max=0.005101 Jy/beam ! Clean residual mean=-0.000051 rms=0.001550 Jy/beam ! Combined flux in latest and established models = 0.192179 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 94 components and 0.192179 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067410Jy sigma=1.046660 ! Fit after self-cal, rms=0.067408Jy sigma=1.046473 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.102 mas, bmaj=15.87 mas, bpa=-4.869 degrees ! Estimated noise=1.31799 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00139852 Jy ! Component: 100 - total flux cleaned = -0.00184687 Jy ! Component: 150 - total flux cleaned = -0.00230684 Jy ! Component: 200 - total flux cleaned = -0.00254057 Jy ! Total flux subtracted in 200 components = -0.00254057 Jy ! Clean residual min=-0.005988 max=0.007040 Jy/beam ! Clean residual mean=-0.000080 rms=0.002241 Jy/beam ! Combined flux in latest and established models = 0.189639 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 99 components and 0.189639 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067534Jy sigma=1.045667 ! Fit after self-cal, rms=0.067531Jy sigma=1.045462 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.566 mas, bmaj=6.706 mas, bpa=-7.103 degrees ! Estimated noise=1.47447 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.151242 Jy ! Component: 100 - total flux cleaned = 0.174449 Jy ! Component: 150 - total flux cleaned = 0.185123 Jy ! Component: 200 - total flux cleaned = 0.190135 Jy ! Total flux subtracted in 200 components = 0.190135 Jy ! Clean residual min=-0.007790 max=0.006319 Jy/beam ! Clean residual mean=-0.000037 rms=0.001686 Jy/beam ! Combined flux in latest and established models = 0.190135 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 43 model components to the UV plane model. ! The established model now contains 43 components and 0.190135 Jy ! Inverting map and beam ! Estimated beam: bmin=3.229 mas, bmaj=8.02 mas, bpa=-7.018 degrees ! Estimated noise=1.02732 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00275011 Jy ! Component: 100 - total flux cleaned = 0.0026161 Jy ! Component: 150 - total flux cleaned = 0.00239953 Jy ! Component: 200 - total flux cleaned = 0.00230027 Jy ! Total flux subtracted in 200 components = 0.00230027 Jy ! Clean residual min=-0.005695 max=0.005251 Jy/beam ! Clean residual mean=-0.000055 rms=0.001587 Jy/beam ! Combined flux in latest and established models = 0.192435 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 67 components and 0.192435 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.102 mas, bmaj=15.87 mas, bpa=-4.869 degrees ! Estimated noise=1.31799 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00133303 Jy ! Component: 100 - total flux cleaned = -0.00192926 Jy ! Component: 150 - total flux cleaned = -0.00242698 Jy ! Component: 200 - total flux cleaned = -0.00269284 Jy ! Total flux subtracted in 200 components = -0.00269284 Jy ! Clean residual min=-0.006246 max=0.006989 Jy/beam ! Clean residual mean=-0.000081 rms=0.002268 Jy/beam ! Combined flux in latest and established models = 0.189742 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 76 components and 0.189742 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.229 mas, bmaj=8.02 mas, bpa=-7.018 degrees ! Estimated noise=1.02732 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000186377 Jy ! Component: 100 - total flux cleaned = 4.80407e-05 Jy ! Component: 150 - total flux cleaned = 5.29783e-05 Jy ! Component: 200 - total flux cleaned = -5.89845e-06 Jy ! Total flux subtracted in 200 components = -5.89845e-06 Jy ! Clean residual min=-0.005384 max=0.005466 Jy/beam ! Clean residual mean=-0.000050 rms=0.001521 Jy/beam ! Combined flux in latest and established models = 0.189737 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 90 components and 0.189737 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067490Jy sigma=1.046316 ! Fit after self-cal, rms=0.067477Jy sigma=1.046213 wmodel J0551-1909_S_2005_07_08_yyk\_map.mod ! Writing 90 model components to file: J0551-1909_S_2005_07_08_yyk_map.mod wobs J0551-1909_S_2005_07_08_yyk\_uvs.fits ! Writing UV FITS file: J0551-1909_S_2005_07_08_yyk_uvs.fits wwins J0551-1909_S_2005_07_08_yyk\_map.win ! wwins: Wrote 2 windows to J0551-1909_S_2005_07_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000789569 Jy ! Component: 100 - total flux cleaned = 0.000792648 Jy ! Component: 150 - total flux cleaned = 0.00104917 Jy ! Component: 200 - total flux cleaned = 0.00120824 Jy ! Component: 250 - total flux cleaned = 0.00113178 Jy ! Component: 300 - total flux cleaned = 0.000985799 Jy ! Component: 350 - total flux cleaned = 0.000845212 Jy ! Component: 400 - total flux cleaned = 0.000912929 Jy ! Component: 450 - total flux cleaned = 0.000714025 Jy ! Component: 500 - total flux cleaned = 0.000842979 Jy ! Component: 550 - total flux cleaned = 0.00077949 Jy ! Component: 600 - total flux cleaned = 0.00083824 Jy ! Component: 650 - total flux cleaned = 0.000660364 Jy ! Component: 700 - total flux cleaned = 0.00071978 Jy ! Component: 750 - total flux cleaned = 0.000832389 Jy ! Component: 800 - total flux cleaned = 0.00105217 Jy ! Component: 850 - total flux cleaned = 0.00121408 Jy ! Component: 900 - total flux cleaned = 0.00137228 Jy ! Component: 950 - total flux cleaned = 0.00168015 Jy ! Component: 1000 - total flux cleaned = 0.00188032 Jy ! Component: 1050 - total flux cleaned = 0.00217463 Jy ! Component: 1100 - total flux cleaned = 0.00246078 Jy ! Component: 1150 - total flux cleaned = 0.00255457 Jy ! Component: 1200 - total flux cleaned = 0.00273912 Jy ! Component: 1250 - total flux cleaned = 0.00287488 Jy ! Component: 1300 - total flux cleaned = 0.0028753 Jy ! Component: 1350 - total flux cleaned = 0.0028324 Jy ! Component: 1400 - total flux cleaned = 0.00296179 Jy ! Component: 1450 - total flux cleaned = 0.00296085 Jy ! Component: 1500 - total flux cleaned = 0.00300124 Jy ! Component: 1550 - total flux cleaned = 0.00291919 Jy ! Component: 1600 - total flux cleaned = 0.00295976 Jy ! Component: 1650 - total flux cleaned = 0.00307822 Jy ! Component: 1700 - total flux cleaned = 0.00311669 Jy ! Component: 1750 - total flux cleaned = 0.00311743 Jy ! Component: 1800 - total flux cleaned = 0.00315585 Jy ! Component: 1850 - total flux cleaned = 0.00311902 Jy ! Component: 1900 - total flux cleaned = 0.00311976 Jy ! Component: 1950 - total flux cleaned = 0.00304737 Jy ! Component: 2000 - total flux cleaned = 0.00315564 Jy ! Total flux subtracted in 2048 components = 0.00301307 Jy ! Clean residual min=-0.001895 max=0.002639 Jy/beam ! Clean residual mean=-0.000040 rms=0.000748 Jy/beam ! Combined flux in latest and established models = 0.19275 Jy keep ! Adding 138 model components to the UV plane model. ! The established model now contains 228 components and 0.19275 Jy ![Exited script file: muppet] wmap "J0551-1909_S_2005_07_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.229 x 8.02 at -7.018 degrees (North through East) ! Clean map min=-0.0050021 max=0.17066 Jy/beam ! Writing clean map to FITS file: J0551-1909_S_2005_07_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.170662 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000747477 device "J0551-1909_S_2005_07_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J0551-1909_S_2005_07_08_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.31396 1.31396 2.62792 5.25585 10.5117 21.0234 42.0468 84.0936 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0022 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.17 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.229 x 8.02 at -7.018 degrees (North through East) ! Clean map min=-0.0050021 max=0.17066 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0551-1909_S_2005_07_08_yyk\_map.gif/gif" ! Attempting to open device: 'J0551-1909_S_2005_07_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0551-1909_S_2005_07_08_yyk_uvs.log closed on Fri Jan 20 09:59:19 2006