! Started logfile: J0544-2241_S_2005_07_08_yyk_uvs.log on Fri Jan 20 09:58:48 2006 obs J0544-2241_S_2005_07_08_yyk_uve.fits ! Reading UV FITS file: J0544-2241_S_2005_07_08_yyk_uve.fits ! AN table 1: 9 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J0544-2241 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1412 lines of history. ! ! Reading 1620 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0544-2241_S_2005_07_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.182156 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.416 mas, bmaj=6.539 mas, bpa=-4.741 degrees ! Estimated noise=1.5311 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.138973 Jy ! Component: 100 - total flux cleaned = 0.162873 Jy ! Total flux subtracted in 100 components = 0.162873 Jy ! Clean residual min=-0.008685 max=0.008590 Jy/beam ! Clean residual mean=-0.000017 rms=0.002060 Jy/beam ! Combined flux in latest and established models = 0.162873 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.162873 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073804Jy sigma=1.107920 ! Fit after self-cal, rms=0.073633Jy sigma=1.103489 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.07 mas, bmaj=8.013 mas, bpa=-5.709 degrees ! Estimated noise=1.07036 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0113091 Jy ! Component: 100 - total flux cleaned = 0.0155041 Jy ! Component: 150 - total flux cleaned = 0.0167736 Jy ! Component: 200 - total flux cleaned = 0.0168981 Jy ! Total flux subtracted in 200 components = 0.0168981 Jy ! Clean residual min=-0.005271 max=0.006087 Jy/beam ! Clean residual mean=-0.000086 rms=0.001547 Jy/beam ! Combined flux in latest and established models = 0.179771 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 37 components and 0.179771 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071797Jy sigma=1.083004 ! Fit after self-cal, rms=0.071780Jy sigma=1.082578 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.07 x 8.013 at -5.709 degrees (North through East) ! Clean map min=-0.0050049 max=0.15837 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.02197 ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.01 HN 1.07 KP 1.00 ! LA 1.07 MK 0.85 NL 0.93 OV 0.95 ! PT 1.08 SC 0.94 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.071780Jy sigma=1.082578 ! Fit after self-cal, rms=0.070902Jy sigma=1.074740 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070902Jy sigma=1.074740 ! Fit after self-cal, rms=0.070901Jy sigma=1.074731 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.022 mas, bmaj=7.881 mas, bpa=-6.058 degrees ! Estimated noise=1.07164 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00297811 Jy ! Component: 100 - total flux cleaned = 0.00310665 Jy ! Component: 150 - total flux cleaned = 0.00316442 Jy ! Component: 200 - total flux cleaned = 0.00321818 Jy ! Total flux subtracted in 200 components = 0.00321818 Jy ! Clean residual min=-0.005188 max=0.006128 Jy/beam ! Clean residual mean=-0.000073 rms=0.001566 Jy/beam ! Combined flux in latest and established models = 0.182989 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 43 components and 0.182989 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070628Jy sigma=1.072424 ! Fit after self-cal, rms=0.070624Jy sigma=1.072237 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070624Jy sigma=1.072237 ! Fit after self-cal, rms=0.068436Jy sigma=1.037046 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000200404 Jy ! Component: 100 - total flux cleaned = 0.000543784 Jy ! Component: 150 - total flux cleaned = 0.000729342 Jy ! Component: 200 - total flux cleaned = 0.000772041 Jy ! Total flux subtracted in 200 components = 0.000772041 Jy ! Clean residual min=-0.005288 max=0.006038 Jy/beam ! Clean residual mean=-0.000074 rms=0.001549 Jy/beam ! Combined flux in latest and established models = 0.183761 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 45 components and 0.183761 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068381Jy sigma=1.035919 ! Fit after self-cal, rms=0.068208Jy sigma=1.033350 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.022 x 7.881 at -6.058 degrees (North through East) ! Clean map min=-0.0050341 max=0.15792 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068208Jy sigma=1.033350 ! Fit after self-cal, rms=0.067411Jy sigma=1.022183 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067411Jy sigma=1.022183 ! Fit after self-cal, rms=0.067416Jy sigma=1.021927 ! Inverting map and beam ! Estimated beam: bmin=2.976 mas, bmaj=7.788 mas, bpa=-6.392 degrees ! Estimated noise=1.06485 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00128535 Jy ! Component: 100 - total flux cleaned = 0.00155518 Jy ! Component: 150 - total flux cleaned = 0.00168037 Jy ! Component: 200 - total flux cleaned = 0.00171814 Jy ! Total flux subtracted in 200 components = 0.00171814 Jy ! Clean residual min=-0.005008 max=0.006247 Jy/beam ! Clean residual mean=-0.000044 rms=0.001499 Jy/beam ! Combined flux in latest and established models = 0.18548 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 48 components and 0.18548 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067267Jy sigma=1.020549 ! Fit after self-cal, rms=0.067263Jy sigma=1.020452 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067263Jy sigma=1.020452 ! Fit after self-cal, rms=0.067040Jy sigma=1.015112 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067040Jy sigma=1.015112 ! Fit after self-cal, rms=0.067041Jy sigma=1.015095 ! Inverting map and beam ! Estimated beam: bmin=2.959 mas, bmaj=7.758 mas, bpa=-6.509 degrees ! Estimated noise=1.0636 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000771633 Jy ! Component: 100 - total flux cleaned = 0.000847916 Jy ! Component: 150 - total flux cleaned = 0.000919161 Jy ! Component: 200 - total flux cleaned = 0.000951897 Jy ! Total flux subtracted in 200 components = 0.000951897 Jy ! Clean residual min=-0.005152 max=0.006212 Jy/beam ! Clean residual mean=-0.000040 rms=0.001491 Jy/beam ! Combined flux in latest and established models = 0.186431 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 49 components and 0.186431 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066977Jy sigma=1.014489 ! Fit after self-cal, rms=0.066974Jy sigma=1.014436 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.878 mas, bmaj=17.27 mas, bpa=-1.163 degrees ! Estimated noise=1.41208 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1, 21). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00852434 Jy ! Component: 100 - total flux cleaned = 0.00904904 Jy ! Component: 150 - total flux cleaned = 0.00812175 Jy ! Component: 200 - total flux cleaned = 0.0072089 Jy ! Total flux subtracted in 200 components = 0.0072089 Jy ! Clean residual min=-0.003770 max=0.005238 Jy/beam ! Clean residual mean=-0.000034 rms=0.001422 Jy/beam ! Combined flux in latest and established models = 0.19364 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 71 model components to the UV plane model. ! The established model now contains 120 components and 0.19364 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066492Jy sigma=1.003565 ! Fit after self-cal, rms=0.066438Jy sigma=1.003020 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.376 mas, bmaj=6.463 mas, bpa=-5.22 degrees ! Estimated noise=1.49286 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.136523 Jy ! Component: 100 - total flux cleaned = 0.163593 Jy ! Component: 150 - total flux cleaned = 0.172125 Jy ! Component: 200 - total flux cleaned = 0.17485 Jy ! Total flux subtracted in 200 components = 0.17485 Jy ! Clean residual min=-0.005870 max=0.006650 Jy/beam ! Clean residual mean=0.000022 rms=0.001637 Jy/beam ! Combined flux in latest and established models = 0.17485 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 44 model components to the UV plane model. ! The established model now contains 44 components and 0.17485 Jy ! Inverting map and beam ! Estimated beam: bmin=2.959 mas, bmaj=7.758 mas, bpa=-6.509 degrees ! Estimated noise=1.0636 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00768191 Jy ! Component: 100 - total flux cleaned = 0.00975953 Jy ! Component: 150 - total flux cleaned = 0.0103385 Jy ! Component: 200 - total flux cleaned = 0.0106815 Jy ! Total flux subtracted in 200 components = 0.0106815 Jy ! Clean residual min=-0.004599 max=0.005059 Jy/beam ! Clean residual mean=-0.000017 rms=0.001162 Jy/beam ! Combined flux in latest and established models = 0.185531 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 101 components and 0.185531 Jy ! Inverting map ! Added new window around map position (-45, 0). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00516472 Jy ! Component: 100 - total flux cleaned = 0.00673162 Jy ! Component: 150 - total flux cleaned = 0.00724183 Jy ! Component: 200 - total flux cleaned = 0.00759461 Jy ! Total flux subtracted in 200 components = 0.00759461 Jy ! Clean residual min=-0.004609 max=0.004240 Jy/beam ! Clean residual mean=-0.000002 rms=0.001029 Jy/beam ! Combined flux in latest and established models = 0.193126 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 123 components and 0.193126 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.878 mas, bmaj=17.27 mas, bpa=-1.163 degrees ! Estimated noise=1.41208 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00328738 Jy ! Component: 100 - total flux cleaned = 0.00487038 Jy ! Component: 150 - total flux cleaned = 0.00564462 Jy ! Component: 200 - total flux cleaned = 0.00641733 Jy ! Total flux subtracted in 200 components = 0.00641733 Jy ! Clean residual min=-0.004355 max=0.003490 Jy/beam ! Clean residual mean=0.000003 rms=0.001177 Jy/beam ! Combined flux in latest and established models = 0.199543 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 173 components and 0.199543 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.959 mas, bmaj=7.758 mas, bpa=-6.509 degrees ! Estimated noise=1.0636 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00122628 Jy ! Component: 100 - total flux cleaned = -0.00142194 Jy ! Component: 150 - total flux cleaned = -0.00142069 Jy ! Component: 200 - total flux cleaned = -0.00107315 Jy ! Total flux subtracted in 200 components = -0.00107315 Jy ! Clean residual min=-0.004450 max=0.003909 Jy/beam ! Clean residual mean=0.000007 rms=0.000935 Jy/beam ! Combined flux in latest and established models = 0.19847 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 41 model components to the UV plane model. ! The established model now contains 204 components and 0.19847 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065265Jy sigma=0.979000 ! Fit after self-cal, rms=0.065194Jy sigma=0.977872 wmodel J0544-2241_S_2005_07_08_yyk\_map.mod ! Writing 204 model components to file: J0544-2241_S_2005_07_08_yyk_map.mod wobs J0544-2241_S_2005_07_08_yyk\_uvs.fits ! Writing UV FITS file: J0544-2241_S_2005_07_08_yyk_uvs.fits wwins J0544-2241_S_2005_07_08_yyk\_map.win ! wwins: Wrote 3 windows to J0544-2241_S_2005_07_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000512619 Jy ! Component: 100 - total flux cleaned = -0.00114815 Jy ! Component: 150 - total flux cleaned = -0.00174292 Jy ! Component: 200 - total flux cleaned = -0.00225037 Jy ! Component: 250 - total flux cleaned = -0.00279052 Jy ! Component: 300 - total flux cleaned = -0.00336095 Jy ! Component: 350 - total flux cleaned = -0.00376002 Jy ! Component: 400 - total flux cleaned = -0.00405032 Jy ! Component: 450 - total flux cleaned = -0.00428405 Jy ! Component: 500 - total flux cleaned = -0.00442037 Jy ! Component: 550 - total flux cleaned = -0.00459783 Jy ! Component: 600 - total flux cleaned = -0.00485859 Jy ! Component: 650 - total flux cleaned = -0.00515453 Jy ! Component: 700 - total flux cleaned = -0.00531986 Jy ! Component: 750 - total flux cleaned = -0.00556231 Jy ! Component: 800 - total flux cleaned = -0.00575946 Jy ! Component: 850 - total flux cleaned = -0.00591452 Jy ! Component: 900 - total flux cleaned = -0.0061417 Jy ! Component: 950 - total flux cleaned = -0.00636446 Jy ! Component: 1000 - total flux cleaned = -0.00651002 Jy ! Component: 1050 - total flux cleaned = -0.00668923 Jy ! Component: 1100 - total flux cleaned = -0.00690008 Jy ! Component: 1150 - total flux cleaned = -0.00703883 Jy ! Component: 1200 - total flux cleaned = -0.00731112 Jy ! Component: 1250 - total flux cleaned = -0.00744503 Jy ! Component: 1300 - total flux cleaned = -0.00767596 Jy ! Component: 1350 - total flux cleaned = -0.00777353 Jy ! Component: 1400 - total flux cleaned = -0.00802935 Jy ! Component: 1450 - total flux cleaned = -0.0081863 Jy ! Component: 1500 - total flux cleaned = -0.00827907 Jy ! Component: 1550 - total flux cleaned = -0.00837066 Jy ! Component: 1600 - total flux cleaned = -0.00840064 Jy ! Component: 1650 - total flux cleaned = -0.00840118 Jy ! Component: 1700 - total flux cleaned = -0.00848965 Jy ! Component: 1750 - total flux cleaned = -0.00851827 Jy ! Component: 1800 - total flux cleaned = -0.00854665 Jy ! Component: 1850 - total flux cleaned = -0.00854647 Jy ! Component: 1900 - total flux cleaned = -0.00857415 Jy ! Component: 1950 - total flux cleaned = -0.0086296 Jy ! Component: 2000 - total flux cleaned = -0.00857502 Jy ! Total flux subtracted in 2048 components = -0.00854816 Jy ! Clean residual min=-0.001467 max=0.001896 Jy/beam ! Clean residual mean=0.000013 rms=0.000536 Jy/beam ! Combined flux in latest and established models = 0.189922 Jy keep ! Adding 115 model components to the UV plane model. ! The established model now contains 318 components and 0.189922 Jy ![Exited script file: muppet] wmap "J0544-2241_S_2005_07_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.959 x 7.758 at -6.509 degrees (North through East) ! Clean map min=-0.0049285 max=0.15464 Jy/beam ! Writing clean map to FITS file: J0544-2241_S_2005_07_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.154636 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000538586 device "J0544-2241_S_2005_07_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J0544-2241_S_2005_07_08_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.04488 1.04488 2.08975 4.1795 8.359 16.718 33.436 66.872 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.154 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.959 x 7.758 at -6.509 degrees (North through East) ! Clean map min=-0.0049285 max=0.15464 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0544-2241_S_2005_07_08_yyk\_map.gif/gif" ! Attempting to open device: 'J0544-2241_S_2005_07_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0544-2241_S_2005_07_08_yyk_uvs.log closed on Fri Jan 20 09:58:52 2006