! Started logfile: J0522-1627_X_2005_07_09_yyk_uvs.log on Fri Jan 20 09:57:44 2006 obs J0522-1627_X_2005_07_09_yyk_uve.fits ! Reading UV FITS file: J0522-1627_X_2005_07_09_yyk_uve.fits ! AN table 1: 12 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.883333 visibilities/baseline/integration-bin. ! Found source: J0522-1627 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1479 lines of history. ! ! Reading 1908 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0522-1627_X_2005_07_09_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.171819 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6879 mas, bmaj=1.708 mas, bpa=0.6561 degrees ! Estimated noise=1.33348 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.131086 Jy ! Component: 100 - total flux cleaned = 0.160255 Jy ! Total flux subtracted in 100 components = 0.160255 Jy ! Clean residual min=-0.006016 max=0.008864 Jy/beam ! Clean residual mean=-0.000012 rms=0.001690 Jy/beam ! Combined flux in latest and established models = 0.160255 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.160255 Jy ! ! Correcting IF 1. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.063225Jy sigma=1.074327 ! Fit after self-cal, rms=0.063044Jy sigma=1.069273 ! Inverting map and beam ! Estimated beam: bmin=0.6879 mas, bmaj=1.708 mas, bpa=0.6561 degrees ! Estimated noise=1.33348 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8708 mas, bmaj=2.104 mas, bpa=-0.2217 degrees ! Estimated noise=0.858218 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0154147 Jy ! Component: 100 - total flux cleaned = 0.0206095 Jy ! Component: 150 - total flux cleaned = 0.0223678 Jy ! Component: 200 - total flux cleaned = 0.0224787 Jy ! Total flux subtracted in 200 components = 0.0224787 Jy ! Clean residual min=-0.003837 max=0.004073 Jy/beam ! Clean residual mean=0.000018 rms=0.001091 Jy/beam ! Combined flux in latest and established models = 0.182734 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 33 components and 0.182734 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060990Jy sigma=1.018616 ! Fit after self-cal, rms=0.060981Jy sigma=1.018413 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8708 x 2.104 at -0.2217 degrees (North through East) ! Clean map min=-0.003513 max=0.15798 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00872 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.97 HN 1.08 KP 0.98 ! LA 0.95 MK 1.03 NL 0.97 OV 1.03 ! PT 0.97 SC 0.94 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.995515 ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00 HN 1.15 KP 0.89 ! LA 0.94 MK 0.99 NL 0.96 OV 1.02 ! PT 1.03 SC 1.00 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.01385 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.01 HN 1.01 KP 0.85 ! LA 0.99 MK 1.04 NL 0.96 OV 0.99 ! PT 1.08 SC 0.90 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.060981Jy sigma=1.018413 ! Fit after self-cal, rms=0.059633Jy sigma=0.997398 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059633Jy sigma=0.997398 ! Fit after self-cal, rms=0.059634Jy sigma=0.997326 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8716 mas, bmaj=2.109 mas, bpa=0.7389 degrees ! Estimated noise=0.844948 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00254909 Jy ! Component: 100 - total flux cleaned = -0.00264699 Jy ! Component: 150 - total flux cleaned = -0.00265085 Jy ! Component: 200 - total flux cleaned = -0.002679 Jy ! Total flux subtracted in 200 components = -0.002679 Jy ! Clean residual min=-0.003252 max=0.003334 Jy/beam ! Clean residual mean=0.000011 rms=0.000870 Jy/beam ! Combined flux in latest and established models = 0.180055 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 40 components and 0.180055 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059545Jy sigma=0.995500 ! Fit after self-cal, rms=0.059542Jy sigma=0.995435 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059542Jy sigma=0.995435 ! Fit after self-cal, rms=0.057932Jy sigma=0.963347 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000558006 Jy ! Component: 100 - total flux cleaned = 0.000535364 Jy ! Component: 150 - total flux cleaned = 0.000490544 Jy ! Component: 200 - total flux cleaned = 0.000447246 Jy ! Total flux subtracted in 200 components = 0.000447246 Jy ! Clean residual min=-0.003223 max=0.003498 Jy/beam ! Clean residual mean=0.000011 rms=0.000864 Jy/beam ! Combined flux in latest and established models = 0.180502 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 43 components and 0.180502 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057919Jy sigma=0.963004 ! Fit after self-cal, rms=0.057821Jy sigma=0.961126 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8716 x 2.109 at 0.7389 degrees (North through East) ! Clean map min=-0.0030854 max=0.15771 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057821Jy sigma=0.961126 ! Fit after self-cal, rms=0.057660Jy sigma=0.939262 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057660Jy sigma=0.939262 ! Fit after self-cal, rms=0.057663Jy sigma=0.939031 ! Inverting map and beam ! Estimated beam: bmin=0.8783 mas, bmaj=2.137 mas, bpa=0.9149 degrees ! Estimated noise=0.844588 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000584564 Jy ! Component: 100 - total flux cleaned = -0.00060444 Jy ! Component: 150 - total flux cleaned = -0.000622161 Jy ! Component: 200 - total flux cleaned = -0.000656177 Jy ! Total flux subtracted in 200 components = -0.000656177 Jy ! Clean residual min=-0.003515 max=0.003236 Jy/beam ! Clean residual mean=0.000007 rms=0.000779 Jy/beam ! Combined flux in latest and established models = 0.179846 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 52 components and 0.179846 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057650Jy sigma=0.938768 ! Fit after self-cal, rms=0.057653Jy sigma=0.938732 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057653Jy sigma=0.938732 ! Fit after self-cal, rms=0.056827Jy sigma=0.923479 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056827Jy sigma=0.923479 ! Fit after self-cal, rms=0.056834Jy sigma=0.923442 ! Inverting map and beam ! Estimated beam: bmin=0.881 mas, bmaj=2.137 mas, bpa=1.031 degrees ! Estimated noise=0.845966 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000230413 Jy ! Component: 100 - total flux cleaned = 0.000230026 Jy ! Component: 150 - total flux cleaned = 0.000197002 Jy ! Component: 200 - total flux cleaned = 0.000166229 Jy ! Total flux subtracted in 200 components = 0.000166229 Jy ! Clean residual min=-0.003421 max=0.003324 Jy/beam ! Clean residual mean=0.000005 rms=0.000792 Jy/beam ! Combined flux in latest and established models = 0.180012 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 55 components and 0.180012 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056825Jy sigma=0.923244 ! Fit after self-cal, rms=0.056828Jy sigma=0.923237 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.444 mas, bmaj=4.791 mas, bpa=3.126 degrees ! Estimated noise=1.07541 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000179451 Jy ! Component: 100 - total flux cleaned = -0.000143557 Jy ! Component: 150 - total flux cleaned = -0.000109971 Jy ! Component: 200 - total flux cleaned = -9.31828e-05 Jy ! Total flux subtracted in 200 components = -9.31828e-05 Jy ! Clean residual min=-0.003478 max=0.003108 Jy/beam ! Clean residual mean=0.000009 rms=0.001030 Jy/beam ! Combined flux in latest and established models = 0.179919 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 5 model components to the UV plane model. ! The established model now contains 57 components and 0.179919 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056822Jy sigma=0.923278 ! Fit after self-cal, rms=0.056821Jy sigma=0.923206 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6914 mas, bmaj=1.721 mas, bpa=0.9781 degrees ! Estimated noise=1.33546 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.131768 Jy ! Component: 100 - total flux cleaned = 0.160051 Jy ! Component: 150 - total flux cleaned = 0.171811 Jy ! Component: 200 - total flux cleaned = 0.177449 Jy ! Total flux subtracted in 200 components = 0.177449 Jy ! Clean residual min=-0.004014 max=0.004403 Jy/beam ! Clean residual mean=-0.000001 rms=0.001147 Jy/beam ! Combined flux in latest and established models = 0.177449 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.177449 Jy ! Inverting map and beam ! Estimated beam: bmin=0.881 mas, bmaj=2.137 mas, bpa=1.031 degrees ! Estimated noise=0.845966 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00283658 Jy ! Component: 100 - total flux cleaned = 0.00288033 Jy ! Component: 150 - total flux cleaned = 0.0028772 Jy ! Component: 200 - total flux cleaned = 0.0028736 Jy ! Total flux subtracted in 200 components = 0.0028736 Jy ! Clean residual min=-0.003503 max=0.003415 Jy/beam ! Clean residual mean=0.000006 rms=0.000801 Jy/beam ! Combined flux in latest and established models = 0.180323 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 34 components and 0.180323 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.444 mas, bmaj=4.791 mas, bpa=3.126 degrees ! Estimated noise=1.07541 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000201501 Jy ! Component: 100 - total flux cleaned = -0.000226464 Jy ! Component: 150 - total flux cleaned = -0.000222176 Jy ! Component: 200 - total flux cleaned = -0.000221495 Jy ! Total flux subtracted in 200 components = -0.000221495 Jy ! Clean residual min=-0.003535 max=0.003116 Jy/beam ! Clean residual mean=0.000010 rms=0.001036 Jy/beam ! Combined flux in latest and established models = 0.180101 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 40 components and 0.180101 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.881 mas, bmaj=2.137 mas, bpa=1.031 degrees ! Estimated noise=0.845966 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000380958 Jy ! Component: 100 - total flux cleaned = 0.000307435 Jy ! Component: 150 - total flux cleaned = 0.000262962 Jy ! Component: 200 - total flux cleaned = 0.000222632 Jy ! Total flux subtracted in 200 components = 0.000222632 Jy ! Clean residual min=-0.003450 max=0.003407 Jy/beam ! Clean residual mean=0.000005 rms=0.000795 Jy/beam ! Combined flux in latest and established models = 0.180324 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 43 components and 0.180324 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056839Jy sigma=0.923638 ! Fit after self-cal, rms=0.056835Jy sigma=0.923610 wmodel J0522-1627_X_2005_07_09_yyk\_map.mod ! Writing 43 model components to file: J0522-1627_X_2005_07_09_yyk_map.mod wobs J0522-1627_X_2005_07_09_yyk\_uvs.fits ! Writing UV FITS file: J0522-1627_X_2005_07_09_yyk_uvs.fits wwins J0522-1627_X_2005_07_09_yyk\_map.win ! wwins: Wrote 1 windows to J0522-1627_X_2005_07_09_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000120211 Jy ! Component: 100 - total flux cleaned = 2.35541e-05 Jy ! Component: 150 - total flux cleaned = 0.000346166 Jy ! Component: 200 - total flux cleaned = 0.000475741 Jy ! Component: 250 - total flux cleaned = 0.000559175 Jy ! Component: 300 - total flux cleaned = 0.00071765 Jy ! Component: 350 - total flux cleaned = 0.000755784 Jy ! Component: 400 - total flux cleaned = 0.000717682 Jy ! Component: 450 - total flux cleaned = 0.000645513 Jy ! Component: 500 - total flux cleaned = 0.000575599 Jy ! Component: 550 - total flux cleaned = 0.000541014 Jy ! Component: 600 - total flux cleaned = 0.000473924 Jy ! Component: 650 - total flux cleaned = 0.000343481 Jy ! Component: 700 - total flux cleaned = 0.000151693 Jy ! Component: 750 - total flux cleaned = 2.61897e-05 Jy ! Component: 800 - total flux cleaned = -0.000128788 Jy ! Component: 850 - total flux cleaned = -0.000311357 Jy ! Component: 900 - total flux cleaned = -0.000311542 Jy ! Component: 950 - total flux cleaned = -0.000400112 Jy ! Component: 1000 - total flux cleaned = -0.000458167 Jy ! Component: 1050 - total flux cleaned = -0.000515631 Jy ! Component: 1100 - total flux cleaned = -0.000599929 Jy ! Component: 1150 - total flux cleaned = -0.000628406 Jy ! Component: 1200 - total flux cleaned = -0.000683711 Jy ! Component: 1250 - total flux cleaned = -0.000791131 Jy ! Component: 1300 - total flux cleaned = -0.000870738 Jy ! Component: 1350 - total flux cleaned = -0.000974201 Jy ! Component: 1400 - total flux cleaned = -0.00102564 Jy ! Component: 1450 - total flux cleaned = -0.00117667 Jy ! Component: 1500 - total flux cleaned = -0.00125089 Jy ! Component: 1550 - total flux cleaned = -0.00134898 Jy ! Component: 1600 - total flux cleaned = -0.00139718 Jy ! Component: 1650 - total flux cleaned = -0.00139725 Jy ! Component: 1700 - total flux cleaned = -0.00149129 Jy ! Component: 1750 - total flux cleaned = -0.00163113 Jy ! Component: 1800 - total flux cleaned = -0.00179214 Jy ! Component: 1850 - total flux cleaned = -0.00186035 Jy ! Component: 1900 - total flux cleaned = -0.00192804 Jy ! Component: 1950 - total flux cleaned = -0.00210596 Jy ! Component: 2000 - total flux cleaned = -0.00210564 Jy ! Total flux subtracted in 2048 components = -0.0020845 Jy ! Clean residual min=-0.001417 max=0.001292 Jy/beam ! Clean residual mean=0.000001 rms=0.000403 Jy/beam ! Combined flux in latest and established models = 0.178239 Jy keep ! Adding 137 model components to the UV plane model. ! The established model now contains 180 components and 0.178239 Jy ![Exited script file: muppet] wmap "J0522-1627_X_2005_07_09_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.881 x 2.137 at 1.031 degrees (North through East) ! Clean map min=-0.0024759 max=0.15875 Jy/beam ! Writing clean map to FITS file: J0522-1627_X_2005_07_09_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.158749 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000402781 device "J0522-1627_X_2005_07_09_yyk\_map.eps/VPS" ! Attempting to open device: 'J0522-1627_X_2005_07_09_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.761165 0.761165 1.52233 3.04466 6.08932 12.1786 24.3573 48.7145 97.4291 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.158 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.881 x 2.137 at 1.031 degrees (North through East) ! Clean map min=-0.0024759 max=0.15875 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0522-1627_X_2005_07_09_yyk\_map.gif/gif" ! Attempting to open device: 'J0522-1627_X_2005_07_09_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0522-1627_X_2005_07_09_yyk_uvs.log closed on Fri Jan 20 09:57:48 2006