! Started logfile: J0517-1756_X_2005_07_09_yyk_uvs.log on Fri Jan 20 09:57:27 2006 obs J0517-1756_X_2005_07_09_yyk_uve.fits ! Reading UV FITS file: J0517-1756_X_2005_07_09_yyk_uve.fits ! AN table 1: 11 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.719192 visibilities/baseline/integration-bin. ! Found source: J0517-1756 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1479 lines of history. ! ! Reading 1424 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0517-1756_X_2005_07_09_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.133029 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7988 mas, bmaj=2.105 mas, bpa=-12.57 degrees ! Estimated noise=1.57346 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0914973 Jy ! Component: 100 - total flux cleaned = 0.11059 Jy ! Total flux subtracted in 100 components = 0.11059 Jy ! Clean residual min=-0.007591 max=0.008739 Jy/beam ! Clean residual mean=-0.000054 rms=0.002293 Jy/beam ! Combined flux in latest and established models = 0.11059 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.11059 Jy ! ! Correcting IF 1. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.070997Jy sigma=1.129053 ! Fit after self-cal, rms=0.070629Jy sigma=1.123713 ! Inverting map and beam ! Estimated beam: bmin=0.7987 mas, bmaj=2.104 mas, bpa=-12.6 degrees ! Estimated noise=1.57334 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.046 mas, bmaj=2.664 mas, bpa=-11.3 degrees ! Estimated noise=1.06853 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0141428 Jy ! Component: 100 - total flux cleaned = 0.0196682 Jy ! Component: 150 - total flux cleaned = 0.0216351 Jy ! Component: 200 - total flux cleaned = 0.0219935 Jy ! Total flux subtracted in 200 components = 0.0219935 Jy ! Clean residual min=-0.006359 max=0.011304 Jy/beam ! Clean residual mean=-0.000078 rms=0.002258 Jy/beam ! Combined flux in latest and established models = 0.132584 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 32 components and 0.132584 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069200Jy sigma=1.083382 ! Fit after self-cal, rms=0.069184Jy sigma=1.083202 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.046 x 2.664 at -11.3 degrees (North through East) ! Clean map min=-0.006055 max=0.10497 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00643 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.99 HN 1.00* KP 0.90 ! LA 0.95 MK 0.91 NL 1.05 OV 1.12 ! PT 0.92 SC 1.07 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00535 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.01 HN 1.00* KP 0.88 ! LA 0.91 MK 0.97 NL 1.00 OV 1.05 ! PT 1.02 SC 1.05 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.069184Jy sigma=1.083202 ! Fit after self-cal, rms=0.068461Jy sigma=1.070850 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068461Jy sigma=1.070850 ! Fit after self-cal, rms=0.068453Jy sigma=1.070786 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.037 mas, bmaj=2.767 mas, bpa=-12.79 degrees ! Estimated noise=1.05325 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, -2.6). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0124234 Jy ! Component: 100 - total flux cleaned = 0.0174686 Jy ! Component: 150 - total flux cleaned = 0.0179508 Jy ! Component: 200 - total flux cleaned = 0.0183238 Jy ! Total flux subtracted in 200 components = 0.0183238 Jy ! Clean residual min=-0.004145 max=0.004153 Jy/beam ! Clean residual mean=-0.000019 rms=0.001166 Jy/beam ! Combined flux in latest and established models = 0.150908 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 39 model components to the UV plane model. ! The established model now contains 71 components and 0.150908 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067117Jy sigma=1.036051 ! Fit after self-cal, rms=0.067060Jy sigma=1.033800 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067060Jy sigma=1.033800 ! Fit after self-cal, rms=0.063909Jy sigma=0.982215 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00287195 Jy ! Component: 100 - total flux cleaned = 0.00374374 Jy ! Component: 150 - total flux cleaned = 0.00429354 Jy ! Component: 200 - total flux cleaned = 0.00445983 Jy ! Total flux subtracted in 200 components = 0.00445983 Jy ! Clean residual min=-0.003892 max=0.003789 Jy/beam ! Clean residual mean=-0.000010 rms=0.001029 Jy/beam ! Combined flux in latest and established models = 0.155367 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 84 components and 0.155367 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063795Jy sigma=0.979688 ! Fit after self-cal, rms=0.063714Jy sigma=0.975632 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.037 x 2.767 at -12.79 degrees (North through East) ! Clean map min=-0.0035616 max=0.1064 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063714Jy sigma=0.975632 ! Fit after self-cal, rms=0.062251Jy sigma=0.967468 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062251Jy sigma=0.967468 ! Fit after self-cal, rms=0.062309Jy sigma=0.966973 ! Inverting map and beam ! Estimated beam: bmin=1.018 mas, bmaj=2.768 mas, bpa=-13.05 degrees ! Estimated noise=1.0302 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114152 Jy ! Component: 100 - total flux cleaned = 0.00188459 Jy ! Component: 150 - total flux cleaned = 0.00224935 Jy ! Component: 200 - total flux cleaned = 0.00251155 Jy ! Total flux subtracted in 200 components = 0.00251155 Jy ! Clean residual min=-0.003222 max=0.003657 Jy/beam ! Clean residual mean=-0.000018 rms=0.000962 Jy/beam ! Combined flux in latest and established models = 0.157879 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 102 components and 0.157879 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062198Jy sigma=0.964605 ! Fit after self-cal, rms=0.062238Jy sigma=0.964351 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062238Jy sigma=0.964351 ! Fit after self-cal, rms=0.061807Jy sigma=0.953134 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061807Jy sigma=0.953134 ! Fit after self-cal, rms=0.061817Jy sigma=0.953002 ! Inverting map and beam ! Estimated beam: bmin=1.022 mas, bmaj=2.8 mas, bpa=-13.04 degrees ! Estimated noise=1.02351 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000229268 Jy ! Component: 100 - total flux cleaned = 0.000522892 Jy ! Component: 150 - total flux cleaned = 0.00064659 Jy ! Component: 200 - total flux cleaned = 0.000719797 Jy ! Total flux subtracted in 200 components = 0.000719797 Jy ! Clean residual min=-0.003298 max=0.003718 Jy/beam ! Clean residual mean=-0.000018 rms=0.000922 Jy/beam ! Combined flux in latest and established models = 0.158599 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 116 components and 0.158599 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061761Jy sigma=0.951792 ! Fit after self-cal, rms=0.061771Jy sigma=0.951716 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.612 mas, bmaj=5.198 mas, bpa=0.02433 degrees ! Estimated noise=1.2012 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000863298 Jy ! Component: 100 - total flux cleaned = 0.00097662 Jy ! Component: 150 - total flux cleaned = 0.00107203 Jy ! Component: 200 - total flux cleaned = 0.00109288 Jy ! Total flux subtracted in 200 components = 0.00109288 Jy ! Clean residual min=-0.003261 max=0.003292 Jy/beam ! Clean residual mean=-0.000024 rms=0.001022 Jy/beam ! Combined flux in latest and established models = 0.159692 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 124 components and 0.159692 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061741Jy sigma=0.951479 ! Fit after self-cal, rms=0.061752Jy sigma=0.951450 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7941 mas, bmaj=2.162 mas, bpa=-13.32 degrees ! Estimated noise=1.51978 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0898739 Jy ! Component: 100 - total flux cleaned = 0.109829 Jy ! Component: 150 - total flux cleaned = 0.121232 Jy ! Component: 200 - total flux cleaned = 0.129439 Jy ! Total flux subtracted in 200 components = 0.129439 Jy ! Clean residual min=-0.005915 max=0.005088 Jy/beam ! Clean residual mean=-0.000040 rms=0.001595 Jy/beam ! Combined flux in latest and established models = 0.129439 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 0.129439 Jy ! Inverting map and beam ! Estimated beam: bmin=1.022 mas, bmaj=2.8 mas, bpa=-13.04 degrees ! Estimated noise=1.02351 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00993887 Jy ! Component: 100 - total flux cleaned = 0.0159487 Jy ! Component: 150 - total flux cleaned = 0.0201025 Jy ! Component: 200 - total flux cleaned = 0.0230661 Jy ! Total flux subtracted in 200 components = 0.0230661 Jy ! Clean residual min=-0.003381 max=0.003503 Jy/beam ! Clean residual mean=-0.000034 rms=0.000997 Jy/beam ! Combined flux in latest and established models = 0.152505 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 90 components and 0.152505 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.612 mas, bmaj=5.198 mas, bpa=0.02433 degrees ! Estimated noise=1.2012 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0031006 Jy ! Component: 100 - total flux cleaned = 0.00494671 Jy ! Component: 150 - total flux cleaned = 0.00599275 Jy ! Component: 200 - total flux cleaned = 0.00630889 Jy ! Total flux subtracted in 200 components = 0.00630889 Jy ! Clean residual min=-0.003250 max=0.003206 Jy/beam ! Clean residual mean=-0.000029 rms=0.001034 Jy/beam ! Combined flux in latest and established models = 0.158814 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 109 components and 0.158814 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.022 mas, bmaj=2.8 mas, bpa=-13.04 degrees ! Estimated noise=1.02351 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000162244 Jy ! Component: 100 - total flux cleaned = -7.05845e-05 Jy ! Component: 150 - total flux cleaned = -3.15215e-05 Jy ! Component: 200 - total flux cleaned = 3.56126e-05 Jy ! Total flux subtracted in 200 components = 3.56126e-05 Jy ! Clean residual min=-0.003254 max=0.003722 Jy/beam ! Clean residual mean=-0.000018 rms=0.000923 Jy/beam ! Combined flux in latest and established models = 0.15885 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 122 components and 0.15885 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061785Jy sigma=0.952106 ! Fit after self-cal, rms=0.061753Jy sigma=0.951819 wmodel J0517-1756_X_2005_07_09_yyk\_map.mod ! Writing 122 model components to file: J0517-1756_X_2005_07_09_yyk_map.mod wobs J0517-1756_X_2005_07_09_yyk\_uvs.fits ! Writing UV FITS file: J0517-1756_X_2005_07_09_yyk_uvs.fits wwins J0517-1756_X_2005_07_09_yyk\_map.win ! wwins: Wrote 2 windows to J0517-1756_X_2005_07_09_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000797652 Jy ! Component: 100 - total flux cleaned = 0.000973334 Jy ! Component: 150 - total flux cleaned = 0.000816096 Jy ! Component: 200 - total flux cleaned = 0.000567661 Jy ! Component: 250 - total flux cleaned = 0.000425238 Jy ! Component: 300 - total flux cleaned = 0.000244037 Jy ! Component: 350 - total flux cleaned = 0.000113419 Jy ! Component: 400 - total flux cleaned = -0.000178483 Jy ! Component: 450 - total flux cleaned = -0.000380184 Jy ! Component: 500 - total flux cleaned = -0.000576352 Jy ! Component: 550 - total flux cleaned = -0.000691772 Jy ! Component: 600 - total flux cleaned = -0.000729421 Jy ! Component: 650 - total flux cleaned = -0.000839799 Jy ! Component: 700 - total flux cleaned = -0.00091143 Jy ! Component: 750 - total flux cleaned = -0.000946996 Jy ! Component: 800 - total flux cleaned = -0.00115325 Jy ! Component: 850 - total flux cleaned = -0.00122014 Jy ! Component: 900 - total flux cleaned = -0.00141926 Jy ! Component: 950 - total flux cleaned = -0.00161434 Jy ! Component: 1000 - total flux cleaned = -0.00170986 Jy ! Component: 1050 - total flux cleaned = -0.0017415 Jy ! Component: 1100 - total flux cleaned = -0.00177245 Jy ! Component: 1150 - total flux cleaned = -0.00183367 Jy ! Component: 1200 - total flux cleaned = -0.00183382 Jy ! Component: 1250 - total flux cleaned = -0.00183456 Jy ! Component: 1300 - total flux cleaned = -0.00198008 Jy ! Component: 1350 - total flux cleaned = -0.00206622 Jy ! Component: 1400 - total flux cleaned = -0.00223544 Jy ! Component: 1450 - total flux cleaned = -0.00226301 Jy ! Component: 1500 - total flux cleaned = -0.00229011 Jy ! Component: 1550 - total flux cleaned = -0.00234423 Jy ! Component: 1600 - total flux cleaned = -0.00234409 Jy ! Component: 1650 - total flux cleaned = -0.00242293 Jy ! Component: 1700 - total flux cleaned = -0.00242263 Jy ! Component: 1750 - total flux cleaned = -0.00244794 Jy ! Component: 1800 - total flux cleaned = -0.00249839 Jy ! Component: 1850 - total flux cleaned = -0.00252338 Jy ! Component: 1900 - total flux cleaned = -0.00257261 Jy ! Component: 1950 - total flux cleaned = -0.00264622 Jy ! Component: 2000 - total flux cleaned = -0.00279105 Jy ! Total flux subtracted in 2048 components = -0.00291018 Jy ! Clean residual min=-0.001346 max=0.001731 Jy/beam ! Clean residual mean=-0.000015 rms=0.000477 Jy/beam ! Combined flux in latest and established models = 0.15594 Jy keep ! Adding 133 model components to the UV plane model. ! The established model now contains 255 components and 0.15594 Jy ![Exited script file: muppet] wmap "J0517-1756_X_2005_07_09_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.022 x 2.8 at -13.04 degrees (North through East) ! Clean map min=-0.0025571 max=0.10653 Jy/beam ! Writing clean map to FITS file: J0517-1756_X_2005_07_09_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.106535 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000466758 device "J0517-1756_X_2005_07_09_yyk\_map.eps/VPS" ! Attempting to open device: 'J0517-1756_X_2005_07_09_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.31438 1.31438 2.62876 5.25752 10.515 21.0301 42.0602 84.1204 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.106 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.022 x 2.8 at -13.04 degrees (North through East) ! Clean map min=-0.0025571 max=0.10653 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0517-1756_X_2005_07_09_yyk\_map.gif/gif" ! Attempting to open device: 'J0517-1756_X_2005_07_09_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0517-1756_X_2005_07_09_yyk_uvs.log closed on Fri Jan 20 09:57:31 2006