! Started logfile: J0517-0520_X_2005_07_08_yyk_uvs.log on Fri Jan 20 09:57:18 2006 obs J0517-0520_X_2005_07_08_yyk_uve.fits ! Reading UV FITS file: J0517-0520_X_2005_07_08_yyk_uve.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.88 visibilities/baseline/integration-bin. ! Found source: J0517-0520 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1407 lines of history. ! ! Reading 1584 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0517-0520_X_2005_07_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.142785 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7278 mas, bmaj=1.973 mas, bpa=-6.641 degrees ! Estimated noise=1.42765 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0909693 Jy ! Component: 100 - total flux cleaned = 0.111852 Jy ! Total flux subtracted in 100 components = 0.111852 Jy ! Clean residual min=-0.010207 max=0.012112 Jy/beam ! Clean residual mean=-0.000007 rms=0.002733 Jy/beam ! Combined flux in latest and established models = 0.111852 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.111852 Jy ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.095044Jy sigma=1.585942 ! Fit after self-cal, rms=0.085565Jy sigma=1.369205 ! Inverting map and beam ! Estimated beam: bmin=0.7278 mas, bmaj=1.973 mas, bpa=-6.641 degrees ! Estimated noise=1.42765 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9666 mas, bmaj=2.398 mas, bpa=-5.543 degrees ! Estimated noise=1.02899 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0138083 Jy ! Component: 100 - total flux cleaned = 0.0174026 Jy ! Component: 150 - total flux cleaned = 0.0174929 Jy ! Component: 200 - total flux cleaned = 0.0175647 Jy ! Total flux subtracted in 200 components = 0.0175647 Jy ! Clean residual min=-0.006548 max=0.009139 Jy/beam ! Clean residual mean=0.000032 rms=0.002246 Jy/beam ! Combined flux in latest and established models = 0.129416 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 24 components and 0.129416 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084026Jy sigma=1.341021 ! Fit after self-cal, rms=0.074304Jy sigma=1.074155 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9666 x 2.398 at -5.543 degrees (North through East) ! Clean map min=-0.0054092 max=0.123 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.0186 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.89 HN 0.99 KP 0.91 ! LA 0.91 MK 1.17 NL 0.92 OV 1.00 ! PT 0.99 SC 1.04 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.074304Jy sigma=1.074155 ! Fit after self-cal, rms=0.074111Jy sigma=1.065699 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074111Jy sigma=1.065699 ! Fit after self-cal, rms=0.074093Jy sigma=1.065429 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.996 mas, bmaj=2.45 mas, bpa=-5.239 degrees ! Estimated noise=1.0178 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00817834 Jy ! Component: 100 - total flux cleaned = 0.0114637 Jy ! Component: 150 - total flux cleaned = 0.0129612 Jy ! Component: 200 - total flux cleaned = 0.0130737 Jy ! Total flux subtracted in 200 components = 0.0130737 Jy ! Clean residual min=-0.004691 max=0.005522 Jy/beam ! Clean residual mean=-0.000007 rms=0.001143 Jy/beam ! Combined flux in latest and established models = 0.14249 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 37 components and 0.14249 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073496Jy sigma=1.052524 ! Fit after self-cal, rms=0.073467Jy sigma=1.051987 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073467Jy sigma=1.051987 ! Fit after self-cal, rms=0.069776Jy sigma=0.992472 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.2, -11). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0050941 Jy ! Component: 100 - total flux cleaned = 0.00651731 Jy ! Component: 150 - total flux cleaned = 0.0074453 Jy ! Component: 200 - total flux cleaned = 0.00806433 Jy ! Total flux subtracted in 200 components = 0.00806433 Jy ! Clean residual min=-0.004082 max=0.003566 Jy/beam ! Clean residual mean=-0.000013 rms=0.000948 Jy/beam ! Combined flux in latest and established models = 0.150554 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 56 components and 0.150554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069418Jy sigma=0.983222 ! Fit after self-cal, rms=0.069185Jy sigma=0.979356 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.996 x 2.45 at -5.239 degrees (North through East) ! Clean map min=-0.0037666 max=0.12302 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069185Jy sigma=0.979356 ! Fit after self-cal, rms=0.069185Jy sigma=0.979356 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069185Jy sigma=0.979356 ! Fit after self-cal, rms=0.069158Jy sigma=0.979040 ! Inverting map and beam ! Estimated beam: bmin=0.996 mas, bmaj=2.45 mas, bpa=-5.239 degrees ! Estimated noise=1.0178 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000642772 Jy ! Component: 100 - total flux cleaned = 0.000950077 Jy ! Component: 150 - total flux cleaned = 0.00123003 Jy ! Component: 200 - total flux cleaned = 0.00154493 Jy ! Total flux subtracted in 200 components = 0.00154493 Jy ! Clean residual min=-0.003963 max=0.003313 Jy/beam ! Clean residual mean=-0.000011 rms=0.000926 Jy/beam ! Combined flux in latest and established models = 0.152099 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 62 components and 0.152099 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069035Jy sigma=0.976817 ! Fit after self-cal, rms=0.069016Jy sigma=0.976696 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069016Jy sigma=0.976696 ! Fit after self-cal, rms=0.069016Jy sigma=0.976696 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069016Jy sigma=0.976696 ! Fit after self-cal, rms=0.069011Jy sigma=0.976688 ! Inverting map and beam ! Estimated beam: bmin=0.996 mas, bmaj=2.45 mas, bpa=-5.239 degrees ! Estimated noise=1.0178 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000503501 Jy ! Component: 100 - total flux cleaned = 0.000614333 Jy ! Component: 150 - total flux cleaned = 0.000768424 Jy ! Component: 200 - total flux cleaned = 0.000817396 Jy ! Total flux subtracted in 200 components = 0.000817396 Jy ! Clean residual min=-0.003854 max=0.003250 Jy/beam ! Clean residual mean=-0.000010 rms=0.000916 Jy/beam ! Combined flux in latest and established models = 0.152917 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 68 components and 0.152917 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068949Jy sigma=0.975515 ! Fit after self-cal, rms=0.068936Jy sigma=0.975477 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.319 mas, bmaj=3.912 mas, bpa=-8.042 degrees ! Estimated noise=1.23584 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000390007 Jy ! Component: 100 - total flux cleaned = 0.000799299 Jy ! Component: 150 - total flux cleaned = 0.000970281 Jy ! Component: 200 - total flux cleaned = 0.0010154 Jy ! Total flux subtracted in 200 components = 0.0010154 Jy ! Clean residual min=-0.003979 max=0.003007 Jy/beam ! Clean residual mean=-0.000016 rms=0.000996 Jy/beam ! Combined flux in latest and established models = 0.153932 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 76 components and 0.153932 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068930Jy sigma=0.975342 ! Fit after self-cal, rms=0.068925Jy sigma=0.975287 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7364 mas, bmaj=1.986 mas, bpa=-6.445 degrees ! Estimated noise=1.4298 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.103431 Jy ! Component: 100 - total flux cleaned = 0.127095 Jy ! Component: 150 - total flux cleaned = 0.135533 Jy ! Component: 200 - total flux cleaned = 0.140298 Jy ! Total flux subtracted in 200 components = 0.140298 Jy ! Clean residual min=-0.006081 max=0.006600 Jy/beam ! Clean residual mean=-0.000014 rms=0.001666 Jy/beam ! Combined flux in latest and established models = 0.140298 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.140298 Jy ! Inverting map and beam ! Estimated beam: bmin=0.996 mas, bmaj=2.45 mas, bpa=-5.239 degrees ! Estimated noise=1.0178 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00567435 Jy ! Component: 100 - total flux cleaned = 0.0084219 Jy ! Component: 150 - total flux cleaned = 0.00961983 Jy ! Component: 200 - total flux cleaned = 0.0105322 Jy ! Total flux subtracted in 200 components = 0.0105322 Jy ! Clean residual min=-0.004088 max=0.003313 Jy/beam ! Clean residual mean=-0.000011 rms=0.000950 Jy/beam ! Combined flux in latest and established models = 0.15083 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 48 components and 0.15083 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.319 mas, bmaj=3.912 mas, bpa=-8.042 degrees ! Estimated noise=1.23584 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00165475 Jy ! Component: 100 - total flux cleaned = 0.00223877 Jy ! Component: 150 - total flux cleaned = 0.00276484 Jy ! Component: 200 - total flux cleaned = 0.00303456 Jy ! Total flux subtracted in 200 components = 0.00303456 Jy ! Clean residual min=-0.003837 max=0.003079 Jy/beam ! Clean residual mean=-0.000016 rms=0.001000 Jy/beam ! Combined flux in latest and established models = 0.153864 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 59 components and 0.153864 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.996 mas, bmaj=2.45 mas, bpa=-5.239 degrees ! Estimated noise=1.0178 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 6.17092e-05 Jy ! Component: 100 - total flux cleaned = 0.000193371 Jy ! Component: 150 - total flux cleaned = 0.000131696 Jy ! Component: 200 - total flux cleaned = 0.000131551 Jy ! Total flux subtracted in 200 components = 0.000131551 Jy ! Clean residual min=-0.003720 max=0.003121 Jy/beam ! Clean residual mean=-0.000009 rms=0.000915 Jy/beam ! Combined flux in latest and established models = 0.153996 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 73 components and 0.153996 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069091Jy sigma=0.976279 ! Fit after self-cal, rms=0.069051Jy sigma=0.976068 wmodel J0517-0520_X_2005_07_08_yyk\_map.mod ! Writing 73 model components to file: J0517-0520_X_2005_07_08_yyk_map.mod wobs J0517-0520_X_2005_07_08_yyk\_uvs.fits ! Writing UV FITS file: J0517-0520_X_2005_07_08_yyk_uvs.fits wwins J0517-0520_X_2005_07_08_yyk\_map.win ! wwins: Wrote 2 windows to J0517-0520_X_2005_07_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00117699 Jy ! Component: 100 - total flux cleaned = -0.00163337 Jy ! Component: 150 - total flux cleaned = -0.00195686 Jy ! Component: 200 - total flux cleaned = -0.00221477 Jy ! Component: 250 - total flux cleaned = -0.00241512 Jy ! Component: 300 - total flux cleaned = -0.00231847 Jy ! Component: 350 - total flux cleaned = -0.00255571 Jy ! Component: 400 - total flux cleaned = -0.00269508 Jy ! Component: 450 - total flux cleaned = -0.00292086 Jy ! Component: 500 - total flux cleaned = -0.00300954 Jy ! Component: 550 - total flux cleaned = -0.00318271 Jy ! Component: 600 - total flux cleaned = -0.00335249 Jy ! Component: 650 - total flux cleaned = -0.00351875 Jy ! Component: 700 - total flux cleaned = -0.00360127 Jy ! Component: 750 - total flux cleaned = -0.00388347 Jy ! Component: 800 - total flux cleaned = -0.00411952 Jy ! Component: 850 - total flux cleaned = -0.00439174 Jy ! Component: 900 - total flux cleaned = -0.00462052 Jy ! Component: 950 - total flux cleaned = -0.00484579 Jy ! Component: 1000 - total flux cleaned = -0.00495652 Jy ! Component: 1050 - total flux cleaned = -0.00499342 Jy ! Component: 1100 - total flux cleaned = -0.00517328 Jy ! Component: 1150 - total flux cleaned = -0.00531537 Jy ! Component: 1200 - total flux cleaned = -0.00538567 Jy ! Component: 1250 - total flux cleaned = -0.00549019 Jy ! Component: 1300 - total flux cleaned = -0.00569604 Jy ! Component: 1350 - total flux cleaned = -0.00593326 Jy ! Component: 1400 - total flux cleaned = -0.00613403 Jy ! Component: 1450 - total flux cleaned = -0.00623273 Jy ! Component: 1500 - total flux cleaned = -0.00639646 Jy ! Component: 1550 - total flux cleaned = -0.0064617 Jy ! Component: 1600 - total flux cleaned = -0.00668654 Jy ! Component: 1650 - total flux cleaned = -0.00678183 Jy ! Component: 1700 - total flux cleaned = -0.00697056 Jy ! Component: 1750 - total flux cleaned = -0.00712611 Jy ! Component: 1800 - total flux cleaned = -0.00715731 Jy ! Component: 1850 - total flux cleaned = -0.00734031 Jy ! Component: 1900 - total flux cleaned = -0.00743088 Jy ! Component: 1950 - total flux cleaned = -0.00749041 Jy ! Component: 2000 - total flux cleaned = -0.0075494 Jy ! Total flux subtracted in 2048 components = -0.00763749 Jy ! Clean residual min=-0.002108 max=0.001721 Jy/beam ! Clean residual mean=0.000000 rms=0.000568 Jy/beam ! Combined flux in latest and established models = 0.146358 Jy keep ! Adding 125 model components to the UV plane model. ! The established model now contains 198 components and 0.146358 Jy ![Exited script file: muppet] wmap "J0517-0520_X_2005_07_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.996 x 2.45 at -5.239 degrees (North through East) ! Clean map min=-0.0029961 max=0.12207 Jy/beam ! Writing clean map to FITS file: J0517-0520_X_2005_07_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.122075 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000568803 device "J0517-0520_X_2005_07_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J0517-0520_X_2005_07_08_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.39784 1.39784 2.79568 5.59135 11.1827 22.3654 44.7308 89.4616 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.122 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.996 x 2.45 at -5.239 degrees (North through East) ! Clean map min=-0.0029961 max=0.12207 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0517-0520_X_2005_07_08_yyk\_map.gif/gif" ! Attempting to open device: 'J0517-0520_X_2005_07_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0517-0520_X_2005_07_08_yyk_uvs.log closed on Fri Jan 20 09:57:22 2006