! Started logfile: J0517-0520_S_2005_07_08_yyk_uvs.log on Fri Jan 20 09:57:13 2006 obs J0517-0520_S_2005_07_08_yyk_uve.fits ! Reading UV FITS file: J0517-0520_S_2005_07_08_yyk_uve.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.88 visibilities/baseline/integration-bin. ! Found source: J0517-0520 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1416 lines of history. ! ! Reading 1584 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0517-0520_S_2005_07_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.146201 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.811 mas, bmaj=13.68 mas, bpa=-19.26 degrees ! Estimated noise=1.67979 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0976949 Jy ! Component: 100 - total flux cleaned = 0.124289 Jy ! Total flux subtracted in 100 components = 0.124289 Jy ! Clean residual min=-0.008567 max=0.009495 Jy/beam ! Clean residual mean=0.000076 rms=0.002781 Jy/beam ! Combined flux in latest and established models = 0.124289 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.124289 Jy ! ! Correcting IF 1. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.080518Jy sigma=1.188924 ! Fit after self-cal, rms=0.078188Jy sigma=1.140029 ! Inverting map and beam ! Estimated beam: bmin=2.811 mas, bmaj=13.68 mas, bpa=-19.26 degrees ! Estimated noise=1.67979 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.495 mas, bmaj=16.35 mas, bpa=-19.33 degrees ! Estimated noise=1.18592 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0182325 Jy ! Component: 100 - total flux cleaned = 0.0268263 Jy ! Component: 150 - total flux cleaned = 0.0316482 Jy ! Component: 200 - total flux cleaned = 0.0342175 Jy ! Total flux subtracted in 200 components = 0.0342175 Jy ! Clean residual min=-0.004423 max=0.004522 Jy/beam ! Clean residual mean=0.000027 rms=0.001377 Jy/beam ! Combined flux in latest and established models = 0.158506 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 77 model components to the UV plane model. ! The established model now contains 90 components and 0.158506 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074849Jy sigma=1.078874 ! Fit after self-cal, rms=0.074816Jy sigma=1.078513 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.495 x 16.35 at -19.33 degrees (North through East) ! Clean map min=-0.0043089 max=0.11581 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.03859 ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 0.98 HN 0.92 KP 0.99 ! LA 0.91 MK 1.02 NL 0.90 OV 0.99 ! PT 1.04 SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.074816Jy sigma=1.078513 ! Fit after self-cal, rms=0.074403Jy sigma=1.076906 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074403Jy sigma=1.076906 ! Fit after self-cal, rms=0.074389Jy sigma=1.076712 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.509 mas, bmaj=16.28 mas, bpa=-19.26 degrees ! Estimated noise=1.18834 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00220055 Jy ! Component: 100 - total flux cleaned = 0.00307364 Jy ! Component: 150 - total flux cleaned = 0.00365148 Jy ! Component: 200 - total flux cleaned = 0.00408266 Jy ! Total flux subtracted in 200 components = 0.00408266 Jy ! Clean residual min=-0.003982 max=0.004508 Jy/beam ! Clean residual mean=0.000017 rms=0.001301 Jy/beam ! Combined flux in latest and established models = 0.162589 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 116 components and 0.162589 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074184Jy sigma=1.074444 ! Fit after self-cal, rms=0.074170Jy sigma=1.074204 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074170Jy sigma=1.074204 ! Fit after self-cal, rms=0.071106Jy sigma=1.024058 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00174655 Jy ! Component: 100 - total flux cleaned = 0.00198724 Jy ! Component: 150 - total flux cleaned = 0.00202644 Jy ! Component: 200 - total flux cleaned = 0.00202874 Jy ! Total flux subtracted in 200 components = 0.00202874 Jy ! Clean residual min=-0.004213 max=0.004363 Jy/beam ! Clean residual mean=0.000012 rms=0.001238 Jy/beam ! Combined flux in latest and established models = 0.164618 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 138 components and 0.164618 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070990Jy sigma=1.023083 ! Fit after self-cal, rms=0.070795Jy sigma=1.019721 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.509 x 16.28 at -19.26 degrees (North through East) ! Clean map min=-0.0042005 max=0.117 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070795Jy sigma=1.019721 ! Fit after self-cal, rms=0.069318Jy sigma=1.012032 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069318Jy sigma=1.012032 ! Fit after self-cal, rms=0.069335Jy sigma=1.011572 ! Inverting map and beam ! Estimated beam: bmin=3.488 mas, bmaj=16.35 mas, bpa=-19.2 degrees ! Estimated noise=1.16691 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00019145 Jy ! Component: 100 - total flux cleaned = -0.000198407 Jy ! Component: 150 - total flux cleaned = -0.000249007 Jy ! Component: 200 - total flux cleaned = -0.000284979 Jy ! Total flux subtracted in 200 components = -0.000284979 Jy ! Clean residual min=-0.004774 max=0.004137 Jy/beam ! Clean residual mean=0.000006 rms=0.001224 Jy/beam ! Combined flux in latest and established models = 0.164333 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 155 components and 0.164333 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069271Jy sigma=1.010420 ! Fit after self-cal, rms=0.069278Jy sigma=1.010332 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069278Jy sigma=1.010332 ! Fit after self-cal, rms=0.069222Jy sigma=1.012267 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069222Jy sigma=1.012267 ! Fit after self-cal, rms=0.069241Jy sigma=1.012178 ! Inverting map and beam ! Estimated beam: bmin=3.5 mas, bmaj=16.55 mas, bpa=-19.03 degrees ! Estimated noise=1.16221 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -7.92805e-05 Jy ! Component: 100 - total flux cleaned = -0.000213194 Jy ! Component: 150 - total flux cleaned = -0.00039877 Jy ! Component: 200 - total flux cleaned = -0.000497983 Jy ! Total flux subtracted in 200 components = -0.000497983 Jy ! Clean residual min=-0.004866 max=0.003978 Jy/beam ! Clean residual mean=0.000006 rms=0.001238 Jy/beam ! Combined flux in latest and established models = 0.163835 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 166 components and 0.163835 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069181Jy sigma=1.011211 ! Fit after self-cal, rms=0.069188Jy sigma=1.011188 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.594 mas, bmaj=17.48 mas, bpa=-13.71 degrees ! Estimated noise=1.40422 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000294762 Jy ! Component: 100 - total flux cleaned = -0.000323622 Jy ! Component: 150 - total flux cleaned = -0.000377029 Jy ! Component: 200 - total flux cleaned = -0.000423605 Jy ! Total flux subtracted in 200 components = -0.000423605 Jy ! Clean residual min=-0.005323 max=0.004714 Jy/beam ! Clean residual mean=0.000020 rms=0.001496 Jy/beam ! Combined flux in latest and established models = 0.163411 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 177 components and 0.163411 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069204Jy sigma=1.011143 ! Fit after self-cal, rms=0.069202Jy sigma=1.011128 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.819 mas, bmaj=13.71 mas, bpa=-19.11 degrees ! Estimated noise=1.65808 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.100243 Jy ! Component: 100 - total flux cleaned = 0.127127 Jy ! Component: 150 - total flux cleaned = 0.142162 Jy ! Component: 200 - total flux cleaned = 0.151351 Jy ! Total flux subtracted in 200 components = 0.151351 Jy ! Clean residual min=-0.006781 max=0.005855 Jy/beam ! Clean residual mean=0.000028 rms=0.001809 Jy/beam ! Combined flux in latest and established models = 0.151351 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 40 model components to the UV plane model. ! The established model now contains 40 components and 0.151351 Jy ! Inverting map and beam ! Estimated beam: bmin=3.5 mas, bmaj=16.55 mas, bpa=-19.03 degrees ! Estimated noise=1.16221 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00686347 Jy ! Component: 100 - total flux cleaned = 0.010144 Jy ! Component: 150 - total flux cleaned = 0.0110719 Jy ! Component: 200 - total flux cleaned = 0.0117468 Jy ! Total flux subtracted in 200 components = 0.0117468 Jy ! Clean residual min=-0.004959 max=0.003940 Jy/beam ! Clean residual mean=0.000011 rms=0.001264 Jy/beam ! Combined flux in latest and established models = 0.163097 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 76 components and 0.163097 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.594 mas, bmaj=17.48 mas, bpa=-13.71 degrees ! Estimated noise=1.40422 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000472359 Jy ! Component: 100 - total flux cleaned = 0.000422616 Jy ! Component: 150 - total flux cleaned = 0.000424038 Jy ! Component: 200 - total flux cleaned = 0.000463453 Jy ! Total flux subtracted in 200 components = 0.000463453 Jy ! Clean residual min=-0.005355 max=0.004720 Jy/beam ! Clean residual mean=0.000021 rms=0.001509 Jy/beam ! Combined flux in latest and established models = 0.163561 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 87 components and 0.163561 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.5 mas, bmaj=16.55 mas, bpa=-19.03 degrees ! Estimated noise=1.16221 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000287666 Jy ! Component: 100 - total flux cleaned = 0.000326395 Jy ! Component: 150 - total flux cleaned = 0.000325052 Jy ! Component: 200 - total flux cleaned = 0.000359976 Jy ! Total flux subtracted in 200 components = 0.000359976 Jy ! Clean residual min=-0.004843 max=0.004009 Jy/beam ! Clean residual mean=0.000006 rms=0.001240 Jy/beam ! Combined flux in latest and established models = 0.163921 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 101 components and 0.163921 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069215Jy sigma=1.011273 ! Fit after self-cal, rms=0.069207Jy sigma=1.011191 wmodel J0517-0520_S_2005_07_08_yyk\_map.mod ! Writing 101 model components to file: J0517-0520_S_2005_07_08_yyk_map.mod wobs J0517-0520_S_2005_07_08_yyk\_uvs.fits ! Writing UV FITS file: J0517-0520_S_2005_07_08_yyk_uvs.fits wwins J0517-0520_S_2005_07_08_yyk\_map.win ! wwins: Wrote 1 windows to J0517-0520_S_2005_07_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00119869 Jy ! Component: 100 - total flux cleaned = -0.000517481 Jy ! Component: 150 - total flux cleaned = 0.00011826 Jy ! Component: 200 - total flux cleaned = 0.000474172 Jy ! Component: 250 - total flux cleaned = 0.000813271 Jy ! Component: 300 - total flux cleaned = 0.000977866 Jy ! Component: 350 - total flux cleaned = 0.00108339 Jy ! Component: 400 - total flux cleaned = 0.00113526 Jy ! Component: 450 - total flux cleaned = 0.00123515 Jy ! Component: 500 - total flux cleaned = 0.00128397 Jy ! Component: 550 - total flux cleaned = 0.00128368 Jy ! Component: 600 - total flux cleaned = 0.00132971 Jy ! Component: 650 - total flux cleaned = 0.00151036 Jy ! Component: 700 - total flux cleaned = 0.00150985 Jy ! Component: 750 - total flux cleaned = 0.00159745 Jy ! Component: 800 - total flux cleaned = 0.00193727 Jy ! Component: 850 - total flux cleaned = 0.00193672 Jy ! Component: 900 - total flux cleaned = 0.00197796 Jy ! Component: 950 - total flux cleaned = 0.00205848 Jy ! Component: 1000 - total flux cleaned = 0.00217605 Jy ! Component: 1050 - total flux cleaned = 0.00217566 Jy ! Component: 1100 - total flux cleaned = 0.00232786 Jy ! Component: 1150 - total flux cleaned = 0.0024019 Jy ! Component: 1200 - total flux cleaned = 0.00254903 Jy ! Component: 1250 - total flux cleaned = 0.0027304 Jy ! Component: 1300 - total flux cleaned = 0.00287339 Jy ! Component: 1350 - total flux cleaned = 0.00312049 Jy ! Component: 1400 - total flux cleaned = 0.00318971 Jy ! Component: 1450 - total flux cleaned = 0.00343044 Jy ! Component: 1500 - total flux cleaned = 0.00353231 Jy ! Component: 1550 - total flux cleaned = 0.00376709 Jy ! Component: 1600 - total flux cleaned = 0.00389921 Jy ! Component: 1650 - total flux cleaned = 0.00396512 Jy ! Component: 1700 - total flux cleaned = 0.0042217 Jy ! Component: 1750 - total flux cleaned = 0.00434787 Jy ! Component: 1800 - total flux cleaned = 0.00447316 Jy ! Component: 1850 - total flux cleaned = 0.00465772 Jy ! Component: 1900 - total flux cleaned = 0.00477987 Jy ! Component: 1950 - total flux cleaned = 0.00492981 Jy ! Component: 2000 - total flux cleaned = 0.0050487 Jy ! Total flux subtracted in 2048 components = 0.00519619 Jy ! Clean residual min=-0.001466 max=0.001680 Jy/beam ! Clean residual mean=-0.000013 rms=0.000665 Jy/beam ! Combined flux in latest and established models = 0.169117 Jy keep ! Adding 150 model components to the UV plane model. ! The established model now contains 251 components and 0.169117 Jy ![Exited script file: muppet] wmap "J0517-0520_S_2005_07_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.5 x 16.55 at -19.03 degrees (North through East) ! Clean map min=-0.0032143 max=0.11392 Jy/beam ! Writing clean map to FITS file: J0517-0520_S_2005_07_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.113921 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000644262 device "J0517-0520_S_2005_07_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J0517-0520_S_2005_07_08_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.6966 1.6966 3.3932 6.7864 13.5728 27.1456 54.2912 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0019 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.113 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.5 x 16.55 at -19.03 degrees (North through East) ! Clean map min=-0.0032143 max=0.11392 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0517-0520_S_2005_07_08_yyk\_map.gif/gif" ! Attempting to open device: 'J0517-0520_S_2005_07_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0517-0520_S_2005_07_08_yyk_uvs.log closed on Fri Jan 20 09:57:18 2006