! Started logfile: J0513-0032_S_2005_07_20_yyk_uvs.log on Fri Jan 20 09:56:52 2006 obs J0513-0032_S_2005_07_20_yyk_uve.fits ! Reading UV FITS file: J0513-0032_S_2005_07_20_yyk_uve.fits ! AN table 1: 11 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.892929 visibilities/baseline/integration-bin. ! Found source: J0513-0032 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1527 lines of history. ! ! Reading 1768 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0513-0032_S_2005_07_20_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.162266 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.594 mas, bmaj=6.579 mas, bpa=-4.835 degrees ! Estimated noise=1.29718 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.10576 Jy ! Component: 100 - total flux cleaned = 0.140458 Jy ! Total flux subtracted in 100 components = 0.140458 Jy ! Clean residual min=-0.012458 max=0.029441 Jy/beam ! Clean residual mean=0.000086 rms=0.003551 Jy/beam ! Combined flux in latest and established models = 0.140458 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.140458 Jy ! ! Correcting IF 1. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.089674Jy sigma=1.412436 ! Fit after self-cal, rms=0.089000Jy sigma=1.403114 ! Inverting map and beam ! Estimated beam: bmin=2.595 mas, bmaj=6.58 mas, bpa=-4.847 degrees ! Estimated noise=1.29793 mJy/beam. ! Added new window around map position (-4.5, -4). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0298413 Jy ! Component: 100 - total flux cleaned = 0.0439177 Jy ! Total flux subtracted in 100 components = 0.0439177 Jy ! Clean residual min=-0.009291 max=0.011594 Jy/beam ! Clean residual mean=0.000045 rms=0.002462 Jy/beam ! Combined flux in latest and established models = 0.184375 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 38 components and 0.184375 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079596Jy sigma=1.196767 ! Fit after self-cal, rms=0.078539Jy sigma=1.175545 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.135 mas, bmaj=7.697 mas, bpa=-3.802 degrees ! Estimated noise=0.970668 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.014845 Jy ! Component: 100 - total flux cleaned = 0.0215352 Jy ! Component: 150 - total flux cleaned = 0.0250899 Jy ! Component: 200 - total flux cleaned = 0.0266272 Jy ! Total flux subtracted in 200 components = 0.0266272 Jy ! Clean residual min=-0.005349 max=0.006558 Jy/beam ! Clean residual mean=-0.000034 rms=0.001400 Jy/beam ! Combined flux in latest and established models = 0.211003 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 39 model components to the UV plane model. ! The established model now contains 72 components and 0.211003 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076603Jy sigma=1.132684 ! Fit after self-cal, rms=0.076484Jy sigma=1.130203 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.135 x 7.697 at -3.802 degrees (North through East) ! Clean map min=-0.0045215 max=0.12058 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.076484Jy sigma=1.130203 ! Fit after self-cal, rms=0.076484Jy sigma=1.130203 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076484Jy sigma=1.130203 ! Fit after self-cal, rms=0.076478Jy sigma=1.130100 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.135 mas, bmaj=7.697 mas, bpa=-3.802 degrees ! Estimated noise=0.970668 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00223719 Jy ! Component: 100 - total flux cleaned = 0.0022413 Jy ! Component: 150 - total flux cleaned = 0.00223638 Jy ! Component: 200 - total flux cleaned = 0.00237465 Jy ! Total flux subtracted in 200 components = 0.00237465 Jy ! Clean residual min=-0.005040 max=0.006072 Jy/beam ! Clean residual mean=-0.000042 rms=0.001336 Jy/beam ! Combined flux in latest and established models = 0.213377 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 91 components and 0.213377 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076333Jy sigma=1.127934 ! Fit after self-cal, rms=0.076312Jy sigma=1.127400 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076312Jy sigma=1.127400 ! Fit after self-cal, rms=0.072359Jy sigma=1.065199 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (29.5, -37). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00184578 Jy ! Component: 100 - total flux cleaned = 0.000863182 Jy ! Component: 150 - total flux cleaned = 0.000602735 Jy ! Component: 200 - total flux cleaned = 0.000493724 Jy ! Total flux subtracted in 200 components = 0.000493724 Jy ! Clean residual min=-0.004516 max=0.004580 Jy/beam ! Clean residual mean=-0.000046 rms=0.001174 Jy/beam ! Combined flux in latest and established models = 0.213871 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 108 components and 0.213871 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071789Jy sigma=1.051742 ! Fit after self-cal, rms=0.071508Jy sigma=1.045796 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.135 x 7.697 at -3.802 degrees (North through East) ! Clean map min=-0.0042731 max=0.11996 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071508Jy sigma=1.045796 ! Fit after self-cal, rms=0.070246Jy sigma=1.025752 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070246Jy sigma=1.025752 ! Fit after self-cal, rms=0.070237Jy sigma=1.024715 ! Inverting map and beam ! Estimated beam: bmin=3.1 mas, bmaj=7.622 mas, bpa=-3.045 degrees ! Estimated noise=0.965855 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00168861 Jy ! Component: 100 - total flux cleaned = 0.00214312 Jy ! Component: 150 - total flux cleaned = 0.00242885 Jy ! Component: 200 - total flux cleaned = 0.00259735 Jy ! Total flux subtracted in 200 components = 0.00259735 Jy ! Clean residual min=-0.003979 max=0.004561 Jy/beam ! Clean residual mean=-0.000009 rms=0.001069 Jy/beam ! Combined flux in latest and established models = 0.216468 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 130 components and 0.216468 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069959Jy sigma=1.019499 ! Fit after self-cal, rms=0.069950Jy sigma=1.018818 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069950Jy sigma=1.018818 ! Fit after self-cal, rms=0.068818Jy sigma=1.008771 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068818Jy sigma=1.008771 ! Fit after self-cal, rms=0.068800Jy sigma=1.008549 ! Inverting map and beam ! Estimated beam: bmin=3.074 mas, bmaj=7.503 mas, bpa=-1.608 degrees ! Estimated noise=0.951217 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00094735 Jy ! Component: 100 - total flux cleaned = -0.00119366 Jy ! Component: 150 - total flux cleaned = -0.00141416 Jy ! Component: 200 - total flux cleaned = -0.00154502 Jy ! Total flux subtracted in 200 components = -0.00154502 Jy ! Clean residual min=-0.003650 max=0.003951 Jy/beam ! Clean residual mean=-0.000015 rms=0.001014 Jy/beam ! Combined flux in latest and established models = 0.214923 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 34 model components to the UV plane model. ! The established model now contains 150 components and 0.214923 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068630Jy sigma=1.005525 ! Fit after self-cal, rms=0.068618Jy sigma=1.005292 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.689 mas, bmaj=12.23 mas, bpa=1.346 degrees ! Estimated noise=1.23982 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000450978 Jy ! Component: 100 - total flux cleaned = -0.000631957 Jy ! Component: 150 - total flux cleaned = -0.000790836 Jy ! Component: 200 - total flux cleaned = -0.000927526 Jy ! Total flux subtracted in 200 components = -0.000927526 Jy ! Clean residual min=-0.004008 max=0.003579 Jy/beam ! Clean residual mean=-0.000044 rms=0.001178 Jy/beam ! Combined flux in latest and established models = 0.213996 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 168 components and 0.213996 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068642Jy sigma=1.004912 ! Fit after self-cal, rms=0.068634Jy sigma=1.004723 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.588 mas, bmaj=6.51 mas, bpa=-3.894 degrees ! Estimated noise=1.26055 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.109144 Jy ! Component: 100 - total flux cleaned = 0.15151 Jy ! Component: 150 - total flux cleaned = 0.173072 Jy ! Component: 200 - total flux cleaned = 0.186956 Jy ! Total flux subtracted in 200 components = 0.186956 Jy ! Clean residual min=-0.006628 max=0.006739 Jy/beam ! Clean residual mean=0.000042 rms=0.002027 Jy/beam ! Combined flux in latest and established models = 0.186956 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 42 model components to the UV plane model. ! The established model now contains 42 components and 0.186956 Jy ! Inverting map and beam ! Estimated beam: bmin=3.074 mas, bmaj=7.503 mas, bpa=-1.608 degrees ! Estimated noise=0.951217 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0146228 Jy ! Component: 100 - total flux cleaned = 0.0219274 Jy ! Component: 150 - total flux cleaned = 0.0238579 Jy ! Component: 200 - total flux cleaned = 0.0243863 Jy ! Total flux subtracted in 200 components = 0.0243863 Jy ! Clean residual min=-0.004134 max=0.004154 Jy/beam ! Clean residual mean=-0.000001 rms=0.001150 Jy/beam ! Combined flux in latest and established models = 0.211342 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 92 components and 0.211342 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.689 mas, bmaj=12.23 mas, bpa=1.346 degrees ! Estimated noise=1.23982 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00280891 Jy ! Component: 100 - total flux cleaned = 0.00291912 Jy ! Component: 150 - total flux cleaned = 0.00282874 Jy ! Component: 200 - total flux cleaned = 0.00290289 Jy ! Total flux subtracted in 200 components = 0.00290289 Jy ! Clean residual min=-0.004262 max=0.003701 Jy/beam ! Clean residual mean=-0.000040 rms=0.001216 Jy/beam ! Combined flux in latest and established models = 0.214245 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 122 components and 0.214245 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.074 mas, bmaj=7.503 mas, bpa=-1.608 degrees ! Estimated noise=0.951217 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00010095 Jy ! Component: 100 - total flux cleaned = -0.000421582 Jy ! Component: 150 - total flux cleaned = -0.000325705 Jy ! Component: 200 - total flux cleaned = -0.000158081 Jy ! Total flux subtracted in 200 components = -0.000158081 Jy ! Clean residual min=-0.003967 max=0.003912 Jy/beam ! Clean residual mean=-0.000014 rms=0.001045 Jy/beam ! Combined flux in latest and established models = 0.214087 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 146 components and 0.214087 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068675Jy sigma=1.007542 ! Fit after self-cal, rms=0.068646Jy sigma=1.006696 wmodel J0513-0032_S_2005_07_20_yyk\_map.mod ! Writing 146 model components to file: J0513-0032_S_2005_07_20_yyk_map.mod wobs J0513-0032_S_2005_07_20_yyk\_uvs.fits ! Writing UV FITS file: J0513-0032_S_2005_07_20_yyk_uvs.fits wwins J0513-0032_S_2005_07_20_yyk\_map.win ! wwins: Wrote 3 windows to J0513-0032_S_2005_07_20_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000225402 Jy ! Component: 100 - total flux cleaned = 0.000285526 Jy ! Component: 150 - total flux cleaned = 0.000594652 Jy ! Component: 200 - total flux cleaned = 0.000772901 Jy ! Component: 250 - total flux cleaned = 0.000772417 Jy ! Component: 300 - total flux cleaned = 0.000989948 Jy ! Component: 350 - total flux cleaned = 0.00109757 Jy ! Component: 400 - total flux cleaned = 0.0013043 Jy ! Component: 450 - total flux cleaned = 0.00150253 Jy ! Component: 500 - total flux cleaned = 0.00140576 Jy ! Component: 550 - total flux cleaned = 0.00140653 Jy ! Component: 600 - total flux cleaned = 0.00136089 Jy ! Component: 650 - total flux cleaned = 0.00136052 Jy ! Component: 700 - total flux cleaned = 0.00136098 Jy ! Component: 750 - total flux cleaned = 0.00153259 Jy ! Component: 800 - total flux cleaned = 0.00153179 Jy ! Component: 850 - total flux cleaned = 0.00165556 Jy ! Component: 900 - total flux cleaned = 0.00165596 Jy ! Component: 950 - total flux cleaned = 0.001696 Jy ! Component: 1000 - total flux cleaned = 0.00165662 Jy ! Component: 1050 - total flux cleaned = 0.0016183 Jy ! Component: 1100 - total flux cleaned = 0.0015039 Jy ! Component: 1150 - total flux cleaned = 0.00131664 Jy ! Component: 1200 - total flux cleaned = 0.00120535 Jy ! Component: 1250 - total flux cleaned = 0.00109554 Jy ! Component: 1300 - total flux cleaned = 0.000951588 Jy ! Component: 1350 - total flux cleaned = 0.000845212 Jy ! Component: 1400 - total flux cleaned = 0.000775838 Jy ! Component: 1450 - total flux cleaned = 0.00063747 Jy ! Component: 1500 - total flux cleaned = 0.000535517 Jy ! Component: 1550 - total flux cleaned = 0.000502447 Jy ! Component: 1600 - total flux cleaned = 0.000535918 Jy ! Component: 1650 - total flux cleaned = 0.00047003 Jy ! Component: 1700 - total flux cleaned = 0.000470023 Jy ! Component: 1750 - total flux cleaned = 0.000244938 Jy ! Component: 1800 - total flux cleaned = 0.000340746 Jy ! Component: 1850 - total flux cleaned = 0.000246204 Jy ! Component: 1900 - total flux cleaned = 0.000214776 Jy ! Component: 1950 - total flux cleaned = 0.000122009 Jy ! Component: 2000 - total flux cleaned = 6.06519e-05 Jy ! Total flux subtracted in 2048 components = -9.01118e-05 Jy ! Clean residual min=-0.002230 max=0.002098 Jy/beam ! Clean residual mean=0.000003 rms=0.000618 Jy/beam ! Combined flux in latest and established models = 0.213997 Jy keep ! Adding 140 model components to the UV plane model. ! The established model now contains 286 components and 0.213997 Jy ![Exited script file: muppet] wmap "J0513-0032_S_2005_07_20_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.074 x 7.503 at -1.608 degrees (North through East) ! Clean map min=-0.0048232 max=0.11821 Jy/beam ! Writing clean map to FITS file: J0513-0032_S_2005_07_20_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.118208 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000618961 device "J0513-0032_S_2005_07_20_yyk\_map.eps/VPS" ! Attempting to open device: 'J0513-0032_S_2005_07_20_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.57086 1.57086 3.14173 6.28346 12.5669 25.1338 50.2677 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.118 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.074 x 7.503 at -1.608 degrees (North through East) ! Clean map min=-0.0048232 max=0.11821 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0513-0032_S_2005_07_20_yyk\_map.gif/gif" ! Attempting to open device: 'J0513-0032_S_2005_07_20_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0513-0032_S_2005_07_20_yyk_uvs.log closed on Fri Jan 20 09:56:57 2006