! Started logfile: J0505-1615_S_2005_07_08_yyk_uvs.log on Fri Jan 20 09:56:17 2006 obs J0505-1615_S_2005_07_08_yyk_uve.fits ! Reading UV FITS file: J0505-1615_S_2005_07_08_yyk_uve.fits ! AN table 1: 11 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.824242 visibilities/baseline/integration-bin. ! Found source: J0505-1615 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1412 lines of history. ! ! Reading 1632 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0505-1615_S_2005_07_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.16982 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.678 mas, bmaj=6.85 mas, bpa=-9.947 degrees ! Estimated noise=1.50646 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.127794 Jy ! Component: 100 - total flux cleaned = 0.152012 Jy ! Total flux subtracted in 100 components = 0.152012 Jy ! Clean residual min=-0.006480 max=0.006487 Jy/beam ! Clean residual mean=-0.000010 rms=0.001954 Jy/beam ! Combined flux in latest and established models = 0.152012 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.152012 Jy ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.071031Jy sigma=1.080901 ! Fit after self-cal, rms=0.070870Jy sigma=1.077811 ! Inverting map and beam ! Estimated beam: bmin=2.678 mas, bmaj=6.85 mas, bpa=-9.947 degrees ! Estimated noise=1.50646 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.343 mas, bmaj=8.744 mas, bpa=-10.49 degrees ! Estimated noise=1.05364 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00781883 Jy ! Component: 100 - total flux cleaned = 0.00975028 Jy ! Component: 150 - total flux cleaned = 0.00988774 Jy ! Component: 200 - total flux cleaned = 0.00984183 Jy ! Total flux subtracted in 200 components = 0.00984182 Jy ! Clean residual min=-0.003972 max=0.004273 Jy/beam ! Clean residual mean=-0.000044 rms=0.001169 Jy/beam ! Combined flux in latest and established models = 0.161854 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 41 components and 0.161854 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069819Jy sigma=1.067380 ! Fit after self-cal, rms=0.069819Jy sigma=1.067333 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.343 x 8.744 at -10.49 degrees (North through East) ! Clean map min=-0.0038312 max=0.14732 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.03148 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.01 HN 0.95 KP 0.97 ! LA 1.08 MK 0.90 NL 0.90 OV 0.99 ! PT 1.08 SC 0.87 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.986122 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.98 HN 1.01 KP 1.04 ! LA 1.07 MK 0.95 NL 0.97 OV 1.04 ! PT 1.05 SC 1.01 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.069819Jy sigma=1.067333 ! Fit after self-cal, rms=0.069181Jy sigma=1.060737 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069181Jy sigma=1.060737 ! Fit after self-cal, rms=0.069177Jy sigma=1.060717 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.249 mas, bmaj=8.518 mas, bpa=-10.58 degrees ! Estimated noise=1.06113 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00400997 Jy ! Component: 100 - total flux cleaned = 0.00539951 Jy ! Component: 150 - total flux cleaned = 0.00564739 Jy ! Component: 200 - total flux cleaned = 0.00585674 Jy ! Total flux subtracted in 200 components = 0.00585674 Jy ! Clean residual min=-0.004398 max=0.004013 Jy/beam ! Clean residual mean=-0.000013 rms=0.001118 Jy/beam ! Combined flux in latest and established models = 0.167711 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 62 components and 0.167711 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068850Jy sigma=1.057864 ! Fit after self-cal, rms=0.068851Jy sigma=1.057839 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068851Jy sigma=1.057839 ! Fit after self-cal, rms=0.067053Jy sigma=1.023697 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000817237 Jy ! Component: 100 - total flux cleaned = 0.000955238 Jy ! Component: 150 - total flux cleaned = 0.00104335 Jy ! Component: 200 - total flux cleaned = 0.00106825 Jy ! Total flux subtracted in 200 components = 0.00106825 Jy ! Clean residual min=-0.004431 max=0.003916 Jy/beam ! Clean residual mean=-0.000013 rms=0.001120 Jy/beam ! Combined flux in latest and established models = 0.168779 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 70 components and 0.168779 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066966Jy sigma=1.023270 ! Fit after self-cal, rms=0.066924Jy sigma=1.021471 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.249 x 8.518 at -10.58 degrees (North through East) ! Clean map min=-0.0042623 max=0.14789 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066924Jy sigma=1.021471 ! Fit after self-cal, rms=0.065969Jy sigma=1.007129 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065969Jy sigma=1.007129 ! Fit after self-cal, rms=0.065982Jy sigma=1.006964 ! Inverting map and beam ! Estimated beam: bmin=3.207 mas, bmaj=8.356 mas, bpa=-10.28 degrees ! Estimated noise=1.06091 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00186193 Jy ! Component: 100 - total flux cleaned = 0.00221484 Jy ! Component: 150 - total flux cleaned = 0.00237431 Jy ! Component: 200 - total flux cleaned = 0.00243177 Jy ! Total flux subtracted in 200 components = 0.00243177 Jy ! Clean residual min=-0.004289 max=0.004053 Jy/beam ! Clean residual mean=-0.000016 rms=0.001088 Jy/beam ! Combined flux in latest and established models = 0.171211 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 71 components and 0.171211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065863Jy sigma=1.006178 ! Fit after self-cal, rms=0.065868Jy sigma=1.006162 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065868Jy sigma=1.006162 ! Fit after self-cal, rms=0.066592Jy sigma=0.997032 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066592Jy sigma=0.997032 ! Fit after self-cal, rms=0.066598Jy sigma=0.996970 ! Inverting map and beam ! Estimated beam: bmin=3.21 mas, bmaj=8.274 mas, bpa=-9.871 degrees ! Estimated noise=1.07497 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00248261 Jy ! Component: 100 - total flux cleaned = 0.00292805 Jy ! Component: 150 - total flux cleaned = 0.00298455 Jy ! Component: 200 - total flux cleaned = 0.00300917 Jy ! Total flux subtracted in 200 components = 0.00300917 Jy ! Clean residual min=-0.003621 max=0.003889 Jy/beam ! Clean residual mean=-0.000029 rms=0.001090 Jy/beam ! Combined flux in latest and established models = 0.17422 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 81 components and 0.17422 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066411Jy sigma=0.995798 ! Fit after self-cal, rms=0.066413Jy sigma=0.995789 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.851 mas, bmaj=16.28 mas, bpa=-7.387 degrees ! Estimated noise=1.37071 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00027275 Jy ! Component: 100 - total flux cleaned = 0.00023469 Jy ! Component: 150 - total flux cleaned = 0.000230839 Jy ! Component: 200 - total flux cleaned = 0.00020765 Jy ! Total flux subtracted in 200 components = 0.00020765 Jy ! Clean residual min=-0.004895 max=0.003867 Jy/beam ! Clean residual mean=-0.000051 rms=0.001288 Jy/beam ! Combined flux in latest and established models = 0.174428 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 6 model components to the UV plane model. ! The established model now contains 84 components and 0.174428 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066398Jy sigma=0.995911 ! Fit after self-cal, rms=0.066392Jy sigma=0.995840 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.627 mas, bmaj=6.717 mas, bpa=-9.711 degrees ! Estimated noise=1.50152 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.129031 Jy ! Component: 100 - total flux cleaned = 0.155399 Jy ! Component: 150 - total flux cleaned = 0.165889 Jy ! Component: 200 - total flux cleaned = 0.171264 Jy ! Total flux subtracted in 200 components = 0.171264 Jy ! Clean residual min=-0.005681 max=0.005934 Jy/beam ! Clean residual mean=-0.000009 rms=0.001686 Jy/beam ! Combined flux in latest and established models = 0.171264 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.171264 Jy ! Inverting map and beam ! Estimated beam: bmin=3.21 mas, bmaj=8.274 mas, bpa=-9.871 degrees ! Estimated noise=1.07497 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0024537 Jy ! Component: 100 - total flux cleaned = 0.0027252 Jy ! Component: 150 - total flux cleaned = 0.00281943 Jy ! Component: 200 - total flux cleaned = 0.00285941 Jy ! Total flux subtracted in 200 components = 0.00285941 Jy ! Clean residual min=-0.003739 max=0.003916 Jy/beam ! Clean residual mean=-0.000029 rms=0.001098 Jy/beam ! Combined flux in latest and established models = 0.174124 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 39 components and 0.174124 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.851 mas, bmaj=16.28 mas, bpa=-7.387 degrees ! Estimated noise=1.37071 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000284544 Jy ! Component: 100 - total flux cleaned = 0.00023306 Jy ! Component: 150 - total flux cleaned = 0.00022797 Jy ! Component: 200 - total flux cleaned = 0.000224756 Jy ! Total flux subtracted in 200 components = 0.000224756 Jy ! Clean residual min=-0.004868 max=0.003841 Jy/beam ! Clean residual mean=-0.000052 rms=0.001288 Jy/beam ! Combined flux in latest and established models = 0.174349 Jy ! Adding 4 model components to the UV plane model. ! The established model now contains 43 components and 0.174349 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.21 mas, bmaj=8.274 mas, bpa=-9.871 degrees ! Estimated noise=1.07497 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -7.92017e-05 Jy ! Component: 100 - total flux cleaned = -7.85695e-05 Jy ! Component: 150 - total flux cleaned = -7.88049e-05 Jy ! Component: 200 - total flux cleaned = -7.83072e-05 Jy ! Total flux subtracted in 200 components = -7.83072e-05 Jy ! Clean residual min=-0.003671 max=0.003990 Jy/beam ! Clean residual mean=-0.000029 rms=0.001091 Jy/beam ! Combined flux in latest and established models = 0.17427 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 47 components and 0.17427 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066391Jy sigma=0.995735 ! Fit after self-cal, rms=0.066391Jy sigma=0.995645 wmodel J0505-1615_S_2005_07_08_yyk\_map.mod ! Writing 47 model components to file: J0505-1615_S_2005_07_08_yyk_map.mod wobs J0505-1615_S_2005_07_08_yyk\_uvs.fits ! Writing UV FITS file: J0505-1615_S_2005_07_08_yyk_uvs.fits wwins J0505-1615_S_2005_07_08_yyk\_map.win ! wwins: Wrote 1 windows to J0505-1615_S_2005_07_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110909 Jy ! Component: 100 - total flux cleaned = 0.00156733 Jy ! Component: 150 - total flux cleaned = 0.00205851 Jy ! Component: 200 - total flux cleaned = 0.00235279 Jy ! Component: 250 - total flux cleaned = 0.00291973 Jy ! Component: 300 - total flux cleaned = 0.00324831 Jy ! Component: 350 - total flux cleaned = 0.00372643 Jy ! Component: 400 - total flux cleaned = 0.00398307 Jy ! Component: 450 - total flux cleaned = 0.00403372 Jy ! Component: 500 - total flux cleaned = 0.0042773 Jy ! Component: 550 - total flux cleaned = 0.00437149 Jy ! Component: 600 - total flux cleaned = 0.00446508 Jy ! Component: 650 - total flux cleaned = 0.00460195 Jy ! Component: 700 - total flux cleaned = 0.00460191 Jy ! Component: 750 - total flux cleaned = 0.00451465 Jy ! Component: 800 - total flux cleaned = 0.00447248 Jy ! Component: 850 - total flux cleaned = 0.00451451 Jy ! Component: 900 - total flux cleaned = 0.00443161 Jy ! Component: 950 - total flux cleaned = 0.00434974 Jy ! Component: 1000 - total flux cleaned = 0.00430975 Jy ! Component: 1050 - total flux cleaned = 0.00430952 Jy ! Component: 1100 - total flux cleaned = 0.00446375 Jy ! Component: 1150 - total flux cleaned = 0.00438731 Jy ! Component: 1200 - total flux cleaned = 0.00453752 Jy ! Component: 1250 - total flux cleaned = 0.00446365 Jy ! Component: 1300 - total flux cleaned = 0.0045002 Jy ! Component: 1350 - total flux cleaned = 0.00453618 Jy ! Component: 1400 - total flux cleaned = 0.00453623 Jy ! Component: 1450 - total flux cleaned = 0.00467499 Jy ! Component: 1500 - total flux cleaned = 0.00463973 Jy ! Component: 1550 - total flux cleaned = 0.00470716 Jy ! Component: 1600 - total flux cleaned = 0.00470655 Jy ! Component: 1650 - total flux cleaned = 0.00470689 Jy ! Component: 1700 - total flux cleaned = 0.00480465 Jy ! Component: 1750 - total flux cleaned = 0.00490071 Jy ! Component: 1800 - total flux cleaned = 0.00496374 Jy ! Component: 1850 - total flux cleaned = 0.0049326 Jy ! Component: 1900 - total flux cleaned = 0.00514881 Jy ! Component: 1950 - total flux cleaned = 0.00508765 Jy ! Component: 2000 - total flux cleaned = 0.00511813 Jy ! Total flux subtracted in 2048 components = 0.00514835 Jy ! Clean residual min=-0.002203 max=0.002073 Jy/beam ! Clean residual mean=-0.000018 rms=0.000619 Jy/beam ! Combined flux in latest and established models = 0.179419 Jy keep ! Adding 137 model components to the UV plane model. ! The established model now contains 184 components and 0.179419 Jy ![Exited script file: muppet] wmap "J0505-1615_S_2005_07_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.21 x 8.274 at -9.871 degrees (North through East) ! Clean map min=-0.0028023 max=0.14829 Jy/beam ! Writing clean map to FITS file: J0505-1615_S_2005_07_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.14829 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00061847 device "J0505-1615_S_2005_07_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J0505-1615_S_2005_07_08_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.2512 1.2512 2.50241 5.00482 10.0096 20.0193 40.0385 80.077 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.148 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.21 x 8.274 at -9.871 degrees (North through East) ! Clean map min=-0.0028023 max=0.14829 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0505-1615_S_2005_07_08_yyk\_map.gif/gif" ! Attempting to open device: 'J0505-1615_S_2005_07_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0505-1615_S_2005_07_08_yyk_uvs.log closed on Fri Jan 20 09:56:21 2006