! Started logfile: J0457-1819_S_2005_07_09_yyk_uvs.log on Fri Jan 20 09:55:59 2006 obs J0457-1819_S_2005_07_09_yyk_uve.fits ! Reading UV FITS file: J0457-1819_S_2005_07_09_yyk_uve.fits ! AN table 1: 12 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.905556 visibilities/baseline/integration-bin. ! Found source: J0457-1819 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1602 lines of history. ! ! Reading 1956 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0457-1819_S_2005_07_09_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.130127 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.444 mas, bmaj=6.484 mas, bpa=-1.95 degrees ! Estimated noise=1.43809 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0847018 Jy ! Component: 100 - total flux cleaned = 0.100342 Jy ! Total flux subtracted in 100 components = 0.100342 Jy ! Clean residual min=-0.006255 max=0.006989 Jy/beam ! Clean residual mean=0.000038 rms=0.001715 Jy/beam ! Combined flux in latest and established models = 0.100342 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.100342 Jy ! ! Correcting IF 1. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.085967Jy sigma=1.107708 ! Fit after self-cal, rms=0.085495Jy sigma=1.101124 ! Inverting map and beam ! Estimated beam: bmin=2.444 mas, bmaj=6.484 mas, bpa=-1.95 degrees ! Estimated noise=1.43809 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.196 mas, bmaj=8.036 mas, bpa=-0.6827 degrees ! Estimated noise=1.01488 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00511249 Jy ! Component: 100 - total flux cleaned = 0.006212 Jy ! Component: 150 - total flux cleaned = 0.00642475 Jy ! Component: 200 - total flux cleaned = 0.00638031 Jy ! Total flux subtracted in 200 components = 0.00638031 Jy ! Clean residual min=-0.004275 max=0.005208 Jy/beam ! Clean residual mean=0.000058 rms=0.001351 Jy/beam ! Combined flux in latest and established models = 0.106723 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 36 components and 0.106723 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085407Jy sigma=1.096798 ! Fit after self-cal, rms=0.085405Jy sigma=1.096747 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.196 x 8.036 at -0.6827 degrees (North through East) ! Clean map min=-0.0042102 max=0.099659 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.085405Jy sigma=1.096747 ! Fit after self-cal, rms=0.085405Jy sigma=1.096747 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085405Jy sigma=1.096747 ! Fit after self-cal, rms=0.085405Jy sigma=1.096748 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.196 mas, bmaj=8.036 mas, bpa=-0.6827 degrees ! Estimated noise=1.01488 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -6.38111e-05 Jy ! Component: 100 - total flux cleaned = -2.27524e-05 Jy ! Component: 150 - total flux cleaned = -2.22287e-05 Jy ! Component: 200 - total flux cleaned = -2.41873e-05 Jy ! Total flux subtracted in 200 components = -2.41873e-05 Jy ! Clean residual min=-0.004233 max=0.005215 Jy/beam ! Clean residual mean=0.000058 rms=0.001345 Jy/beam ! Combined flux in latest and established models = 0.106699 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 38 components and 0.106699 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085369Jy sigma=1.096274 ! Fit after self-cal, rms=0.085366Jy sigma=1.096244 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085366Jy sigma=1.096244 ! Fit after self-cal, rms=0.078428Jy sigma=1.020533 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00287818 Jy ! Component: 100 - total flux cleaned = 0.00297215 Jy ! Component: 150 - total flux cleaned = 0.00300795 Jy ! Component: 200 - total flux cleaned = 0.00306867 Jy ! Total flux subtracted in 200 components = 0.00306867 Jy ! Clean residual min=-0.003936 max=0.004876 Jy/beam ! Clean residual mean=0.000028 rms=0.001331 Jy/beam ! Combined flux in latest and established models = 0.109767 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 40 components and 0.109767 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078354Jy sigma=1.018744 ! Fit after self-cal, rms=0.077861Jy sigma=1.013298 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.196 x 8.036 at -0.6827 degrees (North through East) ! Clean map min=-0.0038843 max=0.10292 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077861Jy sigma=1.013298 ! Fit after self-cal, rms=0.076139Jy sigma=1.006445 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076139Jy sigma=1.006445 ! Fit after self-cal, rms=0.076128Jy sigma=1.005753 ! Inverting map and beam ! Estimated beam: bmin=3.134 mas, bmaj=7.882 mas, bpa=-1.064 degrees ! Estimated noise=0.993171 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000399837 Jy ! Component: 100 - total flux cleaned = -0.000255503 Jy ! Component: 150 - total flux cleaned = -0.000167727 Jy ! Component: 200 - total flux cleaned = -8.94594e-05 Jy ! Total flux subtracted in 200 components = -8.94594e-05 Jy ! Clean residual min=-0.003813 max=0.004512 Jy/beam ! Clean residual mean=0.000038 rms=0.001290 Jy/beam ! Combined flux in latest and established models = 0.109678 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 44 components and 0.109678 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076074Jy sigma=1.005213 ! Fit after self-cal, rms=0.076086Jy sigma=1.005111 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076086Jy sigma=1.005111 ! Fit after self-cal, rms=0.076052Jy sigma=1.002290 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076052Jy sigma=1.002290 ! Fit after self-cal, rms=0.076056Jy sigma=1.002212 ! Inverting map and beam ! Estimated beam: bmin=3.072 mas, bmaj=7.834 mas, bpa=-1.609 degrees ! Estimated noise=0.988847 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000821993 Jy ! Component: 100 - total flux cleaned = 0.000983443 Jy ! Component: 150 - total flux cleaned = 0.00104188 Jy ! Component: 200 - total flux cleaned = 0.00104057 Jy ! Total flux subtracted in 200 components = 0.00104057 Jy ! Clean residual min=-0.003704 max=0.004480 Jy/beam ! Clean residual mean=0.000031 rms=0.001271 Jy/beam ! Combined flux in latest and established models = 0.110718 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 47 components and 0.110718 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075983Jy sigma=1.001585 ! Fit after self-cal, rms=0.075982Jy sigma=1.001562 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.896 mas, bmaj=16.08 mas, bpa=4.01 degrees ! Estimated noise=1.28207 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000413931 Jy ! Component: 100 - total flux cleaned = 0.000475705 Jy ! Component: 150 - total flux cleaned = 0.000577883 Jy ! Component: 200 - total flux cleaned = 0.000666534 Jy ! Total flux subtracted in 200 components = 0.000666534 Jy ! Clean residual min=-0.005191 max=0.006635 Jy/beam ! Clean residual mean=0.000068 rms=0.001793 Jy/beam ! Combined flux in latest and established models = 0.111385 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 51 components and 0.111385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076074Jy sigma=1.002486 ! Fit after self-cal, rms=0.076073Jy sigma=1.002448 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.41 mas, bmaj=6.46 mas, bpa=-2.264 degrees ! Estimated noise=1.38355 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0859728 Jy ! Component: 100 - total flux cleaned = 0.101911 Jy ! Component: 150 - total flux cleaned = 0.10824 Jy ! Component: 200 - total flux cleaned = 0.111678 Jy ! Total flux subtracted in 200 components = 0.111678 Jy ! Clean residual min=-0.005412 max=0.005906 Jy/beam ! Clean residual mean=0.000018 rms=0.001532 Jy/beam ! Combined flux in latest and established models = 0.111678 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.111678 Jy ! Inverting map and beam ! Estimated beam: bmin=3.072 mas, bmaj=7.834 mas, bpa=-1.609 degrees ! Estimated noise=0.988847 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00065473 Jy ! Component: 100 - total flux cleaned = -0.000967346 Jy ! Component: 150 - total flux cleaned = -0.00101403 Jy ! Component: 200 - total flux cleaned = -0.00105621 Jy ! Total flux subtracted in 200 components = -0.00105621 Jy ! Clean residual min=-0.003811 max=0.004712 Jy/beam ! Clean residual mean=0.000031 rms=0.001288 Jy/beam ! Combined flux in latest and established models = 0.110622 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 41 components and 0.110622 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.896 mas, bmaj=16.08 mas, bpa=4.01 degrees ! Estimated noise=1.28207 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000558969 Jy ! Component: 100 - total flux cleaned = 0.000695261 Jy ! Component: 150 - total flux cleaned = 0.00075468 Jy ! Component: 200 - total flux cleaned = 0.000859836 Jy ! Total flux subtracted in 200 components = 0.000859836 Jy ! Clean residual min=-0.005197 max=0.006651 Jy/beam ! Clean residual mean=0.000068 rms=0.001802 Jy/beam ! Combined flux in latest and established models = 0.111482 Jy ! Adding 5 model components to the UV plane model. ! The established model now contains 45 components and 0.111482 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.072 mas, bmaj=7.834 mas, bpa=-1.609 degrees ! Estimated noise=0.988847 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000443865 Jy ! Component: 100 - total flux cleaned = -0.000520509 Jy ! Component: 150 - total flux cleaned = -0.000479015 Jy ! Component: 200 - total flux cleaned = -0.000445308 Jy ! Total flux subtracted in 200 components = -0.000445308 Jy ! Clean residual min=-0.003871 max=0.004572 Jy/beam ! Clean residual mean=0.000031 rms=0.001273 Jy/beam ! Combined flux in latest and established models = 0.111037 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 62 components and 0.111037 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075977Jy sigma=1.001747 ! Fit after self-cal, rms=0.075964Jy sigma=1.001664 wmodel J0457-1819_S_2005_07_09_yyk\_map.mod ! Writing 62 model components to file: J0457-1819_S_2005_07_09_yyk_map.mod wobs J0457-1819_S_2005_07_09_yyk\_uvs.fits ! Writing UV FITS file: J0457-1819_S_2005_07_09_yyk_uvs.fits wwins J0457-1819_S_2005_07_09_yyk\_map.win ! wwins: Wrote 1 windows to J0457-1819_S_2005_07_09_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00208264 Jy ! Component: 100 - total flux cleaned = 0.00364337 Jy ! Component: 150 - total flux cleaned = 0.00460399 Jy ! Component: 200 - total flux cleaned = 0.00564108 Jy ! Component: 250 - total flux cleaned = 0.00663109 Jy ! Component: 300 - total flux cleaned = 0.00758728 Jy ! Component: 350 - total flux cleaned = 0.00805109 Jy ! Component: 400 - total flux cleaned = 0.0082764 Jy ! Component: 450 - total flux cleaned = 0.00844157 Jy ! Component: 500 - total flux cleaned = 0.00854869 Jy ! Component: 550 - total flux cleaned = 0.00870771 Jy ! Component: 600 - total flux cleaned = 0.00886231 Jy ! Component: 650 - total flux cleaned = 0.00891306 Jy ! Component: 700 - total flux cleaned = 0.00906294 Jy ! Component: 750 - total flux cleaned = 0.00906426 Jy ! Component: 800 - total flux cleaned = 0.00925802 Jy ! Component: 850 - total flux cleaned = 0.00930603 Jy ! Component: 900 - total flux cleaned = 0.00958602 Jy ! Component: 950 - total flux cleaned = 0.00953906 Jy ! Component: 1000 - total flux cleaned = 0.0095385 Jy ! Component: 1050 - total flux cleaned = 0.00967177 Jy ! Component: 1100 - total flux cleaned = 0.00984624 Jy ! Component: 1150 - total flux cleaned = 0.00967273 Jy ! Component: 1200 - total flux cleaned = 0.00988681 Jy ! Component: 1250 - total flux cleaned = 0.0100549 Jy ! Component: 1300 - total flux cleaned = 0.0100547 Jy ! Component: 1350 - total flux cleaned = 0.0102594 Jy ! Component: 1400 - total flux cleaned = 0.0103801 Jy ! Component: 1450 - total flux cleaned = 0.0105789 Jy ! Component: 1500 - total flux cleaned = 0.0107356 Jy ! Component: 1550 - total flux cleaned = 0.0108125 Jy ! Component: 1600 - total flux cleaned = 0.010889 Jy ! Component: 1650 - total flux cleaned = 0.0109269 Jy ! Component: 1700 - total flux cleaned = 0.011077 Jy ! Component: 1750 - total flux cleaned = 0.0112982 Jy ! Component: 1800 - total flux cleaned = 0.0114437 Jy ! Component: 1850 - total flux cleaned = 0.0115514 Jy ! Component: 1900 - total flux cleaned = 0.0117296 Jy ! Component: 1950 - total flux cleaned = 0.0117651 Jy ! Component: 2000 - total flux cleaned = 0.0119032 Jy ! Total flux subtracted in 2048 components = 0.012006 Jy ! Clean residual min=-0.001946 max=0.002106 Jy/beam ! Clean residual mean=0.000001 rms=0.000742 Jy/beam ! Combined flux in latest and established models = 0.123043 Jy keep ! Adding 149 model components to the UV plane model. ! The established model now contains 211 components and 0.123043 Jy ![Exited script file: muppet] wmap "J0457-1819_S_2005_07_09_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.072 x 7.834 at -1.609 degrees (North through East) ! Clean map min=-0.0032848 max=0.098929 Jy/beam ! Writing clean map to FITS file: J0457-1819_S_2005_07_09_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0989289 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000733202 device "J0457-1819_S_2005_07_09_yyk\_map.eps/VPS" ! Attempting to open device: 'J0457-1819_S_2005_07_09_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.22342 2.22342 4.44684 8.89369 17.7874 35.5747 71.1495 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.098 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.072 x 7.834 at -1.609 degrees (North through East) ! Clean map min=-0.0032848 max=0.098929 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0457-1819_S_2005_07_09_yyk\_map.gif/gif" ! Attempting to open device: 'J0457-1819_S_2005_07_09_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0457-1819_S_2005_07_09_yyk_uvs.log closed on Fri Jan 20 09:56:04 2006