! Started logfile: J0449-0057_X_2005_07_09_yyk_uvs.log on Fri Jan 20 09:55:18 2006 obs J0449-0057_X_2005_07_09_yyk_uve.fits ! Reading UV FITS file: J0449-0057_X_2005_07_09_yyk_uve.fits ! AN table 1: 11 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.981818 visibilities/baseline/integration-bin. ! Found source: J0449-0057 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1479 lines of history. ! ! Reading 1944 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0449-0057_X_2005_07_09_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.186993 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6889 mas, bmaj=1.835 mas, bpa=-1.702 degrees ! Estimated noise=1.21294 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.145011 Jy ! Component: 100 - total flux cleaned = 0.172149 Jy ! Total flux subtracted in 100 components = 0.172149 Jy ! Clean residual min=-0.006941 max=0.009376 Jy/beam ! Clean residual mean=-0.000016 rms=0.001673 Jy/beam ! Combined flux in latest and established models = 0.172149 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.172149 Jy ! ! Correcting IF 1. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.071548Jy sigma=1.137696 ! Fit after self-cal, rms=0.071330Jy sigma=1.127212 ! Inverting map and beam ! Estimated beam: bmin=0.6889 mas, bmaj=1.835 mas, bpa=-1.702 degrees ! Estimated noise=1.21294 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8729 mas, bmaj=2.125 mas, bpa=-0.849 degrees ! Estimated noise=0.868589 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.2, -2.6). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0140533 Jy ! Component: 100 - total flux cleaned = 0.0205853 Jy ! Component: 150 - total flux cleaned = 0.0245803 Jy ! Component: 200 - total flux cleaned = 0.0271284 Jy ! Total flux subtracted in 200 components = 0.0271284 Jy ! Clean residual min=-0.004827 max=0.005121 Jy/beam ! Clean residual mean=-0.000013 rms=0.001170 Jy/beam ! Combined flux in latest and established models = 0.199278 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 37 model components to the UV plane model. ! The established model now contains 42 components and 0.199278 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069364Jy sigma=1.082318 ! Fit after self-cal, rms=0.069330Jy sigma=1.080322 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8729 x 2.125 at -0.849 degrees (North through East) ! Clean map min=-0.0041185 max=0.16981 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00049 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 1.04 KP 0.99 ! LA 0.99 MK 0.99 NL 1.00 OV 1.01 ! PT 0.96 SC 1.01 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00683 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 1.05 KP 0.95 ! LA 0.97 MK 1.03 NL 0.97 OV 1.00 ! PT 1.01 SC 0.96 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.974722 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.06 HN 0.96 KP 0.94 ! LA 0.96 MK 1.04 NL 0.94 OV 1.10 ! PT 1.10 SC 1.14 ! ! ! Fit before self-cal, rms=0.069330Jy sigma=1.080322 ! Fit after self-cal, rms=0.068794Jy sigma=1.069450 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068794Jy sigma=1.069450 ! Fit after self-cal, rms=0.068797Jy sigma=1.069437 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8841 mas, bmaj=2.146 mas, bpa=-1.056 degrees ! Estimated noise=0.866516 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000914872 Jy ! Component: 100 - total flux cleaned = 0.000815955 Jy ! Component: 150 - total flux cleaned = 0.000680875 Jy ! Component: 200 - total flux cleaned = 0.00051635 Jy ! Total flux subtracted in 200 components = 0.00051635 Jy ! Clean residual min=-0.003220 max=0.003677 Jy/beam ! Clean residual mean=-0.000005 rms=0.001000 Jy/beam ! Combined flux in latest and established models = 0.199794 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 62 components and 0.199794 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068741Jy sigma=1.068276 ! Fit after self-cal, rms=0.068744Jy sigma=1.068187 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068744Jy sigma=1.068187 ! Fit after self-cal, rms=0.065823Jy sigma=1.011116 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101374 Jy ! Component: 100 - total flux cleaned = 0.00124824 Jy ! Component: 150 - total flux cleaned = 0.00129026 Jy ! Component: 200 - total flux cleaned = 0.00125588 Jy ! Total flux subtracted in 200 components = 0.00125588 Jy ! Clean residual min=-0.003292 max=0.003496 Jy/beam ! Clean residual mean=-0.000005 rms=0.000947 Jy/beam ! Combined flux in latest and established models = 0.20105 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 67 components and 0.20105 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065769Jy sigma=1.010142 ! Fit after self-cal, rms=0.065732Jy sigma=1.004224 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8841 x 2.146 at -1.056 degrees (North through East) ! Clean map min=-0.0031574 max=0.16993 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065732Jy sigma=1.004224 ! Fit after self-cal, rms=0.065300Jy sigma=0.989125 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065300Jy sigma=0.989125 ! Fit after self-cal, rms=0.065421Jy sigma=0.988074 ! Inverting map and beam ! Estimated beam: bmin=0.8803 mas, bmaj=2.135 mas, bpa=-0.7353 degrees ! Estimated noise=0.86751 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101224 Jy ! Component: 100 - total flux cleaned = 0.00115349 Jy ! Component: 150 - total flux cleaned = 0.0012095 Jy ! Component: 200 - total flux cleaned = 0.00120981 Jy ! Total flux subtracted in 200 components = 0.00120981 Jy ! Clean residual min=-0.003111 max=0.003383 Jy/beam ! Clean residual mean=-0.000003 rms=0.000856 Jy/beam ! Combined flux in latest and established models = 0.20226 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 83 components and 0.20226 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065379Jy sigma=0.987429 ! Fit after self-cal, rms=0.065458Jy sigma=0.987133 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065458Jy sigma=0.987133 ! Fit after self-cal, rms=0.065714Jy sigma=0.978451 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065714Jy sigma=0.978451 ! Fit after self-cal, rms=0.065778Jy sigma=0.978304 ! Inverting map and beam ! Estimated beam: bmin=0.8798 mas, bmaj=2.13 mas, bpa=-0.5093 degrees ! Estimated noise=0.873244 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00166388 Jy ! Component: 100 - total flux cleaned = 0.00212666 Jy ! Component: 150 - total flux cleaned = 0.00220417 Jy ! Component: 200 - total flux cleaned = 0.00224978 Jy ! Total flux subtracted in 200 components = 0.00224978 Jy ! Clean residual min=-0.003373 max=0.003471 Jy/beam ! Clean residual mean=-0.000004 rms=0.000870 Jy/beam ! Combined flux in latest and established models = 0.20451 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 89 components and 0.20451 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065738Jy sigma=0.977506 ! Fit after self-cal, rms=0.065775Jy sigma=0.977433 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.249 mas, bmaj=3.611 mas, bpa=-1.067 degrees ! Estimated noise=1.12528 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000822695 Jy ! Component: 100 - total flux cleaned = 0.000907483 Jy ! Component: 150 - total flux cleaned = 0.000906016 Jy ! Component: 200 - total flux cleaned = 0.000907809 Jy ! Total flux subtracted in 200 components = 0.000907809 Jy ! Clean residual min=-0.003800 max=0.004000 Jy/beam ! Clean residual mean=-0.000004 rms=0.001219 Jy/beam ! Combined flux in latest and established models = 0.205417 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 96 components and 0.205417 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065783Jy sigma=0.977505 ! Fit after self-cal, rms=0.065815Jy sigma=0.977440 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.694 mas, bmaj=1.84 mas, bpa=-1.623 degrees ! Estimated noise=1.22388 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.147317 Jy ! Component: 100 - total flux cleaned = 0.174902 Jy ! Component: 150 - total flux cleaned = 0.186429 Jy ! Component: 200 - total flux cleaned = 0.19285 Jy ! Total flux subtracted in 200 components = 0.19285 Jy ! Clean residual min=-0.004638 max=0.004468 Jy/beam ! Clean residual mean=-0.000007 rms=0.001192 Jy/beam ! Combined flux in latest and established models = 0.19285 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.19285 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8798 mas, bmaj=2.13 mas, bpa=-0.5093 degrees ! Estimated noise=0.873244 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00541914 Jy ! Component: 100 - total flux cleaned = 0.00822932 Jy ! Component: 150 - total flux cleaned = 0.00955574 Jy ! Component: 200 - total flux cleaned = 0.0101366 Jy ! Total flux subtracted in 200 components = 0.0101366 Jy ! Clean residual min=-0.003512 max=0.003553 Jy/beam ! Clean residual mean=-0.000005 rms=0.000895 Jy/beam ! Combined flux in latest and established models = 0.202986 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 54 components and 0.202986 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.249 mas, bmaj=3.611 mas, bpa=-1.067 degrees ! Estimated noise=1.12528 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00140522 Jy ! Component: 100 - total flux cleaned = 0.00174527 Jy ! Component: 150 - total flux cleaned = 0.00195757 Jy ! Component: 200 - total flux cleaned = 0.00208673 Jy ! Total flux subtracted in 200 components = 0.00208673 Jy ! Clean residual min=-0.003820 max=0.004105 Jy/beam ! Clean residual mean=-0.000006 rms=0.001228 Jy/beam ! Combined flux in latest and established models = 0.205073 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 64 components and 0.205073 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8798 mas, bmaj=2.13 mas, bpa=-0.5093 degrees ! Estimated noise=0.873244 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.1331e-05 Jy ! Component: 100 - total flux cleaned = -6.83191e-05 Jy ! Component: 150 - total flux cleaned = -0.000133906 Jy ! Component: 200 - total flux cleaned = -0.000163729 Jy ! Total flux subtracted in 200 components = -0.000163729 Jy ! Clean residual min=-0.003506 max=0.003542 Jy/beam ! Clean residual mean=-0.000003 rms=0.000869 Jy/beam ! Combined flux in latest and established models = 0.204909 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 76 components and 0.204909 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065836Jy sigma=0.977773 ! Fit after self-cal, rms=0.065854Jy sigma=0.977676 wmodel J0449-0057_X_2005_07_09_yyk\_map.mod ! Writing 76 model components to file: J0449-0057_X_2005_07_09_yyk_map.mod wobs J0449-0057_X_2005_07_09_yyk\_uvs.fits ! Writing UV FITS file: J0449-0057_X_2005_07_09_yyk_uvs.fits wwins J0449-0057_X_2005_07_09_yyk\_map.win ! wwins: Wrote 2 windows to J0449-0057_X_2005_07_09_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000315399 Jy ! Component: 100 - total flux cleaned = 0.000656733 Jy ! Component: 150 - total flux cleaned = 0.00113469 Jy ! Component: 200 - total flux cleaned = 0.00169103 Jy ! Component: 250 - total flux cleaned = 0.00217437 Jy ! Component: 300 - total flux cleaned = 0.00263686 Jy ! Component: 350 - total flux cleaned = 0.00281456 Jy ! Component: 400 - total flux cleaned = 0.00307348 Jy ! Component: 450 - total flux cleaned = 0.0032395 Jy ! Component: 500 - total flux cleaned = 0.00331991 Jy ! Component: 550 - total flux cleaned = 0.00339949 Jy ! Component: 600 - total flux cleaned = 0.00351512 Jy ! Component: 650 - total flux cleaned = 0.00351476 Jy ! Component: 700 - total flux cleaned = 0.00351373 Jy ! Component: 750 - total flux cleaned = 0.00358561 Jy ! Component: 800 - total flux cleaned = 0.00351471 Jy ! Component: 850 - total flux cleaned = 0.00379382 Jy ! Component: 900 - total flux cleaned = 0.00375836 Jy ! Component: 950 - total flux cleaned = 0.00372521 Jy ! Component: 1000 - total flux cleaned = 0.00379232 Jy ! Component: 1050 - total flux cleaned = 0.00382527 Jy ! Component: 1100 - total flux cleaned = 0.00395391 Jy ! Component: 1150 - total flux cleaned = 0.00404869 Jy ! Component: 1200 - total flux cleaned = 0.00411128 Jy ! Component: 1250 - total flux cleaned = 0.00426505 Jy ! Component: 1300 - total flux cleaned = 0.0042644 Jy ! Component: 1350 - total flux cleaned = 0.00423403 Jy ! Component: 1400 - total flux cleaned = 0.00423435 Jy ! Component: 1450 - total flux cleaned = 0.00446827 Jy ! Component: 1500 - total flux cleaned = 0.004439 Jy ! Component: 1550 - total flux cleaned = 0.00449628 Jy ! Component: 1600 - total flux cleaned = 0.00452431 Jy ! Component: 1650 - total flux cleaned = 0.00469143 Jy ! Component: 1700 - total flux cleaned = 0.00471915 Jy ! Component: 1750 - total flux cleaned = 0.00482836 Jy ! Component: 1800 - total flux cleaned = 0.00485501 Jy ! Component: 1850 - total flux cleaned = 0.00482875 Jy ! Component: 1900 - total flux cleaned = 0.0049613 Jy ! Component: 1950 - total flux cleaned = 0.00503978 Jy ! Component: 2000 - total flux cleaned = 0.00516931 Jy ! Total flux subtracted in 2048 components = 0.00516968 Jy ! Clean residual min=-0.001709 max=0.001734 Jy/beam ! Clean residual mean=-0.000001 rms=0.000494 Jy/beam ! Combined flux in latest and established models = 0.210079 Jy keep ! Adding 159 model components to the UV plane model. ! The established model now contains 235 components and 0.210079 Jy ![Exited script file: muppet] wmap "J0449-0057_X_2005_07_09_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8798 x 2.13 at -0.5093 degrees (North through East) ! Clean map min=-0.0022521 max=0.17191 Jy/beam ! Writing clean map to FITS file: J0449-0057_X_2005_07_09_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.171909 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000496034 device "J0449-0057_X_2005_07_09_yyk\_map.eps/VPS" ! Attempting to open device: 'J0449-0057_X_2005_07_09_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.865635 0.865635 1.73127 3.46254 6.92508 13.8502 27.7003 55.4006 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.171 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8798 x 2.13 at -0.5093 degrees (North through East) ! Clean map min=-0.0022521 max=0.17191 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0449-0057_X_2005_07_09_yyk\_map.gif/gif" ! Attempting to open device: 'J0449-0057_X_2005_07_09_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0449-0057_X_2005_07_09_yyk_uvs.log closed on Fri Jan 20 09:55:22 2006