! Started logfile: J0448-2109_S_2005_07_08_yyk_uvs.log on Fri Jan 20 09:55:04 2006 obs J0448-2109_S_2005_07_08_yyk_uve.fits ! Reading UV FITS file: J0448-2109_S_2005_07_08_yyk_uve.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.655556 visibilities/baseline/integration-bin. ! Found source: J0448-2109 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1412 lines of history. ! ! Reading 1180 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0448-2109_S_2005_07_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.135688 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.632 mas, bmaj=11.82 mas, bpa=9.117 degrees ! Estimated noise=1.66067 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0940457 Jy ! Component: 100 - total flux cleaned = 0.120993 Jy ! Total flux subtracted in 100 components = 0.120993 Jy ! Clean residual min=-0.008473 max=0.010058 Jy/beam ! Clean residual mean=-0.000242 rms=0.002794 Jy/beam ! Combined flux in latest and established models = 0.120993 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.120993 Jy ! ! Correcting IF 1. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 41 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.072195Jy sigma=1.126251 ! Fit after self-cal, rms=0.069475Jy sigma=1.077526 ! Inverting map and beam ! Estimated beam: bmin=3.632 mas, bmaj=11.82 mas, bpa=9.117 degrees ! Estimated noise=1.66067 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.556 mas, bmaj=14.23 mas, bpa=9.623 degrees ! Estimated noise=1.31138 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0145585 Jy ! Component: 100 - total flux cleaned = 0.0200006 Jy ! Component: 150 - total flux cleaned = 0.0212454 Jy ! Component: 200 - total flux cleaned = 0.0212452 Jy ! Total flux subtracted in 200 components = 0.0212452 Jy ! Clean residual min=-0.005004 max=0.006743 Jy/beam ! Clean residual mean=-0.000054 rms=0.001642 Jy/beam ! Combined flux in latest and established models = 0.142238 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 51 model components to the UV plane model. ! The established model now contains 72 components and 0.142238 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067351Jy sigma=1.041587 ! Fit after self-cal, rms=0.067308Jy sigma=1.041274 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.556 x 14.23 at 9.623 degrees (North through East) ! Clean map min=-0.0049842 max=0.11285 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.98745 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.97 HN 0.85 KP 1.12 ! LA 1.02 MK 1.00* NL 1.15 OV 1.10 ! PT 1.00 SC 0.97 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.067308Jy sigma=1.041274 ! Fit after self-cal, rms=0.067207Jy sigma=1.036095 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067207Jy sigma=1.036095 ! Fit after self-cal, rms=0.067209Jy sigma=1.036074 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.48 mas, bmaj=14.02 mas, bpa=9.349 degrees ! Estimated noise=1.30712 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00211165 Jy ! Component: 100 - total flux cleaned = 0.00211291 Jy ! Component: 150 - total flux cleaned = 0.00205271 Jy ! Component: 200 - total flux cleaned = 0.002056 Jy ! Total flux subtracted in 200 components = 0.002056 Jy ! Clean residual min=-0.004666 max=0.006463 Jy/beam ! Clean residual mean=-0.000050 rms=0.001567 Jy/beam ! Combined flux in latest and established models = 0.144294 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 79 components and 0.144294 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067024Jy sigma=1.034125 ! Fit after self-cal, rms=0.067016Jy sigma=1.034058 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067016Jy sigma=1.034058 ! Fit after self-cal, rms=0.064428Jy sigma=0.984989 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0013649 Jy ! Component: 100 - total flux cleaned = 0.0013697 Jy ! Component: 150 - total flux cleaned = 0.00132824 Jy ! Component: 200 - total flux cleaned = 0.00128847 Jy ! Total flux subtracted in 200 components = 0.00128847 Jy ! Clean residual min=-0.004996 max=0.006120 Jy/beam ! Clean residual mean=-0.000050 rms=0.001533 Jy/beam ! Combined flux in latest and established models = 0.145583 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 88 components and 0.145583 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064314Jy sigma=0.983784 ! Fit after self-cal, rms=0.064286Jy sigma=0.981490 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.48 x 14.02 at 9.349 degrees (North through East) ! Clean map min=-0.0049981 max=0.11358 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064286Jy sigma=0.981490 ! Fit after self-cal, rms=0.064272Jy sigma=0.976873 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064272Jy sigma=0.976873 ! Fit after self-cal, rms=0.064290Jy sigma=0.976686 ! Inverting map and beam ! Estimated beam: bmin=4.47 mas, bmaj=13.99 mas, bpa=9.455 degrees ! Estimated noise=1.31482 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000826167 Jy ! Component: 100 - total flux cleaned = 0.000918497 Jy ! Component: 150 - total flux cleaned = 0.000841447 Jy ! Component: 200 - total flux cleaned = 0.000841158 Jy ! Total flux subtracted in 200 components = 0.000841158 Jy ! Clean residual min=-0.004940 max=0.005597 Jy/beam ! Clean residual mean=-0.000010 rms=0.001527 Jy/beam ! Combined flux in latest and established models = 0.146424 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 102 components and 0.146424 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064206Jy sigma=0.975816 ! Fit after self-cal, rms=0.064214Jy sigma=0.975755 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064214Jy sigma=0.975755 ! Fit after self-cal, rms=0.064479Jy sigma=0.972722 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064479Jy sigma=0.972722 ! Fit after self-cal, rms=0.064479Jy sigma=0.972681 ! Inverting map and beam ! Estimated beam: bmin=4.447 mas, bmaj=13.93 mas, bpa=9.634 degrees ! Estimated noise=1.31715 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000796338 Jy ! Component: 100 - total flux cleaned = 0.000760399 Jy ! Component: 150 - total flux cleaned = 0.000795565 Jy ! Component: 200 - total flux cleaned = 0.000796579 Jy ! Total flux subtracted in 200 components = 0.000796579 Jy ! Clean residual min=-0.004978 max=0.005430 Jy/beam ! Clean residual mean=-0.000007 rms=0.001512 Jy/beam ! Combined flux in latest and established models = 0.14722 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 110 components and 0.147221 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064423Jy sigma=0.972144 ! Fit after self-cal, rms=0.064422Jy sigma=0.972127 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.665 mas, bmaj=20.96 mas, bpa=-2.147 degrees ! Estimated noise=1.49888 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000840423 Jy ! Component: 100 - total flux cleaned = 0.000731834 Jy ! Component: 150 - total flux cleaned = 0.000670779 Jy ! Component: 200 - total flux cleaned = 0.000642638 Jy ! Total flux subtracted in 200 components = 0.000642638 Jy ! Clean residual min=-0.004884 max=0.005831 Jy/beam ! Clean residual mean=-0.000008 rms=0.001693 Jy/beam ! Combined flux in latest and established models = 0.147863 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 127 components and 0.147863 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064403Jy sigma=0.972221 ! Fit after self-cal, rms=0.064390Jy sigma=0.972124 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.614 mas, bmaj=11.76 mas, bpa=9.081 degrees ! Estimated noise=1.6492 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0966124 Jy ! Component: 100 - total flux cleaned = 0.124597 Jy ! Component: 150 - total flux cleaned = 0.138091 Jy ! Component: 200 - total flux cleaned = 0.145298 Jy ! Total flux subtracted in 200 components = 0.145298 Jy ! Clean residual min=-0.006794 max=0.007457 Jy/beam ! Clean residual mean=-0.000097 rms=0.002075 Jy/beam ! Combined flux in latest and established models = 0.145298 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 57 model components to the UV plane model. ! The established model now contains 57 components and 0.145298 Jy ! Inverting map and beam ! Estimated beam: bmin=4.447 mas, bmaj=13.93 mas, bpa=9.634 degrees ! Estimated noise=1.31715 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00156056 Jy ! Component: 100 - total flux cleaned = 0.00186665 Jy ! Component: 150 - total flux cleaned = 0.00179312 Jy ! Component: 200 - total flux cleaned = 0.00172584 Jy ! Total flux subtracted in 200 components = 0.00172584 Jy ! Clean residual min=-0.005187 max=0.005431 Jy/beam ! Clean residual mean=-0.000011 rms=0.001543 Jy/beam ! Combined flux in latest and established models = 0.147024 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 81 components and 0.147024 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.665 mas, bmaj=20.96 mas, bpa=-2.147 degrees ! Estimated noise=1.49888 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00115549 Jy ! Component: 100 - total flux cleaned = 0.000939425 Jy ! Component: 150 - total flux cleaned = 0.000765217 Jy ! Component: 200 - total flux cleaned = 0.000726738 Jy ! Total flux subtracted in 200 components = 0.000726738 Jy ! Clean residual min=-0.004993 max=0.005808 Jy/beam ! Clean residual mean=-0.000010 rms=0.001705 Jy/beam ! Combined flux in latest and established models = 0.147751 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 91 components and 0.147751 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.447 mas, bmaj=13.93 mas, bpa=9.634 degrees ! Estimated noise=1.31715 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000604244 Jy ! Component: 100 - total flux cleaned = -0.000726824 Jy ! Component: 150 - total flux cleaned = -0.000774419 Jy ! Component: 200 - total flux cleaned = -0.000815447 Jy ! Total flux subtracted in 200 components = -0.000815447 Jy ! Clean residual min=-0.004981 max=0.005303 Jy/beam ! Clean residual mean=-0.000007 rms=0.001515 Jy/beam ! Combined flux in latest and established models = 0.146935 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 102 components and 0.146935 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064446Jy sigma=0.972698 ! Fit after self-cal, rms=0.064448Jy sigma=0.972645 wmodel J0448-2109_S_2005_07_08_yyk\_map.mod ! Writing 102 model components to file: J0448-2109_S_2005_07_08_yyk_map.mod wobs J0448-2109_S_2005_07_08_yyk\_uvs.fits ! Writing UV FITS file: J0448-2109_S_2005_07_08_yyk_uvs.fits wwins J0448-2109_S_2005_07_08_yyk\_map.win ! wwins: Wrote 1 windows to J0448-2109_S_2005_07_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00123499 Jy ! Component: 100 - total flux cleaned = 0.00189933 Jy ! Component: 150 - total flux cleaned = 0.00235523 Jy ! Component: 200 - total flux cleaned = 0.00278046 Jy ! Component: 250 - total flux cleaned = 0.00332501 Jy ! Component: 300 - total flux cleaned = 0.00384562 Jy ! Component: 350 - total flux cleaned = 0.00409931 Jy ! Component: 400 - total flux cleaned = 0.00440406 Jy ! Component: 450 - total flux cleaned = 0.00457784 Jy ! Component: 500 - total flux cleaned = 0.00446228 Jy ! Component: 550 - total flux cleaned = 0.00446096 Jy ! Component: 600 - total flux cleaned = 0.00451358 Jy ! Component: 650 - total flux cleaned = 0.00488071 Jy ! Component: 700 - total flux cleaned = 0.00493094 Jy ! Component: 750 - total flux cleaned = 0.00518072 Jy ! Component: 800 - total flux cleaned = 0.00522949 Jy ! Component: 850 - total flux cleaned = 0.00527632 Jy ! Component: 900 - total flux cleaned = 0.00541669 Jy ! Component: 950 - total flux cleaned = 0.00546233 Jy ! Component: 1000 - total flux cleaned = 0.00568818 Jy ! Component: 1050 - total flux cleaned = 0.00573239 Jy ! Component: 1100 - total flux cleaned = 0.00581929 Jy ! Component: 1150 - total flux cleaned = 0.00603096 Jy ! Component: 1200 - total flux cleaned = 0.00594771 Jy ! Component: 1250 - total flux cleaned = 0.00611162 Jy ! Component: 1300 - total flux cleaned = 0.00627203 Jy ! Component: 1350 - total flux cleaned = 0.00639009 Jy ! Component: 1400 - total flux cleaned = 0.00646644 Jy ! Component: 1450 - total flux cleaned = 0.00646665 Jy ! Component: 1500 - total flux cleaned = 0.00661716 Jy ! Component: 1550 - total flux cleaned = 0.00669055 Jy ! Component: 1600 - total flux cleaned = 0.00672746 Jy ! Component: 1650 - total flux cleaned = 0.00679951 Jy ! Component: 1700 - total flux cleaned = 0.00679999 Jy ! Component: 1750 - total flux cleaned = 0.00697575 Jy ! Component: 1800 - total flux cleaned = 0.00690589 Jy ! Component: 1850 - total flux cleaned = 0.00700888 Jy ! Component: 1900 - total flux cleaned = 0.00707703 Jy ! Component: 1950 - total flux cleaned = 0.00714415 Jy ! Component: 2000 - total flux cleaned = 0.00717714 Jy ! Total flux subtracted in 2048 components = 0.00721026 Jy ! Clean residual min=-0.002017 max=0.001896 Jy/beam ! Clean residual mean=-0.000016 rms=0.000714 Jy/beam ! Combined flux in latest and established models = 0.154146 Jy keep ! Adding 125 model components to the UV plane model. ! The established model now contains 227 components and 0.154146 Jy ![Exited script file: muppet] wmap "J0448-2109_S_2005_07_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.447 x 13.93 at 9.634 degrees (North through East) ! Clean map min=-0.0039394 max=0.11409 Jy/beam ! Writing clean map to FITS file: J0448-2109_S_2005_07_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.114087 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000701991 device "J0448-2109_S_2005_07_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J0448-2109_S_2005_07_08_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.84593 1.84593 3.69187 7.38374 14.7675 29.535 59.0699 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.114 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.447 x 13.93 at 9.634 degrees (North through East) ! Clean map min=-0.0039394 max=0.11409 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0448-2109_S_2005_07_08_yyk\_map.gif/gif" ! Attempting to open device: 'J0448-2109_S_2005_07_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0448-2109_S_2005_07_08_yyk_uvs.log closed on Fri Jan 20 09:55:08 2006