! Started logfile: J0422-2034_S_2005_07_09_yyk_uvs.log on Fri Jan 20 09:54:07 2006 obs J0422-2034_S_2005_07_09_yyk_uve.fits ! Reading UV FITS file: J0422-2034_S_2005_07_09_yyk_uve.fits ! AN table 1: 11 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.874747 visibilities/baseline/integration-bin. ! Found source: J0422-2034 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1602 lines of history. ! ! Reading 1732 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0422-2034_S_2005_07_09_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.149807 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.552 mas, bmaj=6.538 mas, bpa=-3.224 degrees ! Estimated noise=1.57755 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.093768 Jy ! Component: 100 - total flux cleaned = 0.127458 Jy ! Total flux subtracted in 100 components = 0.127458 Jy ! Clean residual min=-0.006980 max=0.011093 Jy/beam ! Clean residual mean=-0.000033 rms=0.002113 Jy/beam ! Combined flux in latest and established models = 0.127458 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.127458 Jy ! ! Correcting IF 1. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.076954Jy sigma=1.184397 ! Fit after self-cal, rms=0.075807Jy sigma=1.165729 ! Inverting map and beam ! Estimated beam: bmin=2.552 mas, bmaj=6.538 mas, bpa=-3.224 degrees ! Estimated noise=1.57755 mJy/beam. ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0161918 Jy ! Component: 100 - total flux cleaned = 0.0239425 Jy ! Total flux subtracted in 100 components = 0.0239425 Jy ! Clean residual min=-0.005723 max=0.005799 Jy/beam ! Clean residual mean=-0.000042 rms=0.001511 Jy/beam ! Combined flux in latest and established models = 0.151401 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 42 components and 0.1514 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071616Jy sigma=1.107667 ! Fit after self-cal, rms=0.071624Jy sigma=1.107284 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.528 mas, bmaj=9.127 mas, bpa=-4.815 degrees ! Estimated noise=1.05243 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00572185 Jy ! Component: 100 - total flux cleaned = 0.0061741 Jy ! Component: 150 - total flux cleaned = 0.0064603 Jy ! Component: 200 - total flux cleaned = 0.00670811 Jy ! Total flux subtracted in 200 components = 0.00670811 Jy ! Clean residual min=-0.004764 max=0.005383 Jy/beam ! Clean residual mean=-0.000146 rms=0.001606 Jy/beam ! Combined flux in latest and established models = 0.158109 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 6 model components to the UV plane model. ! The established model now contains 47 components and 0.158109 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071219Jy sigma=1.100031 ! Fit after self-cal, rms=0.071229Jy sigma=1.099866 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.528 x 9.127 at -4.815 degrees (North through East) ! Clean map min=-0.0046463 max=0.1148 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.02243 ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.97 HN 1.12 KP 0.93 ! LA 1.02 MK 0.94 NL 0.95 OV 0.93 ! PT 1.04 SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.071229Jy sigma=1.099866 ! Fit after self-cal, rms=0.071177Jy sigma=1.094895 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071177Jy sigma=1.094895 ! Fit after self-cal, rms=0.071177Jy sigma=1.094867 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.537 mas, bmaj=9.104 mas, bpa=-5.002 degrees ! Estimated noise=1.04746 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000336826 Jy ! Component: 100 - total flux cleaned = -0.000122617 Jy ! Component: 150 - total flux cleaned = 7.50495e-05 Jy ! Component: 200 - total flux cleaned = 0.000256322 Jy ! Total flux subtracted in 200 components = 0.000256322 Jy ! Clean residual min=-0.004699 max=0.005042 Jy/beam ! Clean residual mean=-0.000115 rms=0.001574 Jy/beam ! Combined flux in latest and established models = 0.158365 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 50 components and 0.158365 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071222Jy sigma=1.092968 ! Fit after self-cal, rms=0.071229Jy sigma=1.092881 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071229Jy sigma=1.092881 ! Fit after self-cal, rms=0.068104Jy sigma=1.045687 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000730566 Jy ! Component: 100 - total flux cleaned = 0.000927544 Jy ! Component: 150 - total flux cleaned = 0.00103602 Jy ! Component: 200 - total flux cleaned = 0.00103439 Jy ! Total flux subtracted in 200 components = 0.00103439 Jy ! Clean residual min=-0.004659 max=0.005081 Jy/beam ! Clean residual mean=-0.000109 rms=0.001562 Jy/beam ! Combined flux in latest and established models = 0.159399 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 59 components and 0.159399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067975Jy sigma=1.044093 ! Fit after self-cal, rms=0.067888Jy sigma=1.041972 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.537 x 9.104 at -5.002 degrees (North through East) ! Clean map min=-0.0045624 max=0.11444 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067888Jy sigma=1.041972 ! Fit after self-cal, rms=0.066367Jy sigma=1.037683 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066367Jy sigma=1.037683 ! Fit after self-cal, rms=0.066376Jy sigma=1.037325 ! Inverting map and beam ! Estimated beam: bmin=3.546 mas, bmaj=9.138 mas, bpa=-5.42 degrees ! Estimated noise=1.01985 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00322227 Jy ! Component: 100 - total flux cleaned = -0.00327383 Jy ! Component: 150 - total flux cleaned = -0.00319968 Jy ! Component: 200 - total flux cleaned = -0.00313214 Jy ! Total flux subtracted in 200 components = -0.00313214 Jy ! Clean residual min=-0.004503 max=0.005063 Jy/beam ! Clean residual mean=-0.000069 rms=0.001508 Jy/beam ! Combined flux in latest and established models = 0.156267 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 62 components and 0.156267 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066554Jy sigma=1.034861 ! Fit after self-cal, rms=0.066557Jy sigma=1.034786 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066557Jy sigma=1.034786 ! Fit after self-cal, rms=0.066622Jy sigma=1.034687 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066622Jy sigma=1.034687 ! Fit after self-cal, rms=0.066630Jy sigma=1.034638 ! Inverting map and beam ! Estimated beam: bmin=3.554 mas, bmaj=9.073 mas, bpa=-4.614 degrees ! Estimated noise=1.01288 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000725647 Jy ! Component: 100 - total flux cleaned = -0.00068667 Jy ! Component: 150 - total flux cleaned = -0.000621523 Jy ! Component: 200 - total flux cleaned = -0.000593763 Jy ! Total flux subtracted in 200 components = -0.000593763 Jy ! Clean residual min=-0.004556 max=0.004984 Jy/beam ! Clean residual mean=-0.000058 rms=0.001470 Jy/beam ! Combined flux in latest and established models = 0.155673 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 68 components and 0.155673 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066725Jy sigma=1.034009 ! Fit after self-cal, rms=0.066724Jy sigma=1.033976 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.477 mas, bmaj=18.19 mas, bpa=5.573 degrees ! Estimated noise=1.21565 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00156261 Jy ! Component: 100 - total flux cleaned = 0.00178818 Jy ! Component: 150 - total flux cleaned = 0.00206373 Jy ! Component: 200 - total flux cleaned = 0.00224672 Jy ! Total flux subtracted in 200 components = 0.00224672 Jy ! Clean residual min=-0.005946 max=0.005614 Jy/beam ! Clean residual mean=-0.000094 rms=0.001877 Jy/beam ! Combined flux in latest and established models = 0.15792 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 4 model components to the UV plane model. ! The established model now contains 69 components and 0.15792 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066863Jy sigma=1.034305 ! Fit after self-cal, rms=0.066859Jy sigma=1.034220 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.56 mas, bmaj=6.513 mas, bpa=-3.077 degrees ! Estimated noise=1.50831 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.092518 Jy ! Component: 100 - total flux cleaned = 0.124329 Jy ! Component: 150 - total flux cleaned = 0.138943 Jy ! Component: 200 - total flux cleaned = 0.146631 Jy ! Total flux subtracted in 200 components = 0.146631 Jy ! Clean residual min=-0.005147 max=0.004913 Jy/beam ! Clean residual mean=-0.000009 rms=0.001394 Jy/beam ! Combined flux in latest and established models = 0.146631 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.146631 Jy ! Inverting map and beam ! Estimated beam: bmin=3.554 mas, bmaj=9.073 mas, bpa=-4.614 degrees ! Estimated noise=1.01288 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00607387 Jy ! Component: 100 - total flux cleaned = 0.00704888 Jy ! Component: 150 - total flux cleaned = 0.00729713 Jy ! Component: 200 - total flux cleaned = 0.00744402 Jy ! Total flux subtracted in 200 components = 0.00744402 Jy ! Clean residual min=-0.004526 max=0.005424 Jy/beam ! Clean residual mean=-0.000057 rms=0.001537 Jy/beam ! Combined flux in latest and established models = 0.154075 Jy ! Adding 5 model components to the UV plane model. ! The established model now contains 39 components and 0.154075 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.477 mas, bmaj=18.19 mas, bpa=5.573 degrees ! Estimated noise=1.21565 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0021003 Jy ! Component: 100 - total flux cleaned = 0.00249711 Jy ! Component: 150 - total flux cleaned = 0.00276136 Jy ! Component: 200 - total flux cleaned = 0.00300277 Jy ! Total flux subtracted in 200 components = 0.00300277 Jy ! Clean residual min=-0.005965 max=0.006081 Jy/beam ! Clean residual mean=-0.000092 rms=0.001927 Jy/beam ! Combined flux in latest and established models = 0.157078 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 41 components and 0.157078 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.554 mas, bmaj=9.073 mas, bpa=-4.614 degrees ! Estimated noise=1.01288 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00152121 Jy ! Component: 100 - total flux cleaned = -0.00152413 Jy ! Component: 150 - total flux cleaned = -0.0015768 Jy ! Component: 200 - total flux cleaned = -0.00154377 Jy ! Total flux subtracted in 200 components = -0.00154377 Jy ! Clean residual min=-0.004567 max=0.004990 Jy/beam ! Clean residual mean=-0.000058 rms=0.001468 Jy/beam ! Combined flux in latest and established models = 0.155534 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 52 components and 0.155534 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066785Jy sigma=1.034508 ! Fit after self-cal, rms=0.066773Jy sigma=1.034427 wmodel J0422-2034_S_2005_07_09_yyk\_map.mod ! Writing 52 model components to file: J0422-2034_S_2005_07_09_yyk_map.mod wobs J0422-2034_S_2005_07_09_yyk\_uvs.fits ! Writing UV FITS file: J0422-2034_S_2005_07_09_yyk_uvs.fits wwins J0422-2034_S_2005_07_09_yyk\_map.win ! wwins: Wrote 1 windows to J0422-2034_S_2005_07_09_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000909357 Jy ! Component: 100 - total flux cleaned = 0.00130334 Jy ! Component: 150 - total flux cleaned = 0.00182961 Jy ! Component: 200 - total flux cleaned = 0.00218573 Jy ! Component: 250 - total flux cleaned = 0.00252564 Jy ! Component: 300 - total flux cleaned = 0.0027853 Jy ! Component: 350 - total flux cleaned = 0.0029732 Jy ! Component: 400 - total flux cleaned = 0.0032103 Jy ! Component: 450 - total flux cleaned = 0.00315282 Jy ! Component: 500 - total flux cleaned = 0.00337736 Jy ! Component: 550 - total flux cleaned = 0.00321575 Jy ! Component: 600 - total flux cleaned = 0.00316285 Jy ! Component: 650 - total flux cleaned = 0.00290878 Jy ! Component: 700 - total flux cleaned = 0.00276037 Jy ! Component: 750 - total flux cleaned = 0.0024703 Jy ! Component: 800 - total flux cleaned = 0.0021393 Jy ! Component: 850 - total flux cleaned = 0.00177013 Jy ! Component: 900 - total flux cleaned = 0.0014988 Jy ! Component: 950 - total flux cleaned = 0.00118796 Jy ! Component: 1000 - total flux cleaned = 0.000710164 Jy ! Component: 1050 - total flux cleaned = 0.000327207 Jy ! Component: 1100 - total flux cleaned = -8.98245e-05 Jy ! Component: 1150 - total flux cleaned = -0.000458994 Jy ! Component: 1200 - total flux cleaned = -0.000902157 Jy ! Component: 1250 - total flux cleaned = -0.00133718 Jy ! Component: 1300 - total flux cleaned = -0.00176399 Jy ! Component: 1350 - total flux cleaned = -0.00207057 Jy ! Component: 1400 - total flux cleaned = -0.00248413 Jy ! Component: 1450 - total flux cleaned = -0.00278075 Jy ! Component: 1500 - total flux cleaned = -0.00310873 Jy ! Component: 1550 - total flux cleaned = -0.00332437 Jy ! Component: 1600 - total flux cleaned = -0.00367909 Jy ! Component: 1650 - total flux cleaned = -0.00385376 Jy ! Component: 1700 - total flux cleaned = -0.00409558 Jy ! Component: 1750 - total flux cleaned = -0.00433386 Jy ! Component: 1800 - total flux cleaned = -0.00460283 Jy ! Component: 1850 - total flux cleaned = -0.00486807 Jy ! Component: 1900 - total flux cleaned = -0.00512956 Jy ! Component: 1950 - total flux cleaned = -0.0053887 Jy ! Component: 2000 - total flux cleaned = -0.00567646 Jy ! Total flux subtracted in 2048 components = -0.00596107 Jy ! Clean residual min=-0.001842 max=0.001694 Jy/beam ! Clean residual mean=-0.000055 rms=0.000684 Jy/beam ! Combined flux in latest and established models = 0.149573 Jy keep ! Adding 165 model components to the UV plane model. ! The established model now contains 217 components and 0.149573 Jy ![Exited script file: muppet] wmap "J0422-2034_S_2005_07_09_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.554 x 9.073 at -4.614 degrees (North through East) ! Clean map min=-0.0034557 max=0.10969 Jy/beam ! Writing clean map to FITS file: J0422-2034_S_2005_07_09_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.109689 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00068321 device "J0422-2034_S_2005_07_09_yyk\_map.eps/VPS" ! Attempting to open device: 'J0422-2034_S_2005_07_09_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.86858 1.86858 3.73717 7.47434 14.9487 29.8973 59.7947 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.109 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.554 x 9.073 at -4.614 degrees (North through East) ! Clean map min=-0.0034557 max=0.10969 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0422-2034_S_2005_07_09_yyk\_map.gif/gif" ! Attempting to open device: 'J0422-2034_S_2005_07_09_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0422-2034_S_2005_07_09_yyk_uvs.log closed on Fri Jan 20 09:54:11 2006