! Started logfile: J0402-1458_S_2005_07_08_yyk_uvs.log on Fri Jan 20 09:52:56 2006 obs J0402-1458_S_2005_07_08_yyk_uve.fits ! Reading UV FITS file: J0402-1458_S_2005_07_08_yyk_uve.fits ! AN table 1: 9 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J0402-1458 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1411 lines of history. ! ! Reading 1620 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0402-1458_S_2005_07_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.169658 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.619 mas, bmaj=6.612 mas, bpa=-4.98 degrees ! Estimated noise=1.31927 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.130975 Jy ! Component: 100 - total flux cleaned = 0.15628 Jy ! Total flux subtracted in 100 components = 0.15628 Jy ! Clean residual min=-0.005716 max=0.008002 Jy/beam ! Clean residual mean=0.000021 rms=0.001656 Jy/beam ! Combined flux in latest and established models = 0.156279 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.156279 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.063591Jy sigma=1.045256 ! Fit after self-cal, rms=0.063232Jy sigma=1.040503 ! Inverting map and beam ! Estimated beam: bmin=2.619 mas, bmaj=6.614 mas, bpa=-4.966 degrees ! Estimated noise=1.31963 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.12 mas, bmaj=7.986 mas, bpa=-4.985 degrees ! Estimated noise=1.00292 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0111122 Jy ! Component: 100 - total flux cleaned = 0.0152235 Jy ! Component: 150 - total flux cleaned = 0.0169516 Jy ! Component: 200 - total flux cleaned = 0.0175004 Jy ! Total flux subtracted in 200 components = 0.0175004 Jy ! Clean residual min=-0.003587 max=0.004261 Jy/beam ! Clean residual mean=0.000001 rms=0.001061 Jy/beam ! Combined flux in latest and established models = 0.17378 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 46 components and 0.17378 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061468Jy sigma=1.016313 ! Fit after self-cal, rms=0.061467Jy sigma=1.016180 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.12 x 7.986 at -4.985 degrees (North through East) ! Clean map min=-0.003464 max=0.15237 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01326 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.99 HN 0.98 KP 1.05 ! LA 1.05 MK 0.89 NL 0.92 OV 0.99 ! PT 1.10 SC 0.94 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.984318 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.08 HN 1.01 KP 1.00 ! LA 1.03 MK 0.94 NL 0.98 OV 1.07 ! PT 1.03 SC 1.02 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.985185 ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.90 HN 1.03 KP 1.00 ! LA 0.95 MK 1.06 NL 0.99 OV 1.06 ! PT 1.13 SC 0.95 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.061467Jy sigma=1.016180 ! Fit after self-cal, rms=0.060227Jy sigma=0.998926 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060227Jy sigma=0.998926 ! Fit after self-cal, rms=0.060224Jy sigma=0.998859 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.049 mas, bmaj=7.816 mas, bpa=-5.056 degrees ! Estimated noise=1.00652 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00353049 Jy ! Component: 100 - total flux cleaned = 0.00485962 Jy ! Component: 150 - total flux cleaned = 0.00513818 Jy ! Component: 200 - total flux cleaned = 0.00533544 Jy ! Total flux subtracted in 200 components = 0.00533544 Jy ! Clean residual min=-0.003272 max=0.003897 Jy/beam ! Clean residual mean=0.000018 rms=0.000952 Jy/beam ! Combined flux in latest and established models = 0.179115 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 53 components and 0.179115 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059995Jy sigma=0.996103 ! Fit after self-cal, rms=0.059993Jy sigma=0.996030 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059993Jy sigma=0.996030 ! Fit after self-cal, rms=0.057754Jy sigma=0.960202 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000839539 Jy ! Component: 100 - total flux cleaned = 0.000941022 Jy ! Component: 150 - total flux cleaned = 0.00106807 Jy ! Component: 200 - total flux cleaned = 0.00106868 Jy ! Total flux subtracted in 200 components = 0.00106868 Jy ! Clean residual min=-0.003233 max=0.003840 Jy/beam ! Clean residual mean=0.000021 rms=0.000945 Jy/beam ! Combined flux in latest and established models = 0.180184 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 58 components and 0.180184 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057714Jy sigma=0.959856 ! Fit after self-cal, rms=0.057575Jy sigma=0.957581 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.049 x 7.816 at -5.056 degrees (North through East) ! Clean map min=-0.0031296 max=0.15238 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057575Jy sigma=0.957581 ! Fit after self-cal, rms=0.057839Jy sigma=0.946576 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057839Jy sigma=0.946576 ! Fit after self-cal, rms=0.057844Jy sigma=0.946311 ! Inverting map and beam ! Estimated beam: bmin=2.993 mas, bmaj=7.692 mas, bpa=-5.205 degrees ! Estimated noise=1.02047 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00387073 Jy ! Component: 100 - total flux cleaned = 0.00554421 Jy ! Component: 150 - total flux cleaned = 0.0063195 Jy ! Component: 200 - total flux cleaned = 0.00648386 Jy ! Total flux subtracted in 200 components = 0.00648386 Jy ! Clean residual min=-0.003291 max=0.003820 Jy/beam ! Clean residual mean=0.000021 rms=0.000932 Jy/beam ! Combined flux in latest and established models = 0.186668 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 65 components and 0.186668 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057556Jy sigma=0.943097 ! Fit after self-cal, rms=0.057560Jy sigma=0.943026 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057560Jy sigma=0.943026 ! Fit after self-cal, rms=0.056348Jy sigma=0.922391 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056348Jy sigma=0.922391 ! Fit after self-cal, rms=0.056355Jy sigma=0.922313 ! Inverting map and beam ! Estimated beam: bmin=2.956 mas, bmaj=7.589 mas, bpa=-4.982 degrees ! Estimated noise=1.02309 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00214246 Jy ! Component: 100 - total flux cleaned = 0.00307921 Jy ! Component: 150 - total flux cleaned = 0.00333389 Jy ! Component: 200 - total flux cleaned = 0.00338326 Jy ! Total flux subtracted in 200 components = 0.00338326 Jy ! Clean residual min=-0.003089 max=0.003849 Jy/beam ! Clean residual mean=0.000029 rms=0.000921 Jy/beam ! Combined flux in latest and established models = 0.190051 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 70 components and 0.190051 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056275Jy sigma=0.921271 ! Fit after self-cal, rms=0.056277Jy sigma=0.921245 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.584 mas, bmaj=14.74 mas, bpa=-0.7399 degrees ! Estimated noise=1.36315 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000541928 Jy ! Component: 100 - total flux cleaned = 0.00060951 Jy ! Component: 150 - total flux cleaned = 0.000670616 Jy ! Component: 200 - total flux cleaned = 0.000726557 Jy ! Total flux subtracted in 200 components = 0.000726557 Jy ! Clean residual min=-0.003306 max=0.003340 Jy/beam ! Clean residual mean=0.000059 rms=0.001151 Jy/beam ! Combined flux in latest and established models = 0.190778 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 6 model components to the UV plane model. ! The established model now contains 73 components and 0.190778 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056268Jy sigma=0.921211 ! Fit after self-cal, rms=0.056268Jy sigma=0.921178 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.574 mas, bmaj=6.507 mas, bpa=-5.076 degrees ! Estimated noise=1.30867 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.130837 Jy ! Component: 100 - total flux cleaned = 0.1594 Jy ! Component: 150 - total flux cleaned = 0.173256 Jy ! Component: 200 - total flux cleaned = 0.180574 Jy ! Total flux subtracted in 200 components = 0.180574 Jy ! Clean residual min=-0.004448 max=0.005346 Jy/beam ! Clean residual mean=0.000031 rms=0.001210 Jy/beam ! Combined flux in latest and established models = 0.180574 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 47 model components to the UV plane model. ! The established model now contains 47 components and 0.180574 Jy ! Inverting map and beam ! Estimated beam: bmin=2.956 mas, bmaj=7.589 mas, bpa=-4.982 degrees ! Estimated noise=1.02309 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00507041 Jy ! Component: 100 - total flux cleaned = 0.00732884 Jy ! Component: 150 - total flux cleaned = 0.00781304 Jy ! Component: 200 - total flux cleaned = 0.00808184 Jy ! Total flux subtracted in 200 components = 0.00808184 Jy ! Clean residual min=-0.003194 max=0.003816 Jy/beam ! Clean residual mean=0.000030 rms=0.000940 Jy/beam ! Combined flux in latest and established models = 0.188656 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 68 components and 0.188656 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.584 mas, bmaj=14.74 mas, bpa=-0.7399 degrees ! Estimated noise=1.36315 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00150388 Jy ! Component: 100 - total flux cleaned = 0.00158879 Jy ! Component: 150 - total flux cleaned = 0.00166641 Jy ! Component: 200 - total flux cleaned = 0.00173675 Jy ! Total flux subtracted in 200 components = 0.00173675 Jy ! Clean residual min=-0.003340 max=0.003331 Jy/beam ! Clean residual mean=0.000059 rms=0.001164 Jy/beam ! Combined flux in latest and established models = 0.190393 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 73 components and 0.190393 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.956 mas, bmaj=7.589 mas, bpa=-4.982 degrees ! Estimated noise=1.02309 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000458273 Jy ! Component: 100 - total flux cleaned = -0.000488595 Jy ! Component: 150 - total flux cleaned = -0.000450359 Jy ! Component: 200 - total flux cleaned = -0.000451893 Jy ! Total flux subtracted in 200 components = -0.000451893 Jy ! Clean residual min=-0.003159 max=0.003856 Jy/beam ! Clean residual mean=0.000030 rms=0.000924 Jy/beam ! Combined flux in latest and established models = 0.189941 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 86 components and 0.189941 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056271Jy sigma=0.921400 ! Fit after self-cal, rms=0.056270Jy sigma=0.921382 wmodel J0402-1458_S_2005_07_08_yyk\_map.mod ! Writing 86 model components to file: J0402-1458_S_2005_07_08_yyk_map.mod wobs J0402-1458_S_2005_07_08_yyk\_uvs.fits ! Writing UV FITS file: J0402-1458_S_2005_07_08_yyk_uvs.fits wwins J0402-1458_S_2005_07_08_yyk\_map.win ! wwins: Wrote 1 windows to J0402-1458_S_2005_07_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00133054 Jy ! Component: 100 - total flux cleaned = 0.0015659 Jy ! Component: 150 - total flux cleaned = 0.00151159 Jy ! Component: 200 - total flux cleaned = 0.00171553 Jy ! Component: 250 - total flux cleaned = 0.00191282 Jy ! Component: 300 - total flux cleaned = 0.00219811 Jy ! Component: 350 - total flux cleaned = 0.00233612 Jy ! Component: 400 - total flux cleaned = 0.0023822 Jy ! Component: 450 - total flux cleaned = 0.00264237 Jy ! Component: 500 - total flux cleaned = 0.00276922 Jy ! Component: 550 - total flux cleaned = 0.00289383 Jy ! Component: 600 - total flux cleaned = 0.00305541 Jy ! Component: 650 - total flux cleaned = 0.00325187 Jy ! Component: 700 - total flux cleaned = 0.0031753 Jy ! Component: 750 - total flux cleaned = 0.00328877 Jy ! Component: 800 - total flux cleaned = 0.00328802 Jy ! Component: 850 - total flux cleaned = 0.00328742 Jy ! Component: 900 - total flux cleaned = 0.0033232 Jy ! Component: 950 - total flux cleaned = 0.00339261 Jy ! Component: 1000 - total flux cleaned = 0.00342667 Jy ! Component: 1050 - total flux cleaned = 0.0034598 Jy ! Component: 1100 - total flux cleaned = 0.00342747 Jy ! Component: 1150 - total flux cleaned = 0.00352487 Jy ! Component: 1200 - total flux cleaned = 0.00346073 Jy ! Component: 1250 - total flux cleaned = 0.00349203 Jy ! Component: 1300 - total flux cleaned = 0.00361535 Jy ! Component: 1350 - total flux cleaned = 0.00367603 Jy ! Component: 1400 - total flux cleaned = 0.00361649 Jy ! Component: 1450 - total flux cleaned = 0.00370457 Jy ! Component: 1500 - total flux cleaned = 0.00364676 Jy ! Component: 1550 - total flux cleaned = 0.00367514 Jy ! Component: 1600 - total flux cleaned = 0.00359055 Jy ! Component: 1650 - total flux cleaned = 0.00356323 Jy ! Component: 1700 - total flux cleaned = 0.00361863 Jy ! Component: 1750 - total flux cleaned = 0.00361857 Jy ! Component: 1800 - total flux cleaned = 0.00353787 Jy ! Component: 1850 - total flux cleaned = 0.00351109 Jy ! Component: 1900 - total flux cleaned = 0.00343217 Jy ! Component: 1950 - total flux cleaned = 0.00345819 Jy ! Component: 2000 - total flux cleaned = 0.00343215 Jy ! Total flux subtracted in 2048 components = 0.0033813 Jy ! Clean residual min=-0.001862 max=0.001694 Jy/beam ! Clean residual mean=0.000021 rms=0.000508 Jy/beam ! Combined flux in latest and established models = 0.193322 Jy keep ! Adding 138 model components to the UV plane model. ! The established model now contains 224 components and 0.193322 Jy ![Exited script file: muppet] wmap "J0402-1458_S_2005_07_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.956 x 7.589 at -4.982 degrees (North through East) ! Clean map min=-0.0025927 max=0.15317 Jy/beam ! Writing clean map to FITS file: J0402-1458_S_2005_07_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.153167 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000506095 device "J0402-1458_S_2005_07_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J0402-1458_S_2005_07_08_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.991258 0.991258 1.98252 3.96503 7.93007 15.8601 31.7203 63.4405 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.153 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.956 x 7.589 at -4.982 degrees (North through East) ! Clean map min=-0.0025927 max=0.15317 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0402-1458_S_2005_07_08_yyk\_map.gif/gif" ! Attempting to open device: 'J0402-1458_S_2005_07_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0402-1458_S_2005_07_08_yyk_uvs.log closed on Fri Jan 20 09:53:00 2006