! Started logfile: J0339-0146_S_2005_07_09_yyk_uvs.log on Fri Jan 20 09:51:30 2006 obs J0339-0146_S_2005_07_09_yyk_uve.fits ! Reading UV FITS file: J0339-0146_S_2005_07_09_yyk_uve.fits ! AN table 1: 5 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.866667 visibilities/baseline/integration-bin. ! Found source: J0339-0146 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1602 lines of history. ! ! Reading 780 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0339-0146_S_2005_07_09_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 2.07417 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.617 mas, bmaj=6.651 mas, bpa=-3.514 degrees ! Estimated noise=2.02262 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.68758 Jy ! Component: 100 - total flux cleaned = 2.10588 Jy ! Total flux subtracted in 100 components = 2.10588 Jy ! Clean residual min=-0.057522 max=0.127864 Jy/beam ! Clean residual mean=0.000329 rms=0.022190 Jy/beam ! Combined flux in latest and established models = 2.10588 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 2.10588 Jy ! ! Correcting IF 1. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.340690Jy sigma=5.005072 ! Fit after self-cal, rms=0.340996Jy sigma=4.979966 ! Inverting map and beam ! Estimated beam: bmin=2.617 mas, bmaj=6.651 mas, bpa=-3.514 degrees ! Estimated noise=2.02262 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.041 mas, bmaj=7.923 mas, bpa=-3.655 degrees ! Estimated noise=1.59522 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.189317 Jy ! Component: 100 - total flux cleaned = 0.257085 Jy ! Component: 150 - total flux cleaned = 0.28677 Jy ! Component: 200 - total flux cleaned = 0.30035 Jy ! Total flux subtracted in 200 components = 0.30035 Jy ! Clean residual min=-0.034368 max=0.038425 Jy/beam ! Clean residual mean=-0.000511 rms=0.010235 Jy/beam ! Combined flux in latest and established models = 2.40623 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 40 components and 2.40623 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.251674Jy sigma=3.603876 ! Fit after self-cal, rms=0.251173Jy sigma=3.600069 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.041 x 7.923 at -3.655 degrees (North through East) ! Clean map min=-0.032758 max=1.9645 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.02208 ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.02 HN 0.99 KP 0.96 ! LA 1.07 MK 0.91 NL 0.94 OV 0.98 ! PT 1.08 SC 0.95 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.984007 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.01 HN 1.04 KP 1.01 ! LA 1.04 MK 0.98 NL 0.98 OV 1.01 ! PT 1.05 SC 1.00 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.973339 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 1.01 KP 1.00 ! LA 0.95 MK 1.10 NL 1.05 OV 1.04 ! PT 1.13 SC 1.04 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.03428 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 0.92 KP 0.90 ! LA 0.80 MK 1.10 NL 0.97 OV 0.89 ! PT 1.00 SC 1.11 ! ! ! Fit before self-cal, rms=0.251173Jy sigma=3.600069 ! Fit after self-cal, rms=0.153079Jy sigma=2.194693 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153079Jy sigma=2.194693 ! Fit after self-cal, rms=0.153046Jy sigma=2.193765 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.095 mas, bmaj=8.021 mas, bpa=-3.809 degrees ! Estimated noise=1.60341 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0135518 Jy ! Component: 100 - total flux cleaned = 0.0129415 Jy ! Component: 150 - total flux cleaned = 0.0126852 Jy ! Component: 200 - total flux cleaned = 0.0124605 Jy ! Total flux subtracted in 200 components = 0.0124605 Jy ! Clean residual min=-0.018247 max=0.021613 Jy/beam ! Clean residual mean=-0.000012 rms=0.004645 Jy/beam ! Combined flux in latest and established models = 2.41869 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 51 components and 2.41869 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151228Jy sigma=2.171274 ! Fit after self-cal, rms=0.150959Jy sigma=2.168619 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150959Jy sigma=2.168619 ! Fit after self-cal, rms=0.143503Jy sigma=2.063092 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-13, 43). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.013645 Jy ! Component: 100 - total flux cleaned = 0.013574 Jy ! Component: 150 - total flux cleaned = 0.0149105 Jy ! Component: 200 - total flux cleaned = 0.0146474 Jy ! Total flux subtracted in 200 components = 0.0146474 Jy ! Clean residual min=-0.015880 max=0.010742 Jy/beam ! Clean residual mean=-0.000051 rms=0.003148 Jy/beam ! Combined flux in latest and established models = 2.43334 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 69 components and 2.43334 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141223Jy sigma=2.019766 ! Fit after self-cal, rms=0.140355Jy sigma=2.009489 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.095 x 8.021 at -3.809 degrees (North through East) ! Clean map min=-0.014909 max=1.9891 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140355Jy sigma=2.009489 ! Fit after self-cal, rms=0.092382Jy sigma=1.156373 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092382Jy sigma=1.156373 ! Fit after self-cal, rms=0.092349Jy sigma=1.153997 ! Inverting map and beam ! Estimated beam: bmin=3.102 mas, bmaj=8.007 mas, bpa=-3.889 degrees ! Estimated noise=1.60017 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00330384 Jy ! Component: 100 - total flux cleaned = 0.00248392 Jy ! Component: 150 - total flux cleaned = 0.00230393 Jy ! Component: 200 - total flux cleaned = 0.00230357 Jy ! Total flux subtracted in 200 components = 0.00230357 Jy ! Clean residual min=-0.008833 max=0.007439 Jy/beam ! Clean residual mean=-0.000029 rms=0.002047 Jy/beam ! Combined flux in latest and established models = 2.43564 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 85 components and 2.43564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091611Jy sigma=1.139259 ! Fit after self-cal, rms=0.091601Jy sigma=1.138138 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091601Jy sigma=1.138138 ! Fit after self-cal, rms=0.086054Jy sigma=1.037181 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086054Jy sigma=1.037181 ! Fit after self-cal, rms=0.086097Jy sigma=1.037069 ! Inverting map and beam ! Estimated beam: bmin=3.102 mas, bmaj=8.009 mas, bpa=-3.888 degrees ! Estimated noise=1.60014 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000475505 Jy ! Component: 100 - total flux cleaned = 0.00048002 Jy ! Component: 150 - total flux cleaned = 0.000480573 Jy ! Component: 200 - total flux cleaned = 0.000478892 Jy ! Total flux subtracted in 200 components = 0.000478892 Jy ! Clean residual min=-0.008484 max=0.007735 Jy/beam ! Clean residual mean=-0.000029 rms=0.001936 Jy/beam ! Combined flux in latest and established models = 2.43612 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 102 components and 2.43612 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085790Jy sigma=1.031366 ! Fit after self-cal, rms=0.085791Jy sigma=1.031170 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.658 mas, bmaj=13.45 mas, bpa=-7.193 degrees ! Estimated noise=2.07095 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00141387 Jy ! Component: 100 - total flux cleaned = -0.00207565 Jy ! Component: 150 - total flux cleaned = -0.00265804 Jy ! Component: 200 - total flux cleaned = -0.00314407 Jy ! Total flux subtracted in 200 components = -0.00314407 Jy ! Clean residual min=-0.007921 max=0.006925 Jy/beam ! Clean residual mean=-0.000054 rms=0.002297 Jy/beam ! Combined flux in latest and established models = 2.43298 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 106 components and 2.43298 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086074Jy sigma=1.032717 ! Fit after self-cal, rms=0.085951Jy sigma=1.031028 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.644 mas, bmaj=6.71 mas, bpa=-3.617 degrees ! Estimated noise=2.01247 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.67461 Jy ! Component: 100 - total flux cleaned = 2.07672 Jy ! Component: 150 - total flux cleaned = 2.24119 Jy ! Component: 200 - total flux cleaned = 2.31495 Jy ! Total flux subtracted in 200 components = 2.31495 Jy ! Clean residual min=-0.016826 max=0.035949 Jy/beam ! Clean residual mean=0.000147 rms=0.005779 Jy/beam ! Combined flux in latest and established models = 2.31495 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 2.31495 Jy ! Inverting map and beam ! Estimated beam: bmin=3.102 mas, bmaj=8.009 mas, bpa=-3.888 degrees ! Estimated noise=1.60014 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.5, 1). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0599827 Jy ! Component: 100 - total flux cleaned = 0.0868535 Jy ! Component: 150 - total flux cleaned = 0.101497 Jy ! Component: 200 - total flux cleaned = 0.107577 Jy ! Total flux subtracted in 200 components = 0.107577 Jy ! Clean residual min=-0.008250 max=0.008394 Jy/beam ! Clean residual mean=0.000019 rms=0.002071 Jy/beam ! Combined flux in latest and established models = 2.42253 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 77 components and 2.42253 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.658 mas, bmaj=13.45 mas, bpa=-7.193 degrees ! Estimated noise=2.07095 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00204373 Jy ! Component: 100 - total flux cleaned = 0.00203446 Jy ! Component: 150 - total flux cleaned = 0.00237501 Jy ! Component: 200 - total flux cleaned = 0.00266114 Jy ! Total flux subtracted in 200 components = 0.00266114 Jy ! Clean residual min=-0.007428 max=0.006476 Jy/beam ! Clean residual mean=-0.000014 rms=0.002239 Jy/beam ! Combined flux in latest and established models = 2.42519 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 106 components and 2.42519 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.102 mas, bmaj=8.009 mas, bpa=-3.888 degrees ! Estimated noise=1.60014 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000262555 Jy ! Component: 100 - total flux cleaned = -0.000478205 Jy ! Component: 150 - total flux cleaned = -0.000309349 Jy ! Component: 200 - total flux cleaned = 0.000151528 Jy ! Total flux subtracted in 200 components = 0.000151528 Jy ! Clean residual min=-0.007619 max=0.006760 Jy/beam ! Clean residual mean=-0.000005 rms=0.001709 Jy/beam ! Combined flux in latest and established models = 2.42534 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 133 components and 2.42534 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085144Jy sigma=1.014368 ! Fit after self-cal, rms=0.084945Jy sigma=1.011947 wmodel J0339-0146_S_2005_07_09_yyk\_map.mod ! Writing 133 model components to file: J0339-0146_S_2005_07_09_yyk_map.mod wobs J0339-0146_S_2005_07_09_yyk\_uvs.fits ! Writing UV FITS file: J0339-0146_S_2005_07_09_yyk_uvs.fits wwins J0339-0146_S_2005_07_09_yyk\_map.win ! wwins: Wrote 3 windows to J0339-0146_S_2005_07_09_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0032004 Jy ! Component: 100 - total flux cleaned = -0.00509815 Jy ! Component: 150 - total flux cleaned = -0.00537963 Jy ! Component: 200 - total flux cleaned = -0.00529172 Jy ! Component: 250 - total flux cleaned = -0.00512237 Jy ! Component: 300 - total flux cleaned = -0.00520436 Jy ! Component: 350 - total flux cleaned = -0.00520717 Jy ! Component: 400 - total flux cleaned = -0.00513562 Jy ! Component: 450 - total flux cleaned = -0.00492936 Jy ! Component: 500 - total flux cleaned = -0.00499678 Jy ! Component: 550 - total flux cleaned = -0.00493009 Jy ! Component: 600 - total flux cleaned = -0.00492966 Jy ! Component: 650 - total flux cleaned = -0.00499113 Jy ! Component: 700 - total flux cleaned = -0.00510943 Jy ! Component: 750 - total flux cleaned = -0.00499565 Jy ! Component: 800 - total flux cleaned = -0.00483081 Jy ! Component: 850 - total flux cleaned = -0.00477777 Jy ! Component: 900 - total flux cleaned = -0.0046216 Jy ! Component: 950 - total flux cleaned = -0.00451997 Jy ! Component: 1000 - total flux cleaned = -0.00451982 Jy ! Component: 1050 - total flux cleaned = -0.00442149 Jy ! Component: 1100 - total flux cleaned = -0.00413617 Jy ! Component: 1150 - total flux cleaned = -0.00395021 Jy ! Component: 1200 - total flux cleaned = -0.0037234 Jy ! Component: 1250 - total flux cleaned = -0.0037236 Jy ! Component: 1300 - total flux cleaned = -0.00354805 Jy ! Component: 1350 - total flux cleaned = -0.00337667 Jy ! Component: 1400 - total flux cleaned = -0.00324991 Jy ! Component: 1450 - total flux cleaned = -0.00300084 Jy ! Component: 1500 - total flux cleaned = -0.00287938 Jy ! Component: 1550 - total flux cleaned = -0.00264007 Jy ! Component: 1600 - total flux cleaned = -0.00244401 Jy ! Component: 1650 - total flux cleaned = -0.00236625 Jy ! Component: 1700 - total flux cleaned = -0.00198359 Jy ! Component: 1750 - total flux cleaned = -0.00175787 Jy ! Component: 1800 - total flux cleaned = -0.00153503 Jy ! Component: 1850 - total flux cleaned = -0.00120572 Jy ! Component: 1900 - total flux cleaned = -0.000989247 Jy ! Component: 1950 - total flux cleaned = -0.000668589 Jy ! Component: 2000 - total flux cleaned = -0.00024558 Jy ! Total flux subtracted in 2048 components = -0.000106261 Jy ! Clean residual min=-0.001771 max=0.002086 Jy/beam ! Clean residual mean=0.000003 rms=0.000692 Jy/beam ! Combined flux in latest and established models = 2.42523 Jy keep ! Adding 127 model components to the UV plane model. ! The established model now contains 260 components and 2.42523 Jy ![Exited script file: muppet] wmap "J0339-0146_S_2005_07_09_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.102 x 8.009 at -3.888 degrees (North through East) ! Clean map min=-0.0046037 max=1.9881 Jy/beam ! Writing clean map to FITS file: J0339-0146_S_2005_07_09_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.98805 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000685449 device "J0339-0146_S_2005_07_09_yyk\_map.eps/VPS" ! Attempting to open device: 'J0339-0146_S_2005_07_09_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.103435 0.103435 0.206871 0.413741 0.827483 1.65497 3.30993 6.61986 13.2397 26.4794 52.9589 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.988 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.102 x 8.009 at -3.888 degrees (North through East) ! Clean map min=-0.0046037 max=1.9881 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0339-0146_S_2005_07_09_yyk\_map.gif/gif" ! Attempting to open device: 'J0339-0146_S_2005_07_09_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0339-0146_S_2005_07_09_yyk_uvs.log closed on Fri Jan 20 09:51:34 2006