! Started logfile: J0335-0709_S_2005_07_08_yyk_uvs.log on Fri Jan 20 09:51:07 2006 obs J0335-0709_S_2005_07_08_yyk_uve.fits ! Reading UV FITS file: J0335-0709_S_2005_07_08_yyk_uve.fits ! AN table 1: 12 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.798148 visibilities/baseline/integration-bin. ! Found source: J0335-0709 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1412 lines of history. ! ! Reading 1724 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0335-0709_S_2005_07_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.128819 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.587 mas, bmaj=6.564 mas, bpa=-3.039 degrees ! Estimated noise=1.221 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0884625 Jy ! Component: 100 - total flux cleaned = 0.104191 Jy ! Total flux subtracted in 100 components = 0.104191 Jy ! Clean residual min=-0.007044 max=0.007396 Jy/beam ! Clean residual mean=0.000011 rms=0.001878 Jy/beam ! Combined flux in latest and established models = 0.104191 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.104191 Jy ! ! Correcting IF 1. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.073924Jy sigma=1.225092 ! Fit after self-cal, rms=0.073531Jy sigma=1.216824 ! Inverting map and beam ! Estimated beam: bmin=2.587 mas, bmaj=6.564 mas, bpa=-3.039 degrees ! Estimated noise=1.221 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.11 mas, bmaj=7.615 mas, bpa=-3.823 degrees ! Estimated noise=0.922755 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00620852 Jy ! Component: 100 - total flux cleaned = 0.00858839 Jy ! Component: 150 - total flux cleaned = 0.00900119 Jy ! Component: 200 - total flux cleaned = 0.0092183 Jy ! Total flux subtracted in 200 components = 0.0092183 Jy ! Clean residual min=-0.005755 max=0.005669 Jy/beam ! Clean residual mean=0.000029 rms=0.001538 Jy/beam ! Combined flux in latest and established models = 0.113409 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 30 components and 0.113409 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073074Jy sigma=1.208070 ! Fit after self-cal, rms=0.073067Jy sigma=1.207949 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.11 x 7.615 at -3.823 degrees (North through East) ! Clean map min=-0.0055019 max=0.099781 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01976 ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.11 HN 0.93 KP 0.94 ! LA 1.06 MK 0.91 NL 0.88 OV 0.90 ! PT 1.10 SC 0.93 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.073067Jy sigma=1.207949 ! Fit after self-cal, rms=0.072124Jy sigma=1.201876 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072124Jy sigma=1.201876 ! Fit after self-cal, rms=0.072124Jy sigma=1.201828 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.069 mas, bmaj=7.558 mas, bpa=-4.019 degrees ! Estimated noise=0.921918 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00135857 Jy ! Component: 100 - total flux cleaned = 0.00168808 Jy ! Component: 150 - total flux cleaned = 0.00185439 Jy ! Component: 200 - total flux cleaned = 0.00190455 Jy ! Total flux subtracted in 200 components = 0.00190455 Jy ! Clean residual min=-0.005533 max=0.005802 Jy/beam ! Clean residual mean=0.000046 rms=0.001519 Jy/beam ! Combined flux in latest and established models = 0.115314 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 35 components and 0.115314 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072079Jy sigma=1.200079 ! Fit after self-cal, rms=0.072076Jy sigma=1.200011 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072076Jy sigma=1.200011 ! Fit after self-cal, rms=0.067424Jy sigma=1.105635 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00162896 Jy ! Component: 100 - total flux cleaned = 0.0013677 Jy ! Component: 150 - total flux cleaned = 0.0012179 Jy ! Component: 200 - total flux cleaned = 0.00108456 Jy ! Total flux subtracted in 200 components = 0.00108456 Jy ! Clean residual min=-0.004784 max=0.005262 Jy/beam ! Clean residual mean=0.000039 rms=0.001409 Jy/beam ! Combined flux in latest and established models = 0.116399 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 43 components and 0.116399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067227Jy sigma=1.103149 ! Fit after self-cal, rms=0.066631Jy sigma=1.093101 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.069 x 7.558 at -4.019 degrees (North through East) ! Clean map min=-0.0044899 max=0.10249 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066631Jy sigma=1.093101 ! Fit after self-cal, rms=0.065632Jy sigma=1.087717 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065632Jy sigma=1.087717 ! Fit after self-cal, rms=0.065521Jy sigma=1.086071 ! Inverting map and beam ! Estimated beam: bmin=3.058 mas, bmaj=7.565 mas, bpa=-4.357 degrees ! Estimated noise=0.904154 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00154439 Jy ! Component: 100 - total flux cleaned = -0.00179422 Jy ! Component: 150 - total flux cleaned = -0.00193841 Jy ! Component: 200 - total flux cleaned = -0.00203759 Jy ! Total flux subtracted in 200 components = -0.00203759 Jy ! Clean residual min=-0.004528 max=0.005010 Jy/beam ! Clean residual mean=0.000034 rms=0.001294 Jy/beam ! Combined flux in latest and established models = 0.114361 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 46 components and 0.114361 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065567Jy sigma=1.085310 ! Fit after self-cal, rms=0.065524Jy sigma=1.084847 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065524Jy sigma=1.084847 ! Fit after self-cal, rms=0.065471Jy sigma=1.083581 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065471Jy sigma=1.083581 ! Fit after self-cal, rms=0.065462Jy sigma=1.083426 ! Inverting map and beam ! Estimated beam: bmin=3.059 mas, bmaj=7.573 mas, bpa=-4.429 degrees ! Estimated noise=0.90205 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000244229 Jy ! Component: 100 - total flux cleaned = -0.000316657 Jy ! Component: 150 - total flux cleaned = -0.000316198 Jy ! Component: 200 - total flux cleaned = -0.00031653 Jy ! Total flux subtracted in 200 components = -0.00031653 Jy ! Clean residual min=-0.004495 max=0.004983 Jy/beam ! Clean residual mean=0.000032 rms=0.001280 Jy/beam ! Combined flux in latest and established models = 0.114044 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 48 components and 0.114044 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065474Jy sigma=1.083136 ! Fit after self-cal, rms=0.065468Jy sigma=1.083048 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.464 mas, bmaj=13.31 mas, bpa=-1.136 degrees ! Estimated noise=1.18722 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00191746 Jy ! Component: 100 - total flux cleaned = 0.00211139 Jy ! Component: 150 - total flux cleaned = 0.0022801 Jy ! Component: 200 - total flux cleaned = 0.00247478 Jy ! Total flux subtracted in 200 components = 0.00247478 Jy ! Clean residual min=-0.004667 max=0.004209 Jy/beam ! Clean residual mean=0.000059 rms=0.001582 Jy/beam ! Combined flux in latest and established models = 0.116519 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 6 model components to the UV plane model. ! The established model now contains 50 components and 0.116519 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065549Jy sigma=1.083980 ! Fit after self-cal, rms=0.065540Jy sigma=1.083687 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.574 mas, bmaj=6.554 mas, bpa=-3.501 degrees ! Estimated noise=1.17927 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.089664 Jy ! Component: 100 - total flux cleaned = 0.104553 Jy ! Component: 150 - total flux cleaned = 0.110672 Jy ! Component: 200 - total flux cleaned = 0.112772 Jy ! Total flux subtracted in 200 components = 0.112772 Jy ! Clean residual min=-0.005632 max=0.006006 Jy/beam ! Clean residual mean=0.000007 rms=0.001456 Jy/beam ! Combined flux in latest and established models = 0.112772 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.112772 Jy ! Inverting map and beam ! Estimated beam: bmin=3.059 mas, bmaj=7.573 mas, bpa=-4.429 degrees ! Estimated noise=0.90205 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -3.03622e-06 Jy ! Component: 100 - total flux cleaned = 0.000525821 Jy ! Component: 150 - total flux cleaned = 0.000726058 Jy ! Component: 200 - total flux cleaned = 0.000726335 Jy ! Total flux subtracted in 200 components = 0.000726335 Jy ! Clean residual min=-0.004746 max=0.005367 Jy/beam ! Clean residual mean=0.000035 rms=0.001343 Jy/beam ! Combined flux in latest and established models = 0.113498 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 34 components and 0.113498 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.464 mas, bmaj=13.31 mas, bpa=-1.136 degrees ! Estimated noise=1.18722 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00216822 Jy ! Component: 100 - total flux cleaned = 0.00250886 Jy ! Component: 150 - total flux cleaned = 0.00272462 Jy ! Component: 200 - total flux cleaned = 0.00290956 Jy ! Total flux subtracted in 200 components = 0.00290956 Jy ! Clean residual min=-0.004714 max=0.004371 Jy/beam ! Clean residual mean=0.000062 rms=0.001605 Jy/beam ! Combined flux in latest and established models = 0.116408 Jy ! Adding 5 model components to the UV plane model. ! The established model now contains 38 components and 0.116408 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.059 mas, bmaj=7.573 mas, bpa=-4.429 degrees ! Estimated noise=0.90205 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00152888 Jy ! Component: 100 - total flux cleaned = -0.00167513 Jy ! Component: 150 - total flux cleaned = -0.00188506 Jy ! Component: 200 - total flux cleaned = -0.00201599 Jy ! Total flux subtracted in 200 components = -0.00201599 Jy ! Clean residual min=-0.004538 max=0.005239 Jy/beam ! Clean residual mean=0.000032 rms=0.001274 Jy/beam ! Combined flux in latest and established models = 0.114392 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 49 components and 0.114392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065480Jy sigma=1.082973 ! Fit after self-cal, rms=0.065485Jy sigma=1.082846 wmodel J0335-0709_S_2005_07_08_yyk\_map.mod ! Writing 49 model components to file: J0335-0709_S_2005_07_08_yyk_map.mod wobs J0335-0709_S_2005_07_08_yyk\_uvs.fits ! Writing UV FITS file: J0335-0709_S_2005_07_08_yyk_uvs.fits wwins J0335-0709_S_2005_07_08_yyk\_map.win ! wwins: Wrote 1 windows to J0335-0709_S_2005_07_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000186503 Jy ! Component: 100 - total flux cleaned = -0.000349862 Jy ! Component: 150 - total flux cleaned = -0.000640195 Jy ! Component: 200 - total flux cleaned = -0.000916315 Jy ! Component: 250 - total flux cleaned = -0.00117846 Jy ! Component: 300 - total flux cleaned = -0.00136803 Jy ! Component: 350 - total flux cleaned = -0.0016099 Jy ! Component: 400 - total flux cleaned = -0.00172924 Jy ! Component: 450 - total flux cleaned = -0.00212144 Jy ! Component: 500 - total flux cleaned = -0.00239087 Jy ! Component: 550 - total flux cleaned = -0.00259831 Jy ! Component: 600 - total flux cleaned = -0.00264977 Jy ! Component: 650 - total flux cleaned = -0.00275027 Jy ! Component: 700 - total flux cleaned = -0.00299105 Jy ! Component: 750 - total flux cleaned = -0.00303797 Jy ! Component: 800 - total flux cleaned = -0.00322048 Jy ! Component: 850 - total flux cleaned = -0.00326476 Jy ! Component: 900 - total flux cleaned = -0.00348283 Jy ! Component: 950 - total flux cleaned = -0.00361208 Jy ! Component: 1000 - total flux cleaned = -0.00373696 Jy ! Component: 1050 - total flux cleaned = -0.00373741 Jy ! Component: 1100 - total flux cleaned = -0.00377842 Jy ! Component: 1150 - total flux cleaned = -0.0038174 Jy ! Component: 1200 - total flux cleaned = -0.00393213 Jy ! Component: 1250 - total flux cleaned = -0.00389396 Jy ! Component: 1300 - total flux cleaned = -0.00389407 Jy ! Component: 1350 - total flux cleaned = -0.00378415 Jy ! Component: 1400 - total flux cleaned = -0.00389275 Jy ! Component: 1450 - total flux cleaned = -0.00392831 Jy ! Component: 1500 - total flux cleaned = -0.00392834 Jy ! Component: 1550 - total flux cleaned = -0.00399586 Jy ! Component: 1600 - total flux cleaned = -0.00396077 Jy ! Component: 1650 - total flux cleaned = -0.00392818 Jy ! Component: 1700 - total flux cleaned = -0.00396138 Jy ! Component: 1750 - total flux cleaned = -0.00396151 Jy ! Component: 1800 - total flux cleaned = -0.00389766 Jy ! Component: 1850 - total flux cleaned = -0.00402484 Jy ! Component: 1900 - total flux cleaned = -0.00411828 Jy ! Component: 1950 - total flux cleaned = -0.0040873 Jy ! Component: 2000 - total flux cleaned = -0.00408749 Jy ! Total flux subtracted in 2048 components = -0.0041482 Jy ! Clean residual min=-0.001799 max=0.001626 Jy/beam ! Clean residual mean=0.000000 rms=0.000624 Jy/beam ! Combined flux in latest and established models = 0.110244 Jy keep ! Adding 153 model components to the UV plane model. ! The established model now contains 202 components and 0.110244 Jy ![Exited script file: muppet] wmap "J0335-0709_S_2005_07_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.059 x 7.573 at -4.429 degrees (North through East) ! Clean map min=-0.0028885 max=0.1006 Jy/beam ! Writing clean map to FITS file: J0335-0709_S_2005_07_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.1006 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000622444 device "J0335-0709_S_2005_07_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J0335-0709_S_2005_07_08_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.8562 1.8562 3.71241 7.42481 14.8496 29.6993 59.3985 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.1 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.059 x 7.573 at -4.429 degrees (North through East) ! Clean map min=-0.0028885 max=0.1006 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0335-0709_S_2005_07_08_yyk\_map.gif/gif" ! Attempting to open device: 'J0335-0709_S_2005_07_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0335-0709_S_2005_07_08_yyk_uvs.log closed on Fri Jan 20 09:51:12 2006