! Started logfile: J0202-1948_S_2005_07_08_yyk_uvs.log on Fri Jan 20 09:46:48 2006 obs J0202-1948_S_2005_07_08_yyk_uve.fits ! Reading UV FITS file: J0202-1948_S_2005_07_08_yyk_uve.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J0202-1948 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1412 lines of history. ! ! Reading 1800 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0202-1948_S_2005_07_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.209008 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.461 mas, bmaj=6.688 mas, bpa=-2.858 degrees ! Estimated noise=1.37611 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.16362 Jy ! Component: 100 - total flux cleaned = 0.18664 Jy ! Total flux subtracted in 100 components = 0.18664 Jy ! Clean residual min=-0.006998 max=0.006595 Jy/beam ! Clean residual mean=0.000058 rms=0.001883 Jy/beam ! Combined flux in latest and established models = 0.18664 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.18664 Jy ! ! Correcting IF 1. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.078022Jy sigma=1.193113 ! Fit after self-cal, rms=0.078014Jy sigma=1.179253 ! Inverting map and beam ! Estimated beam: bmin=2.461 mas, bmaj=6.688 mas, bpa=-2.858 degrees ! Estimated noise=1.37611 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.08 mas, bmaj=7.925 mas, bpa=-4.157 degrees ! Estimated noise=1.00374 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00859239 Jy ! Component: 100 - total flux cleaned = 0.0117774 Jy ! Component: 150 - total flux cleaned = 0.0122847 Jy ! Component: 200 - total flux cleaned = 0.012782 Jy ! Total flux subtracted in 200 components = 0.012782 Jy ! Clean residual min=-0.006520 max=0.007597 Jy/beam ! Clean residual mean=0.000064 rms=0.002195 Jy/beam ! Combined flux in latest and established models = 0.199422 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 31 components and 0.199422 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077029Jy sigma=1.167109 ! Fit after self-cal, rms=0.077033Jy sigma=1.167056 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.08 x 7.925 at -4.157 degrees (North through East) ! Clean map min=-0.0063179 max=0.18488 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.04566 ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 0.98 HN 0.99 KP 0.91 ! LA 1.04 MK 0.90 NL 0.99 OV 0.95 ! PT 1.00 SC 0.91 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.990988 ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.00 HN 1.14 KP 0.98 ! LA 1.03 MK 0.96 NL 1.04 OV 1.01 ! PT 1.05 SC 0.96 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.077033Jy sigma=1.167056 ! Fit after self-cal, rms=0.076378Jy sigma=1.156799 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076378Jy sigma=1.156799 ! Fit after self-cal, rms=0.076367Jy sigma=1.156784 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.042 mas, bmaj=7.769 mas, bpa=-4.007 degrees ! Estimated noise=1.00185 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00231158 Jy ! Component: 100 - total flux cleaned = 0.00286406 Jy ! Component: 150 - total flux cleaned = 0.00337833 Jy ! Component: 200 - total flux cleaned = 0.0037961 Jy ! Total flux subtracted in 200 components = 0.0037961 Jy ! Clean residual min=-0.006526 max=0.007756 Jy/beam ! Clean residual mean=0.000096 rms=0.002164 Jy/beam ! Combined flux in latest and established models = 0.203218 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 38 components and 0.203218 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076235Jy sigma=1.153900 ! Fit after self-cal, rms=0.076239Jy sigma=1.153872 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076239Jy sigma=1.153872 ! Fit after self-cal, rms=0.073179Jy sigma=1.072231 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00238904 Jy ! Component: 100 - total flux cleaned = 0.00333209 Jy ! Component: 150 - total flux cleaned = 0.00349927 Jy ! Component: 200 - total flux cleaned = 0.00362104 Jy ! Total flux subtracted in 200 components = 0.00362104 Jy ! Clean residual min=-0.005709 max=0.007271 Jy/beam ! Clean residual mean=0.000098 rms=0.001968 Jy/beam ! Combined flux in latest and established models = 0.206839 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 41 components and 0.206839 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073021Jy sigma=1.071082 ! Fit after self-cal, rms=0.073046Jy sigma=1.065439 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.042 x 7.769 at -4.007 degrees (North through East) ! Clean map min=-0.005621 max=0.1833 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073046Jy sigma=1.065439 ! Fit after self-cal, rms=0.070541Jy sigma=1.036004 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070541Jy sigma=1.036004 ! Fit after self-cal, rms=0.070626Jy sigma=1.035220 ! Inverting map and beam ! Estimated beam: bmin=3.055 mas, bmaj=7.78 mas, bpa=-3.953 degrees ! Estimated noise=0.981558 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00261218 Jy ! Component: 100 - total flux cleaned = -0.00250288 Jy ! Component: 150 - total flux cleaned = -0.00249883 Jy ! Component: 200 - total flux cleaned = -0.00246252 Jy ! Total flux subtracted in 200 components = -0.00246252 Jy ! Clean residual min=-0.005263 max=0.006020 Jy/beam ! Clean residual mean=0.000099 rms=0.001698 Jy/beam ! Combined flux in latest and established models = 0.204377 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 46 components and 0.204377 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070791Jy sigma=1.032908 ! Fit after self-cal, rms=0.070843Jy sigma=1.032766 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070843Jy sigma=1.032766 ! Fit after self-cal, rms=0.069826Jy sigma=1.021696 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069826Jy sigma=1.021696 ! Fit after self-cal, rms=0.069856Jy sigma=1.021519 ! Inverting map and beam ! Estimated beam: bmin=3.061 mas, bmaj=7.803 mas, bpa=-3.655 degrees ! Estimated noise=0.972116 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00202354 Jy ! Component: 100 - total flux cleaned = -0.00225652 Jy ! Component: 150 - total flux cleaned = -0.0022545 Jy ! Component: 200 - total flux cleaned = -0.00225284 Jy ! Total flux subtracted in 200 components = -0.00225284 Jy ! Clean residual min=-0.005110 max=0.005793 Jy/beam ! Clean residual mean=0.000096 rms=0.001614 Jy/beam ! Combined flux in latest and established models = 0.202124 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 53 components and 0.202124 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069974Jy sigma=1.020585 ! Fit after self-cal, rms=0.069989Jy sigma=1.020565 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.083 mas, bmaj=16.68 mas, bpa=2.337 degrees ! Estimated noise=1.26355 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00156145 Jy ! Component: 100 - total flux cleaned = 0.00169895 Jy ! Component: 150 - total flux cleaned = 0.0018157 Jy ! Component: 200 - total flux cleaned = 0.00201931 Jy ! Total flux subtracted in 200 components = 0.00201931 Jy ! Clean residual min=-0.005808 max=0.008102 Jy/beam ! Clean residual mean=0.000185 rms=0.002509 Jy/beam ! Combined flux in latest and established models = 0.204143 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 56 components and 0.204143 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070061Jy sigma=1.021376 ! Fit after self-cal, rms=0.070016Jy sigma=1.020702 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.449 mas, bmaj=6.625 mas, bpa=-2.698 degrees ! Estimated noise=1.3222 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.158321 Jy ! Component: 100 - total flux cleaned = 0.182322 Jy ! Component: 150 - total flux cleaned = 0.191552 Jy ! Component: 200 - total flux cleaned = 0.19652 Jy ! Total flux subtracted in 200 components = 0.19652 Jy ! Clean residual min=-0.005396 max=0.005895 Jy/beam ! Clean residual mean=0.000061 rms=0.001508 Jy/beam ! Combined flux in latest and established models = 0.19652 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.19652 Jy ! Inverting map and beam ! Estimated beam: bmin=3.061 mas, bmaj=7.803 mas, bpa=-3.655 degrees ! Estimated noise=0.972116 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00350087 Jy ! Component: 100 - total flux cleaned = 0.00390775 Jy ! Component: 150 - total flux cleaned = 0.00423046 Jy ! Component: 200 - total flux cleaned = 0.00448272 Jy ! Total flux subtracted in 200 components = 0.00448272 Jy ! Clean residual min=-0.005104 max=0.005925 Jy/beam ! Clean residual mean=0.000096 rms=0.001639 Jy/beam ! Combined flux in latest and established models = 0.201002 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 45 components and 0.201002 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.083 mas, bmaj=16.68 mas, bpa=2.337 degrees ! Estimated noise=1.26355 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00229317 Jy ! Component: 100 - total flux cleaned = 0.0024347 Jy ! Component: 150 - total flux cleaned = 0.00261469 Jy ! Component: 200 - total flux cleaned = 0.00276971 Jy ! Total flux subtracted in 200 components = 0.00276971 Jy ! Clean residual min=-0.005817 max=0.008147 Jy/beam ! Clean residual mean=0.000185 rms=0.002525 Jy/beam ! Combined flux in latest and established models = 0.203772 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 51 components and 0.203772 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.061 mas, bmaj=7.803 mas, bpa=-3.655 degrees ! Estimated noise=0.972116 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00174962 Jy ! Component: 100 - total flux cleaned = -0.00170228 Jy ! Component: 150 - total flux cleaned = -0.00165957 Jy ! Component: 200 - total flux cleaned = -0.00162521 Jy ! Total flux subtracted in 200 components = -0.00162521 Jy ! Clean residual min=-0.005116 max=0.005713 Jy/beam ! Clean residual mean=0.000096 rms=0.001610 Jy/beam ! Combined flux in latest and established models = 0.202147 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 61 components and 0.202147 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070061Jy sigma=1.020834 ! Fit after self-cal, rms=0.070064Jy sigma=1.020787 wmodel J0202-1948_S_2005_07_08_yyk\_map.mod ! Writing 61 model components to file: J0202-1948_S_2005_07_08_yyk_map.mod wobs J0202-1948_S_2005_07_08_yyk\_uvs.fits ! Writing UV FITS file: J0202-1948_S_2005_07_08_yyk_uvs.fits wwins J0202-1948_S_2005_07_08_yyk\_map.win ! wwins: Wrote 1 windows to J0202-1948_S_2005_07_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00242071 Jy ! Component: 100 - total flux cleaned = 0.00418303 Jy ! Component: 150 - total flux cleaned = 0.00580831 Jy ! Component: 200 - total flux cleaned = 0.00676806 Jy ! Component: 250 - total flux cleaned = 0.00730275 Jy ! Component: 300 - total flux cleaned = 0.00781471 Jy ! Component: 350 - total flux cleaned = 0.00823689 Jy ! Component: 400 - total flux cleaned = 0.00884337 Jy ! Component: 450 - total flux cleaned = 0.00936435 Jy ! Component: 500 - total flux cleaned = 0.00974226 Jy ! Component: 550 - total flux cleaned = 0.0102298 Jy ! Component: 600 - total flux cleaned = 0.0107037 Jy ! Component: 650 - total flux cleaned = 0.0111653 Jy ! Component: 700 - total flux cleaned = 0.0116688 Jy ! Component: 750 - total flux cleaned = 0.0121033 Jy ! Component: 800 - total flux cleaned = 0.0124222 Jy ! Component: 850 - total flux cleaned = 0.0129417 Jy ! Component: 900 - total flux cleaned = 0.0134494 Jy ! Component: 950 - total flux cleaned = 0.0136977 Jy ! Component: 1000 - total flux cleaned = 0.0140881 Jy ! Component: 1050 - total flux cleaned = 0.0142793 Jy ! Component: 1100 - total flux cleaned = 0.0145122 Jy ! Component: 1150 - total flux cleaned = 0.0143758 Jy ! Component: 1200 - total flux cleaned = 0.0146007 Jy ! Component: 1250 - total flux cleaned = 0.0147775 Jy ! Component: 1300 - total flux cleaned = 0.0148214 Jy ! Component: 1350 - total flux cleaned = 0.0149929 Jy ! Component: 1400 - total flux cleaned = 0.0151602 Jy ! Component: 1450 - total flux cleaned = 0.0154069 Jy ! Component: 1500 - total flux cleaned = 0.0153663 Jy ! Component: 1550 - total flux cleaned = 0.0155653 Jy ! Component: 1600 - total flux cleaned = 0.0154859 Jy ! Component: 1650 - total flux cleaned = 0.0154863 Jy ! Component: 1700 - total flux cleaned = 0.0156387 Jy ! Component: 1750 - total flux cleaned = 0.0156765 Jy ! Component: 1800 - total flux cleaned = 0.0157507 Jy ! Component: 1850 - total flux cleaned = 0.0157866 Jy ! Component: 1900 - total flux cleaned = 0.0157862 Jy ! Component: 1950 - total flux cleaned = 0.0158209 Jy ! Component: 2000 - total flux cleaned = 0.0157861 Jy ! Total flux subtracted in 2048 components = 0.0157863 Jy ! Clean residual min=-0.001939 max=0.001712 Jy/beam ! Clean residual mean=0.000016 rms=0.000747 Jy/beam ! Combined flux in latest and established models = 0.217933 Jy keep ! Adding 158 model components to the UV plane model. ! The established model now contains 219 components and 0.217933 Jy ![Exited script file: muppet] wmap "J0202-1948_S_2005_07_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.061 x 7.803 at -3.655 degrees (North through East) ! Clean map min=-0.0034881 max=0.17734 Jy/beam ! Writing clean map to FITS file: J0202-1948_S_2005_07_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.177339 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00074927 device "J0202-1948_S_2005_07_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J0202-1948_S_2005_07_08_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.26752 1.26752 2.53505 5.07009 10.1402 20.2804 40.5608 81.1215 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0022 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.177 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.061 x 7.803 at -3.655 degrees (North through East) ! Clean map min=-0.0034881 max=0.17734 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0202-1948_S_2005_07_08_yyk\_map.gif/gif" ! Attempting to open device: 'J0202-1948_S_2005_07_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0202-1948_S_2005_07_08_yyk_uvs.log closed on Fri Jan 20 09:46:52 2006