! Started logfile: J0200-1542_X_2005_07_20_yyk_uvs.log on Fri Jan 20 09:46:44 2006 obs J0200-1542_X_2005_07_20_yyk_uve.fits ! Reading UV FITS file: J0200-1542_X_2005_07_20_yyk_uve.fits ! AN table 1: 13 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.897436 visibilities/baseline/integration-bin. ! Found source: J0200-1542 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1488 lines of history. ! ! Reading 2100 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0200-1542_X_2005_07_20_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.136343 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6621 mas, bmaj=1.777 mas, bpa=-2.518 degrees ! Estimated noise=1.35397 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0868515 Jy ! Component: 100 - total flux cleaned = 0.111021 Jy ! Total flux subtracted in 100 components = 0.111021 Jy ! Clean residual min=-0.008981 max=0.014190 Jy/beam ! Clean residual mean=-0.000024 rms=0.002689 Jy/beam ! Combined flux in latest and established models = 0.111021 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.111021 Jy ! ! Correcting IF 1. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.085785Jy sigma=1.225200 ! Fit after self-cal, rms=0.078625Jy sigma=1.119650 ! Inverting map and beam ! Estimated beam: bmin=0.6621 mas, bmaj=1.777 mas, bpa=-2.518 degrees ! Estimated noise=1.35397 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8538 mas, bmaj=2.204 mas, bpa=-1.704 degrees ! Estimated noise=0.930517 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0170632 Jy ! Component: 100 - total flux cleaned = 0.0205683 Jy ! Component: 150 - total flux cleaned = 0.020825 Jy ! Component: 200 - total flux cleaned = 0.0208188 Jy ! Total flux subtracted in 200 components = 0.0208188 Jy ! Clean residual min=-0.004787 max=0.006665 Jy/beam ! Clean residual mean=0.000019 rms=0.001413 Jy/beam ! Combined flux in latest and established models = 0.131839 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 22 components and 0.131839 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077378Jy sigma=1.066025 ! Fit after self-cal, rms=0.077339Jy sigma=1.065747 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8538 x 2.204 at -1.704 degrees (North through East) ! Clean map min=-0.0043515 max=0.11538 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00835 ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.97 HN 1.07 KP 0.85 ! LA 0.94 MK 1.02 NL 1.04 OV 0.95 ! PT 1.16 SC 1.02 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.077339Jy sigma=1.065747 ! Fit after self-cal, rms=0.077098Jy sigma=1.055363 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077098Jy sigma=1.055363 ! Fit after self-cal, rms=0.077100Jy sigma=1.055340 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8636 mas, bmaj=2.212 mas, bpa=-1.54 degrees ! Estimated noise=0.925794 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000702318 Jy ! Component: 100 - total flux cleaned = -0.000959856 Jy ! Component: 150 - total flux cleaned = -0.00104922 Jy ! Component: 200 - total flux cleaned = -0.00104736 Jy ! Total flux subtracted in 200 components = -0.00104736 Jy ! Clean residual min=-0.004182 max=0.005548 Jy/beam ! Clean residual mean=0.000010 rms=0.001197 Jy/beam ! Combined flux in latest and established models = 0.130792 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 27 components and 0.130792 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077046Jy sigma=1.054278 ! Fit after self-cal, rms=0.077030Jy sigma=1.054166 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077030Jy sigma=1.054166 ! Fit after self-cal, rms=0.070478Jy sigma=0.982375 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-21.2, -13.8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00543383 Jy ! Component: 100 - total flux cleaned = 0.00726822 Jy ! Component: 150 - total flux cleaned = 0.00754638 Jy ! Component: 200 - total flux cleaned = 0.00766964 Jy ! Total flux subtracted in 200 components = 0.00766964 Jy ! Clean residual min=-0.003405 max=0.004373 Jy/beam ! Clean residual mean=0.000003 rms=0.001043 Jy/beam ! Combined flux in latest and established models = 0.138462 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 47 components and 0.138462 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070141Jy sigma=0.975345 ! Fit after self-cal, rms=0.069867Jy sigma=0.970924 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8636 x 2.212 at -1.54 degrees (North through East) ! Clean map min=-0.0031241 max=0.11683 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069867Jy sigma=0.970924 ! Fit after self-cal, rms=0.068445Jy sigma=0.964215 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068445Jy sigma=0.964215 ! Fit after self-cal, rms=0.068468Jy sigma=0.963862 ! Inverting map and beam ! Estimated beam: bmin=0.8622 mas, bmaj=2.205 mas, bpa=-1.397 degrees ! Estimated noise=0.913162 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 4.51104e-05 Jy ! Component: 100 - total flux cleaned = 0.000155389 Jy ! Component: 150 - total flux cleaned = 0.000252855 Jy ! Component: 200 - total flux cleaned = 0.000337379 Jy ! Total flux subtracted in 200 components = 0.000337379 Jy ! Clean residual min=-0.003229 max=0.003748 Jy/beam ! Clean residual mean=-0.000001 rms=0.000918 Jy/beam ! Combined flux in latest and established models = 0.138799 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 53 components and 0.138799 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068357Jy sigma=0.962435 ! Fit after self-cal, rms=0.068370Jy sigma=0.962300 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068370Jy sigma=0.962300 ! Fit after self-cal, rms=0.068535Jy sigma=0.959032 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068535Jy sigma=0.959032 ! Fit after self-cal, rms=0.068547Jy sigma=0.958937 ! Inverting map and beam ! Estimated beam: bmin=0.8503 mas, bmaj=2.173 mas, bpa=-0.7783 degrees ! Estimated noise=0.908967 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000510905 Jy ! Component: 100 - total flux cleaned = 0.000598393 Jy ! Component: 150 - total flux cleaned = 0.000683457 Jy ! Component: 200 - total flux cleaned = 0.000843667 Jy ! Total flux subtracted in 200 components = 0.000843667 Jy ! Clean residual min=-0.003134 max=0.003581 Jy/beam ! Clean residual mean=-0.000001 rms=0.000915 Jy/beam ! Combined flux in latest and established models = 0.139643 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 59 components and 0.139643 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068479Jy sigma=0.957946 ! Fit after self-cal, rms=0.068487Jy sigma=0.957893 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.327 mas, bmaj=4.745 mas, bpa=8.004 degrees ! Estimated noise=1.17621 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00115369 Jy ! Component: 100 - total flux cleaned = 0.00120447 Jy ! Component: 150 - total flux cleaned = 0.00116492 Jy ! Component: 200 - total flux cleaned = 0.0011306 Jy ! Total flux subtracted in 200 components = 0.0011306 Jy ! Clean residual min=-0.003694 max=0.004080 Jy/beam ! Clean residual mean=0.000002 rms=0.001222 Jy/beam ! Combined flux in latest and established models = 0.140773 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 64 components and 0.140773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068469Jy sigma=0.957759 ! Fit after self-cal, rms=0.068469Jy sigma=0.957644 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6597 mas, bmaj=1.766 mas, bpa=-2.252 degrees ! Estimated noise=1.32456 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0952 Jy ! Component: 100 - total flux cleaned = 0.116664 Jy ! Component: 150 - total flux cleaned = 0.126457 Jy ! Component: 200 - total flux cleaned = 0.13236 Jy ! Total flux subtracted in 200 components = 0.13236 Jy ! Clean residual min=-0.004978 max=0.006966 Jy/beam ! Clean residual mean=-0.000005 rms=0.001382 Jy/beam ! Combined flux in latest and established models = 0.13236 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.13236 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8503 mas, bmaj=2.173 mas, bpa=-0.7783 degrees ! Estimated noise=0.908967 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.8, 0.2). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00644632 Jy ! Component: 100 - total flux cleaned = 0.00751634 Jy ! Component: 150 - total flux cleaned = 0.00784351 Jy ! Component: 200 - total flux cleaned = 0.00812523 Jy ! Total flux subtracted in 200 components = 0.00812523 Jy ! Clean residual min=-0.003141 max=0.003942 Jy/beam ! Clean residual mean=0.000003 rms=0.000911 Jy/beam ! Combined flux in latest and established models = 0.140485 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 45 components and 0.140485 Jy ! Inverting map ! Added new window around map position (12.2, 5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00351958 Jy ! Component: 100 - total flux cleaned = 0.00425799 Jy ! Component: 150 - total flux cleaned = 0.00452209 Jy ! Component: 200 - total flux cleaned = 0.00458161 Jy ! Total flux subtracted in 200 components = 0.00458161 Jy ! Clean residual min=-0.003233 max=0.002846 Jy/beam ! Clean residual mean=0.000001 rms=0.000820 Jy/beam ! Combined flux in latest and established models = 0.145067 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 74 components and 0.145067 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.327 mas, bmaj=4.745 mas, bpa=8.004 degrees ! Estimated noise=1.17621 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000407847 Jy ! Component: 100 - total flux cleaned = -0.000510238 Jy ! Component: 150 - total flux cleaned = -0.000648982 Jy ! Component: 200 - total flux cleaned = -0.000771027 Jy ! Total flux subtracted in 200 components = -0.000771027 Jy ! Clean residual min=-0.004045 max=0.002879 Jy/beam ! Clean residual mean=-0.000003 rms=0.001083 Jy/beam ! Combined flux in latest and established models = 0.144296 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 86 components and 0.144296 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8503 mas, bmaj=2.173 mas, bpa=-0.7783 degrees ! Estimated noise=0.908967 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000604764 Jy ! Component: 100 - total flux cleaned = 0.000656396 Jy ! Component: 150 - total flux cleaned = 0.000702297 Jy ! Component: 200 - total flux cleaned = 0.000702811 Jy ! Total flux subtracted in 200 components = 0.000702811 Jy ! Clean residual min=-0.003406 max=0.002733 Jy/beam ! Clean residual mean=-0.000000 rms=0.000793 Jy/beam ! Combined flux in latest and established models = 0.144998 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 103 components and 0.144998 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067997Jy sigma=0.949348 ! Fit after self-cal, rms=0.067945Jy sigma=0.948405 wmodel J0200-1542_X_2005_07_20_yyk\_map.mod ! Writing 103 model components to file: J0200-1542_X_2005_07_20_yyk_map.mod wobs J0200-1542_X_2005_07_20_yyk\_uvs.fits ! Writing UV FITS file: J0200-1542_X_2005_07_20_yyk_uvs.fits wwins J0200-1542_X_2005_07_20_yyk\_map.win ! wwins: Wrote 4 windows to J0200-1542_X_2005_07_20_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00109886 Jy ! Component: 100 - total flux cleaned = -0.00161392 Jy ! Component: 150 - total flux cleaned = -0.0019533 Jy ! Component: 200 - total flux cleaned = -0.00245967 Jy ! Component: 250 - total flux cleaned = -0.00268288 Jy ! Component: 300 - total flux cleaned = -0.00285544 Jy ! Component: 350 - total flux cleaned = -0.00285616 Jy ! Component: 400 - total flux cleaned = -0.00289731 Jy ! Component: 450 - total flux cleaned = -0.00281821 Jy ! Component: 500 - total flux cleaned = -0.00289628 Jy ! Component: 550 - total flux cleaned = -0.00297214 Jy ! Component: 600 - total flux cleaned = -0.00315672 Jy ! Component: 650 - total flux cleaned = -0.00315681 Jy ! Component: 700 - total flux cleaned = -0.00329906 Jy ! Component: 750 - total flux cleaned = -0.00340284 Jy ! Component: 800 - total flux cleaned = -0.00347046 Jy ! Component: 850 - total flux cleaned = -0.00353677 Jy ! Component: 900 - total flux cleaned = -0.00356941 Jy ! Component: 950 - total flux cleaned = -0.00356922 Jy ! Component: 1000 - total flux cleaned = -0.00369553 Jy ! Component: 1050 - total flux cleaned = -0.0036946 Jy ! Component: 1100 - total flux cleaned = -0.00369396 Jy ! Component: 1150 - total flux cleaned = -0.00372413 Jy ! Component: 1200 - total flux cleaned = -0.00375345 Jy ! Component: 1250 - total flux cleaned = -0.00381158 Jy ! Component: 1300 - total flux cleaned = -0.00392695 Jy ! Component: 1350 - total flux cleaned = -0.00395548 Jy ! Component: 1400 - total flux cleaned = -0.00406784 Jy ! Component: 1450 - total flux cleaned = -0.00406767 Jy ! Component: 1500 - total flux cleaned = -0.00417803 Jy ! Component: 1550 - total flux cleaned = -0.00428633 Jy ! Component: 1600 - total flux cleaned = -0.0045007 Jy ! Component: 1650 - total flux cleaned = -0.00458 Jy ! Component: 1700 - total flux cleaned = -0.00457991 Jy ! Component: 1750 - total flux cleaned = -0.00463182 Jy ! Component: 1800 - total flux cleaned = -0.0046831 Jy ! Component: 1850 - total flux cleaned = -0.00480982 Jy ! Component: 1900 - total flux cleaned = -0.00486003 Jy ! Component: 1950 - total flux cleaned = -0.00486026 Jy ! Component: 2000 - total flux cleaned = -0.00498354 Jy ! Total flux subtracted in 2048 components = -0.00491015 Jy ! Clean residual min=-0.001381 max=0.001960 Jy/beam ! Clean residual mean=0.000006 rms=0.000476 Jy/beam ! Combined flux in latest and established models = 0.140088 Jy keep ! Adding 135 model components to the UV plane model. ! The established model now contains 238 components and 0.140088 Jy ![Exited script file: muppet] wmap "J0200-1542_X_2005_07_20_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8503 x 2.173 at -0.7783 degrees (North through East) ! Clean map min=-0.0030626 max=0.11364 Jy/beam ! Writing clean map to FITS file: J0200-1542_X_2005_07_20_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.113644 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000469682 device "J0200-1542_X_2005_07_20_yyk\_map.eps/VPS" ! Attempting to open device: 'J0200-1542_X_2005_07_20_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.23988 1.23988 2.47977 4.95953 9.91906 19.8381 39.6762 79.3525 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.113 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8503 x 2.173 at -0.7783 degrees (North through East) ! Clean map min=-0.0030626 max=0.11364 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0200-1542_X_2005_07_20_yyk\_map.gif/gif" ! Attempting to open device: 'J0200-1542_X_2005_07_20_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0200-1542_X_2005_07_20_yyk_uvs.log closed on Fri Jan 20 09:46:48 2006