! Started logfile: J0155-1443_S_2005_07_09_yyk_uvs.log on Fri Jan 20 09:46:11 2006 obs J0155-1443_S_2005_07_09_yyk_uve.fits ! Reading UV FITS file: J0155-1443_S_2005_07_09_yyk_uve.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.882222 visibilities/baseline/integration-bin. ! Found source: J0155-1443 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1602 lines of history. ! ! Reading 1588 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0155-1443_S_2005_07_09_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.130072 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.33 mas, bmaj=6.84 mas, bpa=-0.5302 degrees ! Estimated noise=1.63501 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0978252 Jy ! Component: 100 - total flux cleaned = 0.113691 Jy ! Total flux subtracted in 100 components = 0.113691 Jy ! Clean residual min=-0.007051 max=0.007238 Jy/beam ! Clean residual mean=-0.000058 rms=0.001912 Jy/beam ! Combined flux in latest and established models = 0.113691 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.113691 Jy ! ! Correcting IF 1. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.059360Jy sigma=1.002112 ! Fit after self-cal, rms=0.059009Jy sigma=0.995105 ! Inverting map and beam ! Estimated beam: bmin=2.33 mas, bmaj=6.84 mas, bpa=-0.5302 degrees ! Estimated noise=1.63501 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.961 mas, bmaj=8.363 mas, bpa=-3.274 degrees ! Estimated noise=1.14615 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00601857 Jy ! Component: 100 - total flux cleaned = 0.00750219 Jy ! Component: 150 - total flux cleaned = 0.00750108 Jy ! Component: 200 - total flux cleaned = 0.00745055 Jy ! Total flux subtracted in 200 components = 0.00745055 Jy ! Clean residual min=-0.004467 max=0.004121 Jy/beam ! Clean residual mean=-0.000086 rms=0.001185 Jy/beam ! Combined flux in latest and established models = 0.121142 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 32 components and 0.121142 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058424Jy sigma=0.986792 ! Fit after self-cal, rms=0.058417Jy sigma=0.986673 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.961 x 8.363 at -3.274 degrees (North through East) ! Clean map min=-0.0042429 max=0.11364 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01673 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.12 HN 0.92 KP 0.95 ! LA 1.02 MK 0.89 NL 0.89 OV 0.97 ! PT 1.08 SC 1.01 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.982914 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 0.96 KP 0.95 ! LA 1.16 MK 0.93 NL 0.91 OV 1.08 ! PT 1.15 SC 0.96 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.990308 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.93 HN 1.07 KP 1.00 ! LA 0.89 MK 1.20 NL 1.00 OV 0.99 ! PT 1.09 SC 0.94 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.058417Jy sigma=0.986673 ! Fit after self-cal, rms=0.056962Jy sigma=0.963500 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056962Jy sigma=0.963500 ! Fit after self-cal, rms=0.056960Jy sigma=0.963345 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.925 mas, bmaj=8.214 mas, bpa=-2.813 degrees ! Estimated noise=1.14945 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00236296 Jy ! Component: 100 - total flux cleaned = 0.00290849 Jy ! Component: 150 - total flux cleaned = 0.00304111 Jy ! Component: 200 - total flux cleaned = 0.00313055 Jy ! Total flux subtracted in 200 components = 0.00313055 Jy ! Clean residual min=-0.003433 max=0.003310 Jy/beam ! Clean residual mean=0.000004 rms=0.000964 Jy/beam ! Combined flux in latest and established models = 0.124272 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 43 components and 0.124272 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056844Jy sigma=0.961953 ! Fit after self-cal, rms=0.056828Jy sigma=0.961773 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056828Jy sigma=0.961773 ! Fit after self-cal, rms=0.053964Jy sigma=0.917129 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103434 Jy ! Component: 100 - total flux cleaned = 0.00114417 Jy ! Component: 150 - total flux cleaned = 0.00125593 Jy ! Component: 200 - total flux cleaned = 0.00129579 Jy ! Total flux subtracted in 200 components = 0.00129579 Jy ! Clean residual min=-0.003544 max=0.003362 Jy/beam ! Clean residual mean=0.000002 rms=0.000940 Jy/beam ! Combined flux in latest and established models = 0.125568 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 50 components and 0.125568 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053926Jy sigma=0.916650 ! Fit after self-cal, rms=0.053700Jy sigma=0.913459 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.925 x 8.214 at -2.813 degrees (North through East) ! Clean map min=-0.0035766 max=0.11459 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053700Jy sigma=0.913459 ! Fit after self-cal, rms=0.054129Jy sigma=0.905508 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054129Jy sigma=0.905508 ! Fit after self-cal, rms=0.054118Jy sigma=0.905096 ! Inverting map and beam ! Estimated beam: bmin=2.893 mas, bmaj=8.132 mas, bpa=-2.745 degrees ! Estimated noise=1.16758 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00259738 Jy ! Component: 100 - total flux cleaned = 0.00350669 Jy ! Component: 150 - total flux cleaned = 0.00359001 Jy ! Component: 200 - total flux cleaned = 0.00360818 Jy ! Total flux subtracted in 200 components = 0.00360818 Jy ! Clean residual min=-0.003638 max=0.003625 Jy/beam ! Clean residual mean=0.000008 rms=0.000941 Jy/beam ! Combined flux in latest and established models = 0.129176 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 55 components and 0.129176 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053999Jy sigma=0.903495 ! Fit after self-cal, rms=0.053996Jy sigma=0.903400 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053996Jy sigma=0.903400 ! Fit after self-cal, rms=0.054325Jy sigma=0.893296 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054325Jy sigma=0.893296 ! Fit after self-cal, rms=0.054333Jy sigma=0.893188 ! Inverting map and beam ! Estimated beam: bmin=2.868 mas, bmaj=8.053 mas, bpa=-2.489 degrees ! Estimated noise=1.18057 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00211188 Jy ! Component: 100 - total flux cleaned = 0.00294071 Jy ! Component: 150 - total flux cleaned = 0.00303981 Jy ! Component: 200 - total flux cleaned = 0.00309299 Jy ! Total flux subtracted in 200 components = 0.00309299 Jy ! Clean residual min=-0.003619 max=0.003925 Jy/beam ! Clean residual mean=0.000016 rms=0.000966 Jy/beam ! Combined flux in latest and established models = 0.132269 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 61 components and 0.132269 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054239Jy sigma=0.892097 ! Fit after self-cal, rms=0.054238Jy sigma=0.892054 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.958 mas, bmaj=19.58 mas, bpa=-2.747 degrees ! Estimated noise=1.56812 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000411691 Jy ! Component: 100 - total flux cleaned = 0.0004115 Jy ! Component: 150 - total flux cleaned = 0.000412204 Jy ! Component: 200 - total flux cleaned = 0.000412931 Jy ! Total flux subtracted in 200 components = 0.000412931 Jy ! Clean residual min=-0.003798 max=0.003153 Jy/beam ! Clean residual mean=0.000031 rms=0.001063 Jy/beam ! Combined flux in latest and established models = 0.132682 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 65 components and 0.132682 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054230Jy sigma=0.892162 ! Fit after self-cal, rms=0.054220Jy sigma=0.892032 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.299 mas, bmaj=6.768 mas, bpa=-0.4579 degrees ! Estimated noise=1.64724 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.099927 Jy ! Component: 100 - total flux cleaned = 0.11807 Jy ! Component: 150 - total flux cleaned = 0.126138 Jy ! Component: 200 - total flux cleaned = 0.130498 Jy ! Total flux subtracted in 200 components = 0.130498 Jy ! Clean residual min=-0.005734 max=0.005998 Jy/beam ! Clean residual mean=-0.000005 rms=0.001546 Jy/beam ! Combined flux in latest and established models = 0.130498 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 36 model components to the UV plane model. ! The established model now contains 36 components and 0.130498 Jy ! Inverting map and beam ! Estimated beam: bmin=2.868 mas, bmaj=8.053 mas, bpa=-2.489 degrees ! Estimated noise=1.18057 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6, -14.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00312183 Jy ! Component: 100 - total flux cleaned = 0.00370328 Jy ! Component: 150 - total flux cleaned = 0.00385131 Jy ! Component: 200 - total flux cleaned = 0.00413135 Jy ! Total flux subtracted in 200 components = 0.00413135 Jy ! Clean residual min=-0.003101 max=0.003227 Jy/beam ! Clean residual mean=0.000007 rms=0.000934 Jy/beam ! Combined flux in latest and established models = 0.134629 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 57 components and 0.134629 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.958 mas, bmaj=19.58 mas, bpa=-2.747 degrees ! Estimated noise=1.56812 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000418612 Jy ! Component: 100 - total flux cleaned = -0.000482214 Jy ! Component: 150 - total flux cleaned = -0.000562201 Jy ! Component: 200 - total flux cleaned = -0.00063112 Jy ! Total flux subtracted in 200 components = -0.00063112 Jy ! Clean residual min=-0.003533 max=0.003297 Jy/beam ! Clean residual mean=0.000024 rms=0.001070 Jy/beam ! Combined flux in latest and established models = 0.133998 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 73 components and 0.133998 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.868 mas, bmaj=8.053 mas, bpa=-2.489 degrees ! Estimated noise=1.18057 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00016445 Jy ! Component: 100 - total flux cleaned = 0.000338755 Jy ! Component: 150 - total flux cleaned = 0.000439508 Jy ! Component: 200 - total flux cleaned = 0.000485263 Jy ! Total flux subtracted in 200 components = 0.000485263 Jy ! Clean residual min=-0.003058 max=0.003256 Jy/beam ! Clean residual mean=0.000009 rms=0.000917 Jy/beam ! Combined flux in latest and established models = 0.134483 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 92 components and 0.134483 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053841Jy sigma=0.885806 ! Fit after self-cal, rms=0.053821Jy sigma=0.885334 wmodel J0155-1443_S_2005_07_09_yyk\_map.mod ! Writing 92 model components to file: J0155-1443_S_2005_07_09_yyk_map.mod wobs J0155-1443_S_2005_07_09_yyk\_uvs.fits ! Writing UV FITS file: J0155-1443_S_2005_07_09_yyk_uvs.fits wwins J0155-1443_S_2005_07_09_yyk\_map.win ! wwins: Wrote 2 windows to J0155-1443_S_2005_07_09_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000240825 Jy ! Component: 100 - total flux cleaned = 2.68354e-05 Jy ! Component: 150 - total flux cleaned = -0.000175917 Jy ! Component: 200 - total flux cleaned = -0.000369445 Jy ! Component: 250 - total flux cleaned = -0.000648963 Jy ! Component: 300 - total flux cleaned = -0.00100934 Jy ! Component: 350 - total flux cleaned = -0.00135772 Jy ! Component: 400 - total flux cleaned = -0.00148485 Jy ! Component: 450 - total flux cleaned = -0.00160954 Jy ! Component: 500 - total flux cleaned = -0.00181118 Jy ! Component: 550 - total flux cleaned = -0.00188883 Jy ! Component: 600 - total flux cleaned = -0.00196573 Jy ! Component: 650 - total flux cleaned = -0.00215436 Jy ! Component: 700 - total flux cleaned = -0.00230196 Jy ! Component: 750 - total flux cleaned = -0.00244728 Jy ! Component: 800 - total flux cleaned = -0.00273091 Jy ! Component: 850 - total flux cleaned = -0.00280068 Jy ! Component: 900 - total flux cleaned = -0.00303971 Jy ! Component: 950 - total flux cleaned = -0.00327381 Jy ! Component: 1000 - total flux cleaned = -0.00333942 Jy ! Component: 1050 - total flux cleaned = -0.00350139 Jy ! Component: 1100 - total flux cleaned = -0.00369221 Jy ! Component: 1150 - total flux cleaned = -0.00378525 Jy ! Component: 1200 - total flux cleaned = -0.00381556 Jy ! Component: 1250 - total flux cleaned = -0.0038453 Jy ! Component: 1300 - total flux cleaned = -0.00378582 Jy ! Component: 1350 - total flux cleaned = -0.0038447 Jy ! Component: 1400 - total flux cleaned = -0.00390211 Jy ! Component: 1450 - total flux cleaned = -0.00395903 Jy ! Component: 1500 - total flux cleaned = -0.00401496 Jy ! Component: 1550 - total flux cleaned = -0.00404275 Jy ! Component: 1600 - total flux cleaned = -0.0040972 Jy ! Component: 1650 - total flux cleaned = -0.00420482 Jy ! Component: 1700 - total flux cleaned = -0.0042312 Jy ! Component: 1750 - total flux cleaned = -0.00428408 Jy ! Component: 1800 - total flux cleaned = -0.00436243 Jy ! Component: 1850 - total flux cleaned = -0.00449062 Jy ! Component: 1900 - total flux cleaned = -0.00456646 Jy ! Component: 1950 - total flux cleaned = -0.00466641 Jy ! Component: 2000 - total flux cleaned = -0.0047156 Jy ! Total flux subtracted in 2048 components = -0.0047888 Jy ! Clean residual min=-0.001430 max=0.001463 Jy/beam ! Clean residual mean=-0.000017 rms=0.000498 Jy/beam ! Combined flux in latest and established models = 0.129695 Jy keep ! Adding 121 model components to the UV plane model. ! The established model now contains 213 components and 0.129694 Jy ![Exited script file: muppet] wmap "J0155-1443_S_2005_07_09_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.868 x 8.053 at -2.489 degrees (North through East) ! Clean map min=-0.0027463 max=0.11516 Jy/beam ! Writing clean map to FITS file: J0155-1443_S_2005_07_09_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.115161 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00049443 device "J0155-1443_S_2005_07_09_yyk\_map.eps/VPS" ! Attempting to open device: 'J0155-1443_S_2005_07_09_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.28801 1.28801 2.57602 5.15204 10.3041 20.6082 41.2163 82.4326 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.115 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.868 x 8.053 at -2.489 degrees (North through East) ! Clean map min=-0.0027463 max=0.11516 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0155-1443_S_2005_07_09_yyk\_map.gif/gif" ! Attempting to open device: 'J0155-1443_S_2005_07_09_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0155-1443_S_2005_07_09_yyk_uvs.log closed on Fri Jan 20 09:46:15 2006