! Started logfile: J0152-2942_S_2005_07_08_yyk_uvs.log on Fri Jan 20 09:46:02 2006 obs J0152-2942_S_2005_07_08_yyk_uve.fits ! Reading UV FITS file: J0152-2942_S_2005_07_08_yyk_uve.fits ! AN table 1: 11 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.848485 visibilities/baseline/integration-bin. ! Found source: J0152-2942 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1412 lines of history. ! ! Reading 1680 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0152-2942_S_2005_07_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.156436 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.937 mas, bmaj=8.09 mas, bpa=7.067 degrees ! Estimated noise=2.29392 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0829748 Jy ! Component: 100 - total flux cleaned = 0.112086 Jy ! Total flux subtracted in 100 components = 0.112086 Jy ! Clean residual min=-0.011781 max=0.011815 Jy/beam ! Clean residual mean=-0.000119 rms=0.003408 Jy/beam ! Combined flux in latest and established models = 0.112086 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.112086 Jy ! ! Correcting IF 1. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.114107Jy sigma=1.291543 ! Fit after self-cal, rms=0.109965Jy sigma=1.224431 ! Inverting map and beam ! Estimated beam: bmin=2.937 mas, bmaj=8.09 mas, bpa=7.067 degrees ! Estimated noise=2.29392 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.912 mas, bmaj=10.81 mas, bpa=6.527 degrees ! Estimated noise=1.3747 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0310575 Jy ! Component: 100 - total flux cleaned = 0.0410971 Jy ! Component: 150 - total flux cleaned = 0.0448729 Jy ! Component: 200 - total flux cleaned = 0.0457362 Jy ! Total flux subtracted in 200 components = 0.0457362 Jy ! Clean residual min=-0.008523 max=0.007211 Jy/beam ! Clean residual mean=-0.000112 rms=0.002235 Jy/beam ! Combined flux in latest and established models = 0.157822 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 38 model components to the UV plane model. ! The established model now contains 54 components and 0.157822 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106593Jy sigma=1.127912 ! Fit after self-cal, rms=0.106551Jy sigma=1.127520 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.912 x 10.81 at 6.527 degrees (North through East) ! Clean map min=-0.0083025 max=0.10409 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.106551Jy sigma=1.127520 ! Fit after self-cal, rms=0.106551Jy sigma=1.127520 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106551Jy sigma=1.127520 ! Fit after self-cal, rms=0.106517Jy sigma=1.127237 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.912 mas, bmaj=10.81 mas, bpa=6.527 degrees ! Estimated noise=1.3747 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000420697 Jy ! Component: 100 - total flux cleaned = 0.000526348 Jy ! Component: 150 - total flux cleaned = 0.000617447 Jy ! Component: 200 - total flux cleaned = 0.000659608 Jy ! Total flux subtracted in 200 components = 0.000659608 Jy ! Clean residual min=-0.008505 max=0.007134 Jy/beam ! Clean residual mean=-0.000111 rms=0.002222 Jy/beam ! Combined flux in latest and established models = 0.158481 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 59 components and 0.158481 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106440Jy sigma=1.126617 ! Fit after self-cal, rms=0.106386Jy sigma=1.126261 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106386Jy sigma=1.126261 ! Fit after self-cal, rms=0.097383Jy sigma=1.036684 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00328571 Jy ! Component: 100 - total flux cleaned = 0.00312349 Jy ! Component: 150 - total flux cleaned = 0.00286568 Jy ! Component: 200 - total flux cleaned = 0.00258333 Jy ! Total flux subtracted in 200 components = 0.00258333 Jy ! Clean residual min=-0.007006 max=0.007345 Jy/beam ! Clean residual mean=-0.000122 rms=0.002034 Jy/beam ! Combined flux in latest and established models = 0.161065 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 63 components and 0.161065 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097344Jy sigma=1.033626 ! Fit after self-cal, rms=0.096540Jy sigma=1.027061 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.912 x 10.81 at 6.527 degrees (North through East) ! Clean map min=-0.0067363 max=0.11013 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096540Jy sigma=1.027061 ! Fit after self-cal, rms=0.096540Jy sigma=1.027061 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096540Jy sigma=1.027061 ! Fit after self-cal, rms=0.096518Jy sigma=1.026249 ! Inverting map and beam ! Estimated beam: bmin=3.912 mas, bmaj=10.81 mas, bpa=6.527 degrees ! Estimated noise=1.3747 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -3.35177e-05 Jy ! Component: 100 - total flux cleaned = -0.000252326 Jy ! Component: 150 - total flux cleaned = -0.000396374 Jy ! Component: 200 - total flux cleaned = -0.000573487 Jy ! Total flux subtracted in 200 components = -0.000573487 Jy ! Clean residual min=-0.006828 max=0.007219 Jy/beam ! Clean residual mean=-0.000124 rms=0.001988 Jy/beam ! Combined flux in latest and established models = 0.160491 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 68 components and 0.160491 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096530Jy sigma=1.025592 ! Fit after self-cal, rms=0.096563Jy sigma=1.025418 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096563Jy sigma=1.025418 ! Fit after self-cal, rms=0.096563Jy sigma=1.025418 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096563Jy sigma=1.025418 ! Fit after self-cal, rms=0.096591Jy sigma=1.025389 ! Inverting map and beam ! Estimated beam: bmin=3.912 mas, bmaj=10.81 mas, bpa=6.527 degrees ! Estimated noise=1.3747 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000253066 Jy ! Component: 100 - total flux cleaned = -0.00033613 Jy ! Component: 150 - total flux cleaned = -0.000447376 Jy ! Component: 200 - total flux cleaned = -0.000549774 Jy ! Total flux subtracted in 200 components = -0.000549774 Jy ! Clean residual min=-0.006780 max=0.007139 Jy/beam ! Clean residual mean=-0.000124 rms=0.001975 Jy/beam ! Combined flux in latest and established models = 0.159942 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 74 components and 0.159942 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096602Jy sigma=1.025032 ! Fit after self-cal, rms=0.096615Jy sigma=1.025004 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.538 mas, bmaj=24.62 mas, bpa=1.251 degrees ! Estimated noise=1.62439 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000173358 Jy ! Component: 100 - total flux cleaned = -0.000111395 Jy ! Component: 150 - total flux cleaned = -8.25526e-05 Jy ! Component: 200 - total flux cleaned = -7.67784e-05 Jy ! Total flux subtracted in 200 components = -7.67784e-05 Jy ! Clean residual min=-0.008455 max=0.006636 Jy/beam ! Clean residual mean=-0.000201 rms=0.002379 Jy/beam ! Combined flux in latest and established models = 0.159865 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 80 components and 0.159865 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096616Jy sigma=1.025020 ! Fit after self-cal, rms=0.096623Jy sigma=1.024970 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.937 mas, bmaj=8.09 mas, bpa=7.067 degrees ! Estimated noise=2.29392 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0957426 Jy ! Component: 100 - total flux cleaned = 0.124301 Jy ! Component: 150 - total flux cleaned = 0.139795 Jy ! Component: 200 - total flux cleaned = 0.148759 Jy ! Total flux subtracted in 200 components = 0.148759 Jy ! Clean residual min=-0.008206 max=0.008717 Jy/beam ! Clean residual mean=-0.000088 rms=0.002227 Jy/beam ! Combined flux in latest and established models = 0.148759 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 39 model components to the UV plane model. ! The established model now contains 39 components and 0.148759 Jy ! Inverting map and beam ! Estimated beam: bmin=3.912 mas, bmaj=10.81 mas, bpa=6.527 degrees ! Estimated noise=1.3747 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00803189 Jy ! Component: 100 - total flux cleaned = 0.00981146 Jy ! Component: 150 - total flux cleaned = 0.0101886 Jy ! Component: 200 - total flux cleaned = 0.010434 Jy ! Total flux subtracted in 200 components = 0.010434 Jy ! Clean residual min=-0.007254 max=0.007222 Jy/beam ! Clean residual mean=-0.000127 rms=0.002046 Jy/beam ! Combined flux in latest and established models = 0.159193 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 48 components and 0.159193 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.538 mas, bmaj=24.62 mas, bpa=1.251 degrees ! Estimated noise=1.62439 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000343956 Jy ! Component: 100 - total flux cleaned = 0.000401388 Jy ! Component: 150 - total flux cleaned = 0.000408044 Jy ! Component: 200 - total flux cleaned = 0.000409776 Jy ! Total flux subtracted in 200 components = 0.000409776 Jy ! Clean residual min=-0.008615 max=0.006715 Jy/beam ! Clean residual mean=-0.000204 rms=0.002434 Jy/beam ! Combined flux in latest and established models = 0.159602 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 60 components and 0.159602 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.912 mas, bmaj=10.81 mas, bpa=6.527 degrees ! Estimated noise=1.3747 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000112831 Jy ! Component: 100 - total flux cleaned = -0.000263776 Jy ! Component: 150 - total flux cleaned = -0.000355527 Jy ! Component: 200 - total flux cleaned = -0.000398999 Jy ! Total flux subtracted in 200 components = -0.000398999 Jy ! Clean residual min=-0.007121 max=0.007234 Jy/beam ! Clean residual mean=-0.000126 rms=0.002019 Jy/beam ! Combined flux in latest and established models = 0.159203 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 67 components and 0.159203 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096638Jy sigma=1.026168 ! Fit after self-cal, rms=0.096654Jy sigma=1.026061 wmodel J0152-2942_S_2005_07_08_yyk\_map.mod ! Writing 67 model components to file: J0152-2942_S_2005_07_08_yyk_map.mod wobs J0152-2942_S_2005_07_08_yyk\_uvs.fits ! Writing UV FITS file: J0152-2942_S_2005_07_08_yyk_uvs.fits wwins J0152-2942_S_2005_07_08_yyk\_map.win ! wwins: Wrote 1 windows to J0152-2942_S_2005_07_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000116539 Jy ! Component: 100 - total flux cleaned = -0.000343539 Jy ! Component: 150 - total flux cleaned = -0.000337428 Jy ! Component: 200 - total flux cleaned = -0.000246343 Jy ! Component: 250 - total flux cleaned = -0.000331001 Jy ! Component: 300 - total flux cleaned = -0.000244981 Jy ! Component: 350 - total flux cleaned = -4.19162e-06 Jy ! Component: 400 - total flux cleaned = 0.000302621 Jy ! Component: 450 - total flux cleaned = 0.000374792 Jy ! Component: 500 - total flux cleaned = 0.000446802 Jy ! Component: 550 - total flux cleaned = 0.00044953 Jy ! Component: 600 - total flux cleaned = 0.000851698 Jy ! Component: 650 - total flux cleaned = 0.00104519 Jy ! Component: 700 - total flux cleaned = 0.00117016 Jy ! Component: 750 - total flux cleaned = 0.00141576 Jy ! Component: 800 - total flux cleaned = 0.00153368 Jy ! Component: 850 - total flux cleaned = 0.0015915 Jy ! Component: 900 - total flux cleaned = 0.00159134 Jy ! Component: 950 - total flux cleaned = 0.00159159 Jy ! Component: 1000 - total flux cleaned = 0.00175559 Jy ! Component: 1050 - total flux cleaned = 0.00170214 Jy ! Component: 1100 - total flux cleaned = 0.00159739 Jy ! Component: 1150 - total flux cleaned = 0.00154585 Jy ! Component: 1200 - total flux cleaned = 0.00169629 Jy ! Component: 1250 - total flux cleaned = 0.00159606 Jy ! Component: 1300 - total flux cleaned = 0.00164378 Jy ! Component: 1350 - total flux cleaned = 0.0015949 Jy ! Component: 1400 - total flux cleaned = 0.00173646 Jy ! Component: 1450 - total flux cleaned = 0.00173639 Jy ! Component: 1500 - total flux cleaned = 0.00187463 Jy ! Component: 1550 - total flux cleaned = 0.00201037 Jy ! Component: 1600 - total flux cleaned = 0.00214363 Jy ! Component: 1650 - total flux cleaned = 0.00231797 Jy ! Component: 1700 - total flux cleaned = 0.00244688 Jy ! Component: 1750 - total flux cleaned = 0.00253181 Jy ! Component: 1800 - total flux cleaned = 0.00253245 Jy ! Component: 1850 - total flux cleaned = 0.00282359 Jy ! Component: 1900 - total flux cleaned = 0.00302858 Jy ! Component: 1950 - total flux cleaned = 0.00323041 Jy ! Component: 2000 - total flux cleaned = 0.00343017 Jy ! Total flux subtracted in 2048 components = 0.00358779 Jy ! Clean residual min=-0.002109 max=0.002494 Jy/beam ! Clean residual mean=-0.000022 rms=0.000866 Jy/beam ! Combined flux in latest and established models = 0.162791 Jy keep ! Adding 133 model components to the UV plane model. ! The established model now contains 200 components and 0.162791 Jy ![Exited script file: muppet] wmap "J0152-2942_S_2005_07_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.912 x 10.81 at 6.527 degrees (North through East) ! Clean map min=-0.0047376 max=0.11119 Jy/beam ! Writing clean map to FITS file: J0152-2942_S_2005_07_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.111189 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000844125 device "J0152-2942_S_2005_07_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J0152-2942_S_2005_07_08_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.27754 2.27754 4.55508 9.11016 18.2203 36.4406 72.8813 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0025 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.111 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.912 x 10.81 at 6.527 degrees (North through East) ! Clean map min=-0.0047376 max=0.11119 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0152-2942_S_2005_07_08_yyk\_map.gif/gif" ! Attempting to open device: 'J0152-2942_S_2005_07_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0152-2942_S_2005_07_08_yyk_uvs.log closed on Fri Jan 20 09:46:06 2006