! Started logfile: J0141-0202_S_2005_07_20_yyk_uvs.log on Fri Jan 20 09:45:28 2006 obs J0141-0202_S_2005_07_20_yyk_uve.fits ! Reading UV FITS file: J0141-0202_S_2005_07_20_yyk_uve.fits ! AN table 1: 11 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.89697 visibilities/baseline/integration-bin. ! Found source: J0141-0202 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1527 lines of history. ! ! Reading 1776 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0141-0202_S_2005_07_20_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.141212 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.625 mas, bmaj=7.336 mas, bpa=-6.625 degrees ! Estimated noise=1.33504 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.106117 Jy ! Component: 100 - total flux cleaned = 0.122646 Jy ! Total flux subtracted in 100 components = 0.122646 Jy ! Clean residual min=-0.005578 max=0.007118 Jy/beam ! Clean residual mean=-0.000011 rms=0.001697 Jy/beam ! Combined flux in latest and established models = 0.122646 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.122646 Jy ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.062536Jy sigma=1.052860 ! Fit after self-cal, rms=0.062011Jy sigma=1.045299 ! Inverting map and beam ! Estimated beam: bmin=2.625 mas, bmaj=7.336 mas, bpa=-6.625 degrees ! Estimated noise=1.33504 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.294 mas, bmaj=8.936 mas, bpa=-9.371 degrees ! Estimated noise=0.91834 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00598312 Jy ! Component: 100 - total flux cleaned = 0.00857619 Jy ! Component: 150 - total flux cleaned = 0.00982185 Jy ! Component: 200 - total flux cleaned = 0.00995007 Jy ! Total flux subtracted in 200 components = 0.00995007 Jy ! Clean residual min=-0.003543 max=0.003322 Jy/beam ! Clean residual mean=-0.000019 rms=0.000991 Jy/beam ! Combined flux in latest and established models = 0.132596 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 36 components and 0.132596 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061300Jy sigma=1.037054 ! Fit after self-cal, rms=0.061293Jy sigma=1.037024 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.294 x 8.936 at -9.371 degrees (North through East) ! Clean map min=-0.003484 max=0.12221 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.999452 ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.05 HN 1.01 KP 0.96 ! LA 1.08 MK 0.91 NL 1.06 OV 0.98 ! PT 1.08 SC 0.93 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.970628 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.01 HN 1.09 KP 1.01 ! LA 1.03 MK 0.99 NL 1.05 OV 0.96 ! PT 1.07 SC 1.06 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.972654 ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.98 HN 0.93 KP 0.97 ! LA 0.87 MK 1.08 NL 1.12 OV 1.09 ! PT 1.11 SC 1.05 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.061293Jy sigma=1.037024 ! Fit after self-cal, rms=0.060864Jy sigma=1.023050 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060864Jy sigma=1.023050 ! Fit after self-cal, rms=0.060860Jy sigma=1.023026 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.265 mas, bmaj=8.897 mas, bpa=-9.414 degrees ! Estimated noise=0.916589 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00117424 Jy ! Component: 100 - total flux cleaned = 0.00146843 Jy ! Component: 150 - total flux cleaned = 0.00168059 Jy ! Component: 200 - total flux cleaned = 0.00176116 Jy ! Total flux subtracted in 200 components = 0.00176116 Jy ! Clean residual min=-0.002818 max=0.003053 Jy/beam ! Clean residual mean=0.000014 rms=0.000832 Jy/beam ! Combined flux in latest and established models = 0.134357 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 41 components and 0.134357 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060799Jy sigma=1.022303 ! Fit after self-cal, rms=0.060794Jy sigma=1.022294 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060794Jy sigma=1.022294 ! Fit after self-cal, rms=0.058949Jy sigma=0.988888 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000467747 Jy ! Component: 100 - total flux cleaned = 0.000582295 Jy ! Component: 150 - total flux cleaned = 0.000653632 Jy ! Component: 200 - total flux cleaned = 0.000734709 Jy ! Total flux subtracted in 200 components = 0.000734709 Jy ! Clean residual min=-0.002785 max=0.003211 Jy/beam ! Clean residual mean=0.000013 rms=0.000834 Jy/beam ! Combined flux in latest and established models = 0.135091 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 44 components and 0.135091 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058897Jy sigma=0.988514 ! Fit after self-cal, rms=0.058835Jy sigma=0.986958 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.265 x 8.897 at -9.414 degrees (North through East) ! Clean map min=-0.0027169 max=0.12238 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058835Jy sigma=0.986958 ! Fit after self-cal, rms=0.059561Jy sigma=0.971876 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059561Jy sigma=0.971876 ! Fit after self-cal, rms=0.059564Jy sigma=0.971703 ! Inverting map and beam ! Estimated beam: bmin=3.233 mas, bmaj=8.785 mas, bpa=-9.362 degrees ! Estimated noise=0.943308 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00395424 Jy ! Component: 100 - total flux cleaned = 0.00529184 Jy ! Component: 150 - total flux cleaned = 0.00575287 Jy ! Component: 200 - total flux cleaned = 0.00584362 Jy ! Total flux subtracted in 200 components = 0.00584362 Jy ! Clean residual min=-0.002854 max=0.002953 Jy/beam ! Clean residual mean=0.000015 rms=0.000814 Jy/beam ! Combined flux in latest and established models = 0.140935 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 57 components and 0.140935 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059226Jy sigma=0.968031 ! Fit after self-cal, rms=0.059223Jy sigma=0.968012 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059223Jy sigma=0.968012 ! Fit after self-cal, rms=0.060647Jy sigma=0.959780 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060647Jy sigma=0.959780 ! Fit after self-cal, rms=0.060656Jy sigma=0.959717 ! Inverting map and beam ! Estimated beam: bmin=3.198 mas, bmaj=8.738 mas, bpa=-9.295 degrees ! Estimated noise=0.969244 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00371883 Jy ! Component: 100 - total flux cleaned = 0.00495587 Jy ! Component: 150 - total flux cleaned = 0.00539056 Jy ! Component: 200 - total flux cleaned = 0.00546203 Jy ! Total flux subtracted in 200 components = 0.00546203 Jy ! Clean residual min=-0.003064 max=0.003069 Jy/beam ! Clean residual mean=0.000020 rms=0.000865 Jy/beam ! Combined flux in latest and established models = 0.146397 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 63 components and 0.146397 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060373Jy sigma=0.956596 ! Fit after self-cal, rms=0.060372Jy sigma=0.956590 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.892 mas, bmaj=13.14 mas, bpa=2.474 degrees ! Estimated noise=1.22669 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -7.46151e-05 Jy ! Component: 100 - total flux cleaned = -0.000144132 Jy ! Component: 150 - total flux cleaned = -0.000235781 Jy ! Component: 200 - total flux cleaned = -0.000292648 Jy ! Total flux subtracted in 200 components = -0.000292648 Jy ! Clean residual min=-0.003614 max=0.003834 Jy/beam ! Clean residual mean=0.000042 rms=0.001154 Jy/beam ! Combined flux in latest and established models = 0.146104 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 72 components and 0.146104 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060367Jy sigma=0.956753 ! Fit after self-cal, rms=0.060364Jy sigma=0.956605 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.593 mas, bmaj=7.256 mas, bpa=-6.462 degrees ! Estimated noise=1.38671 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.111682 Jy ! Component: 100 - total flux cleaned = 0.130306 Jy ! Component: 150 - total flux cleaned = 0.13819 Jy ! Component: 200 - total flux cleaned = 0.142893 Jy ! Total flux subtracted in 200 components = 0.142893 Jy ! Clean residual min=-0.004445 max=0.004705 Jy/beam ! Clean residual mean=0.000003 rms=0.001335 Jy/beam ! Combined flux in latest and established models = 0.142893 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 38 model components to the UV plane model. ! The established model now contains 38 components and 0.142893 Jy ! Inverting map and beam ! Estimated beam: bmin=3.198 mas, bmaj=8.738 mas, bpa=-9.295 degrees ! Estimated noise=0.969244 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00320474 Jy ! Component: 100 - total flux cleaned = 0.00344361 Jy ! Component: 150 - total flux cleaned = 0.0036216 Jy ! Component: 200 - total flux cleaned = 0.00362251 Jy ! Total flux subtracted in 200 components = 0.00362251 Jy ! Clean residual min=-0.003066 max=0.002938 Jy/beam ! Clean residual mean=0.000020 rms=0.000876 Jy/beam ! Combined flux in latest and established models = 0.146516 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 56 components and 0.146516 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.892 mas, bmaj=13.14 mas, bpa=2.474 degrees ! Estimated noise=1.22669 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -6.26713e-05 Jy ! Component: 100 - total flux cleaned = -0.000147378 Jy ! Component: 150 - total flux cleaned = -0.00026051 Jy ! Component: 200 - total flux cleaned = -0.000334588 Jy ! Total flux subtracted in 200 components = -0.000334588 Jy ! Clean residual min=-0.003621 max=0.003715 Jy/beam ! Clean residual mean=0.000042 rms=0.001152 Jy/beam ! Combined flux in latest and established models = 0.146181 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 67 components and 0.146181 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.198 mas, bmaj=8.738 mas, bpa=-9.295 degrees ! Estimated noise=0.969244 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000106292 Jy ! Component: 100 - total flux cleaned = 0.0002457 Jy ! Component: 150 - total flux cleaned = 0.000277414 Jy ! Component: 200 - total flux cleaned = 0.000303347 Jy ! Total flux subtracted in 200 components = 0.000303347 Jy ! Clean residual min=-0.003056 max=0.002899 Jy/beam ! Clean residual mean=0.000020 rms=0.000870 Jy/beam ! Combined flux in latest and established models = 0.146484 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 75 components and 0.146484 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060389Jy sigma=0.956872 ! Fit after self-cal, rms=0.060389Jy sigma=0.956852 wmodel J0141-0202_S_2005_07_20_yyk\_map.mod ! Writing 75 model components to file: J0141-0202_S_2005_07_20_yyk_map.mod wobs J0141-0202_S_2005_07_20_yyk\_uvs.fits ! Writing UV FITS file: J0141-0202_S_2005_07_20_yyk_uvs.fits wwins J0141-0202_S_2005_07_20_yyk\_map.win ! wwins: Wrote 1 windows to J0141-0202_S_2005_07_20_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000174243 Jy ! Component: 100 - total flux cleaned = -0.000375719 Jy ! Component: 150 - total flux cleaned = -0.000567057 Jy ! Component: 200 - total flux cleaned = -0.000613556 Jy ! Component: 250 - total flux cleaned = -0.000744946 Jy ! Component: 300 - total flux cleaned = -0.000829022 Jy ! Component: 350 - total flux cleaned = -0.000829042 Jy ! Component: 400 - total flux cleaned = -0.000906209 Jy ! Component: 450 - total flux cleaned = -0.000830739 Jy ! Component: 500 - total flux cleaned = -0.000793986 Jy ! Component: 550 - total flux cleaned = -0.000900516 Jy ! Component: 600 - total flux cleaned = -0.000970011 Jy ! Component: 650 - total flux cleaned = -0.00110511 Jy ! Component: 700 - total flux cleaned = -0.0011049 Jy ! Component: 750 - total flux cleaned = -0.0011699 Jy ! Component: 800 - total flux cleaned = -0.00116979 Jy ! Component: 850 - total flux cleaned = -0.00120124 Jy ! Component: 900 - total flux cleaned = -0.00116943 Jy ! Component: 950 - total flux cleaned = -0.00123094 Jy ! Component: 1000 - total flux cleaned = -0.00120104 Jy ! Component: 1050 - total flux cleaned = -0.00129145 Jy ! Component: 1100 - total flux cleaned = -0.00140891 Jy ! Component: 1150 - total flux cleaned = -0.00146608 Jy ! Component: 1200 - total flux cleaned = -0.00140859 Jy ! Component: 1250 - total flux cleaned = -0.00149303 Jy ! Component: 1300 - total flux cleaned = -0.00149301 Jy ! Component: 1350 - total flux cleaned = -0.00149281 Jy ! Component: 1400 - total flux cleaned = -0.00154729 Jy ! Component: 1450 - total flux cleaned = -0.00149382 Jy ! Component: 1500 - total flux cleaned = -0.00154695 Jy ! Component: 1550 - total flux cleaned = -0.00159917 Jy ! Component: 1600 - total flux cleaned = -0.0016246 Jy ! Component: 1650 - total flux cleaned = -0.00159892 Jy ! Component: 1700 - total flux cleaned = -0.00167525 Jy ! Component: 1750 - total flux cleaned = -0.00165048 Jy ! Component: 1800 - total flux cleaned = -0.00174992 Jy ! Component: 1850 - total flux cleaned = -0.0017005 Jy ! Component: 1900 - total flux cleaned = -0.00174963 Jy ! Component: 1950 - total flux cleaned = -0.00177391 Jy ! Component: 2000 - total flux cleaned = -0.00184593 Jy ! Total flux subtracted in 2048 components = -0.00182182 Jy ! Clean residual min=-0.001400 max=0.001419 Jy/beam ! Clean residual mean=-0.000000 rms=0.000499 Jy/beam ! Combined flux in latest and established models = 0.144662 Jy keep ! Adding 139 model components to the UV plane model. ! The established model now contains 214 components and 0.144662 Jy ![Exited script file: muppet] wmap "J0141-0202_S_2005_07_20_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.198 x 8.738 at -9.295 degrees (North through East) ! Clean map min=-0.0027963 max=0.13004 Jy/beam ! Writing clean map to FITS file: J0141-0202_S_2005_07_20_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.130041 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000500223 device "J0141-0202_S_2005_07_20_yyk\_map.eps/VPS" ! Attempting to open device: 'J0141-0202_S_2005_07_20_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.154 1.154 2.308 4.616 9.232 18.464 36.928 73.856 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.13 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.198 x 8.738 at -9.295 degrees (North through East) ! Clean map min=-0.0027963 max=0.13004 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0141-0202_S_2005_07_20_yyk\_map.gif/gif" ! Attempting to open device: 'J0141-0202_S_2005_07_20_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0141-0202_S_2005_07_20_yyk_uvs.log closed on Fri Jan 20 09:45:32 2006