! Started logfile: J0123-0923_S_2005_07_08_yyk_uvs.log on Fri Jan 20 09:44:01 2006 obs J0123-0923_S_2005_07_08_yyk_uve.fits ! Reading UV FITS file: J0123-0923_S_2005_07_08_yyk_uve.fits ! AN table 1: 5 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.826667 visibilities/baseline/integration-bin. ! Found source: J0123-0923 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1412 lines of history. ! ! Reading 744 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0123-0923_S_2005_07_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.136283 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.627 mas, bmaj=6.692 mas, bpa=-1.805 degrees ! Estimated noise=1.67403 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.105763 Jy ! Component: 100 - total flux cleaned = 0.12199 Jy ! Total flux subtracted in 100 components = 0.12199 Jy ! Clean residual min=-0.006327 max=0.006825 Jy/beam ! Clean residual mean=-0.000039 rms=0.001771 Jy/beam ! Combined flux in latest and established models = 0.12199 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.12199 Jy ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.053609Jy sigma=1.014590 ! Fit after self-cal, rms=0.053448Jy sigma=1.009206 ! Inverting map and beam ! Estimated beam: bmin=2.627 mas, bmaj=6.692 mas, bpa=-1.805 degrees ! Estimated noise=1.67403 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.043 mas, bmaj=7.689 mas, bpa=-2.085 degrees ! Estimated noise=1.31147 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00461854 Jy ! Component: 100 - total flux cleaned = 0.00672354 Jy ! Component: 150 - total flux cleaned = 0.00698951 Jy ! Component: 200 - total flux cleaned = 0.00708422 Jy ! Total flux subtracted in 200 components = 0.00708422 Jy ! Clean residual min=-0.005674 max=0.005022 Jy/beam ! Clean residual mean=-0.000100 rms=0.001498 Jy/beam ! Combined flux in latest and established models = 0.129075 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 26 components and 0.129075 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052996Jy sigma=1.003050 ! Fit after self-cal, rms=0.052999Jy sigma=1.003004 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.043 x 7.689 at -2.085 degrees (North through East) ! Clean map min=-0.0055097 max=0.11977 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.02112 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.07 HN 0.98 KP 0.91 ! LA 1.07 MK 0.90 NL 0.87 OV 1.01 ! PT 1.06 SC 0.93 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.999289 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.06 HN 0.96 KP 1.01 ! LA 1.03 MK 1.04 NL 0.96 OV 1.01 ! PT 1.05 SC 0.89 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.052999Jy sigma=1.003004 ! Fit after self-cal, rms=0.050995Jy sigma=0.987431 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050995Jy sigma=0.987431 ! Fit after self-cal, rms=0.050994Jy sigma=0.987274 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.984 mas, bmaj=7.524 mas, bpa=-1.626 degrees ! Estimated noise=1.31753 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00293856 Jy ! Component: 100 - total flux cleaned = 0.00391227 Jy ! Component: 150 - total flux cleaned = 0.00416707 Jy ! Component: 200 - total flux cleaned = 0.00432058 Jy ! Total flux subtracted in 200 components = 0.00432058 Jy ! Clean residual min=-0.005095 max=0.005041 Jy/beam ! Clean residual mean=-0.000045 rms=0.001418 Jy/beam ! Combined flux in latest and established models = 0.133395 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 37 components and 0.133395 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050810Jy sigma=0.984491 ! Fit after self-cal, rms=0.050807Jy sigma=0.984437 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050807Jy sigma=0.984437 ! Fit after self-cal, rms=0.049735Jy sigma=0.963884 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00072432 Jy ! Component: 100 - total flux cleaned = 0.000829344 Jy ! Component: 150 - total flux cleaned = 0.00093291 Jy ! Component: 200 - total flux cleaned = 0.00099777 Jy ! Total flux subtracted in 200 components = 0.00099777 Jy ! Clean residual min=-0.005037 max=0.005047 Jy/beam ! Clean residual mean=-0.000045 rms=0.001403 Jy/beam ! Combined flux in latest and established models = 0.134393 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 40 components and 0.134393 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049686Jy sigma=0.963142 ! Fit after self-cal, rms=0.049509Jy sigma=0.961670 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.984 x 7.524 at -1.626 degrees (North through East) ! Clean map min=-0.0047888 max=0.11991 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049509Jy sigma=0.961670 ! Fit after self-cal, rms=0.046725Jy sigma=0.943130 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.046725Jy sigma=0.943130 ! Fit after self-cal, rms=0.046644Jy sigma=0.942773 ! Inverting map and beam ! Estimated beam: bmin=3.006 mas, bmaj=7.538 mas, bpa=-1.398 degrees ! Estimated noise=1.2809 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00305608 Jy ! Component: 100 - total flux cleaned = -0.00314476 Jy ! Component: 150 - total flux cleaned = -0.00314642 Jy ! Component: 200 - total flux cleaned = -0.00311793 Jy ! Total flux subtracted in 200 components = -0.00311793 Jy ! Clean residual min=-0.004743 max=0.004985 Jy/beam ! Clean residual mean=-0.000035 rms=0.001330 Jy/beam ! Combined flux in latest and established models = 0.131275 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 43 components and 0.131275 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.046591Jy sigma=0.939436 ! Fit after self-cal, rms=0.046548Jy sigma=0.939280 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.046548Jy sigma=0.939280 ! Fit after self-cal, rms=0.045593Jy sigma=0.929119 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.045593Jy sigma=0.929119 ! Fit after self-cal, rms=0.045575Jy sigma=0.928995 ! Inverting map and beam ! Estimated beam: bmin=3.019 mas, bmaj=7.572 mas, bpa=-1.556 degrees ! Estimated noise=1.26145 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00186385 Jy ! Component: 100 - total flux cleaned = -0.00199429 Jy ! Component: 150 - total flux cleaned = -0.00196773 Jy ! Component: 200 - total flux cleaned = -0.00193997 Jy ! Total flux subtracted in 200 components = -0.00193997 Jy ! Clean residual min=-0.004692 max=0.004854 Jy/beam ! Clean residual mean=-0.000023 rms=0.001308 Jy/beam ! Combined flux in latest and established models = 0.129335 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 44 components and 0.129335 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.045555Jy sigma=0.927562 ! Fit after self-cal, rms=0.045545Jy sigma=0.927499 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.676 mas, bmaj=14.41 mas, bpa=9.092 degrees ! Estimated noise=1.63419 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000998948 Jy ! Component: 100 - total flux cleaned = 0.00131433 Jy ! Component: 150 - total flux cleaned = 0.00145502 Jy ! Component: 200 - total flux cleaned = 0.00157097 Jy ! Total flux subtracted in 200 components = 0.00157097 Jy ! Clean residual min=-0.005256 max=0.004700 Jy/beam ! Clean residual mean=-0.000065 rms=0.001612 Jy/beam ! Combined flux in latest and established models = 0.130906 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 48 components and 0.130906 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.045623Jy sigma=0.929379 ! Fit after self-cal, rms=0.045609Jy sigma=0.929061 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.615 mas, bmaj=6.632 mas, bpa=-1.804 degrees ! Estimated noise=1.61995 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.10152 Jy ! Component: 100 - total flux cleaned = 0.116779 Jy ! Component: 150 - total flux cleaned = 0.122245 Jy ! Component: 200 - total flux cleaned = 0.125284 Jy ! Total flux subtracted in 200 components = 0.125284 Jy ! Clean residual min=-0.004438 max=0.005926 Jy/beam ! Clean residual mean=0.000000 rms=0.001416 Jy/beam ! Combined flux in latest and established models = 0.125284 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.125284 Jy ! Inverting map and beam ! Estimated beam: bmin=3.019 mas, bmaj=7.572 mas, bpa=-1.556 degrees ! Estimated noise=1.26145 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00255463 Jy ! Component: 100 - total flux cleaned = 0.00303228 Jy ! Component: 150 - total flux cleaned = 0.00323345 Jy ! Component: 200 - total flux cleaned = 0.00336871 Jy ! Total flux subtracted in 200 components = 0.00336871 Jy ! Clean residual min=-0.004690 max=0.004911 Jy/beam ! Clean residual mean=-0.000022 rms=0.001335 Jy/beam ! Combined flux in latest and established models = 0.128653 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 37 components and 0.128653 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.676 mas, bmaj=14.41 mas, bpa=9.092 degrees ! Estimated noise=1.63419 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00164858 Jy ! Component: 100 - total flux cleaned = 0.00192539 Jy ! Component: 150 - total flux cleaned = 0.00203441 Jy ! Component: 200 - total flux cleaned = 0.00217065 Jy ! Total flux subtracted in 200 components = 0.00217065 Jy ! Clean residual min=-0.005211 max=0.004673 Jy/beam ! Clean residual mean=-0.000065 rms=0.001613 Jy/beam ! Combined flux in latest and established models = 0.130824 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 42 components and 0.130824 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.019 mas, bmaj=7.572 mas, bpa=-1.556 degrees ! Estimated noise=1.26145 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00102933 Jy ! Component: 100 - total flux cleaned = -0.00119139 Jy ! Component: 150 - total flux cleaned = -0.00118879 Jy ! Component: 200 - total flux cleaned = -0.00114055 Jy ! Total flux subtracted in 200 components = -0.00114055 Jy ! Clean residual min=-0.004677 max=0.004823 Jy/beam ! Clean residual mean=-0.000025 rms=0.001303 Jy/beam ! Combined flux in latest and established models = 0.129683 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 52 components and 0.129683 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.045525Jy sigma=0.927722 ! Fit after self-cal, rms=0.045524Jy sigma=0.927632 wmodel J0123-0923_S_2005_07_08_yyk\_map.mod ! Writing 52 model components to file: J0123-0923_S_2005_07_08_yyk_map.mod wobs J0123-0923_S_2005_07_08_yyk\_uvs.fits ! Writing UV FITS file: J0123-0923_S_2005_07_08_yyk_uvs.fits wwins J0123-0923_S_2005_07_08_yyk\_map.win ! wwins: Wrote 1 windows to J0123-0923_S_2005_07_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000627752 Jy ! Component: 100 - total flux cleaned = 0.00148479 Jy ! Component: 150 - total flux cleaned = 0.0022816 Jy ! Component: 200 - total flux cleaned = 0.00289353 Jy ! Component: 250 - total flux cleaned = 0.00360159 Jy ! Component: 300 - total flux cleaned = 0.00415498 Jy ! Component: 350 - total flux cleaned = 0.00462583 Jy ! Component: 400 - total flux cleaned = 0.00507828 Jy ! Component: 450 - total flux cleaned = 0.00556898 Jy ! Component: 500 - total flux cleaned = 0.00588436 Jy ! Component: 550 - total flux cleaned = 0.00618898 Jy ! Component: 600 - total flux cleaned = 0.0063367 Jy ! Component: 650 - total flux cleaned = 0.00667172 Jy ! Component: 700 - total flux cleaned = 0.00690326 Jy ! Component: 750 - total flux cleaned = 0.00712776 Jy ! Component: 800 - total flux cleaned = 0.0073025 Jy ! Component: 850 - total flux cleaned = 0.00743053 Jy ! Component: 900 - total flux cleaned = 0.00755493 Jy ! Component: 950 - total flux cleaned = 0.00755462 Jy ! Component: 1000 - total flux cleaned = 0.00767299 Jy ! Component: 1050 - total flux cleaned = 0.00771105 Jy ! Component: 1100 - total flux cleaned = 0.00767344 Jy ! Component: 1150 - total flux cleaned = 0.00763731 Jy ! Component: 1200 - total flux cleaned = 0.0077096 Jy ! Component: 1250 - total flux cleaned = 0.00777944 Jy ! Component: 1300 - total flux cleaned = 0.00774551 Jy ! Component: 1350 - total flux cleaned = 0.00791402 Jy ! Component: 1400 - total flux cleaned = 0.00788036 Jy ! Component: 1450 - total flux cleaned = 0.00800974 Jy ! Component: 1500 - total flux cleaned = 0.0080728 Jy ! Component: 1550 - total flux cleaned = 0.00813433 Jy ! Component: 1600 - total flux cleaned = 0.00810302 Jy ! Component: 1650 - total flux cleaned = 0.0081026 Jy ! Component: 1700 - total flux cleaned = 0.00804392 Jy ! Component: 1750 - total flux cleaned = 0.00804334 Jy ! Component: 1800 - total flux cleaned = 0.0079861 Jy ! Component: 1850 - total flux cleaned = 0.00790125 Jy ! Component: 1900 - total flux cleaned = 0.00784596 Jy ! Component: 1950 - total flux cleaned = 0.00776368 Jy ! Component: 2000 - total flux cleaned = 0.00765551 Jy ! Total flux subtracted in 2048 components = 0.00752246 Jy ! Clean residual min=-0.001600 max=0.001786 Jy/beam ! Clean residual mean=-0.000015 rms=0.000530 Jy/beam ! Combined flux in latest and established models = 0.137205 Jy keep ! Adding 128 model components to the UV plane model. ! The established model now contains 180 components and 0.137205 Jy ![Exited script file: muppet] wmap "J0123-0923_S_2005_07_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.019 x 7.572 at -1.556 degrees (North through East) ! Clean map min=-0.003178 max=0.11527 Jy/beam ! Writing clean map to FITS file: J0123-0923_S_2005_07_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.11527 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000515393 device "J0123-0923_S_2005_07_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J0123-0923_S_2005_07_08_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.34136 1.34136 2.68272 5.36544 10.7309 21.4618 42.9235 85.847 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.115 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.019 x 7.572 at -1.556 degrees (North through East) ! Clean map min=-0.003178 max=0.11527 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0123-0923_S_2005_07_08_yyk\_map.gif/gif" ! Attempting to open device: 'J0123-0923_S_2005_07_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0123-0923_S_2005_07_08_yyk_uvs.log closed on Fri Jan 20 09:44:05 2006