! Started logfile: J0106-0315_X_2005_07_20_yyk_uvs.log on Fri Jan 20 09:43:39 2006 obs J0106-0315_X_2005_07_20_yyk_uve.fits ! Reading UV FITS file: J0106-0315_X_2005_07_20_yyk_uve.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.96 visibilities/baseline/integration-bin. ! Found source: J0106-0315 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1487 lines of history. ! ! Reading 1728 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0106-0315_X_2005_07_20_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.232092 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6822 mas, bmaj=1.818 mas, bpa=-1.791 degrees ! Estimated noise=1.39951 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.184294 Jy ! Component: 100 - total flux cleaned = 0.219344 Jy ! Total flux subtracted in 100 components = 0.219344 Jy ! Clean residual min=-0.008165 max=0.010040 Jy/beam ! Clean residual mean=0.000003 rms=0.002257 Jy/beam ! Combined flux in latest and established models = 0.219344 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.219344 Jy ! ! Correcting IF 1. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.076762Jy sigma=1.278053 ! Fit after self-cal, rms=0.076441Jy sigma=1.262696 ! Inverting map and beam ! Estimated beam: bmin=0.6822 mas, bmaj=1.818 mas, bpa=-1.791 degrees ! Estimated noise=1.39951 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8593 mas, bmaj=2.181 mas, bpa=-3.36 degrees ! Estimated noise=0.984183 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0128949 Jy ! Component: 100 - total flux cleaned = 0.0142795 Jy ! Component: 150 - total flux cleaned = 0.0142695 Jy ! Component: 200 - total flux cleaned = 0.0142702 Jy ! Total flux subtracted in 200 components = 0.0142702 Jy ! Clean residual min=-0.007666 max=0.009773 Jy/beam ! Clean residual mean=0.000023 rms=0.002361 Jy/beam ! Combined flux in latest and established models = 0.233614 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 17 components and 0.233614 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074944Jy sigma=1.231586 ! Fit after self-cal, rms=0.074921Jy sigma=1.231324 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8593 x 2.181 at -3.36 degrees (North through East) ! Clean map min=-0.0071411 max=0.21893 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.02075 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.97 HN 0.99 KP 0.94 ! LA 0.97 MK 0.92 NL 1.05 OV 0.91 ! PT 1.05 SC 1.02 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.01386 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 0.99 KP 0.89 ! LA 0.95 MK 1.03 NL 1.04 OV 0.92 ! PT 1.12 SC 0.96 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.990381 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.02 HN 0.91 KP 0.88 ! LA 0.95 MK 1.07 NL 1.09 OV 1.02 ! PT 1.21 SC 0.95 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.950138 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.02 HN 0.98 KP 0.98 ! LA 0.90 MK 1.05 NL 1.19 OV 0.99 ! PT 1.32 SC 1.07 ! ! ! Fit before self-cal, rms=0.074921Jy sigma=1.231324 ! Fit after self-cal, rms=0.071055Jy sigma=1.158892 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071055Jy sigma=1.158892 ! Fit after self-cal, rms=0.071053Jy sigma=1.158154 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8602 mas, bmaj=2.171 mas, bpa=-3.092 degrees ! Estimated noise=0.970335 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00132139 Jy ! Component: 100 - total flux cleaned = -0.00147788 Jy ! Component: 150 - total flux cleaned = -0.00152409 Jy ! Component: 200 - total flux cleaned = -0.00152556 Jy ! Total flux subtracted in 200 components = -0.00152556 Jy ! Clean residual min=-0.005440 max=0.005571 Jy/beam ! Clean residual mean=0.000019 rms=0.001716 Jy/beam ! Combined flux in latest and established models = 0.232088 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 26 components and 0.232088 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071018Jy sigma=1.157050 ! Fit after self-cal, rms=0.071007Jy sigma=1.156756 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071007Jy sigma=1.156756 ! Fit after self-cal, rms=0.068504Jy sigma=1.093100 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000340398 Jy ! Component: 100 - total flux cleaned = 0.000230404 Jy ! Component: 150 - total flux cleaned = 0.000185592 Jy ! Component: 200 - total flux cleaned = 0.000145997 Jy ! Total flux subtracted in 200 components = 0.000145997 Jy ! Clean residual min=-0.005407 max=0.005470 Jy/beam ! Clean residual mean=0.000019 rms=0.001600 Jy/beam ! Combined flux in latest and established models = 0.232234 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 31 components and 0.232234 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068541Jy sigma=1.092045 ! Fit after self-cal, rms=0.068734Jy sigma=1.087292 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8602 x 2.171 at -3.092 degrees (North through East) ! Clean map min=-0.0048302 max=0.21807 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068734Jy sigma=1.087292 ! Fit after self-cal, rms=0.067891Jy sigma=1.023032 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067891Jy sigma=1.023032 ! Fit after self-cal, rms=0.068057Jy sigma=1.022308 ! Inverting map and beam ! Estimated beam: bmin=0.8668 mas, bmaj=2.168 mas, bpa=-2.957 degrees ! Estimated noise=0.971639 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000352137 Jy ! Component: 100 - total flux cleaned = 0.000314987 Jy ! Component: 150 - total flux cleaned = 0.000313769 Jy ! Component: 200 - total flux cleaned = 0.00028068 Jy ! Total flux subtracted in 200 components = 0.00028068 Jy ! Clean residual min=-0.004430 max=0.004779 Jy/beam ! Clean residual mean=0.000012 rms=0.001252 Jy/beam ! Combined flux in latest and established models = 0.232515 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 37 components and 0.232515 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068054Jy sigma=1.021554 ! Fit after self-cal, rms=0.068139Jy sigma=1.021443 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068139Jy sigma=1.021443 ! Fit after self-cal, rms=0.067853Jy sigma=0.976087 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067853Jy sigma=0.976087 ! Fit after self-cal, rms=0.067890Jy sigma=0.976017 ! Inverting map and beam ! Estimated beam: bmin=0.8681 mas, bmaj=2.163 mas, bpa=-3.225 degrees ! Estimated noise=0.971628 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000806548 Jy ! Component: 100 - total flux cleaned = 0.000943176 Jy ! Component: 150 - total flux cleaned = 0.00100291 Jy ! Component: 200 - total flux cleaned = 0.00103024 Jy ! Total flux subtracted in 200 components = 0.00103024 Jy ! Clean residual min=-0.003893 max=0.004076 Jy/beam ! Clean residual mean=0.000011 rms=0.001035 Jy/beam ! Combined flux in latest and established models = 0.233545 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 42 components and 0.233545 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067851Jy sigma=0.975456 ! Fit after self-cal, rms=0.067863Jy sigma=0.975439 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.328 mas, bmaj=3.792 mas, bpa=7.848 degrees ! Estimated noise=1.27349 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -1.17951e-05 Jy ! Component: 100 - total flux cleaned = 8.37817e-05 Jy ! Component: 150 - total flux cleaned = 0.000164071 Jy ! Component: 200 - total flux cleaned = 0.000232272 Jy ! Total flux subtracted in 200 components = 0.000232272 Jy ! Clean residual min=-0.003637 max=0.003348 Jy/beam ! Clean residual mean=0.000024 rms=0.001043 Jy/beam ! Combined flux in latest and established models = 0.233778 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 5 model components to the UV plane model. ! The established model now contains 43 components and 0.233778 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067847Jy sigma=0.975461 ! Fit after self-cal, rms=0.067848Jy sigma=0.975352 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6877 mas, bmaj=1.81 mas, bpa=-1.276 degrees ! Estimated noise=1.39528 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.184641 Jy ! Component: 100 - total flux cleaned = 0.217543 Jy ! Component: 150 - total flux cleaned = 0.230353 Jy ! Component: 200 - total flux cleaned = 0.235847 Jy ! Total flux subtracted in 200 components = 0.235847 Jy ! Clean residual min=-0.004966 max=0.005287 Jy/beam ! Clean residual mean=0.000003 rms=0.001326 Jy/beam ! Combined flux in latest and established models = 0.235847 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.235847 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8681 mas, bmaj=2.163 mas, bpa=-3.225 degrees ! Estimated noise=0.971628 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -9.1688e-05 Jy ! Component: 100 - total flux cleaned = -0.000363855 Jy ! Component: 150 - total flux cleaned = -0.000529841 Jy ! Component: 200 - total flux cleaned = -0.000673074 Jy ! Total flux subtracted in 200 components = -0.000673074 Jy ! Clean residual min=-0.003942 max=0.004371 Jy/beam ! Clean residual mean=0.000012 rms=0.001063 Jy/beam ! Combined flux in latest and established models = 0.235174 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 21 components and 0.235174 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.328 mas, bmaj=3.792 mas, bpa=7.848 degrees ! Estimated noise=1.27349 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000961259 Jy ! Component: 100 - total flux cleaned = -0.000981899 Jy ! Component: 150 - total flux cleaned = -0.000966849 Jy ! Component: 200 - total flux cleaned = -0.000966395 Jy ! Total flux subtracted in 200 components = -0.000966395 Jy ! Clean residual min=-0.003607 max=0.003295 Jy/beam ! Clean residual mean=0.000024 rms=0.001042 Jy/beam ! Combined flux in latest and established models = 0.234207 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 27 components and 0.234207 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8681 mas, bmaj=2.163 mas, bpa=-3.225 degrees ! Estimated noise=0.971628 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000661166 Jy ! Component: 100 - total flux cleaned = 0.000581983 Jy ! Component: 150 - total flux cleaned = 0.000513619 Jy ! Component: 200 - total flux cleaned = 0.000420623 Jy ! Total flux subtracted in 200 components = 0.000420623 Jy ! Clean residual min=-0.003963 max=0.004227 Jy/beam ! Clean residual mean=0.000011 rms=0.001047 Jy/beam ! Combined flux in latest and established models = 0.234628 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 31 components and 0.234628 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067899Jy sigma=0.976387 ! Fit after self-cal, rms=0.067917Jy sigma=0.976349 wmodel J0106-0315_X_2005_07_20_yyk\_map.mod ! Writing 31 model components to file: J0106-0315_X_2005_07_20_yyk_map.mod wobs J0106-0315_X_2005_07_20_yyk\_uvs.fits ! Writing UV FITS file: J0106-0315_X_2005_07_20_yyk_uvs.fits wwins J0106-0315_X_2005_07_20_yyk\_map.win ! wwins: Wrote 1 windows to J0106-0315_X_2005_07_20_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00083293 Jy ! Component: 100 - total flux cleaned = 0.00156913 Jy ! Component: 150 - total flux cleaned = 0.00237334 Jy ! Component: 200 - total flux cleaned = 0.00307176 Jy ! Component: 250 - total flux cleaned = 0.00368328 Jy ! Component: 300 - total flux cleaned = 0.00416651 Jy ! Component: 350 - total flux cleaned = 0.00478531 Jy ! Component: 400 - total flux cleaned = 0.00523228 Jy ! Component: 450 - total flux cleaned = 0.00537702 Jy ! Component: 500 - total flux cleaned = 0.0054244 Jy ! Component: 550 - total flux cleaned = 0.00542535 Jy ! Component: 600 - total flux cleaned = 0.00546939 Jy ! Component: 650 - total flux cleaned = 0.00542586 Jy ! Component: 700 - total flux cleaned = 0.00551078 Jy ! Component: 750 - total flux cleaned = 0.00555205 Jy ! Component: 800 - total flux cleaned = 0.00559205 Jy ! Component: 850 - total flux cleaned = 0.00551251 Jy ! Component: 900 - total flux cleaned = 0.00543525 Jy ! Component: 950 - total flux cleaned = 0.00551257 Jy ! Component: 1000 - total flux cleaned = 0.00551266 Jy ! Component: 1050 - total flux cleaned = 0.0055865 Jy ! Component: 1100 - total flux cleaned = 0.00558703 Jy ! Component: 1150 - total flux cleaned = 0.00569549 Jy ! Component: 1200 - total flux cleaned = 0.00583733 Jy ! Component: 1250 - total flux cleaned = 0.0059769 Jy ! Component: 1300 - total flux cleaned = 0.00601148 Jy ! Component: 1350 - total flux cleaned = 0.00607964 Jy ! Component: 1400 - total flux cleaned = 0.00624684 Jy ! Component: 1450 - total flux cleaned = 0.00631235 Jy ! Component: 1500 - total flux cleaned = 0.00637731 Jy ! Component: 1550 - total flux cleaned = 0.00640926 Jy ! Component: 1600 - total flux cleaned = 0.00653521 Jy ! Component: 1650 - total flux cleaned = 0.00656575 Jy ! Component: 1700 - total flux cleaned = 0.00659648 Jy ! Component: 1750 - total flux cleaned = 0.00668786 Jy ! Component: 1800 - total flux cleaned = 0.00680777 Jy ! Component: 1850 - total flux cleaned = 0.00686625 Jy ! Component: 1900 - total flux cleaned = 0.00686582 Jy ! Component: 1950 - total flux cleaned = 0.00692422 Jy ! Component: 2000 - total flux cleaned = 0.00703882 Jy ! Total flux subtracted in 2048 components = 0.00709535 Jy ! Clean residual min=-0.001615 max=0.001606 Jy/beam ! Clean residual mean=0.000009 rms=0.000534 Jy/beam ! Combined flux in latest and established models = 0.241723 Jy keep ! Adding 145 model components to the UV plane model. ! The established model now contains 176 components and 0.241723 Jy ![Exited script file: muppet] wmap "J0106-0315_X_2005_07_20_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8681 x 2.163 at -3.225 degrees (North through East) ! Clean map min=-0.002808 max=0.21982 Jy/beam ! Writing clean map to FITS file: J0106-0315_X_2005_07_20_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.219816 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000529423 device "J0106-0315_X_2005_07_20_yyk\_map.eps/VPS" ! Attempting to open device: 'J0106-0315_X_2005_07_20_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.722544 0.722544 1.44509 2.89018 5.78035 11.5607 23.1214 46.2428 92.4857 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.219 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8681 x 2.163 at -3.225 degrees (North through East) ! Clean map min=-0.002808 max=0.21982 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0106-0315_X_2005_07_20_yyk\_map.gif/gif" ! Attempting to open device: 'J0106-0315_X_2005_07_20_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0106-0315_X_2005_07_20_yyk_uvs.log closed on Fri Jan 20 09:43:43 2006