! Started logfile: J0106-0315_S_2005_07_20_yyk_uvs.log on Fri Jan 20 09:43:35 2006 obs J0106-0315_S_2005_07_20_yyk_uve.fits ! Reading UV FITS file: J0106-0315_S_2005_07_20_yyk_uve.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.96 visibilities/baseline/integration-bin. ! Found source: J0106-0315 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1526 lines of history. ! ! Reading 1728 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0106-0315_S_2005_07_20_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.237821 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.483 mas, bmaj=6.637 mas, bpa=-2.59 degrees ! Estimated noise=1.31849 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.185679 Jy ! Component: 100 - total flux cleaned = 0.215829 Jy ! Total flux subtracted in 100 components = 0.215829 Jy ! Clean residual min=-0.008273 max=0.010409 Jy/beam ! Clean residual mean=0.000013 rms=0.002098 Jy/beam ! Combined flux in latest and established models = 0.215829 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.215829 Jy ! ! Correcting IF 1. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.080855Jy sigma=1.258634 ! Fit after self-cal, rms=0.080507Jy sigma=1.251601 ! Inverting map and beam ! Estimated beam: bmin=2.483 mas, bmaj=6.637 mas, bpa=-2.59 degrees ! Estimated noise=1.31849 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.246 mas, bmaj=7.854 mas, bpa=-5.059 degrees ! Estimated noise=0.915343 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0116025 Jy ! Component: 100 - total flux cleaned = 0.0161609 Jy ! Component: 150 - total flux cleaned = 0.0173304 Jy ! Component: 200 - total flux cleaned = 0.0180726 Jy ! Total flux subtracted in 200 components = 0.0180726 Jy ! Clean residual min=-0.006942 max=0.007651 Jy/beam ! Clean residual mean=-0.000009 rms=0.002039 Jy/beam ! Combined flux in latest and established models = 0.233902 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 30 components and 0.233902 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078802Jy sigma=1.224471 ! Fit after self-cal, rms=0.078780Jy sigma=1.223976 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.246 x 7.854 at -5.059 degrees (North through East) ! Clean map min=-0.0068073 max=0.20797 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.0206 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00 HN 0.96 KP 0.95 ! LA 1.06 MK 0.95 NL 1.02 OV 0.95 ! PT 1.08 SC 0.86 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00586 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.95 HN 1.03 KP 1.01 ! LA 1.04 MK 1.02 NL 0.99 OV 0.98 ! PT 1.01 SC 0.97 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.954224 ! Telescope amplitude corrections in sub-array 1: ! BR 1.40 FD 0.89 HN 1.00 KP 0.94 ! LA 0.93 MK 1.10 NL 1.13 OV 1.01 ! PT 1.11 SC 0.96 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.06237 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.92 HN 0.89 KP 0.89 ! LA 0.80 MK 1.10 NL 0.97 OV 0.84 ! PT 0.97 SC 1.04 ! ! ! Fit before self-cal, rms=0.078780Jy sigma=1.223976 ! Fit after self-cal, rms=0.073244Jy sigma=1.106940 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073244Jy sigma=1.106940 ! Fit after self-cal, rms=0.073228Jy sigma=1.106636 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.262 mas, bmaj=7.998 mas, bpa=-3.707 degrees ! Estimated noise=0.924469 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00243508 Jy ! Component: 100 - total flux cleaned = 0.00237825 Jy ! Component: 150 - total flux cleaned = 0.0023281 Jy ! Component: 200 - total flux cleaned = 0.00224671 Jy ! Total flux subtracted in 200 components = 0.00224671 Jy ! Clean residual min=-0.003865 max=0.004258 Jy/beam ! Clean residual mean=0.000063 rms=0.001125 Jy/beam ! Combined flux in latest and established models = 0.236148 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 37 components and 0.236148 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073019Jy sigma=1.104756 ! Fit after self-cal, rms=0.073000Jy sigma=1.104391 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073000Jy sigma=1.104391 ! Fit after self-cal, rms=0.070533Jy sigma=1.049581 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000222328 Jy ! Component: 100 - total flux cleaned = 0.000223006 Jy ! Component: 150 - total flux cleaned = 0.000176954 Jy ! Component: 200 - total flux cleaned = 9.73929e-05 Jy ! Total flux subtracted in 200 components = 9.73929e-05 Jy ! Clean residual min=-0.003430 max=0.004071 Jy/beam ! Clean residual mean=0.000063 rms=0.001075 Jy/beam ! Combined flux in latest and established models = 0.236246 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 40 components and 0.236246 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070440Jy sigma=1.048461 ! Fit after self-cal, rms=0.070450Jy sigma=1.044904 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.262 x 7.998 at -3.707 degrees (North through East) ! Clean map min=-0.0032706 max=0.2127 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070450Jy sigma=1.044904 ! Fit after self-cal, rms=0.066249Jy sigma=0.982559 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066249Jy sigma=0.982559 ! Fit after self-cal, rms=0.066320Jy sigma=0.982194 ! Inverting map and beam ! Estimated beam: bmin=3.248 mas, bmaj=7.993 mas, bpa=-3.94 degrees ! Estimated noise=0.920574 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00045284 Jy ! Component: 100 - total flux cleaned = -0.000448429 Jy ! Component: 150 - total flux cleaned = -0.000446326 Jy ! Component: 200 - total flux cleaned = -0.000483492 Jy ! Total flux subtracted in 200 components = -0.000483492 Jy ! Clean residual min=-0.003365 max=0.003506 Jy/beam ! Clean residual mean=0.000058 rms=0.000970 Jy/beam ! Combined flux in latest and established models = 0.235762 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 46 components and 0.235762 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066279Jy sigma=0.981034 ! Fit after self-cal, rms=0.066316Jy sigma=0.980977 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066316Jy sigma=0.980977 ! Fit after self-cal, rms=0.065394Jy sigma=0.957823 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065394Jy sigma=0.957823 ! Fit after self-cal, rms=0.065402Jy sigma=0.957789 ! Inverting map and beam ! Estimated beam: bmin=3.233 mas, bmaj=8.01 mas, bpa=-4.195 degrees ! Estimated noise=0.921958 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000804844 Jy ! Component: 100 - total flux cleaned = 0.000804938 Jy ! Component: 150 - total flux cleaned = 0.000806049 Jy ! Component: 200 - total flux cleaned = 0.000775966 Jy ! Total flux subtracted in 200 components = 0.000775966 Jy ! Clean residual min=-0.003025 max=0.003305 Jy/beam ! Clean residual mean=0.000060 rms=0.000937 Jy/beam ! Combined flux in latest and established models = 0.236538 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 47 components and 0.236538 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065364Jy sigma=0.956984 ! Fit after self-cal, rms=0.065370Jy sigma=0.956970 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.945 mas, bmaj=13.05 mas, bpa=4.844 degrees ! Estimated noise=1.1727 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000508183 Jy ! Component: 100 - total flux cleaned = 0.000488591 Jy ! Component: 150 - total flux cleaned = 0.000471609 Jy ! Component: 200 - total flux cleaned = 0.000471666 Jy ! Total flux subtracted in 200 components = 0.000471666 Jy ! Clean residual min=-0.003103 max=0.004337 Jy/beam ! Clean residual mean=0.000119 rms=0.001348 Jy/beam ! Combined flux in latest and established models = 0.23701 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 52 components and 0.23701 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065362Jy sigma=0.956989 ! Fit after self-cal, rms=0.065367Jy sigma=0.956917 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.486 mas, bmaj=6.689 mas, bpa=-1.984 degrees ! Estimated noise=1.30254 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.184327 Jy ! Component: 100 - total flux cleaned = 0.212459 Jy ! Component: 150 - total flux cleaned = 0.22328 Jy ! Component: 200 - total flux cleaned = 0.229002 Jy ! Total flux subtracted in 200 components = 0.229002 Jy ! Clean residual min=-0.004378 max=0.004136 Jy/beam ! Clean residual mean=0.000020 rms=0.001093 Jy/beam ! Combined flux in latest and established models = 0.229002 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.229002 Jy ! Inverting map and beam ! Estimated beam: bmin=3.233 mas, bmaj=8.01 mas, bpa=-4.195 degrees ! Estimated noise=0.921958 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00389931 Jy ! Component: 100 - total flux cleaned = 0.00562071 Jy ! Component: 150 - total flux cleaned = 0.00625221 Jy ! Component: 200 - total flux cleaned = 0.00637216 Jy ! Total flux subtracted in 200 components = 0.00637216 Jy ! Clean residual min=-0.002763 max=0.003331 Jy/beam ! Clean residual mean=0.000065 rms=0.000943 Jy/beam ! Combined flux in latest and established models = 0.235374 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 49 components and 0.235374 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.945 mas, bmaj=13.05 mas, bpa=4.844 degrees ! Estimated noise=1.1727 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000818967 Jy ! Component: 100 - total flux cleaned = 0.000880357 Jy ! Component: 150 - total flux cleaned = 0.000934998 Jy ! Component: 200 - total flux cleaned = 0.0009854 Jy ! Total flux subtracted in 200 components = 0.0009854 Jy ! Clean residual min=-0.003028 max=0.004271 Jy/beam ! Clean residual mean=0.000125 rms=0.001369 Jy/beam ! Combined flux in latest and established models = 0.236359 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 52 components and 0.236359 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.233 mas, bmaj=8.01 mas, bpa=-4.195 degrees ! Estimated noise=0.921958 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000386821 Jy ! Component: 100 - total flux cleaned = -0.000385937 Jy ! Component: 150 - total flux cleaned = -0.000385513 Jy ! Component: 200 - total flux cleaned = -0.000400839 Jy ! Total flux subtracted in 200 components = -0.000400839 Jy ! Clean residual min=-0.002776 max=0.003355 Jy/beam ! Clean residual mean=0.000062 rms=0.000936 Jy/beam ! Combined flux in latest and established models = 0.235958 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 59 components and 0.235958 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065361Jy sigma=0.956187 ! Fit after self-cal, rms=0.065364Jy sigma=0.956155 wmodel J0106-0315_S_2005_07_20_yyk\_map.mod ! Writing 59 model components to file: J0106-0315_S_2005_07_20_yyk_map.mod wobs J0106-0315_S_2005_07_20_yyk\_uvs.fits ! Writing UV FITS file: J0106-0315_S_2005_07_20_yyk_uvs.fits wwins J0106-0315_S_2005_07_20_yyk\_map.win ! wwins: Wrote 1 windows to J0106-0315_S_2005_07_20_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00149782 Jy ! Component: 100 - total flux cleaned = 0.00217898 Jy ! Component: 150 - total flux cleaned = 0.0025648 Jy ! Component: 200 - total flux cleaned = 0.00279384 Jy ! Component: 250 - total flux cleaned = 0.00279349 Jy ! Component: 300 - total flux cleaned = 0.00296324 Jy ! Component: 350 - total flux cleaned = 0.00300414 Jy ! Component: 400 - total flux cleaned = 0.00308407 Jy ! Component: 450 - total flux cleaned = 0.00316096 Jy ! Component: 500 - total flux cleaned = 0.0030077 Jy ! Component: 550 - total flux cleaned = 0.00293342 Jy ! Component: 600 - total flux cleaned = 0.00282397 Jy ! Component: 650 - total flux cleaned = 0.00278823 Jy ! Component: 700 - total flux cleaned = 0.00282246 Jy ! Component: 750 - total flux cleaned = 0.00278816 Jy ! Component: 800 - total flux cleaned = 0.00282123 Jy ! Component: 850 - total flux cleaned = 0.00288627 Jy ! Component: 900 - total flux cleaned = 0.00288599 Jy ! Component: 950 - total flux cleaned = 0.00304356 Jy ! Component: 1000 - total flux cleaned = 0.00313668 Jy ! Component: 1050 - total flux cleaned = 0.00325855 Jy ! Component: 1100 - total flux cleaned = 0.00322816 Jy ! Component: 1150 - total flux cleaned = 0.0033473 Jy ! Component: 1200 - total flux cleaned = 0.00334712 Jy ! Component: 1250 - total flux cleaned = 0.00334781 Jy ! Component: 1300 - total flux cleaned = 0.00337646 Jy ! Component: 1350 - total flux cleaned = 0.00340475 Jy ! Component: 1400 - total flux cleaned = 0.00337692 Jy ! Component: 1450 - total flux cleaned = 0.00337677 Jy ! Component: 1500 - total flux cleaned = 0.00334983 Jy ! Component: 1550 - total flux cleaned = 0.0034562 Jy ! Component: 1600 - total flux cleaned = 0.00332537 Jy ! Component: 1650 - total flux cleaned = 0.00337733 Jy ! Component: 1700 - total flux cleaned = 0.00345371 Jy ! Component: 1750 - total flux cleaned = 0.00352892 Jy ! Component: 1800 - total flux cleaned = 0.00350427 Jy ! Component: 1850 - total flux cleaned = 0.00352919 Jy ! Component: 1900 - total flux cleaned = 0.00360219 Jy ! Component: 1950 - total flux cleaned = 0.00372195 Jy ! Component: 2000 - total flux cleaned = 0.00376932 Jy ! Total flux subtracted in 2048 components = 0.00374602 Jy ! Clean residual min=-0.001424 max=0.001388 Jy/beam ! Clean residual mean=0.000031 rms=0.000501 Jy/beam ! Combined flux in latest and established models = 0.239704 Jy keep ! Adding 150 model components to the UV plane model. ! The established model now contains 209 components and 0.239704 Jy ![Exited script file: muppet] wmap "J0106-0315_S_2005_07_20_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.233 x 8.01 at -4.195 degrees (North through East) ! Clean map min=-0.0026825 max=0.21445 Jy/beam ! Writing clean map to FITS file: J0106-0315_S_2005_07_20_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.214447 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000501973 device "J0106-0315_S_2005_07_20_yyk\_map.eps/VPS" ! Attempting to open device: 'J0106-0315_S_2005_07_20_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.702235 0.702235 1.40447 2.80894 5.61788 11.2358 22.4715 44.9431 89.8861 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.214 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.233 x 8.01 at -4.195 degrees (North through East) ! Clean map min=-0.0026825 max=0.21445 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0106-0315_S_2005_07_20_yyk\_map.gif/gif" ! Attempting to open device: 'J0106-0315_S_2005_07_20_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0106-0315_S_2005_07_20_yyk_uvs.log closed on Fri Jan 20 09:43:39 2006