! Started logfile: J0054-1953_X_2005_07_09_yyk_uvs.log on Fri Jan 20 09:42:47 2006 obs J0054-1953_X_2005_07_09_yyk_uve.fits ! Reading UV FITS file: J0054-1953_X_2005_07_09_yyk_uve.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J0054-1953 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1480 lines of history. ! ! Reading 1800 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0054-1953_X_2005_07_09_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.145837 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6654 mas, bmaj=1.675 mas, bpa=2.54 degrees ! Estimated noise=1.5304 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0989271 Jy ! Component: 100 - total flux cleaned = 0.117989 Jy ! Total flux subtracted in 100 components = 0.117989 Jy ! Clean residual min=-0.007604 max=0.011153 Jy/beam ! Clean residual mean=0.000046 rms=0.002034 Jy/beam ! Combined flux in latest and established models = 0.117989 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.117989 Jy ! ! Correcting IF 1. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.076208Jy sigma=1.164466 ! Fit after self-cal, rms=0.075769Jy sigma=1.155019 ! Inverting map and beam ! Estimated beam: bmin=0.6654 mas, bmaj=1.675 mas, bpa=2.54 degrees ! Estimated noise=1.5304 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8923 mas, bmaj=2.13 mas, bpa=0.9976 degrees ! Estimated noise=1.03978 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1, 0.2). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0221537 Jy ! Component: 100 - total flux cleaned = 0.0330035 Jy ! Component: 150 - total flux cleaned = 0.0390021 Jy ! Component: 200 - total flux cleaned = 0.0420038 Jy ! Total flux subtracted in 200 components = 0.0420038 Jy ! Clean residual min=-0.004465 max=0.005374 Jy/beam ! Clean residual mean=-0.000030 rms=0.001362 Jy/beam ! Combined flux in latest and established models = 0.159993 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 36 model components to the UV plane model. ! The established model now contains 47 components and 0.159993 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071270Jy sigma=1.051865 ! Fit after self-cal, rms=0.071105Jy sigma=1.048710 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8923 x 2.13 at 0.9976 degrees (North through East) ! Clean map min=-0.0042605 max=0.11945 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01176 ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.02 HN 1.00* KP 0.97 ! LA 0.98 MK 1.03 NL 1.03 OV 1.05 ! PT 0.94 SC 0.96 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.03474 ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.98 HN 1.00* KP 0.95 ! LA 0.94 MK 1.00 NL 0.96 OV 1.03 ! PT 0.96 SC 0.93 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.993771 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 1.00* KP 0.90 ! LA 1.00 MK 0.94 NL 1.07 OV 1.12 ! PT 1.11 SC 0.93 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.071105Jy sigma=1.048710 ! Fit after self-cal, rms=0.070152Jy sigma=1.037672 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070152Jy sigma=1.037672 ! Fit after self-cal, rms=0.070157Jy sigma=1.037636 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8845 mas, bmaj=2.103 mas, bpa=2.012 degrees ! Estimated noise=1.03526 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00234786 Jy ! Component: 100 - total flux cleaned = 0.0029219 Jy ! Component: 150 - total flux cleaned = 0.00324403 Jy ! Component: 200 - total flux cleaned = 0.0033723 Jy ! Total flux subtracted in 200 components = 0.0033723 Jy ! Clean residual min=-0.003878 max=0.005009 Jy/beam ! Clean residual mean=-0.000028 rms=0.001203 Jy/beam ! Combined flux in latest and established models = 0.163365 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 67 components and 0.163365 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069976Jy sigma=1.034774 ! Fit after self-cal, rms=0.069952Jy sigma=1.034401 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069952Jy sigma=1.034401 ! Fit after self-cal, rms=0.067264Jy sigma=0.985464 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137313 Jy ! Component: 100 - total flux cleaned = 0.00154557 Jy ! Component: 150 - total flux cleaned = 0.00151183 Jy ! Component: 200 - total flux cleaned = 0.00151129 Jy ! Total flux subtracted in 200 components = 0.00151129 Jy ! Clean residual min=-0.003631 max=0.004751 Jy/beam ! Clean residual mean=-0.000023 rms=0.001160 Jy/beam ! Combined flux in latest and established models = 0.164877 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 79 components and 0.164877 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067221Jy sigma=0.984544 ! Fit after self-cal, rms=0.066990Jy sigma=0.979179 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8845 x 2.103 at 2.012 degrees (North through East) ! Clean map min=-0.0036721 max=0.11982 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066990Jy sigma=0.979179 ! Fit after self-cal, rms=0.065469Jy sigma=0.970628 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065469Jy sigma=0.970628 ! Fit after self-cal, rms=0.065506Jy sigma=0.969803 ! Inverting map and beam ! Estimated beam: bmin=0.8739 mas, bmaj=2.093 mas, bpa=2.945 degrees ! Estimated noise=1.01302 mJy/beam. ! Added new window around map position (4.2, 0.6). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00403956 Jy ! Component: 100 - total flux cleaned = 0.00372772 Jy ! Component: 150 - total flux cleaned = 0.00341994 Jy ! Component: 200 - total flux cleaned = 0.00309971 Jy ! Total flux subtracted in 200 components = 0.00309971 Jy ! Clean residual min=-0.003274 max=0.003406 Jy/beam ! Clean residual mean=-0.000013 rms=0.000959 Jy/beam ! Combined flux in latest and established models = 0.167976 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 34 model components to the UV plane model. ! The established model now contains 111 components and 0.167976 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065112Jy sigma=0.962081 ! Fit after self-cal, rms=0.065141Jy sigma=0.961528 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065141Jy sigma=0.961528 ! Fit after self-cal, rms=0.065537Jy sigma=0.951505 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065537Jy sigma=0.951505 ! Fit after self-cal, rms=0.065595Jy sigma=0.951331 ! Inverting map and beam ! Estimated beam: bmin=0.8757 mas, bmaj=2.086 mas, bpa=3.228 degrees ! Estimated noise=1.015 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000668924 Jy ! Component: 100 - total flux cleaned = 0.00067602 Jy ! Component: 150 - total flux cleaned = 0.000677196 Jy ! Component: 200 - total flux cleaned = 0.000637518 Jy ! Total flux subtracted in 200 components = 0.000637518 Jy ! Clean residual min=-0.003292 max=0.003308 Jy/beam ! Clean residual mean=-0.000021 rms=0.000930 Jy/beam ! Combined flux in latest and established models = 0.168614 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 126 components and 0.168614 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065505Jy sigma=0.950019 ! Fit after self-cal, rms=0.065535Jy sigma=0.949900 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.515 mas, bmaj=5.189 mas, bpa=10.34 degrees ! Estimated noise=1.29254 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -4.838e-05 Jy ! Component: 100 - total flux cleaned = 2.18054e-05 Jy ! Component: 150 - total flux cleaned = -3.21726e-05 Jy ! Component: 200 - total flux cleaned = -7.73303e-05 Jy ! Total flux subtracted in 200 components = -7.73303e-05 Jy ! Clean residual min=-0.003734 max=0.004279 Jy/beam ! Clean residual mean=-0.000043 rms=0.001386 Jy/beam ! Combined flux in latest and established models = 0.168537 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 142 components and 0.168537 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065513Jy sigma=0.949587 ! Fit after self-cal, rms=0.065527Jy sigma=0.949546 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6596 mas, bmaj=1.657 mas, bpa=3.564 degrees ! Estimated noise=1.49261 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0980654 Jy ! Component: 100 - total flux cleaned = 0.12064 Jy ! Component: 150 - total flux cleaned = 0.133464 Jy ! Component: 200 - total flux cleaned = 0.142192 Jy ! Total flux subtracted in 200 components = 0.142192 Jy ! Clean residual min=-0.005526 max=0.004672 Jy/beam ! Clean residual mean=0.000028 rms=0.001386 Jy/beam ! Combined flux in latest and established models = 0.142192 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.142192 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8757 mas, bmaj=2.086 mas, bpa=3.228 degrees ! Estimated noise=1.015 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.011229 Jy ! Component: 100 - total flux cleaned = 0.0176322 Jy ! Component: 150 - total flux cleaned = 0.0213104 Jy ! Component: 200 - total flux cleaned = 0.0232104 Jy ! Total flux subtracted in 200 components = 0.0232104 Jy ! Clean residual min=-0.003811 max=0.003399 Jy/beam ! Clean residual mean=-0.000022 rms=0.000964 Jy/beam ! Combined flux in latest and established models = 0.165402 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 83 components and 0.165402 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.515 mas, bmaj=5.189 mas, bpa=10.34 degrees ! Estimated noise=1.29254 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00296942 Jy ! Component: 100 - total flux cleaned = 0.00356032 Jy ! Component: 150 - total flux cleaned = 0.00368502 Jy ! Component: 200 - total flux cleaned = 0.00388566 Jy ! Total flux subtracted in 200 components = 0.00388566 Jy ! Clean residual min=-0.003864 max=0.004438 Jy/beam ! Clean residual mean=-0.000043 rms=0.001399 Jy/beam ! Combined flux in latest and established models = 0.169288 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 120 components and 0.169288 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8757 mas, bmaj=2.086 mas, bpa=3.228 degrees ! Estimated noise=1.015 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000224514 Jy ! Component: 100 - total flux cleaned = -0.000228745 Jy ! Component: 150 - total flux cleaned = -0.000280925 Jy ! Component: 200 - total flux cleaned = -0.000280755 Jy ! Total flux subtracted in 200 components = -0.000280755 Jy ! Clean residual min=-0.003422 max=0.003347 Jy/beam ! Clean residual mean=-0.000022 rms=0.000938 Jy/beam ! Combined flux in latest and established models = 0.169007 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 138 components and 0.169007 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065530Jy sigma=0.950888 ! Fit after self-cal, rms=0.065525Jy sigma=0.950601 wmodel J0054-1953_X_2005_07_09_yyk\_map.mod ! Writing 138 model components to file: J0054-1953_X_2005_07_09_yyk_map.mod wobs J0054-1953_X_2005_07_09_yyk\_uvs.fits ! Writing UV FITS file: J0054-1953_X_2005_07_09_yyk_uvs.fits wwins J0054-1953_X_2005_07_09_yyk\_map.win ! wwins: Wrote 3 windows to J0054-1953_X_2005_07_09_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000222747 Jy ! Component: 100 - total flux cleaned = 0.000555166 Jy ! Component: 150 - total flux cleaned = 0.000974184 Jy ! Component: 200 - total flux cleaned = 0.00137167 Jy ! Component: 250 - total flux cleaned = 0.0017062 Jy ! Component: 300 - total flux cleaned = 0.00198317 Jy ! Component: 350 - total flux cleaned = 0.00225276 Jy ! Component: 400 - total flux cleaned = 0.00260035 Jy ! Component: 450 - total flux cleaned = 0.00276963 Jy ! Component: 500 - total flux cleaned = 0.00289373 Jy ! Component: 550 - total flux cleaned = 0.00301409 Jy ! Component: 600 - total flux cleaned = 0.00305337 Jy ! Component: 650 - total flux cleaned = 0.00301601 Jy ! Component: 700 - total flux cleaned = 0.00301651 Jy ! Component: 750 - total flux cleaned = 0.00301688 Jy ! Component: 800 - total flux cleaned = 0.00312382 Jy ! Component: 850 - total flux cleaned = 0.00315799 Jy ! Component: 900 - total flux cleaned = 0.00315733 Jy ! Component: 950 - total flux cleaned = 0.00319053 Jy ! Component: 1000 - total flux cleaned = 0.00315793 Jy ! Component: 1050 - total flux cleaned = 0.00312647 Jy ! Component: 1100 - total flux cleaned = 0.00306316 Jy ! Component: 1150 - total flux cleaned = 0.00300151 Jy ! Component: 1200 - total flux cleaned = 0.00294066 Jy ! Component: 1250 - total flux cleaned = 0.00291076 Jy ! Component: 1300 - total flux cleaned = 0.00291064 Jy ! Component: 1350 - total flux cleaned = 0.00291027 Jy ! Component: 1400 - total flux cleaned = 0.00285336 Jy ! Component: 1450 - total flux cleaned = 0.00274158 Jy ! Component: 1500 - total flux cleaned = 0.0027147 Jy ! Component: 1550 - total flux cleaned = 0.00257925 Jy ! Component: 1600 - total flux cleaned = 0.00241894 Jy ! Component: 1650 - total flux cleaned = 0.00236704 Jy ! Component: 1700 - total flux cleaned = 0.00226321 Jy ! Component: 1750 - total flux cleaned = 0.00213474 Jy ! Component: 1800 - total flux cleaned = 0.00210968 Jy ! Component: 1850 - total flux cleaned = 0.00203444 Jy ! Component: 1900 - total flux cleaned = 0.00198484 Jy ! Component: 1950 - total flux cleaned = 0.00196003 Jy ! Component: 2000 - total flux cleaned = 0.00186341 Jy ! Total flux subtracted in 2048 components = 0.00181596 Jy ! Clean residual min=-0.001374 max=0.001316 Jy/beam ! Clean residual mean=-0.000010 rms=0.000461 Jy/beam ! Combined flux in latest and established models = 0.170823 Jy keep ! Adding 125 model components to the UV plane model. ! The established model now contains 263 components and 0.170823 Jy ![Exited script file: muppet] wmap "J0054-1953_X_2005_07_09_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8757 x 2.086 at 3.228 degrees (North through East) ! Clean map min=-0.002628 max=0.11864 Jy/beam ! Writing clean map to FITS file: J0054-1953_X_2005_07_09_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.118641 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000458412 device "J0054-1953_X_2005_07_09_yyk\_map.eps/VPS" ! Attempting to open device: 'J0054-1953_X_2005_07_09_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.15916 1.15916 2.31831 4.63663 9.27326 18.5465 37.093 74.1861 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.118 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8757 x 2.086 at 3.228 degrees (North through East) ! Clean map min=-0.002628 max=0.11864 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0054-1953_X_2005_07_09_yyk\_map.gif/gif" ! Attempting to open device: 'J0054-1953_X_2005_07_09_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0054-1953_X_2005_07_09_yyk_uvs.log closed on Fri Jan 20 09:42:51 2006