! Started logfile: J0054-1953_S_2005_07_09_yyk_uvs.log on Fri Jan 20 09:42:42 2006 obs J0054-1953_S_2005_07_09_yyk_uve.fits ! Reading UV FITS file: J0054-1953_S_2005_07_09_yyk_uve.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.98 visibilities/baseline/integration-bin. ! Found source: J0054-1953 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1602 lines of history. ! ! Reading 1764 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0054-1953_S_2005_07_09_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.159452 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.559 mas, bmaj=6.556 mas, bpa=-0.3574 degrees ! Estimated noise=1.68735 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0909043 Jy ! Component: 100 - total flux cleaned = 0.121038 Jy ! Total flux subtracted in 100 components = 0.121038 Jy ! Clean residual min=-0.010106 max=0.013360 Jy/beam ! Clean residual mean=0.000082 rms=0.002902 Jy/beam ! Combined flux in latest and established models = 0.121038 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.121038 Jy ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.106366Jy sigma=1.303214 ! Fit after self-cal, rms=0.104945Jy sigma=1.283960 ! Inverting map and beam ! Estimated beam: bmin=2.559 mas, bmaj=6.556 mas, bpa=-0.3574 degrees ! Estimated noise=1.68735 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.35 mas, bmaj=8.061 mas, bpa=-2.232 degrees ! Estimated noise=1.0459 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0210659 Jy ! Component: 100 - total flux cleaned = 0.0302612 Jy ! Component: 150 - total flux cleaned = 0.034526 Jy ! Component: 200 - total flux cleaned = 0.0356094 Jy ! Total flux subtracted in 200 components = 0.0356094 Jy ! Clean residual min=-0.009799 max=0.010985 Jy/beam ! Clean residual mean=0.000195 rms=0.002926 Jy/beam ! Combined flux in latest and established models = 0.156647 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 49 components and 0.156647 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102022Jy sigma=1.219875 ! Fit after self-cal, rms=0.101964Jy sigma=1.219613 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.35 x 8.061 at -2.232 degrees (North through East) ! Clean map min=-0.0095494 max=0.10628 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.101964Jy sigma=1.219613 ! Fit after self-cal, rms=0.101964Jy sigma=1.219613 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101964Jy sigma=1.219613 ! Fit after self-cal, rms=0.101965Jy sigma=1.219612 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.35 mas, bmaj=8.061 mas, bpa=-2.232 degrees ! Estimated noise=1.0459 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00075033 Jy ! Component: 100 - total flux cleaned = 0.00124245 Jy ! Component: 150 - total flux cleaned = 0.00154437 Jy ! Component: 200 - total flux cleaned = 0.00170997 Jy ! Total flux subtracted in 200 components = 0.00170997 Jy ! Clean residual min=-0.009682 max=0.010694 Jy/beam ! Clean residual mean=0.000187 rms=0.002876 Jy/beam ! Combined flux in latest and established models = 0.158357 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 51 components and 0.158357 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101879Jy sigma=1.218277 ! Fit after self-cal, rms=0.101888Jy sigma=1.218229 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101888Jy sigma=1.218229 ! Fit after self-cal, rms=0.096669Jy sigma=1.161145 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00216373 Jy ! Component: 100 - total flux cleaned = 0.00232063 Jy ! Component: 150 - total flux cleaned = 0.00242134 Jy ! Component: 200 - total flux cleaned = 0.00256389 Jy ! Total flux subtracted in 200 components = 0.00256389 Jy ! Clean residual min=-0.009180 max=0.010531 Jy/beam ! Clean residual mean=0.000184 rms=0.002827 Jy/beam ! Combined flux in latest and established models = 0.160921 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 54 components and 0.160921 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096589Jy sigma=1.160022 ! Fit after self-cal, rms=0.095748Jy sigma=1.154068 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.35 x 8.061 at -2.232 degrees (North through East) ! Clean map min=-0.0088446 max=0.10674 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095748Jy sigma=1.154068 ! Fit after self-cal, rms=0.095748Jy sigma=1.154068 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095748Jy sigma=1.154068 ! Fit after self-cal, rms=0.095579Jy sigma=1.153213 ! Inverting map and beam ! Estimated beam: bmin=3.35 mas, bmaj=8.061 mas, bpa=-2.232 degrees ! Estimated noise=1.0459 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00030839 Jy ! Component: 100 - total flux cleaned = 0.000396684 Jy ! Component: 150 - total flux cleaned = 0.000440328 Jy ! Component: 200 - total flux cleaned = 0.000484329 Jy ! Total flux subtracted in 200 components = 0.000484329 Jy ! Clean residual min=-0.008987 max=0.010386 Jy/beam ! Clean residual mean=0.000182 rms=0.002812 Jy/beam ! Combined flux in latest and established models = 0.161405 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 58 components and 0.161405 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095542Jy sigma=1.152597 ! Fit after self-cal, rms=0.095491Jy sigma=1.152396 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095491Jy sigma=1.152396 ! Fit after self-cal, rms=0.095491Jy sigma=1.152396 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095491Jy sigma=1.152396 ! Fit after self-cal, rms=0.095453Jy sigma=1.152342 ! Inverting map and beam ! Estimated beam: bmin=3.35 mas, bmaj=8.061 mas, bpa=-2.232 degrees ! Estimated noise=1.0459 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -3.13398e-06 Jy ! Component: 100 - total flux cleaned = 3.48173e-05 Jy ! Component: 150 - total flux cleaned = 7.48188e-05 Jy ! Component: 200 - total flux cleaned = 0.000116755 Jy ! Total flux subtracted in 200 components = 0.000116755 Jy ! Clean residual min=-0.008961 max=0.010270 Jy/beam ! Clean residual mean=0.000181 rms=0.002804 Jy/beam ! Combined flux in latest and established models = 0.161522 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 58 components and 0.161522 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095430Jy sigma=1.151799 ! Fit after self-cal, rms=0.095415Jy sigma=1.151748 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.126 mas, bmaj=16.86 mas, bpa=11.61 degrees ! Estimated noise=1.29694 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0045265 Jy ! Component: 100 - total flux cleaned = 0.00512987 Jy ! Component: 150 - total flux cleaned = 0.00563088 Jy ! Component: 200 - total flux cleaned = 0.00606483 Jy ! Total flux subtracted in 200 components = 0.00606483 Jy ! Clean residual min=-0.009884 max=0.011863 Jy/beam ! Clean residual mean=0.000294 rms=0.004013 Jy/beam ! Combined flux in latest and established models = 0.167587 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 61 components and 0.167587 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095972Jy sigma=1.156816 ! Fit after self-cal, rms=0.095870Jy sigma=1.155624 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.559 mas, bmaj=6.556 mas, bpa=-0.3574 degrees ! Estimated noise=1.68735 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0964445 Jy ! Component: 100 - total flux cleaned = 0.128172 Jy ! Component: 150 - total flux cleaned = 0.143126 Jy ! Component: 200 - total flux cleaned = 0.150472 Jy ! Total flux subtracted in 200 components = 0.150472 Jy ! Clean residual min=-0.009695 max=0.010192 Jy/beam ! Clean residual mean=0.000057 rms=0.002249 Jy/beam ! Combined flux in latest and established models = 0.150472 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.150472 Jy ! Inverting map and beam ! Estimated beam: bmin=3.35 mas, bmaj=8.061 mas, bpa=-2.232 degrees ! Estimated noise=1.0459 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00716306 Jy ! Component: 100 - total flux cleaned = 0.00768615 Jy ! Component: 150 - total flux cleaned = 0.00812023 Jy ! Component: 200 - total flux cleaned = 0.00848676 Jy ! Total flux subtracted in 200 components = 0.00848676 Jy ! Clean residual min=-0.009292 max=0.010980 Jy/beam ! Clean residual mean=0.000194 rms=0.002960 Jy/beam ! Combined flux in latest and established models = 0.158959 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 42 components and 0.158959 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.126 mas, bmaj=16.86 mas, bpa=11.61 degrees ! Estimated noise=1.29694 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00499536 Jy ! Component: 100 - total flux cleaned = 0.00580575 Jy ! Component: 150 - total flux cleaned = 0.00650104 Jy ! Component: 200 - total flux cleaned = 0.00722871 Jy ! Total flux subtracted in 200 components = 0.00722871 Jy ! Clean residual min=-0.009962 max=0.012096 Jy/beam ! Clean residual mean=0.000307 rms=0.004105 Jy/beam ! Combined flux in latest and established models = 0.166187 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 45 components and 0.166187 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.35 mas, bmaj=8.061 mas, bpa=-2.232 degrees ! Estimated noise=1.0459 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00434418 Jy ! Component: 100 - total flux cleaned = -0.00460448 Jy ! Component: 150 - total flux cleaned = -0.00460948 Jy ! Component: 200 - total flux cleaned = -0.00460948 Jy ! Total flux subtracted in 200 components = -0.00460947 Jy ! Clean residual min=-0.008939 max=0.010133 Jy/beam ! Clean residual mean=0.000181 rms=0.002779 Jy/beam ! Combined flux in latest and established models = 0.161578 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 56 components and 0.161578 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095398Jy sigma=1.151025 ! Fit after self-cal, rms=0.095404Jy sigma=1.150795 wmodel J0054-1953_S_2005_07_09_yyk\_map.mod ! Writing 56 model components to file: J0054-1953_S_2005_07_09_yyk_map.mod wobs J0054-1953_S_2005_07_09_yyk\_uvs.fits ! Writing UV FITS file: J0054-1953_S_2005_07_09_yyk_uvs.fits wwins J0054-1953_S_2005_07_09_yyk\_map.win ! wwins: Wrote 1 windows to J0054-1953_S_2005_07_09_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0030848 Jy ! Component: 100 - total flux cleaned = 0.00555675 Jy ! Component: 150 - total flux cleaned = 0.00752621 Jy ! Component: 200 - total flux cleaned = 0.00896701 Jy ! Component: 250 - total flux cleaned = 0.00946221 Jy ! Component: 300 - total flux cleaned = 0.00969436 Jy ! Component: 350 - total flux cleaned = 0.00958386 Jy ! Component: 400 - total flux cleaned = 0.00968682 Jy ! Component: 450 - total flux cleaned = 0.00988263 Jy ! Component: 500 - total flux cleaned = 0.00997533 Jy ! Component: 550 - total flux cleaned = 0.00997445 Jy ! Component: 600 - total flux cleaned = 0.0101504 Jy ! Component: 650 - total flux cleaned = 0.0100651 Jy ! Component: 700 - total flux cleaned = 0.0103131 Jy ! Component: 750 - total flux cleaned = 0.0107113 Jy ! Component: 800 - total flux cleaned = 0.0113272 Jy ! Component: 850 - total flux cleaned = 0.0114772 Jy ! Component: 900 - total flux cleaned = 0.0117733 Jy ! Component: 950 - total flux cleaned = 0.0122041 Jy ! Component: 1000 - total flux cleaned = 0.0125546 Jy ! Component: 1050 - total flux cleaned = 0.0130339 Jy ! Component: 1100 - total flux cleaned = 0.0137011 Jy ! Component: 1150 - total flux cleaned = 0.0141591 Jy ! Component: 1200 - total flux cleaned = 0.0147994 Jy ! Component: 1250 - total flux cleaned = 0.0154891 Jy ! Component: 1300 - total flux cleaned = 0.0161032 Jy ! Component: 1350 - total flux cleaned = 0.0166468 Jy ! Component: 1400 - total flux cleaned = 0.0172408 Jy ! Component: 1450 - total flux cleaned = 0.017765 Jy ! Component: 1500 - total flux cleaned = 0.0183935 Jy ! Component: 1550 - total flux cleaned = 0.0189547 Jy ! Component: 1600 - total flux cleaned = 0.01945 Jy ! Component: 1650 - total flux cleaned = 0.019883 Jy ! Component: 1700 - total flux cleaned = 0.0203635 Jy ! Component: 1750 - total flux cleaned = 0.0210971 Jy ! Component: 1800 - total flux cleaned = 0.0214567 Jy ! Component: 1850 - total flux cleaned = 0.021862 Jy ! Component: 1900 - total flux cleaned = 0.0224103 Jy ! Component: 1950 - total flux cleaned = 0.0227528 Jy ! Component: 2000 - total flux cleaned = 0.0227538 Jy ! Total flux subtracted in 2048 components = 0.0233742 Jy ! Clean residual min=-0.002790 max=0.002980 Jy/beam ! Clean residual mean=0.000061 rms=0.001033 Jy/beam ! Combined flux in latest and established models = 0.184952 Jy keep ! Adding 161 model components to the UV plane model. ! The established model now contains 217 components and 0.184952 Jy ![Exited script file: muppet] wmap "J0054-1953_S_2005_07_09_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.35 x 8.061 at -2.232 degrees (North through East) ! Clean map min=-0.0052426 max=0.10647 Jy/beam ! Writing clean map to FITS file: J0054-1953_S_2005_07_09_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.106469 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00101309 device "J0054-1953_S_2005_07_09_yyk\_map.eps/VPS" ! Attempting to open device: 'J0054-1953_S_2005_07_09_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.85459 2.85459 5.70919 11.4184 22.8368 45.6735 91.347 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.003 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.106 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.35 x 8.061 at -2.232 degrees (North through East) ! Clean map min=-0.0052426 max=0.10647 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0054-1953_S_2005_07_09_yyk\_map.gif/gif" ! Attempting to open device: 'J0054-1953_S_2005_07_09_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0054-1953_S_2005_07_09_yyk_uvs.log closed on Fri Jan 20 09:42:46 2006