! Started logfile: J0053-0727_S_2005_07_08_yyk_uvs.log on Fri Jan 20 09:42:33 2006 obs J0053-0727_S_2005_07_08_yyk_uve.fits ! Reading UV FITS file: J0053-0727_S_2005_07_08_yyk_uve.fits ! AN table 1: 6 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.811111 visibilities/baseline/integration-bin. ! Found source: J0053-0727 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1411 lines of history. ! ! Reading 876 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0053-0727_S_2005_07_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.153598 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.838 mas, bmaj=9.007 mas, bpa=-11.77 degrees ! Estimated noise=1.81569 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.11085 Jy ! Component: 100 - total flux cleaned = 0.140146 Jy ! Total flux subtracted in 100 components = 0.140146 Jy ! Clean residual min=-0.010019 max=0.011103 Jy/beam ! Clean residual mean=-0.000034 rms=0.003040 Jy/beam ! Combined flux in latest and established models = 0.140146 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.140146 Jy ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.069501Jy sigma=1.264811 ! Fit after self-cal, rms=0.069487Jy sigma=1.260322 ! Inverting map and beam ! Estimated beam: bmin=2.838 mas, bmaj=9.007 mas, bpa=-11.77 degrees ! Estimated noise=1.81569 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.66 mas, bmaj=10.86 mas, bpa=-13.14 degrees ! Estimated noise=1.21576 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0179404 Jy ! Component: 100 - total flux cleaned = 0.0281854 Jy ! Component: 150 - total flux cleaned = 0.0332644 Jy ! Component: 200 - total flux cleaned = 0.0351824 Jy ! Total flux subtracted in 200 components = 0.0351824 Jy ! Clean residual min=-0.006837 max=0.006738 Jy/beam ! Clean residual mean=0.000004 rms=0.001997 Jy/beam ! Combined flux in latest and established models = 0.175329 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 57 components and 0.175329 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065432Jy sigma=1.169082 ! Fit after self-cal, rms=0.065412Jy sigma=1.168877 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.66 x 10.86 at -13.14 degrees (North through East) ! Clean map min=-0.0067775 max=0.11899 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.065412Jy sigma=1.168877 ! Fit after self-cal, rms=0.065412Jy sigma=1.168877 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065412Jy sigma=1.168877 ! Fit after self-cal, rms=0.065412Jy sigma=1.168877 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.66 mas, bmaj=10.86 mas, bpa=-13.14 degrees ! Estimated noise=1.21576 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00154246 Jy ! Component: 100 - total flux cleaned = 0.00271246 Jy ! Component: 150 - total flux cleaned = 0.00386697 Jy ! Component: 200 - total flux cleaned = 0.00487905 Jy ! Total flux subtracted in 200 components = 0.00487905 Jy ! Clean residual min=-0.006675 max=0.006260 Jy/beam ! Clean residual mean=-0.000016 rms=0.001814 Jy/beam ! Combined flux in latest and established models = 0.180208 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 57 components and 0.180208 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065205Jy sigma=1.159442 ! Fit after self-cal, rms=0.065195Jy sigma=1.159407 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065195Jy sigma=1.159407 ! Fit after self-cal, rms=0.063725Jy sigma=1.125364 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00188335 Jy ! Component: 100 - total flux cleaned = 0.0026179 Jy ! Component: 150 - total flux cleaned = 0.00325852 Jy ! Component: 200 - total flux cleaned = 0.00375798 Jy ! Total flux subtracted in 200 components = 0.00375798 Jy ! Clean residual min=-0.006711 max=0.006342 Jy/beam ! Clean residual mean=-0.000029 rms=0.001721 Jy/beam ! Combined flux in latest and established models = 0.183966 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 59 components and 0.183966 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063633Jy sigma=1.122151 ! Fit after self-cal, rms=0.063609Jy sigma=1.119765 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.66 x 10.86 at -13.14 degrees (North through East) ! Clean map min=-0.0064989 max=0.11608 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063609Jy sigma=1.119765 ! Fit after self-cal, rms=0.063609Jy sigma=1.119765 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063609Jy sigma=1.119765 ! Fit after self-cal, rms=0.063654Jy sigma=1.119495 ! Inverting map and beam ! Estimated beam: bmin=3.66 mas, bmaj=10.86 mas, bpa=-13.14 degrees ! Estimated noise=1.21576 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000569112 Jy ! Component: 100 - total flux cleaned = 0.00100694 Jy ! Component: 150 - total flux cleaned = 0.00138884 Jy ! Component: 200 - total flux cleaned = 0.00169057 Jy ! Total flux subtracted in 200 components = 0.00169057 Jy ! Clean residual min=-0.006854 max=0.006449 Jy/beam ! Clean residual mean=-0.000036 rms=0.001696 Jy/beam ! Combined flux in latest and established models = 0.185656 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 62 components and 0.185656 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063655Jy sigma=1.118426 ! Fit after self-cal, rms=0.063683Jy sigma=1.118378 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063683Jy sigma=1.118378 ! Fit after self-cal, rms=0.063683Jy sigma=1.118378 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063683Jy sigma=1.118378 ! Fit after self-cal, rms=0.063698Jy sigma=1.118369 ! Inverting map and beam ! Estimated beam: bmin=3.66 mas, bmaj=10.86 mas, bpa=-13.14 degrees ! Estimated noise=1.21576 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000305286 Jy ! Component: 100 - total flux cleaned = 0.000427253 Jy ! Component: 150 - total flux cleaned = 0.000541735 Jy ! Component: 200 - total flux cleaned = 0.000649881 Jy ! Total flux subtracted in 200 components = 0.000649881 Jy ! Clean residual min=-0.006936 max=0.006462 Jy/beam ! Clean residual mean=-0.000039 rms=0.001687 Jy/beam ! Combined flux in latest and established models = 0.186306 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 64 components and 0.186306 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063704Jy sigma=1.117918 ! Fit after self-cal, rms=0.063711Jy sigma=1.117912 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.961 mas, bmaj=14.28 mas, bpa=9.4 degrees ! Estimated noise=1.43454 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00064238 Jy ! Component: 100 - total flux cleaned = 0.000772361 Jy ! Component: 150 - total flux cleaned = 0.000865736 Jy ! Component: 200 - total flux cleaned = 0.000970676 Jy ! Total flux subtracted in 200 components = 0.000970676 Jy ! Clean residual min=-0.006756 max=0.005164 Jy/beam ! Clean residual mean=-0.000086 rms=0.001808 Jy/beam ! Combined flux in latest and established models = 0.187277 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 72 components and 0.187277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063713Jy sigma=1.117949 ! Fit after self-cal, rms=0.063721Jy sigma=1.117917 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.838 mas, bmaj=9.007 mas, bpa=-11.77 degrees ! Estimated noise=1.81569 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.111387 Jy ! Component: 100 - total flux cleaned = 0.140996 Jy ! Component: 150 - total flux cleaned = 0.15648 Jy ! Component: 200 - total flux cleaned = 0.166414 Jy ! Total flux subtracted in 200 components = 0.166414 Jy ! Clean residual min=-0.008069 max=0.009385 Jy/beam ! Clean residual mean=-0.000015 rms=0.002298 Jy/beam ! Combined flux in latest and established models = 0.166415 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 60 model components to the UV plane model. ! The established model now contains 60 components and 0.166415 Jy ! Inverting map and beam ! Estimated beam: bmin=3.66 mas, bmaj=10.86 mas, bpa=-13.14 degrees ! Estimated noise=1.21576 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00609029 Jy ! Component: 100 - total flux cleaned = 0.00816403 Jy ! Component: 150 - total flux cleaned = 0.00988653 Jy ! Component: 200 - total flux cleaned = 0.0113487 Jy ! Total flux subtracted in 200 components = 0.0113487 Jy ! Clean residual min=-0.006659 max=0.006511 Jy/beam ! Clean residual mean=-0.000004 rms=0.001934 Jy/beam ! Combined flux in latest and established models = 0.177763 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 70 components and 0.177763 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.961 mas, bmaj=14.28 mas, bpa=9.4 degrees ! Estimated noise=1.43454 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00476427 Jy ! Component: 100 - total flux cleaned = 0.00564802 Jy ! Component: 150 - total flux cleaned = 0.00620049 Jy ! Component: 200 - total flux cleaned = 0.00667512 Jy ! Total flux subtracted in 200 components = 0.00667512 Jy ! Clean residual min=-0.006473 max=0.005678 Jy/beam ! Clean residual mean=-0.000059 rms=0.001907 Jy/beam ! Combined flux in latest and established models = 0.184438 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 76 components and 0.184438 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.66 mas, bmaj=10.86 mas, bpa=-13.14 degrees ! Estimated noise=1.21576 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000881766 Jy ! Component: 100 - total flux cleaned = -0.000475639 Jy ! Component: 150 - total flux cleaned = -6.1875e-06 Jy ! Component: 200 - total flux cleaned = 0.000442916 Jy ! Total flux subtracted in 200 components = 0.000442916 Jy ! Clean residual min=-0.006935 max=0.006430 Jy/beam ! Clean residual mean=-0.000032 rms=0.001746 Jy/beam ! Combined flux in latest and established models = 0.184881 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 78 components and 0.184881 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063696Jy sigma=1.119567 ! Fit after self-cal, rms=0.063706Jy sigma=1.119429 wmodel J0053-0727_S_2005_07_08_yyk\_map.mod ! Writing 78 model components to file: J0053-0727_S_2005_07_08_yyk_map.mod wobs J0053-0727_S_2005_07_08_yyk\_uvs.fits ! Writing UV FITS file: J0053-0727_S_2005_07_08_yyk_uvs.fits wwins J0053-0727_S_2005_07_08_yyk\_map.win ! wwins: Wrote 1 windows to J0053-0727_S_2005_07_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00136238 Jy ! Component: 100 - total flux cleaned = -0.00198443 Jy ! Component: 150 - total flux cleaned = -0.00217043 Jy ! Component: 200 - total flux cleaned = -0.00216844 Jy ! Component: 250 - total flux cleaned = -0.00225029 Jy ! Component: 300 - total flux cleaned = -0.00224852 Jy ! Component: 350 - total flux cleaned = -0.00201911 Jy ! Component: 400 - total flux cleaned = -0.00180169 Jy ! Component: 450 - total flux cleaned = -0.001177 Jy ! Component: 500 - total flux cleaned = -0.0007789 Jy ! Component: 550 - total flux cleaned = -0.000393638 Jy ! Component: 600 - total flux cleaned = -0.000145121 Jy ! Component: 650 - total flux cleaned = 0.000154343 Jy ! Component: 700 - total flux cleaned = 3.95888e-05 Jy ! Component: 750 - total flux cleaned = 9.57939e-05 Jy ! Component: 800 - total flux cleaned = -1.57183e-05 Jy ! Component: 850 - total flux cleaned = -0.000176016 Jy ! Component: 900 - total flux cleaned = -0.000332364 Jy ! Component: 950 - total flux cleaned = -0.000532638 Jy ! Component: 1000 - total flux cleaned = -0.000680141 Jy ! Component: 1050 - total flux cleaned = -0.000968936 Jy ! Component: 1100 - total flux cleaned = -0.00115746 Jy ! Component: 1150 - total flux cleaned = -0.00134223 Jy ! Component: 1200 - total flux cleaned = -0.00156826 Jy ! Component: 1250 - total flux cleaned = -0.00156872 Jy ! Component: 1300 - total flux cleaned = -0.00170014 Jy ! Component: 1350 - total flux cleaned = -0.00182961 Jy ! Component: 1400 - total flux cleaned = -0.00204209 Jy ! Component: 1450 - total flux cleaned = -0.00220824 Jy ! Component: 1500 - total flux cleaned = -0.00220859 Jy ! Component: 1550 - total flux cleaned = -0.00241237 Jy ! Component: 1600 - total flux cleaned = -0.00261239 Jy ! Component: 1650 - total flux cleaned = -0.00265088 Jy ! Component: 1700 - total flux cleaned = -0.00272971 Jy ! Component: 1750 - total flux cleaned = -0.00284554 Jy ! Component: 1800 - total flux cleaned = -0.00295934 Jy ! Component: 1850 - total flux cleaned = -0.00296042 Jy ! Component: 1900 - total flux cleaned = -0.00318304 Jy ! Component: 1950 - total flux cleaned = -0.0032561 Jy ! Component: 2000 - total flux cleaned = -0.0032915 Jy ! Total flux subtracted in 2048 components = -0.0033633 Jy ! Clean residual min=-0.002041 max=0.001777 Jy/beam ! Clean residual mean=0.000011 rms=0.000741 Jy/beam ! Combined flux in latest and established models = 0.181518 Jy keep ! Adding 145 model components to the UV plane model. ! The established model now contains 223 components and 0.181518 Jy ![Exited script file: muppet] wmap "J0053-0727_S_2005_07_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.66 x 10.86 at -13.14 degrees (North through East) ! Clean map min=-0.0056786 max=0.11666 Jy/beam ! Writing clean map to FITS file: J0053-0727_S_2005_07_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.116662 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000720355 device "J0053-0727_S_2005_07_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J0053-0727_S_2005_07_08_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.85242 1.85242 3.70483 7.40966 14.8193 29.6386 59.2773 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.116 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.66 x 10.86 at -13.14 degrees (North through East) ! Clean map min=-0.0056786 max=0.11666 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0053-0727_S_2005_07_08_yyk\_map.gif/gif" ! Attempting to open device: 'J0053-0727_S_2005_07_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0053-0727_S_2005_07_08_yyk_uvs.log closed on Fri Jan 20 09:42:38 2006