! Started logfile: J0052-2825_S_2005_07_20_yyk_uvs.log on Fri Jan 20 09:42:15 2006 obs J0052-2825_S_2005_07_20_yyk_uve.fits ! Reading UV FITS file: J0052-2825_S_2005_07_20_yyk_uve.fits ! AN table 1: 11 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.892929 visibilities/baseline/integration-bin. ! Found source: J0052-2825 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1527 lines of history. ! ! Reading 1768 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0052-2825_S_2005_07_20_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.215373 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.375 mas, bmaj=6.093 mas, bpa=2.224 degrees ! Estimated noise=1.64929 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.157762 Jy ! Component: 100 - total flux cleaned = 0.190947 Jy ! Total flux subtracted in 100 components = 0.190947 Jy ! Clean residual min=-0.010923 max=0.012299 Jy/beam ! Clean residual mean=-0.000046 rms=0.002601 Jy/beam ! Combined flux in latest and established models = 0.190947 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.190947 Jy ! ! Correcting IF 1. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.079775Jy sigma=1.252823 ! Fit after self-cal, rms=0.079588Jy sigma=1.246706 ! Inverting map and beam ! Estimated beam: bmin=2.375 mas, bmaj=6.093 mas, bpa=2.224 degrees ! Estimated noise=1.64929 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.213 mas, bmaj=7.932 mas, bpa=-1.849 degrees ! Estimated noise=1.12595 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0122002 Jy ! Component: 100 - total flux cleaned = 0.0165452 Jy ! Component: 150 - total flux cleaned = 0.0171411 Jy ! Component: 200 - total flux cleaned = 0.017658 Jy ! Total flux subtracted in 200 components = 0.017658 Jy ! Clean residual min=-0.009356 max=0.012201 Jy/beam ! Clean residual mean=-0.000037 rms=0.003031 Jy/beam ! Combined flux in latest and established models = 0.208605 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 29 components and 0.208605 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076771Jy sigma=1.223969 ! Fit after self-cal, rms=0.076771Jy sigma=1.223822 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.213 x 7.932 at -1.849 degrees (North through East) ! Clean map min=-0.0089277 max=0.17967 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.04802 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.98 HN 1.00* KP 0.95 ! LA 1.01 MK 0.86 NL 0.98 OV 0.93 ! PT 1.03 SC 0.86 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.0437 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.94 HN 1.00* KP 0.96 ! LA 0.96 MK 0.96 NL 0.98 OV 0.98 ! PT 0.93 SC 0.91 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.076771Jy sigma=1.223822 ! Fit after self-cal, rms=0.075749Jy sigma=1.217580 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075749Jy sigma=1.217580 ! Fit after self-cal, rms=0.075750Jy sigma=1.217569 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.141 mas, bmaj=7.784 mas, bpa=-1.547 degrees ! Estimated noise=1.12268 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00211653 Jy ! Component: 100 - total flux cleaned = 0.00282687 Jy ! Component: 150 - total flux cleaned = 0.00332854 Jy ! Component: 200 - total flux cleaned = 0.00367955 Jy ! Total flux subtracted in 200 components = 0.00367955 Jy ! Clean residual min=-0.009107 max=0.012288 Jy/beam ! Clean residual mean=0.000011 rms=0.002977 Jy/beam ! Combined flux in latest and established models = 0.212285 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 32 components and 0.212285 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075397Jy sigma=1.213444 ! Fit after self-cal, rms=0.075399Jy sigma=1.213358 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075399Jy sigma=1.213358 ! Fit after self-cal, rms=0.073214Jy sigma=1.181236 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000757727 Jy ! Component: 100 - total flux cleaned = 0.000993131 Jy ! Component: 150 - total flux cleaned = 0.00121093 Jy ! Component: 200 - total flux cleaned = 0.00134629 Jy ! Total flux subtracted in 200 components = 0.00134629 Jy ! Clean residual min=-0.009120 max=0.012211 Jy/beam ! Clean residual mean=0.000012 rms=0.002930 Jy/beam ! Combined flux in latest and established models = 0.213631 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 35 components and 0.213631 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073073Jy sigma=1.179315 ! Fit after self-cal, rms=0.072979Jy sigma=1.177425 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.141 x 7.784 at -1.547 degrees (North through East) ! Clean map min=-0.0087959 max=0.17638 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072979Jy sigma=1.177425 ! Fit after self-cal, rms=0.068944Jy sigma=1.155340 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068944Jy sigma=1.155340 ! Fit after self-cal, rms=0.068953Jy sigma=1.155168 ! Inverting map and beam ! Estimated beam: bmin=3.104 mas, bmaj=7.71 mas, bpa=-1.409 degrees ! Estimated noise=1.0725 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00716768 Jy ! Component: 100 - total flux cleaned = -0.0071001 Jy ! Component: 150 - total flux cleaned = -0.00703322 Jy ! Component: 200 - total flux cleaned = -0.00685102 Jy ! Total flux subtracted in 200 components = -0.00685102 Jy ! Clean residual min=-0.007359 max=0.010541 Jy/beam ! Clean residual mean=-0.000006 rms=0.002535 Jy/beam ! Combined flux in latest and established models = 0.20678 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 36 components and 0.20678 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069676Jy sigma=1.144923 ! Fit after self-cal, rms=0.069681Jy sigma=1.144847 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069681Jy sigma=1.144847 ! Fit after self-cal, rms=0.068351Jy sigma=1.133387 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068351Jy sigma=1.133387 ! Fit after self-cal, rms=0.068354Jy sigma=1.133371 ! Inverting map and beam ! Estimated beam: bmin=3.094 mas, bmaj=7.691 mas, bpa=-1.455 degrees ! Estimated noise=1.05086 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00331518 Jy ! Component: 100 - total flux cleaned = -0.00319114 Jy ! Component: 150 - total flux cleaned = -0.0031375 Jy ! Component: 200 - total flux cleaned = -0.00303513 Jy ! Total flux subtracted in 200 components = -0.00303513 Jy ! Clean residual min=-0.006843 max=0.009695 Jy/beam ! Clean residual mean=-0.000018 rms=0.002354 Jy/beam ! Combined flux in latest and established models = 0.203745 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 36 components and 0.203745 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068776Jy sigma=1.130205 ! Fit after self-cal, rms=0.068777Jy sigma=1.130148 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.743 mas, bmaj=20.93 mas, bpa=7.969 degrees ! Estimated noise=1.35305 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00313362 Jy ! Component: 100 - total flux cleaned = 0.00361931 Jy ! Component: 150 - total flux cleaned = 0.00392281 Jy ! Component: 200 - total flux cleaned = 0.00434336 Jy ! Total flux subtracted in 200 components = 0.00434336 Jy ! Clean residual min=-0.006665 max=0.010524 Jy/beam ! Clean residual mean=-0.000050 rms=0.003077 Jy/beam ! Combined flux in latest and established models = 0.208088 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 5 model components to the UV plane model. ! The established model now contains 38 components and 0.208088 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068898Jy sigma=1.134264 ! Fit after self-cal, rms=0.068884Jy sigma=1.133405 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.34 mas, bmaj=6.065 mas, bpa=2.266 degrees ! Estimated noise=1.50513 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.145309 Jy ! Component: 100 - total flux cleaned = 0.178267 Jy ! Component: 150 - total flux cleaned = 0.19313 Jy ! Component: 200 - total flux cleaned = 0.201111 Jy ! Total flux subtracted in 200 components = 0.201111 Jy ! Clean residual min=-0.007278 max=0.007635 Jy/beam ! Clean residual mean=-0.000027 rms=0.001822 Jy/beam ! Combined flux in latest and established models = 0.201111 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.201111 Jy ! Inverting map and beam ! Estimated beam: bmin=3.094 mas, bmaj=7.691 mas, bpa=-1.455 degrees ! Estimated noise=1.05086 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000314544 Jy ! Component: 100 - total flux cleaned = 0.000546994 Jy ! Component: 150 - total flux cleaned = 0.000743903 Jy ! Component: 200 - total flux cleaned = 0.000924704 Jy ! Total flux subtracted in 200 components = 0.000924704 Jy ! Clean residual min=-0.007311 max=0.010297 Jy/beam ! Clean residual mean=-0.000013 rms=0.002491 Jy/beam ! Combined flux in latest and established models = 0.202036 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 33 components and 0.202036 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.743 mas, bmaj=20.93 mas, bpa=7.969 degrees ! Estimated noise=1.35305 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00363221 Jy ! Component: 100 - total flux cleaned = 0.00400126 Jy ! Component: 150 - total flux cleaned = 0.00451545 Jy ! Component: 200 - total flux cleaned = 0.00499466 Jy ! Total flux subtracted in 200 components = 0.00499466 Jy ! Clean residual min=-0.006910 max=0.011406 Jy/beam ! Clean residual mean=-0.000044 rms=0.003234 Jy/beam ! Combined flux in latest and established models = 0.20703 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 35 components and 0.20703 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.094 mas, bmaj=7.691 mas, bpa=-1.455 degrees ! Estimated noise=1.05086 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00285835 Jy ! Component: 100 - total flux cleaned = -0.00313394 Jy ! Component: 150 - total flux cleaned = -0.00321454 Jy ! Component: 200 - total flux cleaned = -0.00327294 Jy ! Total flux subtracted in 200 components = -0.00327294 Jy ! Clean residual min=-0.007022 max=0.009706 Jy/beam ! Clean residual mean=-0.000018 rms=0.002347 Jy/beam ! Combined flux in latest and established models = 0.203757 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 48 components and 0.203757 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068737Jy sigma=1.129227 ! Fit after self-cal, rms=0.068728Jy sigma=1.129005 wmodel J0052-2825_S_2005_07_20_yyk\_map.mod ! Writing 48 model components to file: J0052-2825_S_2005_07_20_yyk_map.mod wobs J0052-2825_S_2005_07_20_yyk\_uvs.fits ! Writing UV FITS file: J0052-2825_S_2005_07_20_yyk_uvs.fits wwins J0052-2825_S_2005_07_20_yyk\_map.win ! wwins: Wrote 1 windows to J0052-2825_S_2005_07_20_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0042704 Jy ! Component: 100 - total flux cleaned = 0.00736273 Jy ! Component: 150 - total flux cleaned = 0.00906315 Jy ! Component: 200 - total flux cleaned = 0.010925 Jy ! Component: 250 - total flux cleaned = 0.0118357 Jy ! Component: 300 - total flux cleaned = 0.0123087 Jy ! Component: 350 - total flux cleaned = 0.0129357 Jy ! Component: 400 - total flux cleaned = 0.0134514 Jy ! Component: 450 - total flux cleaned = 0.0137014 Jy ! Component: 500 - total flux cleaned = 0.01418 Jy ! Component: 550 - total flux cleaned = 0.0144086 Jy ! Component: 600 - total flux cleaned = 0.0144833 Jy ! Component: 650 - total flux cleaned = 0.0148467 Jy ! Component: 700 - total flux cleaned = 0.015058 Jy ! Component: 750 - total flux cleaned = 0.0152628 Jy ! Component: 800 - total flux cleaned = 0.0153979 Jy ! Component: 850 - total flux cleaned = 0.0155948 Jy ! Component: 900 - total flux cleaned = 0.0156607 Jy ! Component: 950 - total flux cleaned = 0.0156627 Jy ! Component: 1000 - total flux cleaned = 0.0156636 Jy ! Component: 1050 - total flux cleaned = 0.0158406 Jy ! Component: 1100 - total flux cleaned = 0.0157231 Jy ! Component: 1150 - total flux cleaned = 0.0156671 Jy ! Component: 1200 - total flux cleaned = 0.0156127 Jy ! Component: 1250 - total flux cleaned = 0.0155064 Jy ! Component: 1300 - total flux cleaned = 0.0155584 Jy ! Component: 1350 - total flux cleaned = 0.0154539 Jy ! Component: 1400 - total flux cleaned = 0.0154042 Jy ! Component: 1450 - total flux cleaned = 0.0155029 Jy ! Component: 1500 - total flux cleaned = 0.0154055 Jy ! Component: 1550 - total flux cleaned = 0.0154044 Jy ! Component: 1600 - total flux cleaned = 0.015171 Jy ! Component: 1650 - total flux cleaned = 0.015125 Jy ! Component: 1700 - total flux cleaned = 0.0149891 Jy ! Component: 1750 - total flux cleaned = 0.0149008 Jy ! Component: 1800 - total flux cleaned = 0.0148571 Jy ! Component: 1850 - total flux cleaned = 0.0147711 Jy ! Component: 1900 - total flux cleaned = 0.0146023 Jy ! Component: 1950 - total flux cleaned = 0.0146015 Jy ! Component: 2000 - total flux cleaned = 0.0143976 Jy ! Total flux subtracted in 2048 components = 0.0142378 Jy ! Clean residual min=-0.002217 max=0.002151 Jy/beam ! Clean residual mean=-0.000057 rms=0.000863 Jy/beam ! Combined flux in latest and established models = 0.217995 Jy keep ! Adding 151 model components to the UV plane model. ! The established model now contains 199 components and 0.217995 Jy ![Exited script file: muppet] wmap "J0052-2825_S_2005_07_20_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.094 x 7.691 at -1.455 degrees (North through East) ! Clean map min=-0.0054645 max=0.16373 Jy/beam ! Writing clean map to FITS file: J0052-2825_S_2005_07_20_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.163732 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000855931 device "J0052-2825_S_2005_07_20_yyk\_map.eps/VPS" ! Attempting to open device: 'J0052-2825_S_2005_07_20_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.56829 1.56829 3.13657 6.27315 12.5463 25.0926 50.1852 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0025 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.163 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.094 x 7.691 at -1.455 degrees (North through East) ! Clean map min=-0.0054645 max=0.16373 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0052-2825_S_2005_07_20_yyk\_map.gif/gif" ! Attempting to open device: 'J0052-2825_S_2005_07_20_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0052-2825_S_2005_07_20_yyk_uvs.log closed on Fri Jan 20 09:42:20 2006