! Started logfile: J0050-0929_S_2005_07_09_yyk_uvs.log on Fri Jan 20 09:42:06 2006 obs J0050-0929_S_2005_07_09_yyk_uve.fits ! Reading UV FITS file: J0050-0929_S_2005_07_09_yyk_uve.fits ! AN table 1: 4 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.938889 visibilities/baseline/integration-bin. ! Found source: J0050-0929 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1602 lines of history. ! ! Reading 676 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0050-0929_S_2005_07_09_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.481874 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.756 mas, bmaj=7.055 mas, bpa=-5.599 degrees ! Estimated noise=2.09674 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.401911 Jy ! Component: 100 - total flux cleaned = 0.459553 Jy ! Total flux subtracted in 100 components = 0.459553 Jy ! Clean residual min=-0.012354 max=0.015573 Jy/beam ! Clean residual mean=0.000126 rms=0.004222 Jy/beam ! Combined flux in latest and established models = 0.459553 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.459553 Jy ! ! Correcting IF 1. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.089738Jy sigma=1.538418 ! Fit after self-cal, rms=0.089638Jy sigma=1.534331 ! Inverting map and beam ! Estimated beam: bmin=2.756 mas, bmaj=7.055 mas, bpa=-5.599 degrees ! Estimated noise=2.09674 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.261 mas, bmaj=7.925 mas, bpa=-4.221 degrees ! Estimated noise=1.64144 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.021346 Jy ! Component: 100 - total flux cleaned = 0.0303547 Jy ! Component: 150 - total flux cleaned = 0.0323896 Jy ! Component: 200 - total flux cleaned = 0.0332147 Jy ! Total flux subtracted in 200 components = 0.0332147 Jy ! Clean residual min=-0.012218 max=0.011099 Jy/beam ! Clean residual mean=0.000024 rms=0.003469 Jy/beam ! Combined flux in latest and established models = 0.492767 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 47 components and 0.492767 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084449Jy sigma=1.465051 ! Fit after self-cal, rms=0.084424Jy sigma=1.464701 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.261 x 7.925 at -4.221 degrees (North through East) ! Clean map min=-0.011925 max=0.45334 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.02104 ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.02 HN 1.00 KP 0.98 ! LA 1.08 MK 0.89 NL 0.95 OV 0.97 ! PT 1.04 SC 0.94 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.996737 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00 HN 1.02 KP 0.99 ! LA 1.02 MK 0.99 NL 0.98 OV 0.99 ! PT 1.05 SC 0.94 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.952084 ! Telescope amplitude corrections in sub-array 1: ! BR 1.34 FD 0.94 HN 1.03 KP 1.00 ! LA 0.93 MK 1.10 NL 1.03 OV 1.00 ! PT 1.12 SC 1.02 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.06282 ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.94 HN 0.91 KP 0.92 ! LA 0.79 MK 1.07 NL 0.96 OV 0.88 ! PT 0.97 SC 1.07 ! ! ! Fit before self-cal, rms=0.084424Jy sigma=1.464701 ! Fit after self-cal, rms=0.068316Jy sigma=1.178632 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068316Jy sigma=1.178632 ! Fit after self-cal, rms=0.068304Jy sigma=1.178418 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.285 mas, bmaj=8.023 mas, bpa=-3.581 degrees ! Estimated noise=1.65043 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00442416 Jy ! Component: 100 - total flux cleaned = 0.00504099 Jy ! Component: 150 - total flux cleaned = 0.00528398 Jy ! Component: 200 - total flux cleaned = 0.00528542 Jy ! Total flux subtracted in 200 components = 0.00528542 Jy ! Clean residual min=-0.005730 max=0.006736 Jy/beam ! Clean residual mean=0.000029 rms=0.001653 Jy/beam ! Combined flux in latest and established models = 0.498053 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 61 components and 0.498053 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067842Jy sigma=1.172949 ! Fit after self-cal, rms=0.067821Jy sigma=1.172710 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067821Jy sigma=1.172710 ! Fit after self-cal, rms=0.066526Jy sigma=1.146692 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00013499 Jy ! Component: 100 - total flux cleaned = 0.000190883 Jy ! Component: 150 - total flux cleaned = 0.000192842 Jy ! Component: 200 - total flux cleaned = 0.000193155 Jy ! Total flux subtracted in 200 components = 0.000193155 Jy ! Clean residual min=-0.005657 max=0.006701 Jy/beam ! Clean residual mean=0.000032 rms=0.001632 Jy/beam ! Combined flux in latest and established models = 0.498246 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 67 components and 0.498246 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066412Jy sigma=1.145613 ! Fit after self-cal, rms=0.066392Jy sigma=1.144389 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.285 x 8.023 at -3.581 degrees (North through East) ! Clean map min=-0.0054724 max=0.45833 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066392Jy sigma=1.144389 ! Fit after self-cal, rms=0.052740Jy sigma=0.917761 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052740Jy sigma=0.917761 ! Fit after self-cal, rms=0.052744Jy sigma=0.917672 ! Inverting map and beam ! Estimated beam: bmin=3.271 mas, bmaj=8.025 mas, bpa=-3.598 degrees ! Estimated noise=1.64492 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101879 Jy ! Component: 100 - total flux cleaned = 0.001158 Jy ! Component: 150 - total flux cleaned = 0.00115563 Jy ! Component: 200 - total flux cleaned = 0.00121062 Jy ! Total flux subtracted in 200 components = 0.00121062 Jy ! Clean residual min=-0.005342 max=0.006310 Jy/beam ! Clean residual mean=0.000037 rms=0.001541 Jy/beam ! Combined flux in latest and established models = 0.499457 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 70 components and 0.499457 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052622Jy sigma=0.915382 ! Fit after self-cal, rms=0.052624Jy sigma=0.915328 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052624Jy sigma=0.915328 ! Fit after self-cal, rms=0.051242Jy sigma=0.889089 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051242Jy sigma=0.889089 ! Fit after self-cal, rms=0.051241Jy sigma=0.889084 ! Inverting map and beam ! Estimated beam: bmin=3.265 mas, bmaj=8.027 mas, bpa=-3.767 degrees ! Estimated noise=1.64475 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000447252 Jy ! Component: 100 - total flux cleaned = 0.000497864 Jy ! Component: 150 - total flux cleaned = 0.000499855 Jy ! Component: 200 - total flux cleaned = 0.00053985 Jy ! Total flux subtracted in 200 components = 0.00053985 Jy ! Clean residual min=-0.005305 max=0.006151 Jy/beam ! Clean residual mean=0.000036 rms=0.001517 Jy/beam ! Combined flux in latest and established models = 0.499997 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 76 components and 0.499997 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051176Jy sigma=0.887731 ! Fit after self-cal, rms=0.051175Jy sigma=0.887688 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.895 mas, bmaj=14 mas, bpa=-4.77 degrees ! Estimated noise=2.10567 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000138524 Jy ! Component: 100 - total flux cleaned = 0.000214166 Jy ! Component: 150 - total flux cleaned = 0.000285263 Jy ! Component: 200 - total flux cleaned = 0.000361524 Jy ! Total flux subtracted in 200 components = 0.000361524 Jy ! Clean residual min=-0.005879 max=0.005420 Jy/beam ! Clean residual mean=0.000075 rms=0.001904 Jy/beam ! Combined flux in latest and established models = 0.500358 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 82 components and 0.500358 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051229Jy sigma=0.888275 ! Fit after self-cal, rms=0.051222Jy sigma=0.887959 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.752 mas, bmaj=7.079 mas, bpa=-5.61 degrees ! Estimated noise=2.07703 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.398296 Jy ! Component: 100 - total flux cleaned = 0.456064 Jy ! Component: 150 - total flux cleaned = 0.476961 Jy ! Component: 200 - total flux cleaned = 0.487439 Jy ! Total flux subtracted in 200 components = 0.487439 Jy ! Clean residual min=-0.006652 max=0.006646 Jy/beam ! Clean residual mean=0.000039 rms=0.001872 Jy/beam ! Combined flux in latest and established models = 0.487439 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 40 model components to the UV plane model. ! The established model now contains 40 components and 0.487439 Jy ! Inverting map and beam ! Estimated beam: bmin=3.265 mas, bmaj=8.027 mas, bpa=-3.767 degrees ! Estimated noise=1.64475 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00660711 Jy ! Component: 100 - total flux cleaned = 0.00956583 Jy ! Component: 150 - total flux cleaned = 0.0109251 Jy ! Component: 200 - total flux cleaned = 0.011159 Jy ! Total flux subtracted in 200 components = 0.011159 Jy ! Clean residual min=-0.005321 max=0.006135 Jy/beam ! Clean residual mean=0.000040 rms=0.001511 Jy/beam ! Combined flux in latest and established models = 0.498598 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 62 components and 0.498598 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.895 mas, bmaj=14 mas, bpa=-4.77 degrees ! Estimated noise=2.10567 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000825977 Jy ! Component: 100 - total flux cleaned = 0.00089839 Jy ! Component: 150 - total flux cleaned = 0.000989817 Jy ! Component: 200 - total flux cleaned = 0.00104476 Jy ! Total flux subtracted in 200 components = 0.00104475 Jy ! Clean residual min=-0.005929 max=0.005334 Jy/beam ! Clean residual mean=0.000080 rms=0.001912 Jy/beam ! Combined flux in latest and established models = 0.499642 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 72 components and 0.499642 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.265 mas, bmaj=8.027 mas, bpa=-3.767 degrees ! Estimated noise=1.64475 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000247103 Jy ! Component: 100 - total flux cleaned = -0.000140178 Jy ! Component: 150 - total flux cleaned = -0.00014124 Jy ! Component: 200 - total flux cleaned = -0.000114249 Jy ! Total flux subtracted in 200 components = -0.000114249 Jy ! Clean residual min=-0.005319 max=0.006243 Jy/beam ! Clean residual mean=0.000038 rms=0.001500 Jy/beam ! Combined flux in latest and established models = 0.499528 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 81 components and 0.499528 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051186Jy sigma=0.886531 ! Fit after self-cal, rms=0.051176Jy sigma=0.886428 wmodel J0050-0929_S_2005_07_09_yyk\_map.mod ! Writing 81 model components to file: J0050-0929_S_2005_07_09_yyk_map.mod wobs J0050-0929_S_2005_07_09_yyk\_uvs.fits ! Writing UV FITS file: J0050-0929_S_2005_07_09_yyk_uvs.fits wwins J0050-0929_S_2005_07_09_yyk\_map.win ! wwins: Wrote 1 windows to J0050-0929_S_2005_07_09_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103761 Jy ! Component: 100 - total flux cleaned = 0.0015717 Jy ! Component: 150 - total flux cleaned = 0.00190527 Jy ! Component: 200 - total flux cleaned = 0.00230023 Jy ! Component: 250 - total flux cleaned = 0.00244925 Jy ! Component: 300 - total flux cleaned = 0.00301741 Jy ! Component: 350 - total flux cleaned = 0.00369347 Jy ! Component: 400 - total flux cleaned = 0.00421239 Jy ! Component: 450 - total flux cleaned = 0.00452511 Jy ! Component: 500 - total flux cleaned = 0.00476738 Jy ! Component: 550 - total flux cleaned = 0.00506097 Jy ! Component: 600 - total flux cleaned = 0.00534498 Jy ! Component: 650 - total flux cleaned = 0.00556749 Jy ! Component: 700 - total flux cleaned = 0.00605094 Jy ! Component: 750 - total flux cleaned = 0.0063117 Jy ! Component: 800 - total flux cleaned = 0.0065665 Jy ! Component: 850 - total flux cleaned = 0.00701345 Jy ! Component: 900 - total flux cleaned = 0.00725534 Jy ! Component: 950 - total flux cleaned = 0.00772717 Jy ! Component: 1000 - total flux cleaned = 0.00781846 Jy ! Component: 1050 - total flux cleaned = 0.00795412 Jy ! Component: 1100 - total flux cleaned = 0.00826174 Jy ! Component: 1150 - total flux cleaned = 0.00834671 Jy ! Component: 1200 - total flux cleaned = 0.00851528 Jy ! Component: 1250 - total flux cleaned = 0.00868 Jy ! Component: 1300 - total flux cleaned = 0.00888145 Jy ! Component: 1350 - total flux cleaned = 0.00900017 Jy ! Component: 1400 - total flux cleaned = 0.00911607 Jy ! Component: 1450 - total flux cleaned = 0.00919151 Jy ! Component: 1500 - total flux cleaned = 0.00922876 Jy ! Component: 1550 - total flux cleaned = 0.00919252 Jy ! Component: 1600 - total flux cleaned = 0.00933633 Jy ! Component: 1650 - total flux cleaned = 0.0092651 Jy ! Component: 1700 - total flux cleaned = 0.00926479 Jy ! Component: 1750 - total flux cleaned = 0.0092993 Jy ! Component: 1800 - total flux cleaned = 0.00926512 Jy ! Component: 1850 - total flux cleaned = 0.00919988 Jy ! Component: 1900 - total flux cleaned = 0.00929799 Jy ! Component: 1950 - total flux cleaned = 0.00939334 Jy ! Component: 2000 - total flux cleaned = 0.00942535 Jy ! Total flux subtracted in 2048 components = 0.00951879 Jy ! Clean residual min=-0.001761 max=0.001944 Jy/beam ! Clean residual mean=0.000026 rms=0.000618 Jy/beam ! Combined flux in latest and established models = 0.509047 Jy keep ! Adding 135 model components to the UV plane model. ! The established model now contains 216 components and 0.509047 Jy ![Exited script file: muppet] wmap "J0050-0929_S_2005_07_09_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.265 x 8.027 at -3.767 degrees (North through East) ! Clean map min=-0.0040579 max=0.45853 Jy/beam ! Writing clean map to FITS file: J0050-0929_S_2005_07_09_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.458534 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000613096 device "J0050-0929_S_2005_07_09_yyk\_map.eps/VPS" ! Attempting to open device: 'J0050-0929_S_2005_07_09_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.401124 0.401124 0.802248 1.6045 3.20899 6.41798 12.836 25.6719 51.3439 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.458 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.265 x 8.027 at -3.767 degrees (North through East) ! Clean map min=-0.0040579 max=0.45853 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0050-0929_S_2005_07_09_yyk\_map.gif/gif" ! Attempting to open device: 'J0050-0929_S_2005_07_09_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0050-0929_S_2005_07_09_yyk_uvs.log closed on Fri Jan 20 09:42:10 2006