! Started logfile: J0039-1854_S_2005_07_08_yyk_uvs.log on Fri Jan 20 09:41:40 2006 obs J0039-1854_S_2005_07_08_yyk_uve.fits ! Reading UV FITS file: J0039-1854_S_2005_07_08_yyk_uve.fits ! AN table 1: 5 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J0039-1854 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1412 lines of history. ! ! Reading 900 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0039-1854_S_2005_07_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.196377 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.484 mas, bmaj=6.956 mas, bpa=-1.018 degrees ! Estimated noise=2.06655 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.136167 Jy ! Component: 100 - total flux cleaned = 0.163553 Jy ! Total flux subtracted in 100 components = 0.163553 Jy ! Clean residual min=-0.008862 max=0.010818 Jy/beam ! Clean residual mean=0.000034 rms=0.002695 Jy/beam ! Combined flux in latest and established models = 0.163553 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.163553 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108811Jy sigma=1.325143 ! Fit after self-cal, rms=0.108987Jy sigma=1.312562 ! Inverting map and beam ! Estimated beam: bmin=2.484 mas, bmaj=6.956 mas, bpa=-1.018 degrees ! Estimated noise=2.06655 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.101 mas, bmaj=8.616 mas, bpa=-3.929 degrees ! Estimated noise=1.52898 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00884119 Jy ! Component: 100 - total flux cleaned = 0.0127527 Jy ! Component: 150 - total flux cleaned = 0.0134027 Jy ! Component: 200 - total flux cleaned = 0.013797 Jy ! Total flux subtracted in 200 components = 0.013797 Jy ! Clean residual min=-0.010669 max=0.012063 Jy/beam ! Clean residual mean=-0.000040 rms=0.003217 Jy/beam ! Combined flux in latest and established models = 0.17735 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 37 components and 0.17735 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108362Jy sigma=1.302506 ! Fit after self-cal, rms=0.108338Jy sigma=1.302226 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.101 x 8.616 at -3.929 degrees (North through East) ! Clean map min=-0.01054 max=0.15262 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.02115 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 1.01 KP 0.92 ! LA 1.04 MK 1.00 NL 0.94 OV 0.91 ! PT 1.01 SC 0.96 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.108338Jy sigma=1.302226 ! Fit after self-cal, rms=0.108310Jy sigma=1.299556 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108310Jy sigma=1.299556 ! Fit after self-cal, rms=0.108311Jy sigma=1.299551 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.107 mas, bmaj=8.609 mas, bpa=-3.758 degrees ! Estimated noise=1.52869 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000247253 Jy ! Component: 100 - total flux cleaned = 0.000511967 Jy ! Component: 150 - total flux cleaned = 0.000687519 Jy ! Component: 200 - total flux cleaned = 0.000852381 Jy ! Total flux subtracted in 200 components = 0.000852381 Jy ! Clean residual min=-0.010431 max=0.011757 Jy/beam ! Clean residual mean=0.000003 rms=0.003154 Jy/beam ! Combined flux in latest and established models = 0.178203 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 39 components and 0.178203 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108347Jy sigma=1.298534 ! Fit after self-cal, rms=0.108334Jy sigma=1.298412 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108334Jy sigma=1.298412 ! Fit after self-cal, rms=0.103768Jy sigma=1.177108 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00415725 Jy ! Component: 100 - total flux cleaned = 0.00555255 Jy ! Component: 150 - total flux cleaned = 0.005743 Jy ! Component: 200 - total flux cleaned = 0.00584969 Jy ! Total flux subtracted in 200 components = 0.00584969 Jy ! Clean residual min=-0.008814 max=0.010098 Jy/beam ! Clean residual mean=-0.000038 rms=0.002818 Jy/beam ! Combined flux in latest and established models = 0.184052 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 45 components and 0.184052 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103500Jy sigma=1.174615 ! Fit after self-cal, rms=0.103438Jy sigma=1.150663 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.107 x 8.609 at -3.758 degrees (North through East) ! Clean map min=-0.0077991 max=0.15547 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103438Jy sigma=1.150663 ! Fit after self-cal, rms=0.102515Jy sigma=1.149249 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102515Jy sigma=1.149249 ! Fit after self-cal, rms=0.102835Jy sigma=1.146107 ! Inverting map and beam ! Estimated beam: bmin=3.087 mas, bmaj=8.593 mas, bpa=-4.024 degrees ! Estimated noise=1.51235 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00034829 Jy ! Component: 100 - total flux cleaned = -0.000351189 Jy ! Component: 150 - total flux cleaned = -0.000289512 Jy ! Component: 200 - total flux cleaned = -0.000259828 Jy ! Total flux subtracted in 200 components = -0.000259828 Jy ! Clean residual min=-0.007667 max=0.009388 Jy/beam ! Clean residual mean=-0.000036 rms=0.002643 Jy/beam ! Combined flux in latest and established models = 0.183792 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 48 components and 0.183792 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102833Jy sigma=1.145755 ! Fit after self-cal, rms=0.102990Jy sigma=1.145211 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102990Jy sigma=1.145211 ! Fit after self-cal, rms=0.101474Jy sigma=1.133408 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101474Jy sigma=1.133408 ! Fit after self-cal, rms=0.101501Jy sigma=1.133141 ! Inverting map and beam ! Estimated beam: bmin=3.083 mas, bmaj=8.421 mas, bpa=-2.967 degrees ! Estimated noise=1.50283 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000107512 Jy ! Component: 100 - total flux cleaned = -4.38562e-05 Jy ! Component: 150 - total flux cleaned = 5.31589e-06 Jy ! Component: 200 - total flux cleaned = 8.00398e-05 Jy ! Total flux subtracted in 200 components = 8.00398e-05 Jy ! Clean residual min=-0.007607 max=0.008781 Jy/beam ! Clean residual mean=0.000042 rms=0.002500 Jy/beam ! Combined flux in latest and established models = 0.183873 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 58 components and 0.183873 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101464Jy sigma=1.132144 ! Fit after self-cal, rms=0.101492Jy sigma=1.132087 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.627 mas, bmaj=18.51 mas, bpa=7.548 degrees ! Estimated noise=1.90714 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00226851 Jy ! Component: 100 - total flux cleaned = 0.0025142 Jy ! Component: 150 - total flux cleaned = 0.00280295 Jy ! Component: 200 - total flux cleaned = 0.00305425 Jy ! Total flux subtracted in 200 components = 0.00305425 Jy ! Clean residual min=-0.009671 max=0.008756 Jy/beam ! Clean residual mean=0.000072 rms=0.003341 Jy/beam ! Combined flux in latest and established models = 0.186927 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 5 model components to the UV plane model. ! The established model now contains 60 components and 0.186927 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101690Jy sigma=1.133488 ! Fit after self-cal, rms=0.101676Jy sigma=1.132881 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.48 mas, bmaj=6.891 mas, bpa=-0.5131 degrees ! Estimated noise=2.01466 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.135272 Jy ! Component: 100 - total flux cleaned = 0.162954 Jy ! Component: 150 - total flux cleaned = 0.174584 Jy ! Component: 200 - total flux cleaned = 0.18017 Jy ! Total flux subtracted in 200 components = 0.18017 Jy ! Clean residual min=-0.009074 max=0.009406 Jy/beam ! Clean residual mean=0.000039 rms=0.002245 Jy/beam ! Combined flux in latest and established models = 0.18017 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 42 model components to the UV plane model. ! The established model now contains 42 components and 0.18017 Jy ! Inverting map and beam ! Estimated beam: bmin=3.083 mas, bmaj=8.421 mas, bpa=-2.967 degrees ! Estimated noise=1.50283 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00155198 Jy ! Component: 100 - total flux cleaned = 0.00180566 Jy ! Component: 150 - total flux cleaned = 0.00202834 Jy ! Component: 200 - total flux cleaned = 0.00215643 Jy ! Total flux subtracted in 200 components = 0.00215643 Jy ! Clean residual min=-0.007491 max=0.008940 Jy/beam ! Clean residual mean=0.000046 rms=0.002587 Jy/beam ! Combined flux in latest and established models = 0.182326 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 49 components and 0.182326 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.627 mas, bmaj=18.51 mas, bpa=7.548 degrees ! Estimated noise=1.90714 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00286325 Jy ! Component: 100 - total flux cleaned = 0.00320501 Jy ! Component: 150 - total flux cleaned = 0.00361042 Jy ! Component: 200 - total flux cleaned = 0.00396578 Jy ! Total flux subtracted in 200 components = 0.00396578 Jy ! Clean residual min=-0.009424 max=0.008886 Jy/beam ! Clean residual mean=0.000076 rms=0.003412 Jy/beam ! Combined flux in latest and established models = 0.186292 Jy ! Adding 4 model components to the UV plane model. ! The established model now contains 50 components and 0.186292 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.083 mas, bmaj=8.421 mas, bpa=-2.967 degrees ! Estimated noise=1.50283 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00201714 Jy ! Component: 100 - total flux cleaned = -0.00209987 Jy ! Component: 150 - total flux cleaned = -0.00214344 Jy ! Component: 200 - total flux cleaned = -0.00221327 Jy ! Total flux subtracted in 200 components = -0.00221327 Jy ! Clean residual min=-0.007661 max=0.008827 Jy/beam ! Clean residual mean=0.000041 rms=0.002498 Jy/beam ! Combined flux in latest and established models = 0.184079 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 61 components and 0.184079 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101408Jy sigma=1.132189 ! Fit after self-cal, rms=0.101414Jy sigma=1.131994 wmodel J0039-1854_S_2005_07_08_yyk\_map.mod ! Writing 61 model components to file: J0039-1854_S_2005_07_08_yyk_map.mod wobs J0039-1854_S_2005_07_08_yyk\_uvs.fits ! Writing UV FITS file: J0039-1854_S_2005_07_08_yyk_uvs.fits wwins J0039-1854_S_2005_07_08_yyk\_map.win ! wwins: Wrote 1 windows to J0039-1854_S_2005_07_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00265663 Jy ! Component: 100 - total flux cleaned = 0.00437549 Jy ! Component: 150 - total flux cleaned = 0.00556958 Jy ! Component: 200 - total flux cleaned = 0.00634308 Jy ! Component: 250 - total flux cleaned = 0.00686604 Jy ! Component: 300 - total flux cleaned = 0.00725859 Jy ! Component: 350 - total flux cleaned = 0.00763544 Jy ! Component: 400 - total flux cleaned = 0.00781714 Jy ! Component: 450 - total flux cleaned = 0.00798889 Jy ! Component: 500 - total flux cleaned = 0.00798571 Jy ! Component: 550 - total flux cleaned = 0.00814477 Jy ! Component: 600 - total flux cleaned = 0.00806807 Jy ! Component: 650 - total flux cleaned = 0.00821634 Jy ! Component: 700 - total flux cleaned = 0.0082154 Jy ! Component: 750 - total flux cleaned = 0.00828316 Jy ! Component: 800 - total flux cleaned = 0.00828487 Jy ! Component: 850 - total flux cleaned = 0.00822363 Jy ! Component: 900 - total flux cleaned = 0.00840929 Jy ! Component: 950 - total flux cleaned = 0.00864844 Jy ! Component: 1000 - total flux cleaned = 0.00882168 Jy ! Component: 1050 - total flux cleaned = 0.00887939 Jy ! Component: 1100 - total flux cleaned = 0.00893316 Jy ! Component: 1150 - total flux cleaned = 0.00871891 Jy ! Component: 1200 - total flux cleaned = 0.00871934 Jy ! Component: 1250 - total flux cleaned = 0.0085172 Jy ! Component: 1300 - total flux cleaned = 0.0083681 Jy ! Component: 1350 - total flux cleaned = 0.00812583 Jy ! Component: 1400 - total flux cleaned = 0.00788906 Jy ! Component: 1450 - total flux cleaned = 0.00788833 Jy ! Component: 1500 - total flux cleaned = 0.00766065 Jy ! Component: 1550 - total flux cleaned = 0.00757106 Jy ! Component: 1600 - total flux cleaned = 0.00730898 Jy ! Component: 1650 - total flux cleaned = 0.00730983 Jy ! Component: 1700 - total flux cleaned = 0.00714047 Jy ! Component: 1750 - total flux cleaned = 0.00693271 Jy ! Component: 1800 - total flux cleaned = 0.00672871 Jy ! Component: 1850 - total flux cleaned = 0.00644808 Jy ! Component: 1900 - total flux cleaned = 0.00632949 Jy ! Component: 1950 - total flux cleaned = 0.00621242 Jy ! Component: 2000 - total flux cleaned = 0.00605876 Jy ! Total flux subtracted in 2048 components = 0.00590695 Jy ! Clean residual min=-0.002542 max=0.002315 Jy/beam ! Clean residual mean=-0.000029 rms=0.000777 Jy/beam ! Combined flux in latest and established models = 0.189986 Jy keep ! Adding 157 model components to the UV plane model. ! The established model now contains 218 components and 0.189986 Jy ![Exited script file: muppet] wmap "J0039-1854_S_2005_07_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.083 x 8.421 at -2.967 degrees (North through East) ! Clean map min=-0.0055802 max=0.15258 Jy/beam ! Writing clean map to FITS file: J0039-1854_S_2005_07_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.152579 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00072385 device "J0039-1854_S_2005_07_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J0039-1854_S_2005_07_08_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.42323 1.42323 2.84645 5.69291 11.3858 22.7716 45.5433 91.0865 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.152 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.083 x 8.421 at -2.967 degrees (North through East) ! Clean map min=-0.0055802 max=0.15258 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0039-1854_S_2005_07_08_yyk\_map.gif/gif" ! Attempting to open device: 'J0039-1854_S_2005_07_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0039-1854_S_2005_07_08_yyk_uvs.log closed on Fri Jan 20 09:41:44 2006