! Started logfile: J0017-2748_S_2005_07_20_yyk_uvs.log on Fri Jan 20 09:40:32 2006 obs J0017-2748_S_2005_07_20_yyk_uve.fits ! Reading UV FITS file: J0017-2748_S_2005_07_20_yyk_uve.fits ! AN table 1: 12 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.761111 visibilities/baseline/integration-bin. ! Found source: J0017-2748 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1527 lines of history. ! ! Reading 1644 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0017-2748_S_2005_07_20_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.180739 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.872 mas, bmaj=7.05 mas, bpa=-4.233 degrees ! Estimated noise=2.63427 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, -0.5). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0850421 Jy ! Component: 100 - total flux cleaned = 0.124564 Jy ! Total flux subtracted in 100 components = 0.124564 Jy ! Clean residual min=-0.013773 max=0.022296 Jy/beam ! Clean residual mean=-0.000016 rms=0.004457 Jy/beam ! Combined flux in latest and established models = 0.124564 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 42 model components to the UV plane model. ! The established model now contains 42 components and 0.124564 Jy ! ! Correcting IF 1. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 41 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.133559Jy sigma=1.591736 ! Fit after self-cal, rms=0.123820Jy sigma=1.448951 ! Inverting map and beam ! Estimated beam: bmin=2.872 mas, bmaj=7.04 mas, bpa=-4.18 degrees ! Estimated noise=2.64057 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.249 mas, bmaj=12.07 mas, bpa=-10.73 degrees ! Estimated noise=1.38108 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.048669 Jy ! Component: 100 - total flux cleaned = 0.0652503 Jy ! Component: 150 - total flux cleaned = 0.0717145 Jy ! Component: 200 - total flux cleaned = 0.072803 Jy ! Total flux subtracted in 200 components = 0.072803 Jy ! Clean residual min=-0.009918 max=0.014717 Jy/beam ! Clean residual mean=0.000193 rms=0.003760 Jy/beam ! Combined flux in latest and established models = 0.197367 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 64 components and 0.197367 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115050Jy sigma=1.225367 ! Fit after self-cal, rms=0.114916Jy sigma=1.224720 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.249 x 12.07 at -10.73 degrees (North through East) ! Clean map min=-0.0095272 max=0.11797 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.114916Jy sigma=1.224720 ! Fit after self-cal, rms=0.114916Jy sigma=1.224720 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114916Jy sigma=1.224720 ! Fit after self-cal, rms=0.114904Jy sigma=1.224599 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.249 mas, bmaj=12.07 mas, bpa=-10.73 degrees ! Estimated noise=1.38108 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000865747 Jy ! Component: 100 - total flux cleaned = 0.00142723 Jy ! Component: 150 - total flux cleaned = 0.00172363 Jy ! Component: 200 - total flux cleaned = 0.00199007 Jy ! Total flux subtracted in 200 components = 0.00199007 Jy ! Clean residual min=-0.009575 max=0.014491 Jy/beam ! Clean residual mean=0.000179 rms=0.003677 Jy/beam ! Combined flux in latest and established models = 0.199357 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 69 components and 0.199357 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114747Jy sigma=1.222179 ! Fit after self-cal, rms=0.114700Jy sigma=1.221902 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114700Jy sigma=1.221902 ! Fit after self-cal, rms=0.107266Jy sigma=1.135682 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00395522 Jy ! Component: 100 - total flux cleaned = 0.00427127 Jy ! Component: 150 - total flux cleaned = 0.00446152 Jy ! Component: 200 - total flux cleaned = 0.00471891 Jy ! Total flux subtracted in 200 components = 0.00471891 Jy ! Clean residual min=-0.009075 max=0.014209 Jy/beam ! Clean residual mean=0.000134 rms=0.003620 Jy/beam ! Combined flux in latest and established models = 0.204076 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 74 components and 0.204076 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107035Jy sigma=1.132195 ! Fit after self-cal, rms=0.105660Jy sigma=1.123932 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.249 x 12.07 at -10.73 degrees (North through East) ! Clean map min=-0.0088721 max=0.11968 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105660Jy sigma=1.123932 ! Fit after self-cal, rms=0.105660Jy sigma=1.123932 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105660Jy sigma=1.123932 ! Fit after self-cal, rms=0.105385Jy sigma=1.122720 ! Inverting map and beam ! Estimated beam: bmin=4.249 mas, bmaj=12.07 mas, bpa=-10.73 degrees ! Estimated noise=1.38108 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000681915 Jy ! Component: 100 - total flux cleaned = 0.000764494 Jy ! Component: 150 - total flux cleaned = 0.00083995 Jy ! Component: 200 - total flux cleaned = 0.00090572 Jy ! Total flux subtracted in 200 components = 0.00090572 Jy ! Clean residual min=-0.009287 max=0.013933 Jy/beam ! Clean residual mean=0.000127 rms=0.003573 Jy/beam ! Combined flux in latest and established models = 0.204981 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 75 components and 0.204981 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105240Jy sigma=1.121117 ! Fit after self-cal, rms=0.105118Jy sigma=1.120667 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105118Jy sigma=1.120667 ! Fit after self-cal, rms=0.105118Jy sigma=1.120667 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105118Jy sigma=1.120667 ! Fit after self-cal, rms=0.105090Jy sigma=1.120614 ! Inverting map and beam ! Estimated beam: bmin=4.249 mas, bmaj=12.07 mas, bpa=-10.73 degrees ! Estimated noise=1.38108 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000244707 Jy ! Component: 100 - total flux cleaned = 0.000240057 Jy ! Component: 150 - total flux cleaned = 0.000245279 Jy ! Component: 200 - total flux cleaned = 0.000311186 Jy ! Total flux subtracted in 200 components = 0.000311186 Jy ! Clean residual min=-0.009302 max=0.013754 Jy/beam ! Clean residual mean=0.000126 rms=0.003550 Jy/beam ! Combined flux in latest and established models = 0.205292 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 76 components and 0.205292 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104983Jy sigma=1.119408 ! Fit after self-cal, rms=0.104930Jy sigma=1.119221 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.402 mas, bmaj=25.4 mas, bpa=9.189 degrees ! Estimated noise=1.56834 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00277222 Jy ! Component: 100 - total flux cleaned = 0.00293164 Jy ! Component: 150 - total flux cleaned = 0.0030879 Jy ! Component: 200 - total flux cleaned = 0.00324285 Jy ! Total flux subtracted in 200 components = 0.00324285 Jy ! Clean residual min=-0.010250 max=0.015339 Jy/beam ! Clean residual mean=0.000166 rms=0.004397 Jy/beam ! Combined flux in latest and established models = 0.208535 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 4 model components to the UV plane model. ! The established model now contains 77 components and 0.208535 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104916Jy sigma=1.119614 ! Fit after self-cal, rms=0.104881Jy sigma=1.119240 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.872 mas, bmaj=7.04 mas, bpa=-4.18 degrees ! Estimated noise=2.64057 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0975212 Jy ! Component: 100 - total flux cleaned = 0.139593 Jy ! Component: 150 - total flux cleaned = 0.162909 Jy ! Component: 200 - total flux cleaned = 0.177355 Jy ! Total flux subtracted in 200 components = 0.177355 Jy ! Clean residual min=-0.012922 max=0.016147 Jy/beam ! Clean residual mean=0.000019 rms=0.003518 Jy/beam ! Combined flux in latest and established models = 0.177355 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.177355 Jy ! Inverting map and beam ! Estimated beam: bmin=4.249 mas, bmaj=12.07 mas, bpa=-10.73 degrees ! Estimated noise=1.38108 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0175193 Jy ! Component: 100 - total flux cleaned = 0.0239983 Jy ! Component: 150 - total flux cleaned = 0.0250784 Jy ! Component: 200 - total flux cleaned = 0.0254074 Jy ! Total flux subtracted in 200 components = 0.0254074 Jy ! Clean residual min=-0.009457 max=0.014317 Jy/beam ! Clean residual mean=0.000148 rms=0.003631 Jy/beam ! Combined flux in latest and established models = 0.202762 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 46 components and 0.202763 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.402 mas, bmaj=25.4 mas, bpa=9.189 degrees ! Estimated noise=1.56834 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00418158 Jy ! Component: 100 - total flux cleaned = 0.00427219 Jy ! Component: 150 - total flux cleaned = 0.00445904 Jy ! Component: 200 - total flux cleaned = 0.00464137 Jy ! Total flux subtracted in 200 components = 0.00464137 Jy ! Clean residual min=-0.010289 max=0.015606 Jy/beam ! Clean residual mean=0.000181 rms=0.004453 Jy/beam ! Combined flux in latest and established models = 0.207404 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 49 components and 0.207404 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.249 mas, bmaj=12.07 mas, bpa=-10.73 degrees ! Estimated noise=1.38108 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00244103 Jy ! Component: 100 - total flux cleaned = -0.00244846 Jy ! Component: 150 - total flux cleaned = -0.00236454 Jy ! Component: 200 - total flux cleaned = -0.00228515 Jy ! Total flux subtracted in 200 components = -0.00228515 Jy ! Clean residual min=-0.009324 max=0.013827 Jy/beam ! Clean residual mean=0.000130 rms=0.003559 Jy/beam ! Combined flux in latest and established models = 0.205119 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 54 components and 0.205119 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105163Jy sigma=1.120966 ! Fit after self-cal, rms=0.105164Jy sigma=1.120539 wmodel J0017-2748_S_2005_07_20_yyk\_map.mod ! Writing 54 model components to file: J0017-2748_S_2005_07_20_yyk_map.mod wobs J0017-2748_S_2005_07_20_yyk\_uvs.fits ! Writing UV FITS file: J0017-2748_S_2005_07_20_yyk_uvs.fits wwins J0017-2748_S_2005_07_20_yyk\_map.win ! wwins: Wrote 1 windows to J0017-2748_S_2005_07_20_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00580154 Jy ! Component: 100 - total flux cleaned = 0.00983652 Jy ! Component: 150 - total flux cleaned = 0.0120696 Jy ! Component: 200 - total flux cleaned = 0.0124959 Jy ! Component: 250 - total flux cleaned = 0.0130258 Jy ! Component: 300 - total flux cleaned = 0.0136566 Jy ! Component: 350 - total flux cleaned = 0.0146097 Jy ! Component: 400 - total flux cleaned = 0.0150626 Jy ! Component: 450 - total flux cleaned = 0.0156011 Jy ! Component: 500 - total flux cleaned = 0.0160146 Jy ! Component: 550 - total flux cleaned = 0.016314 Jy ! Component: 600 - total flux cleaned = 0.0169827 Jy ! Component: 650 - total flux cleaned = 0.017626 Jy ! Component: 700 - total flux cleaned = 0.0181594 Jy ! Component: 750 - total flux cleaned = 0.0185052 Jy ! Component: 800 - total flux cleaned = 0.0188403 Jy ! Component: 850 - total flux cleaned = 0.0189213 Jy ! Component: 900 - total flux cleaned = 0.0190776 Jy ! Component: 950 - total flux cleaned = 0.0187703 Jy ! Component: 1000 - total flux cleaned = 0.0186976 Jy ! Component: 1050 - total flux cleaned = 0.0189185 Jy ! Component: 1100 - total flux cleaned = 0.0189166 Jy ! Component: 1150 - total flux cleaned = 0.0187747 Jy ! Component: 1200 - total flux cleaned = 0.0187057 Jy ! Component: 1250 - total flux cleaned = 0.0187718 Jy ! Component: 1300 - total flux cleaned = 0.0186413 Jy ! Component: 1350 - total flux cleaned = 0.0186413 Jy ! Component: 1400 - total flux cleaned = 0.018517 Jy ! Component: 1450 - total flux cleaned = 0.0186394 Jy ! Component: 1500 - total flux cleaned = 0.0185206 Jy ! Component: 1550 - total flux cleaned = 0.0185804 Jy ! Component: 1600 - total flux cleaned = 0.0187526 Jy ! Component: 1650 - total flux cleaned = 0.018752 Jy ! Component: 1700 - total flux cleaned = 0.0189179 Jy ! Component: 1750 - total flux cleaned = 0.0191353 Jy ! Component: 1800 - total flux cleaned = 0.0192955 Jy ! Component: 1850 - total flux cleaned = 0.0195054 Jy ! Component: 1900 - total flux cleaned = 0.0197118 Jy ! Component: 1950 - total flux cleaned = 0.0197623 Jy ! Component: 2000 - total flux cleaned = 0.020215 Jy ! Total flux subtracted in 2048 components = 0.0204129 Jy ! Clean residual min=-0.002499 max=0.002939 Jy/beam ! Clean residual mean=0.000031 rms=0.001115 Jy/beam ! Combined flux in latest and established models = 0.225532 Jy keep ! Adding 157 model components to the UV plane model. ! The established model now contains 211 components and 0.225532 Jy ![Exited script file: muppet] wmap "J0017-2748_S_2005_07_20_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.249 x 12.07 at -10.73 degrees (North through East) ! Clean map min=-0.0065264 max=0.12194 Jy/beam ! Writing clean map to FITS file: J0017-2748_S_2005_07_20_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.121942 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0011125 device "J0017-2748_S_2005_07_20_yyk\_map.eps/VPS" ! Attempting to open device: 'J0017-2748_S_2005_07_20_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.73695 2.73695 5.4739 10.9478 21.8956 43.7912 87.5825 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0033 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.121 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.249 x 12.07 at -10.73 degrees (North through East) ! Clean map min=-0.0065264 max=0.12194 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0017-2748_S_2005_07_20_yyk\_map.gif/gif" ! Attempting to open device: 'J0017-2748_S_2005_07_20_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0017-2748_S_2005_07_20_yyk_uvs.log closed on Fri Jan 20 09:40:37 2006