! Started logfile: J0017-0512_S_2005_07_09_yyk_uvs.log on Fri Jan 20 09:40:23 2006 obs J0017-0512_S_2005_07_09_yyk_uve.fits ! Reading UV FITS file: J0017-0512_S_2005_07_09_yyk_uve.fits ! AN table 1: 11 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.929293 visibilities/baseline/integration-bin. ! Found source: J0017-0512 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1602 lines of history. ! ! Reading 1840 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0017-0512_S_2005_07_09_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.145766 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.559 mas, bmaj=6.835 mas, bpa=-3.875 degrees ! Estimated noise=1.30139 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0992449 Jy ! Component: 100 - total flux cleaned = 0.121124 Jy ! Total flux subtracted in 100 components = 0.121124 Jy ! Clean residual min=-0.007318 max=0.009135 Jy/beam ! Clean residual mean=0.000017 rms=0.001887 Jy/beam ! Combined flux in latest and established models = 0.121124 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.121124 Jy ! ! Correcting IF 1. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.079936Jy sigma=1.193686 ! Fit after self-cal, rms=0.077377Jy sigma=1.152782 ! Inverting map and beam ! Estimated beam: bmin=2.559 mas, bmaj=6.835 mas, bpa=-3.875 degrees ! Estimated noise=1.30139 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.31 mas, bmaj=8.9 mas, bpa=-8.329 degrees ! Estimated noise=0.90044 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0103391 Jy ! Component: 100 - total flux cleaned = 0.0133638 Jy ! Component: 150 - total flux cleaned = 0.0146758 Jy ! Component: 200 - total flux cleaned = 0.0152363 Jy ! Total flux subtracted in 200 components = 0.0152363 Jy ! Clean residual min=-0.004077 max=0.004662 Jy/beam ! Clean residual mean=-0.000003 rms=0.001226 Jy/beam ! Combined flux in latest and established models = 0.136361 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 39 components and 0.136361 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076250Jy sigma=1.132716 ! Fit after self-cal, rms=0.076238Jy sigma=1.132641 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.31 x 8.9 at -8.329 degrees (North through East) ! Clean map min=-0.0039469 max=0.11999 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.076238Jy sigma=1.132641 ! Fit after self-cal, rms=0.076238Jy sigma=1.132641 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076238Jy sigma=1.132641 ! Fit after self-cal, rms=0.076239Jy sigma=1.132641 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.31 mas, bmaj=8.9 mas, bpa=-8.329 degrees ! Estimated noise=0.90044 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000231223 Jy ! Component: 100 - total flux cleaned = 0.000298908 Jy ! Component: 150 - total flux cleaned = 0.000337461 Jy ! Component: 200 - total flux cleaned = 0.000354008 Jy ! Total flux subtracted in 200 components = 0.000354008 Jy ! Clean residual min=-0.004042 max=0.004710 Jy/beam ! Clean residual mean=-0.000006 rms=0.001223 Jy/beam ! Combined flux in latest and established models = 0.136715 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 42 components and 0.136715 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076234Jy sigma=1.132455 ! Fit after self-cal, rms=0.076229Jy sigma=1.132421 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076229Jy sigma=1.132421 ! Fit after self-cal, rms=0.073414Jy sigma=1.087447 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000888679 Jy ! Component: 100 - total flux cleaned = 0.000895188 Jy ! Component: 150 - total flux cleaned = 0.000871075 Jy ! Component: 200 - total flux cleaned = 0.000847464 Jy ! Total flux subtracted in 200 components = 0.000847464 Jy ! Clean residual min=-0.004161 max=0.004511 Jy/beam ! Clean residual mean=-0.000010 rms=0.001204 Jy/beam ! Combined flux in latest and established models = 0.137562 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 48 components and 0.137562 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073354Jy sigma=1.086973 ! Fit after self-cal, rms=0.073155Jy sigma=1.083585 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.31 x 8.9 at -8.329 degrees (North through East) ! Clean map min=-0.0039462 max=0.12114 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073155Jy sigma=1.083585 ! Fit after self-cal, rms=0.073185Jy sigma=1.082206 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073185Jy sigma=1.082206 ! Fit after self-cal, rms=0.073189Jy sigma=1.081784 ! Inverting map and beam ! Estimated beam: bmin=3.311 mas, bmaj=8.829 mas, bpa=-7.975 degrees ! Estimated noise=0.900449 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000253221 Jy ! Component: 100 - total flux cleaned = 0.000272971 Jy ! Component: 150 - total flux cleaned = 0.000290175 Jy ! Component: 200 - total flux cleaned = 0.000290438 Jy ! Total flux subtracted in 200 components = 0.000290438 Jy ! Clean residual min=-0.004056 max=0.004308 Jy/beam ! Clean residual mean=-0.000012 rms=0.001196 Jy/beam ! Combined flux in latest and established models = 0.137852 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 50 components and 0.137852 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073181Jy sigma=1.081584 ! Fit after self-cal, rms=0.073195Jy sigma=1.081481 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073195Jy sigma=1.081481 ! Fit after self-cal, rms=0.073161Jy sigma=1.081177 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073161Jy sigma=1.081177 ! Fit after self-cal, rms=0.073175Jy sigma=1.081150 ! Inverting map and beam ! Estimated beam: bmin=3.313 mas, bmaj=8.838 mas, bpa=-7.937 degrees ! Estimated noise=0.90067 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -7.42062e-05 Jy ! Component: 100 - total flux cleaned = -9.10808e-05 Jy ! Component: 150 - total flux cleaned = -0.000106999 Jy ! Component: 200 - total flux cleaned = -0.00012128 Jy ! Total flux subtracted in 200 components = -0.00012128 Jy ! Clean residual min=-0.004070 max=0.004358 Jy/beam ! Clean residual mean=-0.000014 rms=0.001192 Jy/beam ! Combined flux in latest and established models = 0.137731 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 57 components and 0.137731 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073174Jy sigma=1.081028 ! Fit after self-cal, rms=0.073183Jy sigma=1.081006 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.224 mas, bmaj=14.24 mas, bpa=2.883 degrees ! Estimated noise=1.11908 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00130682 Jy ! Component: 100 - total flux cleaned = 0.00152336 Jy ! Component: 150 - total flux cleaned = 0.00165986 Jy ! Component: 200 - total flux cleaned = 0.00181522 Jy ! Total flux subtracted in 200 components = 0.00181522 Jy ! Clean residual min=-0.005170 max=0.003606 Jy/beam ! Clean residual mean=-0.000042 rms=0.001413 Jy/beam ! Combined flux in latest and established models = 0.139546 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 61 components and 0.139546 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073218Jy sigma=1.081745 ! Fit after self-cal, rms=0.073204Jy sigma=1.081610 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.559 mas, bmaj=6.816 mas, bpa=-3.615 degrees ! Estimated noise=1.30204 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.10299 Jy ! Component: 100 - total flux cleaned = 0.123447 Jy ! Component: 150 - total flux cleaned = 0.13249 Jy ! Component: 200 - total flux cleaned = 0.136545 Jy ! Total flux subtracted in 200 components = 0.136545 Jy ! Clean residual min=-0.005736 max=0.006149 Jy/beam ! Clean residual mean=-0.000010 rms=0.001588 Jy/beam ! Combined flux in latest and established models = 0.136545 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.136545 Jy ! Inverting map and beam ! Estimated beam: bmin=3.313 mas, bmaj=8.838 mas, bpa=-7.937 degrees ! Estimated noise=0.90067 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000625653 Jy ! Component: 100 - total flux cleaned = 0.000810723 Jy ! Component: 150 - total flux cleaned = 0.000917159 Jy ! Component: 200 - total flux cleaned = 0.00100338 Jy ! Total flux subtracted in 200 components = 0.00100338 Jy ! Clean residual min=-0.004055 max=0.004412 Jy/beam ! Clean residual mean=-0.000013 rms=0.001200 Jy/beam ! Combined flux in latest and established models = 0.137548 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 34 components and 0.137548 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.224 mas, bmaj=14.24 mas, bpa=2.883 degrees ! Estimated noise=1.11908 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137134 Jy ! Component: 100 - total flux cleaned = 0.00158201 Jy ! Component: 150 - total flux cleaned = 0.00171516 Jy ! Component: 200 - total flux cleaned = 0.00187107 Jy ! Total flux subtracted in 200 components = 0.00187107 Jy ! Clean residual min=-0.005152 max=0.003626 Jy/beam ! Clean residual mean=-0.000040 rms=0.001414 Jy/beam ! Combined flux in latest and established models = 0.139419 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 41 components and 0.139419 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.313 mas, bmaj=8.838 mas, bpa=-7.937 degrees ! Estimated noise=0.90067 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00127872 Jy ! Component: 100 - total flux cleaned = -0.00132485 Jy ! Component: 150 - total flux cleaned = -0.0013257 Jy ! Component: 200 - total flux cleaned = -0.00135786 Jy ! Total flux subtracted in 200 components = -0.00135786 Jy ! Clean residual min=-0.004014 max=0.004484 Jy/beam ! Clean residual mean=-0.000016 rms=0.001197 Jy/beam ! Combined flux in latest and established models = 0.138062 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 57 components and 0.138062 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073139Jy sigma=1.081461 ! Fit after self-cal, rms=0.073156Jy sigma=1.081426 wmodel J0017-0512_S_2005_07_09_yyk\_map.mod ! Writing 57 model components to file: J0017-0512_S_2005_07_09_yyk_map.mod wobs J0017-0512_S_2005_07_09_yyk\_uvs.fits ! Writing UV FITS file: J0017-0512_S_2005_07_09_yyk_uvs.fits wwins J0017-0512_S_2005_07_09_yyk\_map.win ! wwins: Wrote 1 windows to J0017-0512_S_2005_07_09_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000898289 Jy ! Component: 100 - total flux cleaned = 0.000899906 Jy ! Component: 150 - total flux cleaned = 0.000834257 Jy ! Component: 200 - total flux cleaned = 0.000896749 Jy ! Component: 250 - total flux cleaned = 0.000834158 Jy ! Component: 300 - total flux cleaned = 0.000714818 Jy ! Component: 350 - total flux cleaned = 0.000714791 Jy ! Component: 400 - total flux cleaned = 0.000657495 Jy ! Component: 450 - total flux cleaned = 0.000711987 Jy ! Component: 500 - total flux cleaned = 0.00103164 Jy ! Component: 550 - total flux cleaned = 0.00103016 Jy ! Component: 600 - total flux cleaned = 0.00123412 Jy ! Component: 650 - total flux cleaned = 0.0013835 Jy ! Component: 700 - total flux cleaned = 0.00148147 Jy ! Component: 750 - total flux cleaned = 0.00157674 Jy ! Component: 800 - total flux cleaned = 0.00152995 Jy ! Component: 850 - total flux cleaned = 0.00152992 Jy ! Component: 900 - total flux cleaned = 0.00135052 Jy ! Component: 950 - total flux cleaned = 0.00143961 Jy ! Component: 1000 - total flux cleaned = 0.00152573 Jy ! Component: 1050 - total flux cleaned = 0.00152499 Jy ! Component: 1100 - total flux cleaned = 0.00165074 Jy ! Component: 1150 - total flux cleaned = 0.00181615 Jy ! Component: 1200 - total flux cleaned = 0.0019389 Jy ! Component: 1250 - total flux cleaned = 0.00201951 Jy ! Component: 1300 - total flux cleaned = 0.00221769 Jy ! Component: 1350 - total flux cleaned = 0.00241287 Jy ! Component: 1400 - total flux cleaned = 0.00252805 Jy ! Component: 1450 - total flux cleaned = 0.00271746 Jy ! Component: 1500 - total flux cleaned = 0.00279211 Jy ! Component: 1550 - total flux cleaned = 0.00282884 Jy ! Component: 1600 - total flux cleaned = 0.00293863 Jy ! Component: 1650 - total flux cleaned = 0.00308251 Jy ! Component: 1700 - total flux cleaned = 0.0030466 Jy ! Component: 1750 - total flux cleaned = 0.00311706 Jy ! Component: 1800 - total flux cleaned = 0.00329031 Jy ! Component: 1850 - total flux cleaned = 0.00311916 Jy ! Component: 1900 - total flux cleaned = 0.00335703 Jy ! Component: 1950 - total flux cleaned = 0.00332367 Jy ! Component: 2000 - total flux cleaned = 0.0033235 Jy ! Total flux subtracted in 2048 components = 0.00342173 Jy ! Clean residual min=-0.001936 max=0.001930 Jy/beam ! Clean residual mean=-0.000005 rms=0.000686 Jy/beam ! Combined flux in latest and established models = 0.141483 Jy keep ! Adding 142 model components to the UV plane model. ! The established model now contains 199 components and 0.141483 Jy ![Exited script file: muppet] wmap "J0017-0512_S_2005_07_09_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.313 x 8.838 at -7.937 degrees (North through East) ! Clean map min=-0.0033046 max=0.1211 Jy/beam ! Writing clean map to FITS file: J0017-0512_S_2005_07_09_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.121099 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00068694 device "J0017-0512_S_2005_07_09_yyk\_map.eps/VPS" ! Attempting to open device: 'J0017-0512_S_2005_07_09_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.70176 1.70176 3.40352 6.80704 13.6141 27.2282 54.4563 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.121 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.313 x 8.838 at -7.937 degrees (North through East) ! Clean map min=-0.0033046 max=0.1211 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0017-0512_S_2005_07_09_yyk\_map.gif/gif" ! Attempting to open device: 'J0017-0512_S_2005_07_09_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0017-0512_S_2005_07_09_yyk_uvs.log closed on Fri Jan 20 09:40:27 2006