! Started logfile: J2359-3133_S_2005_06_01_yyk_uvs.log on Sat Oct 8 17:47:42 2005 obs J2359-3133_S_2005_06_01_yyk_uve.fits ! Reading UV FITS file: J2359-3133_S_2005_06_01_yyk_uve.fits ! AN table 1: 4 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.866667 visibilities/baseline/integration-bin. ! Found source: J2359-3133 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1802 lines of history. ! ! Reading 624 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2359-3133_S_2005_06_01_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.579157 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.404 mas, bmaj=7.257 mas, bpa=-10.5 degrees ! Estimated noise=2.44365 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.478883 Jy ! Component: 100 - total flux cleaned = 0.545605 Jy ! Total flux subtracted in 100 components = 0.545605 Jy ! Clean residual min=-0.019438 max=0.023824 Jy/beam ! Clean residual mean=-0.000074 rms=0.005497 Jy/beam ! Combined flux in latest and established models = 0.545605 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.545605 Jy ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.124462Jy sigma=1.635316 ! Fit after self-cal, rms=0.124291Jy sigma=1.631819 ! Inverting map and beam ! Estimated beam: bmin=2.404 mas, bmaj=7.257 mas, bpa=-10.5 degrees ! Estimated noise=2.44365 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.96 mas, bmaj=8.392 mas, bpa=-9.608 degrees ! Estimated noise=1.91528 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0169614 Jy ! Component: 100 - total flux cleaned = 0.0193361 Jy ! Component: 150 - total flux cleaned = 0.0203796 Jy ! Component: 200 - total flux cleaned = 0.0208212 Jy ! Total flux subtracted in 200 components = 0.0208212 Jy ! Clean residual min=-0.015153 max=0.018224 Jy/beam ! Clean residual mean=0.000069 rms=0.004673 Jy/beam ! Combined flux in latest and established models = 0.566426 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 23 components and 0.566426 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120359Jy sigma=1.599844 ! Fit after self-cal, rms=0.120357Jy sigma=1.599790 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.96 x 8.392 at -9.608 degrees (North through East) ! Clean map min=-0.014449 max=0.54792 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00777 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.96 HN 1.18 KP 0.92 ! LA 1.19 MK 0.89 NL 0.90 OV 0.96 ! PT 1.04 SC 0.92 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.979082 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.10 HN 1.17 KP 0.96 ! LA 1.10 MK 0.97 NL 0.98 OV 0.98 ! PT 0.99 SC 0.97 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.963557 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.23 HN 1.19 KP 0.94 ! LA 0.90 MK 1.10 NL 0.95 OV 0.99 ! PT 1.09 SC 0.98 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.06327 ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.05 HN 1.02 KP 0.87 ! LA 0.73 MK 1.03 NL 0.94 OV 0.81 ! PT 0.94 SC 1.10 ! ! ! Fit before self-cal, rms=0.120357Jy sigma=1.599790 ! Fit after self-cal, rms=0.088338Jy sigma=1.186366 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088338Jy sigma=1.186366 ! Fit after self-cal, rms=0.088348Jy sigma=1.186279 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.006 mas, bmaj=8.298 mas, bpa=-9.115 degrees ! Estimated noise=1.90189 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00181374 Jy ! Component: 100 - total flux cleaned = 0.00200502 Jy ! Component: 150 - total flux cleaned = 0.00212878 Jy ! Component: 200 - total flux cleaned = 0.00227839 Jy ! Total flux subtracted in 200 components = 0.00227838 Jy ! Clean residual min=-0.006830 max=0.007234 Jy/beam ! Clean residual mean=-0.000004 rms=0.001927 Jy/beam ! Combined flux in latest and established models = 0.568705 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 31 components and 0.568705 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088235Jy sigma=1.185469 ! Fit after self-cal, rms=0.088235Jy sigma=1.185455 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088235Jy sigma=1.185455 ! Fit after self-cal, rms=0.086256Jy sigma=1.158626 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00044757 Jy ! Component: 100 - total flux cleaned = 0.000506693 Jy ! Component: 150 - total flux cleaned = 0.000508075 Jy ! Component: 200 - total flux cleaned = 0.000508843 Jy ! Total flux subtracted in 200 components = 0.000508843 Jy ! Clean residual min=-0.006819 max=0.007254 Jy/beam ! Clean residual mean=-0.000003 rms=0.001913 Jy/beam ! Combined flux in latest and established models = 0.569214 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 37 components and 0.569214 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086225Jy sigma=1.158395 ! Fit after self-cal, rms=0.086118Jy sigma=1.156620 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.006 x 8.298 at -9.115 degrees (North through East) ! Clean map min=-0.0064628 max=0.54815 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086118Jy sigma=1.156620 ! Fit after self-cal, rms=0.073398Jy sigma=0.980232 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073398Jy sigma=0.980232 ! Fit after self-cal, rms=0.073424Jy sigma=0.980002 ! Inverting map and beam ! Estimated beam: bmin=3.002 mas, bmaj=8.287 mas, bpa=-9.137 degrees ! Estimated noise=1.89665 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000250775 Jy ! Component: 100 - total flux cleaned = 0.000222594 Jy ! Component: 150 - total flux cleaned = 0.000248763 Jy ! Component: 200 - total flux cleaned = 0.000247666 Jy ! Total flux subtracted in 200 components = 0.000247666 Jy ! Clean residual min=-0.006922 max=0.006477 Jy/beam ! Clean residual mean=-0.000019 rms=0.001724 Jy/beam ! Combined flux in latest and established models = 0.569461 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 45 components and 0.569461 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073402Jy sigma=0.979756 ! Fit after self-cal, rms=0.073428Jy sigma=0.979708 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073428Jy sigma=0.979708 ! Fit after self-cal, rms=0.071404Jy sigma=0.954030 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071404Jy sigma=0.954030 ! Fit after self-cal, rms=0.071423Jy sigma=0.954021 ! Inverting map and beam ! Estimated beam: bmin=2.997 mas, bmaj=8.277 mas, bpa=-9.164 degrees ! Estimated noise=1.89646 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000662429 Jy ! Component: 100 - total flux cleaned = 0.000711605 Jy ! Component: 150 - total flux cleaned = 0.000711692 Jy ! Component: 200 - total flux cleaned = 0.000713114 Jy ! Total flux subtracted in 200 components = 0.000713114 Jy ! Clean residual min=-0.006879 max=0.006667 Jy/beam ! Clean residual mean=-0.000021 rms=0.001723 Jy/beam ! Combined flux in latest and established models = 0.570174 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 50 components and 0.570174 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071403Jy sigma=0.953801 ! Fit after self-cal, rms=0.071409Jy sigma=0.953793 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.334 mas, bmaj=22.92 mas, bpa=-4.235 degrees ! Estimated noise=2.48167 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000388466 Jy ! Component: 100 - total flux cleaned = 0.000413843 Jy ! Component: 150 - total flux cleaned = 0.000436545 Jy ! Component: 200 - total flux cleaned = 0.000458395 Jy ! Total flux subtracted in 200 components = 0.000458395 Jy ! Clean residual min=-0.007334 max=0.006889 Jy/beam ! Clean residual mean=-0.000042 rms=0.002392 Jy/beam ! Combined flux in latest and established models = 0.570633 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 56 components and 0.570633 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071441Jy sigma=0.953921 ! Fit after self-cal, rms=0.071441Jy sigma=0.953847 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.428 mas, bmaj=7.196 mas, bpa=-10.09 degrees ! Estimated noise=2.42025 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.474542 Jy ! Component: 100 - total flux cleaned = 0.538534 Jy ! Component: 150 - total flux cleaned = 0.555711 Jy ! Component: 200 - total flux cleaned = 0.562966 Jy ! Total flux subtracted in 200 components = 0.562966 Jy ! Clean residual min=-0.008102 max=0.007534 Jy/beam ! Clean residual mean=-0.000032 rms=0.002102 Jy/beam ! Combined flux in latest and established models = 0.562967 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.562967 Jy ! Inverting map and beam ! Estimated beam: bmin=2.997 mas, bmaj=8.277 mas, bpa=-9.164 degrees ! Estimated noise=1.89646 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00451826 Jy ! Component: 100 - total flux cleaned = 0.00495602 Jy ! Component: 150 - total flux cleaned = 0.005368 Jy ! Component: 200 - total flux cleaned = 0.00556887 Jy ! Total flux subtracted in 200 components = 0.00556887 Jy ! Clean residual min=-0.007207 max=0.006572 Jy/beam ! Clean residual mean=-0.000027 rms=0.001756 Jy/beam ! Combined flux in latest and established models = 0.568535 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 35 components and 0.568535 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.334 mas, bmaj=22.92 mas, bpa=-4.235 degrees ! Estimated noise=2.48167 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00127374 Jy ! Component: 100 - total flux cleaned = 0.00132524 Jy ! Component: 150 - total flux cleaned = 0.00137208 Jy ! Component: 200 - total flux cleaned = 0.00144991 Jy ! Total flux subtracted in 200 components = 0.00144991 Jy ! Clean residual min=-0.007350 max=0.006952 Jy/beam ! Clean residual mean=-0.000044 rms=0.002430 Jy/beam ! Combined flux in latest and established models = 0.569985 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 40 components and 0.569985 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.997 mas, bmaj=8.277 mas, bpa=-9.164 degrees ! Estimated noise=1.89646 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00062325 Jy ! Component: 100 - total flux cleaned = -0.000765636 Jy ! Component: 150 - total flux cleaned = -0.000807328 Jy ! Component: 200 - total flux cleaned = -0.000807548 Jy ! Total flux subtracted in 200 components = -0.000807548 Jy ! Clean residual min=-0.007017 max=0.006648 Jy/beam ! Clean residual mean=-0.000024 rms=0.001737 Jy/beam ! Combined flux in latest and established models = 0.569178 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 53 components and 0.569178 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071474Jy sigma=0.954466 ! Fit after self-cal, rms=0.071471Jy sigma=0.954414 wmodel J2359-3133_S_2005_06_01_yyk\_map.mod ! Writing 53 model components to file: J2359-3133_S_2005_06_01_yyk_map.mod wobs J2359-3133_S_2005_06_01_yyk\_uvs.fits ! Writing UV FITS file: J2359-3133_S_2005_06_01_yyk_uvs.fits wwins J2359-3133_S_2005_06_01_yyk\_map.win ! wwins: Wrote 1 windows to J2359-3133_S_2005_06_01_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000658922 Jy ! Component: 100 - total flux cleaned = -0.00107397 Jy ! Component: 150 - total flux cleaned = -0.00193813 Jy ! Component: 200 - total flux cleaned = -0.00291854 Jy ! Component: 250 - total flux cleaned = -0.00409044 Jy ! Component: 300 - total flux cleaned = -0.00519842 Jy ! Component: 350 - total flux cleaned = -0.00602738 Jy ! Component: 400 - total flux cleaned = -0.00653283 Jy ! Component: 450 - total flux cleaned = -0.00694805 Jy ! Component: 500 - total flux cleaned = -0.00747596 Jy ! Component: 550 - total flux cleaned = -0.0076034 Jy ! Component: 600 - total flux cleaned = -0.00784663 Jy ! Component: 650 - total flux cleaned = -0.00796311 Jy ! Component: 700 - total flux cleaned = -0.00818946 Jy ! Component: 750 - total flux cleaned = -0.00840721 Jy ! Component: 800 - total flux cleaned = -0.00840779 Jy ! Component: 850 - total flux cleaned = -0.00851095 Jy ! Component: 900 - total flux cleaned = -0.00851045 Jy ! Component: 950 - total flux cleaned = -0.00846193 Jy ! Component: 1000 - total flux cleaned = -0.0084631 Jy ! Component: 1050 - total flux cleaned = -0.00850958 Jy ! Component: 1100 - total flux cleaned = -0.00851013 Jy ! Component: 1150 - total flux cleaned = -0.00855434 Jy ! Component: 1200 - total flux cleaned = -0.00846721 Jy ! Component: 1250 - total flux cleaned = -0.00850912 Jy ! Component: 1300 - total flux cleaned = -0.00838402 Jy ! Component: 1350 - total flux cleaned = -0.00842557 Jy ! Component: 1400 - total flux cleaned = -0.00838465 Jy ! Component: 1450 - total flux cleaned = -0.00846427 Jy ! Component: 1500 - total flux cleaned = -0.00873803 Jy ! Component: 1550 - total flux cleaned = -0.00885342 Jy ! Component: 1600 - total flux cleaned = -0.00904316 Jy ! Component: 1650 - total flux cleaned = -0.00926754 Jy ! Component: 1700 - total flux cleaned = -0.00948822 Jy ! Component: 1750 - total flux cleaned = -0.00963345 Jy ! Component: 1800 - total flux cleaned = -0.00977679 Jy ! Component: 1850 - total flux cleaned = -0.00995306 Jy ! Component: 1900 - total flux cleaned = -0.0101274 Jy ! Component: 1950 - total flux cleaned = -0.0103338 Jy ! Component: 2000 - total flux cleaned = -0.0105717 Jy ! Total flux subtracted in 2048 components = -0.0107061 Jy ! Clean residual min=-0.001966 max=0.002402 Jy/beam ! Clean residual mean=-0.000005 rms=0.000681 Jy/beam ! Combined flux in latest and established models = 0.558472 Jy keep ! Adding 118 model components to the UV plane model. ! The established model now contains 171 components and 0.558471 Jy ![Exited script file: muppet] wmap "J2359-3133_S_2005_06_01_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.997 x 8.277 at -9.164 degrees (North through East) ! Clean map min=-0.004315 max=0.54996 Jy/beam ! Writing clean map to FITS file: J2359-3133_S_2005_06_01_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.549957 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00067518 device "J2359-3133_S_2005_06_01_yyk\_map.eps/VPS" ! Attempting to open device: 'J2359-3133_S_2005_06_01_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.368309 0.368309 0.736617 1.47323 2.94647 5.89294 11.7859 23.5718 47.1435 94.287 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.549 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.997 x 8.277 at -9.164 degrees (North through East) ! Clean map min=-0.004315 max=0.54996 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2359-3133_S_2005_06_01_yyk\_map.gif/gif" ! Attempting to open device: 'J2359-3133_S_2005_06_01_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2359-3133_S_2005_06_01_yyk_uvs.log closed on Sat Oct 8 17:47:46 2005