! Started logfile: J2355-2125_X_2005_06_30_yyk_uvs.log on Sat Oct 8 17:47:34 2005 obs J2355-2125_X_2005_06_30_yyk_uve.fits ! Reading UV FITS file: J2355-2125_X_2005_06_30_yyk_uve.fits ! AN table 1: 13 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.899145 visibilities/baseline/integration-bin. ! Found source: J2355-2125 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1460 lines of history. ! ! Reading 2104 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2355-2125_X_2005_06_30_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.210654 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8351 mas, bmaj=3.281 mas, bpa=22.17 degrees ! Estimated noise=1.39999 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.151638 Jy ! Component: 100 - total flux cleaned = 0.195347 Jy ! Total flux subtracted in 100 components = 0.195347 Jy ! Clean residual min=-0.011503 max=0.029982 Jy/beam ! Clean residual mean=-0.000080 rms=0.004159 Jy/beam ! Combined flux in latest and established models = 0.195347 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.195347 Jy ! ! Correcting IF 1. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.090904Jy sigma=1.543856 ! Fit after self-cal, rms=0.090808Jy sigma=1.539563 ! Inverting map and beam ! Estimated beam: bmin=0.8351 mas, bmaj=3.281 mas, bpa=22.17 degrees ! Estimated noise=1.39999 mJy/beam. ! Added new window around map position (0.2, -21.8). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0340719 Jy ! Component: 100 - total flux cleaned = 0.0532777 Jy ! Total flux subtracted in 100 components = 0.0532777 Jy ! Clean residual min=-0.007659 max=0.009688 Jy/beam ! Clean residual mean=-0.000044 rms=0.002530 Jy/beam ! Combined flux in latest and established models = 0.248625 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 36 components and 0.248625 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078083Jy sigma=1.233576 ! Fit after self-cal, rms=0.077398Jy sigma=1.220858 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.111 mas, bmaj=4.021 mas, bpa=20.66 degrees ! Estimated noise=0.987266 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0223946 Jy ! Component: 100 - total flux cleaned = 0.0358317 Jy ! Component: 150 - total flux cleaned = 0.0446252 Jy ! Component: 200 - total flux cleaned = 0.0506817 Jy ! Total flux subtracted in 200 components = 0.0506817 Jy ! Clean residual min=-0.005915 max=0.005159 Jy/beam ! Clean residual mean=-0.000008 rms=0.001496 Jy/beam ! Combined flux in latest and established models = 0.299307 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 58 model components to the UV plane model. ! The established model now contains 86 components and 0.299307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073215Jy sigma=1.101097 ! Fit after self-cal, rms=0.072995Jy sigma=1.096656 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.111 x 4.021 at 20.66 degrees (North through East) ! Clean map min=-0.0048101 max=0.19075 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01573 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.94 HN 1.09 KP 0.95 ! LA 0.98 MK 1.00* NL 1.00 OV 1.02 ! PT 0.95 SC 0.96 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.0206 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.96 HN 1.07 KP 0.90 ! LA 0.96 MK 1.00* NL 1.01 OV 0.95 ! PT 1.00 SC 0.96 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.997465 ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.03 HN 1.02 KP 0.86 ! LA 0.99 MK 1.00* NL 1.05 OV 1.02 ! PT 1.04 SC 0.95 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.072995Jy sigma=1.096656 ! Fit after self-cal, rms=0.071423Jy sigma=1.069821 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071423Jy sigma=1.069821 ! Fit after self-cal, rms=0.071424Jy sigma=1.069772 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.105 mas, bmaj=4.1 mas, bpa=21.12 degrees ! Estimated noise=0.974853 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00501986 Jy ! Component: 100 - total flux cleaned = 0.00767903 Jy ! Component: 150 - total flux cleaned = 0.00814564 Jy ! Component: 200 - total flux cleaned = 0.00840686 Jy ! Total flux subtracted in 200 components = 0.00840686 Jy ! Clean residual min=-0.003857 max=0.003187 Jy/beam ! Clean residual mean=0.000006 rms=0.000985 Jy/beam ! Combined flux in latest and established models = 0.307714 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 108 components and 0.307714 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071155Jy sigma=1.063214 ! Fit after self-cal, rms=0.071122Jy sigma=1.062535 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071122Jy sigma=1.062535 ! Fit after self-cal, rms=0.068542Jy sigma=1.013403 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00202896 Jy ! Component: 100 - total flux cleaned = 0.00248889 Jy ! Component: 150 - total flux cleaned = 0.00268243 Jy ! Component: 200 - total flux cleaned = 0.00277242 Jy ! Total flux subtracted in 200 components = 0.00277242 Jy ! Clean residual min=-0.003907 max=0.003115 Jy/beam ! Clean residual mean=0.000007 rms=0.000940 Jy/beam ! Combined flux in latest and established models = 0.310486 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 116 components and 0.310486 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068480Jy sigma=1.011851 ! Fit after self-cal, rms=0.068431Jy sigma=1.007828 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.105 x 4.1 at 21.12 degrees (North through East) ! Clean map min=-0.0036393 max=0.18926 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068431Jy sigma=1.007828 ! Fit after self-cal, rms=0.068001Jy sigma=0.987696 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068001Jy sigma=0.987696 ! Fit after self-cal, rms=0.068106Jy sigma=0.987145 ! Inverting map and beam ! Estimated beam: bmin=1.102 mas, bmaj=4.096 mas, bpa=21.02 degrees ! Estimated noise=0.964932 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00124295 Jy ! Component: 100 - total flux cleaned = -0.00129815 Jy ! Component: 150 - total flux cleaned = -0.00125466 Jy ! Component: 200 - total flux cleaned = -0.00117498 Jy ! Total flux subtracted in 200 components = -0.00117498 Jy ! Clean residual min=-0.003439 max=0.002801 Jy/beam ! Clean residual mean=0.000002 rms=0.000828 Jy/beam ! Combined flux in latest and established models = 0.309311 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 126 components and 0.309311 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068019Jy sigma=0.985660 ! Fit after self-cal, rms=0.068083Jy sigma=0.985474 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068083Jy sigma=0.985474 ! Fit after self-cal, rms=0.067253Jy sigma=0.981760 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067253Jy sigma=0.981760 ! Fit after self-cal, rms=0.067285Jy sigma=0.981697 ! Inverting map and beam ! Estimated beam: bmin=1.106 mas, bmaj=4.123 mas, bpa=21.04 degrees ! Estimated noise=0.953999 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00312586 Jy ! Component: 100 - total flux cleaned = -0.0047264 Jy ! Component: 150 - total flux cleaned = -0.00571548 Jy ! Component: 200 - total flux cleaned = -0.00585274 Jy ! Total flux subtracted in 200 components = -0.00585274 Jy ! Clean residual min=-0.003249 max=0.002791 Jy/beam ! Clean residual mean=0.000029 rms=0.000863 Jy/beam ! Combined flux in latest and established models = 0.303458 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 134 components and 0.303458 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067137Jy sigma=0.978860 ! Fit after self-cal, rms=0.067155Jy sigma=0.978736 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.493 mas, bmaj=5.821 mas, bpa=9.715 degrees ! Estimated noise=1.10427 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000326085 Jy ! Component: 100 - total flux cleaned = -0.000323864 Jy ! Component: 150 - total flux cleaned = -0.000299837 Jy ! Component: 200 - total flux cleaned = -0.000300227 Jy ! Total flux subtracted in 200 components = -0.000300227 Jy ! Clean residual min=-0.002928 max=0.002934 Jy/beam ! Clean residual mean=0.000044 rms=0.000990 Jy/beam ! Combined flux in latest and established models = 0.303158 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 149 components and 0.303158 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067136Jy sigma=0.978538 ! Fit after self-cal, rms=0.067143Jy sigma=0.978448 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8351 mas, bmaj=3.321 mas, bpa=22.24 degrees ! Estimated noise=1.36934 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.149063 Jy ! Component: 100 - total flux cleaned = 0.197522 Jy ! Component: 150 - total flux cleaned = 0.226716 Jy ! Component: 200 - total flux cleaned = 0.246282 Jy ! Total flux subtracted in 200 components = 0.246282 Jy ! Clean residual min=-0.007229 max=0.008429 Jy/beam ! Clean residual mean=-0.000026 rms=0.002067 Jy/beam ! Combined flux in latest and established models = 0.246282 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.246282 Jy ! Inverting map and beam ! Estimated beam: bmin=1.106 mas, bmaj=4.123 mas, bpa=21.04 degrees ! Estimated noise=0.953999 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0210001 Jy ! Component: 100 - total flux cleaned = 0.0333435 Jy ! Component: 150 - total flux cleaned = 0.0412526 Jy ! Component: 200 - total flux cleaned = 0.0465653 Jy ! Total flux subtracted in 200 components = 0.0465653 Jy ! Clean residual min=-0.003645 max=0.003753 Jy/beam ! Clean residual mean=0.000022 rms=0.001046 Jy/beam ! Combined flux in latest and established models = 0.292847 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 70 components and 0.292847 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.493 mas, bmaj=5.821 mas, bpa=9.715 degrees ! Estimated noise=1.10427 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00468659 Jy ! Component: 100 - total flux cleaned = 0.00737633 Jy ! Component: 150 - total flux cleaned = 0.00902063 Jy ! Component: 200 - total flux cleaned = 0.00969855 Jy ! Total flux subtracted in 200 components = 0.00969855 Jy ! Clean residual min=-0.003056 max=0.003017 Jy/beam ! Clean residual mean=0.000045 rms=0.000995 Jy/beam ! Combined flux in latest and established models = 0.302546 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 107 components and 0.302546 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.106 mas, bmaj=4.123 mas, bpa=21.04 degrees ! Estimated noise=0.953999 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000550684 Jy ! Component: 100 - total flux cleaned = 0.000668186 Jy ! Component: 150 - total flux cleaned = 0.000716523 Jy ! Component: 200 - total flux cleaned = 0.000761568 Jy ! Total flux subtracted in 200 components = 0.000761568 Jy ! Clean residual min=-0.003562 max=0.002985 Jy/beam ! Clean residual mean=0.000029 rms=0.000875 Jy/beam ! Combined flux in latest and established models = 0.303307 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 122 components and 0.303307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067323Jy sigma=0.981438 ! Fit after self-cal, rms=0.067310Jy sigma=0.981163 wmodel J2355-2125_X_2005_06_30_yyk\_map.mod ! Writing 122 model components to file: J2355-2125_X_2005_06_30_yyk_map.mod wobs J2355-2125_X_2005_06_30_yyk\_uvs.fits ! Writing UV FITS file: J2355-2125_X_2005_06_30_yyk_uvs.fits wwins J2355-2125_X_2005_06_30_yyk\_map.win ! wwins: Wrote 2 windows to J2355-2125_X_2005_06_30_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -2.19914e-06 Jy ! Component: 100 - total flux cleaned = 0.000565788 Jy ! Component: 150 - total flux cleaned = 0.000854376 Jy ! Component: 200 - total flux cleaned = 0.000765457 Jy ! Component: 250 - total flux cleaned = 0.000504853 Jy ! Component: 300 - total flux cleaned = 0.000168487 Jy ! Component: 350 - total flux cleaned = -0.000198742 Jy ! Component: 400 - total flux cleaned = -0.000517686 Jy ! Component: 450 - total flux cleaned = -0.000750969 Jy ! Component: 500 - total flux cleaned = -0.00101799 Jy ! Component: 550 - total flux cleaned = -0.00120418 Jy ! Component: 600 - total flux cleaned = -0.00135068 Jy ! Component: 650 - total flux cleaned = -0.00160118 Jy ! Component: 700 - total flux cleaned = -0.00174138 Jy ! Component: 750 - total flux cleaned = -0.00187833 Jy ! Component: 800 - total flux cleaned = -0.00184393 Jy ! Component: 850 - total flux cleaned = -0.00191167 Jy ! Component: 900 - total flux cleaned = -0.00207466 Jy ! Component: 950 - total flux cleaned = -0.00201023 Jy ! Component: 1000 - total flux cleaned = -0.00207394 Jy ! Component: 1050 - total flux cleaned = -0.00210527 Jy ! Component: 1100 - total flux cleaned = -0.00216671 Jy ! Component: 1150 - total flux cleaned = -0.00222704 Jy ! Component: 1200 - total flux cleaned = -0.00234588 Jy ! Component: 1250 - total flux cleaned = -0.00231653 Jy ! Component: 1300 - total flux cleaned = -0.00246151 Jy ! Component: 1350 - total flux cleaned = -0.00246123 Jy ! Component: 1400 - total flux cleaned = -0.00257395 Jy ! Component: 1450 - total flux cleaned = -0.00262912 Jy ! Component: 1500 - total flux cleaned = -0.0026844 Jy ! Component: 1550 - total flux cleaned = -0.00268404 Jy ! Component: 1600 - total flux cleaned = -0.00273753 Jy ! Component: 1650 - total flux cleaned = -0.00279028 Jy ! Component: 1700 - total flux cleaned = -0.00292093 Jy ! Component: 1750 - total flux cleaned = -0.00292075 Jy ! Component: 1800 - total flux cleaned = -0.00299785 Jy ! Component: 1850 - total flux cleaned = -0.00302322 Jy ! Component: 1900 - total flux cleaned = -0.00307375 Jy ! Component: 1950 - total flux cleaned = -0.00307405 Jy ! Component: 2000 - total flux cleaned = -0.00309896 Jy ! Total flux subtracted in 2048 components = -0.00312346 Jy ! Clean residual min=-0.001692 max=0.001352 Jy/beam ! Clean residual mean=0.000021 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.300184 Jy keep ! Adding 129 model components to the UV plane model. ! The established model now contains 251 components and 0.300184 Jy ![Exited script file: muppet] wmap "J2355-2125_X_2005_06_30_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.106 x 4.123 at 21.04 degrees (North through East) ! Clean map min=-0.0030405 max=0.18644 Jy/beam ! Writing clean map to FITS file: J2355-2125_X_2005_06_30_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.186443 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000491029 device "J2355-2125_X_2005_06_30_yyk\_map.eps/VPS" ! Attempting to open device: 'J2355-2125_X_2005_06_30_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.790102 0.790102 1.5802 3.16041 6.32082 12.6416 25.2833 50.5665 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.186 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.106 x 4.123 at 21.04 degrees (North through East) ! Clean map min=-0.0030405 max=0.18644 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2355-2125_X_2005_06_30_yyk\_map.gif/gif" ! Attempting to open device: 'J2355-2125_X_2005_06_30_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2355-2125_X_2005_06_30_yyk_uvs.log closed on Sat Oct 8 17:47:38 2005