! Started logfile: J2222-1144_S_2005_05_12_yyk_uvs.log on Sat Oct 8 17:44:58 2005 obs J2222-1144_S_2005_05_12_yyk_uve.fits ! Reading UV FITS file: J2222-1144_S_2005_05_12_yyk_uve.fits ! AN table 1: 11 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.850505 visibilities/baseline/integration-bin. ! Found source: J2222-1144 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1443 lines of history. ! ! Reading 1684 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2222-1144_S_2005_05_12_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.126289 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.514 mas, bmaj=6.651 mas, bpa=-0.009224 degrees ! Estimated noise=1.29858 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0880956 Jy ! Component: 100 - total flux cleaned = 0.105139 Jy ! Total flux subtracted in 100 components = 0.105139 Jy ! Clean residual min=-0.007490 max=0.006338 Jy/beam ! Clean residual mean=0.000058 rms=0.001686 Jy/beam ! Combined flux in latest and established models = 0.105139 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.105139 Jy ! ! Correcting IF 1. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.067048Jy sigma=1.061061 ! Fit after self-cal, rms=0.066568Jy sigma=1.055230 ! Inverting map and beam ! Estimated beam: bmin=2.514 mas, bmaj=6.651 mas, bpa=-0.009224 degrees ! Estimated noise=1.29858 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.144 mas, bmaj=8.362 mas, bpa=-3.015 degrees ! Estimated noise=0.961942 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0085245 Jy ! Component: 100 - total flux cleaned = 0.0114646 Jy ! Component: 150 - total flux cleaned = 0.0126082 Jy ! Component: 200 - total flux cleaned = 0.0128197 Jy ! Total flux subtracted in 200 components = 0.0128197 Jy ! Clean residual min=-0.005319 max=0.003863 Jy/beam ! Clean residual mean=0.000047 rms=0.001147 Jy/beam ! Combined flux in latest and established models = 0.117959 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 34 components and 0.117959 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065716Jy sigma=1.040471 ! Fit after self-cal, rms=0.065711Jy sigma=1.040331 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.144 x 8.362 at -3.015 degrees (North through East) ! Clean map min=-0.0051118 max=0.10427 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.04631 ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.99 HN 1.00 KP 0.98 ! LA 1.01 MK 0.89 NL 0.95 OV 0.93 ! PT 1.03 SC 0.86 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00738 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.09 HN 1.06 KP 1.04 ! LA 0.97 MK 0.94 NL 0.97 OV 0.98 ! PT 1.00 SC 0.88 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.02915 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.04 HN 0.92 KP 0.95 ! LA 1.02 MK 1.12 NL 0.93 OV 0.88 ! PT 0.96 SC 0.96 ! ! ! Fit before self-cal, rms=0.065711Jy sigma=1.040331 ! Fit after self-cal, rms=0.064350Jy sigma=1.033099 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064350Jy sigma=1.033099 ! Fit after self-cal, rms=0.064338Jy sigma=1.032895 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.097 mas, bmaj=8.059 mas, bpa=-1.705 degrees ! Estimated noise=0.966134 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0025885 Jy ! Component: 100 - total flux cleaned = 0.00288178 Jy ! Component: 150 - total flux cleaned = 0.00300282 Jy ! Component: 200 - total flux cleaned = 0.00305238 Jy ! Total flux subtracted in 200 components = 0.00305238 Jy ! Clean residual min=-0.004767 max=0.003533 Jy/beam ! Clean residual mean=0.000075 rms=0.001080 Jy/beam ! Combined flux in latest and established models = 0.121011 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 41 components and 0.121011 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064185Jy sigma=1.031366 ! Fit after self-cal, rms=0.064178Jy sigma=1.031185 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064178Jy sigma=1.031185 ! Fit after self-cal, rms=0.061590Jy sigma=0.985719 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000978587 Jy ! Component: 100 - total flux cleaned = 0.00100461 Jy ! Component: 150 - total flux cleaned = 0.0009719 Jy ! Component: 200 - total flux cleaned = 0.000956472 Jy ! Total flux subtracted in 200 components = 0.000956472 Jy ! Clean residual min=-0.004729 max=0.003542 Jy/beam ! Clean residual mean=0.000079 rms=0.001044 Jy/beam ! Combined flux in latest and established models = 0.121968 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 50 components and 0.121968 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061565Jy sigma=0.985401 ! Fit after self-cal, rms=0.061173Jy sigma=0.980092 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.097 x 8.059 at -1.705 degrees (North through East) ! Clean map min=-0.0046506 max=0.10575 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061173Jy sigma=0.980092 ! Fit after self-cal, rms=0.058584Jy sigma=0.971039 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058584Jy sigma=0.971039 ! Fit after self-cal, rms=0.058487Jy sigma=0.969930 ! Inverting map and beam ! Estimated beam: bmin=3.051 mas, bmaj=7.892 mas, bpa=-0.6246 degrees ! Estimated noise=0.932867 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00244351 Jy ! Component: 100 - total flux cleaned = -0.00240915 Jy ! Component: 150 - total flux cleaned = -0.00246627 Jy ! Component: 200 - total flux cleaned = -0.00254393 Jy ! Total flux subtracted in 200 components = -0.00254393 Jy ! Clean residual min=-0.004363 max=0.003353 Jy/beam ! Clean residual mean=0.000065 rms=0.000981 Jy/beam ! Combined flux in latest and established models = 0.119424 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 53 components and 0.119424 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058386Jy sigma=0.968027 ! Fit after self-cal, rms=0.058356Jy sigma=0.967748 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058356Jy sigma=0.967748 ! Fit after self-cal, rms=0.057737Jy sigma=0.968231 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057737Jy sigma=0.968231 ! Fit after self-cal, rms=0.057725Jy sigma=0.968040 ! Inverting map and beam ! Estimated beam: bmin=3.073 mas, bmaj=7.839 mas, bpa=0.1117 degrees ! Estimated noise=0.914336 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00226541 Jy ! Component: 100 - total flux cleaned = -0.00222644 Jy ! Component: 150 - total flux cleaned = -0.00217123 Jy ! Component: 200 - total flux cleaned = -0.00215223 Jy ! Total flux subtracted in 200 components = -0.00215223 Jy ! Clean residual min=-0.004021 max=0.003332 Jy/beam ! Clean residual mean=0.000083 rms=0.000968 Jy/beam ! Combined flux in latest and established models = 0.117272 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 55 components and 0.117272 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057639Jy sigma=0.966470 ! Fit after self-cal, rms=0.057630Jy sigma=0.966418 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.672 mas, bmaj=15.43 mas, bpa=9.444 degrees ! Estimated noise=1.17664 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000265553 Jy ! Component: 100 - total flux cleaned = 0.000319551 Jy ! Component: 150 - total flux cleaned = 0.000336184 Jy ! Component: 200 - total flux cleaned = 0.000350406 Jy ! Total flux subtracted in 200 components = 0.000350406 Jy ! Clean residual min=-0.003327 max=0.004490 Jy/beam ! Clean residual mean=0.000168 rms=0.001375 Jy/beam ! Combined flux in latest and established models = 0.117622 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 63 components and 0.117622 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057662Jy sigma=0.966570 ! Fit after self-cal, rms=0.057661Jy sigma=0.966532 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.5 mas, bmaj=6.509 mas, bpa=1.811 degrees ! Estimated noise=1.21427 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0843462 Jy ! Component: 100 - total flux cleaned = 0.101897 Jy ! Component: 150 - total flux cleaned = 0.110539 Jy ! Component: 200 - total flux cleaned = 0.115108 Jy ! Total flux subtracted in 200 components = 0.115108 Jy ! Clean residual min=-0.004610 max=0.004214 Jy/beam ! Clean residual mean=0.000051 rms=0.001204 Jy/beam ! Combined flux in latest and established models = 0.115108 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.115108 Jy ! Inverting map and beam ! Estimated beam: bmin=3.073 mas, bmaj=7.839 mas, bpa=0.1117 degrees ! Estimated noise=0.914336 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00209107 Jy ! Component: 100 - total flux cleaned = 0.00242775 Jy ! Component: 150 - total flux cleaned = 0.00246562 Jy ! Component: 200 - total flux cleaned = 0.00248064 Jy ! Total flux subtracted in 200 components = 0.00248064 Jy ! Clean residual min=-0.004043 max=0.003310 Jy/beam ! Clean residual mean=0.000081 rms=0.000969 Jy/beam ! Combined flux in latest and established models = 0.117589 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 43 components and 0.117589 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.672 mas, bmaj=15.43 mas, bpa=9.444 degrees ! Estimated noise=1.17664 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000193237 Jy ! Component: 100 - total flux cleaned = 0.00023231 Jy ! Component: 150 - total flux cleaned = 0.000229956 Jy ! Component: 200 - total flux cleaned = 0.00022731 Jy ! Total flux subtracted in 200 components = 0.00022731 Jy ! Clean residual min=-0.003315 max=0.004458 Jy/beam ! Clean residual mean=0.000166 rms=0.001375 Jy/beam ! Combined flux in latest and established models = 0.117816 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 50 components and 0.117816 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.073 mas, bmaj=7.839 mas, bpa=0.1117 degrees ! Estimated noise=0.914336 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000228033 Jy ! Component: 100 - total flux cleaned = -0.000245518 Jy ! Component: 150 - total flux cleaned = -0.000259712 Jy ! Component: 200 - total flux cleaned = -0.000259245 Jy ! Total flux subtracted in 200 components = -0.000259245 Jy ! Clean residual min=-0.004049 max=0.003320 Jy/beam ! Clean residual mean=0.000082 rms=0.000969 Jy/beam ! Combined flux in latest and established models = 0.117557 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 63 components and 0.117557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057629Jy sigma=0.966382 ! Fit after self-cal, rms=0.057622Jy sigma=0.966362 wmodel J2222-1144_S_2005_05_12_yyk\_map.mod ! Writing 63 model components to file: J2222-1144_S_2005_05_12_yyk_map.mod wobs J2222-1144_S_2005_05_12_yyk\_uvs.fits ! Writing UV FITS file: J2222-1144_S_2005_05_12_yyk_uvs.fits wwins J2222-1144_S_2005_05_12_yyk\_map.win ! wwins: Wrote 1 windows to J2222-1144_S_2005_05_12_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000431699 Jy ! Component: 100 - total flux cleaned = 2.13513e-05 Jy ! Component: 150 - total flux cleaned = -0.00013555 Jy ! Component: 200 - total flux cleaned = -8.6868e-05 Jy ! Component: 250 - total flux cleaned = 5.13314e-06 Jy ! Component: 300 - total flux cleaned = 0.000139152 Jy ! Component: 350 - total flux cleaned = 0.000268741 Jy ! Component: 400 - total flux cleaned = 0.000435858 Jy ! Component: 450 - total flux cleaned = 0.000272297 Jy ! Component: 500 - total flux cleaned = 0.000152506 Jy ! Component: 550 - total flux cleaned = 3.59676e-05 Jy ! Component: 600 - total flux cleaned = 7.38452e-05 Jy ! Component: 650 - total flux cleaned = 3.70828e-05 Jy ! Component: 700 - total flux cleaned = 3.75225e-05 Jy ! Component: 750 - total flux cleaned = 2.82612e-06 Jy ! Component: 800 - total flux cleaned = 2.68043e-06 Jy ! Component: 850 - total flux cleaned = 3.68799e-05 Jy ! Component: 900 - total flux cleaned = 2.92791e-06 Jy ! Component: 950 - total flux cleaned = -9.5761e-05 Jy ! Component: 1000 - total flux cleaned = -0.000224818 Jy ! Component: 1050 - total flux cleaned = -0.000319347 Jy ! Component: 1100 - total flux cleaned = -0.000381769 Jy ! Component: 1150 - total flux cleaned = -0.000535594 Jy ! Component: 1200 - total flux cleaned = -0.000717254 Jy ! Component: 1250 - total flux cleaned = -0.000836664 Jy ! Component: 1300 - total flux cleaned = -0.00101348 Jy ! Component: 1350 - total flux cleaned = -0.00115908 Jy ! Component: 1400 - total flux cleaned = -0.00133115 Jy ! Component: 1450 - total flux cleaned = -0.00152975 Jy ! Component: 1500 - total flux cleaned = -0.0016691 Jy ! Component: 1550 - total flux cleaned = -0.00180726 Jy ! Component: 1600 - total flux cleaned = -0.0019439 Jy ! Component: 1650 - total flux cleaned = -0.00210581 Jy ! Component: 1700 - total flux cleaned = -0.00215915 Jy ! Component: 1750 - total flux cleaned = -0.00215923 Jy ! Component: 1800 - total flux cleaned = -0.00221194 Jy ! Component: 1850 - total flux cleaned = -0.00231551 Jy ! Component: 1900 - total flux cleaned = -0.00231558 Jy ! Component: 1950 - total flux cleaned = -0.00244283 Jy ! Component: 2000 - total flux cleaned = -0.00244247 Jy ! Total flux subtracted in 2048 components = -0.00251713 Jy ! Clean residual min=-0.001312 max=0.001363 Jy/beam ! Clean residual mean=0.000045 rms=0.000515 Jy/beam ! Combined flux in latest and established models = 0.11504 Jy keep ! Adding 139 model components to the UV plane model. ! The established model now contains 202 components and 0.11504 Jy ![Exited script file: muppet] wmap "J2222-1144_S_2005_05_12_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.073 x 7.839 at 0.1117 degrees (North through East) ! Clean map min=-0.0028126 max=0.099784 Jy/beam ! Writing clean map to FITS file: J2222-1144_S_2005_05_12_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0997844 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000508971 device "J2222-1144_S_2005_05_12_yyk\_map.eps/VPS" ! Attempting to open device: 'J2222-1144_S_2005_05_12_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.53021 1.53021 3.06042 6.12085 12.2417 24.4834 48.9668 97.9336 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.099 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.073 x 7.839 at 0.1117 degrees (North through East) ! Clean map min=-0.0028126 max=0.099784 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2222-1144_S_2005_05_12_yyk\_map.gif/gif" ! Attempting to open device: 'J2222-1144_S_2005_05_12_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2222-1144_S_2005_05_12_yyk_uvs.log closed on Sat Oct 8 17:45:02 2005