! Started logfile: J2129-1538_X_2005_05_12_yyk_uvs.log on Sat Oct  8 17:43:48 2005
obs J2129-1538_X_2005_05_12_yyk_uve.fits
! Reading UV FITS file: J2129-1538_X_2005_05_12_yyk_uve.fits
! AN table 1: 5 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.924444 visibilities/baseline/integration-bin.
! Found source: J2129-1538
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40997e+09        8e+06          1        8e+06
!  02        2  8.47997e+09        8e+06          1        8e+06
!  03        3  8.79497e+09        8e+06          1        8e+06
!  04        4  8.89997e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1438 lines of history.
! 
! Reading 832 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J2129-1538_X_2005_05_12_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 1.09462 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.717 mas, bmaj=1.918 mas, bpa=-4.339 degrees
! Estimated noise=1.89027 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.909127 Jy
! Component: 100  -  total flux cleaned = 1.09985 Jy
! Total flux subtracted in 100 components = 1.09985 Jy
! Clean residual min=-0.024402 max=0.050570 Jy/beam
! Clean residual mean=-0.000269 rms=0.008509 Jy/beam
! Combined flux in latest and established models = 1.09985 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 1.09985 Jy
! 
! Correcting IF 1.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.149060Jy  sigma=2.330045
! Fit after  self-cal, rms=0.148923Jy  sigma=2.319637
! Inverting map and beam 
! Estimated beam: bmin=0.717 mas, bmaj=1.918 mas, bpa=-4.339 degrees
! Estimated noise=1.89027 mJy/beam.
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.067998 Jy
! Component: 100  -  total flux cleaned = 0.101005 Jy
! Total flux subtracted in 100 components = 0.101005 Jy
! Clean residual min=-0.017815 max=0.017695 Jy/beam
! Clean residual mean=-0.000097 rms=0.004437 Jy/beam
! Combined flux in latest and established models = 1.20086 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 18 model components to the UV plane model.
! The established model now contains 27 components and 1.20086 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.117284Jy  sigma=1.612708
! Fit after  self-cal, rms=0.117387Jy  sigma=1.609392
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8749 mas, bmaj=2.368 mas, bpa=-7.249 degrees
! Estimated noise=1.42415 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.027809 Jy
! Component: 100  -  total flux cleaned = 0.0406437 Jy
! Component: 150  -  total flux cleaned = 0.046171 Jy
! Component: 200  -  total flux cleaned = 0.0474621 Jy
! Total flux subtracted in 200 components = 0.0474621 Jy
! Clean residual min=-0.014780 max=0.012968 Jy/beam
! Clean residual mean=-0.000033 rms=0.003753 Jy/beam
! Combined flux in latest and established models = 1.24832 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 23 model components to the UV plane model.
! The established model now contains 44 components and 1.24832 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.112754Jy  sigma=1.506496
! Fit after  self-cal, rms=0.112835Jy  sigma=1.505840
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8749 x 2.368 at -7.249 degrees (North through East)
! Clean map  min=-0.014022  max=1.0447 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 0.999493
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.99     HN        1.06     KP        0.98     
!   LA        1.01     MK        1.01     NL        0.99     OV        1.01     
!   PT        0.95     SC        1.02     
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 1.00734
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.07     KP        0.93     
!   LA        1.02     MK        0.99     NL        0.98     OV        0.98     
!   PT        1.00     SC        0.97     
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 1.00031
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.02     HN        0.99     KP        0.89     
!   LA        1.00     MK        1.02     NL        0.96     OV        1.02     
!   PT        1.03     SC        1.03     
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 0.978204
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.03     HN        1.06     KP        1.02     
!   LA        0.97     MK        1.00     NL        0.99     OV        1.04     
!   PT        1.08     SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.112835Jy  sigma=1.505840
! Fit after  self-cal, rms=0.099131Jy  sigma=1.188559
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.099131Jy  sigma=1.188559
! Fit after  self-cal, rms=0.099126Jy  sigma=1.188546
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8821 mas, bmaj=2.383 mas, bpa=-7.384 degrees
! Estimated noise=1.42028 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00625686 Jy
! Component: 100  -  total flux cleaned = -0.00690859 Jy
! Component: 150  -  total flux cleaned = -0.00732214 Jy
! Component: 200  -  total flux cleaned = -0.00767007 Jy
! Total flux subtracted in 200 components = -0.00767007 Jy
! Clean residual min=-0.007115 max=0.008474 Jy/beam
! Clean residual mean=-0.000016 rms=0.001855 Jy/beam
! Combined flux in latest and established models = 1.24065 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 14 model components to the UV plane model.
! The established model now contains 55 components and 1.24065 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.098614Jy  sigma=1.179101
! Fit after  self-cal, rms=0.098652Jy  sigma=1.178703
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.098652Jy  sigma=1.178703
! Fit after  self-cal, rms=0.092611Jy  sigma=1.116173
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (7.8, -15).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00625526 Jy
! Component: 100  -  total flux cleaned = 0.00624792 Jy
! Component: 150  -  total flux cleaned = 0.00650643 Jy
! Component: 200  -  total flux cleaned = 0.00671468 Jy
! Total flux subtracted in 200 components = 0.00671468 Jy
! Clean residual min=-0.006403 max=0.006105 Jy/beam
! Clean residual mean=0.000008 rms=0.001661 Jy/beam
! Combined flux in latest and established models = 1.24737 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 19 model components to the UV plane model.
! The established model now contains 73 components and 1.24737 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091683Jy  sigma=1.100061
! Fit after  self-cal, rms=0.090701Jy  sigma=1.091193
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8821 x 2.383 at -7.384 degrees (North through East)
! Clean map  min=-0.0059941  max=1.0452 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090701Jy  sigma=1.091193
! Fit after  self-cal, rms=0.089001Jy  sigma=1.022503
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089001Jy  sigma=1.022503
! Fit after  self-cal, rms=0.088901Jy  sigma=1.021083
! Inverting map and beam 
! Estimated beam: bmin=0.881 mas, bmaj=2.379 mas, bpa=-7.382 degrees
! Estimated noise=1.41881 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000826081 Jy
! Component: 100  -  total flux cleaned = 0.000830278 Jy
! Component: 150  -  total flux cleaned = 0.00101001 Jy
! Component: 200  -  total flux cleaned = 0.00101047 Jy
! Total flux subtracted in 200 components = 0.00101047 Jy
! Clean residual min=-0.005365 max=0.005628 Jy/beam
! Clean residual mean=0.000006 rms=0.001456 Jy/beam
! Combined flux in latest and established models = 1.24838 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 20 model components to the UV plane model.
! The established model now contains 84 components and 1.24838 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088684Jy  sigma=1.017214
! Fit after  self-cal, rms=0.088643Jy  sigma=1.016782
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088643Jy  sigma=1.016782
! Fit after  self-cal, rms=0.086154Jy  sigma=0.975904
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.086154Jy  sigma=0.975904
! Fit after  self-cal, rms=0.086166Jy  sigma=0.975855
! Inverting map and beam 
! Estimated beam: bmin=0.8807 mas, bmaj=2.379 mas, bpa=-7.409 degrees
! Estimated noise=1.41831 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000326951 Jy
! Component: 100  -  total flux cleaned = 0.000476965 Jy
! Component: 150  -  total flux cleaned = 0.000612451 Jy
! Component: 200  -  total flux cleaned = 0.000613599 Jy
! Total flux subtracted in 200 components = 0.000613599 Jy
! Clean residual min=-0.005203 max=0.005618 Jy/beam
! Clean residual mean=0.000005 rms=0.001419 Jy/beam
! Combined flux in latest and established models = 1.24899 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 21 model components to the UV plane model.
! The established model now contains 87 components and 1.24899 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.086040Jy  sigma=0.973640
! Fit after  self-cal, rms=0.086017Jy  sigma=0.973543
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.266 mas, bmaj=4.707 mas, bpa=0.9763 degrees
! Estimated noise=1.78982 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000232212 Jy
! Component: 100  -  total flux cleaned = -6.91625e-05 Jy
! Component: 150  -  total flux cleaned = -1.04991e-05 Jy
! Component: 200  -  total flux cleaned = 3.90176e-05 Jy
! Total flux subtracted in 200 components = 3.90175e-05 Jy
! Clean residual min=-0.005813 max=0.005764 Jy/beam
! Clean residual mean=0.000015 rms=0.001802 Jy/beam
! Combined flux in latest and established models = 1.24903 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 12 model components to the UV plane model.
! The established model now contains 94 components and 1.24903 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085975Jy  sigma=0.973025
! Fit after  self-cal, rms=0.085922Jy  sigma=0.972122
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7182 mas, bmaj=1.918 mas, bpa=-4.458 degrees
! Estimated noise=1.89044 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.910398 Jy
! Component: 100  -  total flux cleaned = 1.10337 Jy
! Component: 150  -  total flux cleaned = 1.17018 Jy
! Component: 200  -  total flux cleaned = 1.20038 Jy
! Total flux subtracted in 200 components = 1.20038 Jy
! Clean residual min=-0.009522 max=0.012110 Jy/beam
! Clean residual mean=-0.000092 rms=0.002761 Jy/beam
! Combined flux in latest and established models = 1.20038 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 1.20038 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8807 mas, bmaj=2.379 mas, bpa=-7.409 degrees
! Estimated noise=1.41831 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.4, -2.4).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0223767 Jy
! Component: 100  -  total flux cleaned = 0.0339036 Jy
! Component: 150  -  total flux cleaned = 0.0409199 Jy
! Component: 200  -  total flux cleaned = 0.0453984 Jy
! Total flux subtracted in 200 components = 0.0453984 Jy
! Clean residual min=-0.005264 max=0.005270 Jy/beam
! Clean residual mean=-0.000009 rms=0.001352 Jy/beam
! Combined flux in latest and established models = 1.24578 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 54 components and 1.24578 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.266 mas, bmaj=4.707 mas, bpa=0.9763 degrees
! Estimated noise=1.78982 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0037245 Jy
! Component: 100  -  total flux cleaned = 0.00442329 Jy
! Component: 150  -  total flux cleaned = 0.0048947 Jy
! Component: 200  -  total flux cleaned = 0.00514038 Jy
! Total flux subtracted in 200 components = 0.00514038 Jy
! Clean residual min=-0.005161 max=0.005444 Jy/beam
! Clean residual mean=0.000024 rms=0.001604 Jy/beam
! Combined flux in latest and established models = 1.25092 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 74 components and 1.25092 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8807 mas, bmaj=2.379 mas, bpa=-7.409 degrees
! Estimated noise=1.41831 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 8.72378e-05 Jy
! Component: 100  -  total flux cleaned = 0.000163156 Jy
! Component: 150  -  total flux cleaned = 0.000229562 Jy
! Component: 200  -  total flux cleaned = 0.000293408 Jy
! Total flux subtracted in 200 components = 0.000293408 Jy
! Clean residual min=-0.005010 max=0.005294 Jy/beam
! Clean residual mean=0.000010 rms=0.001273 Jy/beam
! Combined flux in latest and established models = 1.25121 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 26 model components to the UV plane model.
! The established model now contains 94 components and 1.25121 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085866Jy  sigma=0.969087
! Fit after  self-cal, rms=0.085815Jy  sigma=0.968459
wmodel J2129-1538_X_2005_05_12_yyk\_map.mod
! Writing 94 model components to file: J2129-1538_X_2005_05_12_yyk_map.mod
wobs J2129-1538_X_2005_05_12_yyk\_uvs.fits
! Writing UV FITS file: J2129-1538_X_2005_05_12_yyk_uvs.fits
wwins J2129-1538_X_2005_05_12_yyk\_map.win
! wwins: Wrote 3 windows to J2129-1538_X_2005_05_12_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00069746 Jy
! Component: 100  -  total flux cleaned = 0.000936964 Jy
! Component: 150  -  total flux cleaned = 0.000866718 Jy
! Component: 200  -  total flux cleaned = 0.000938244 Jy
! Component: 250  -  total flux cleaned = 0.0010043 Jy
! Component: 300  -  total flux cleaned = 0.00138046 Jy
! Component: 350  -  total flux cleaned = 0.00180013 Jy
! Component: 400  -  total flux cleaned = 0.00220364 Jy
! Component: 450  -  total flux cleaned = 0.00242571 Jy
! Component: 500  -  total flux cleaned = 0.00269333 Jy
! Component: 550  -  total flux cleaned = 0.00289964 Jy
! Component: 600  -  total flux cleaned = 0.0032014 Jy
! Component: 650  -  total flux cleaned = 0.00349559 Jy
! Component: 700  -  total flux cleaned = 0.00392289 Jy
! Component: 750  -  total flux cleaned = 0.00424528 Jy
! Component: 800  -  total flux cleaned = 0.00455847 Jy
! Component: 850  -  total flux cleaned = 0.00477654 Jy
! Component: 900  -  total flux cleaned = 0.00494707 Jy
! Component: 950  -  total flux cleaned = 0.00498878 Jy
! Component: 1000  -  total flux cleaned = 0.00507045 Jy
! Component: 1050  -  total flux cleaned = 0.00502996 Jy
! Component: 1100  -  total flux cleaned = 0.00499061 Jy
! Component: 1150  -  total flux cleaned = 0.00495221 Jy
! Component: 1200  -  total flux cleaned = 0.00491449 Jy
! Component: 1250  -  total flux cleaned = 0.00487763 Jy
! Component: 1300  -  total flux cleaned = 0.00469666 Jy
! Component: 1350  -  total flux cleaned = 0.00458912 Jy
! Component: 1400  -  total flux cleaned = 0.00455416 Jy
! Component: 1450  -  total flux cleaned = 0.00438075 Jy
! Component: 1500  -  total flux cleaned = 0.00434694 Jy
! Component: 1550  -  total flux cleaned = 0.00427932 Jy
! Component: 1600  -  total flux cleaned = 0.00427953 Jy
! Component: 1650  -  total flux cleaned = 0.00424687 Jy
! Component: 1700  -  total flux cleaned = 0.00427885 Jy
! Component: 1750  -  total flux cleaned = 0.00431068 Jy
! Component: 1800  -  total flux cleaned = 0.00434203 Jy
! Component: 1850  -  total flux cleaned = 0.00431074 Jy
! Component: 1900  -  total flux cleaned = 0.00431061 Jy
! Component: 1950  -  total flux cleaned = 0.0044332 Jy
! Component: 2000  -  total flux cleaned = 0.0043729 Jy
! Total flux subtracted in 2048 components = 0.00449362 Jy
! Clean residual min=-0.001782 max=0.001660 Jy/beam
! Clean residual mean=-0.000002 rms=0.000551 Jy/beam
! Combined flux in latest and established models = 1.2557 Jy
keep
! Adding 127 model components to the UV plane model.
! The established model now contains 221 components and 1.2557 Jy
![Exited script file: muppet]
wmap "J2129-1538_X_2005_05_12_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8807 x 2.379 at -7.409 degrees (North through East)
! Clean map  min=-0.0036625  max=1.0497 Jy/beam
! Writing clean map to FITS file: J2129-1538_X_2005_05_12_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 1.04966 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000535371 
device "J2129-1538_X_2005_05_12_yyk\_map.eps/VPS"
! Attempting to open device: 'J2129-1538_X_2005_05_12_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.153013 0.153013 0.306026 0.612052 1.2241 2.44821 4.89641 9.79282 19.5856 39.1713 78.3426
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0016 
print "peak=",int(peak_flux*1000)/1000
! peak= 1.049 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8807 x 2.379 at -7.409 degrees (North through East)
! Clean map  min=-0.0036625  max=1.0497 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J2129-1538_X_2005_05_12_yyk\_map.gif/gif"
! Attempting to open device: 'J2129-1538_X_2005_05_12_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J2129-1538_X_2005_05_12_yyk_uvs.log closed on Sat Oct  8 17:43:52 2005