! Started logfile: J2034-1640_X_2005_05_12_yyk_uvs.log on Sat Oct 8 17:42:14 2005 obs J2034-1640_X_2005_05_12_yyk_uve.fits ! Reading UV FITS file: J2034-1640_X_2005_05_12_yyk_uve.fits ! AN table 1: 14 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.957143 visibilities/baseline/integration-bin. ! Found source: J2034-1640 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1439 lines of history. ! ! Reading 2412 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2034-1640_X_2005_05_12_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.138919 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7059 mas, bmaj=1.71 mas, bpa=5.998 degrees ! Estimated noise=1.45907 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.10184 Jy ! Component: 100 - total flux cleaned = 0.122004 Jy ! Total flux subtracted in 100 components = 0.122004 Jy ! Clean residual min=-0.005896 max=0.006638 Jy/beam ! Clean residual mean=0.000011 rms=0.001625 Jy/beam ! Combined flux in latest and established models = 0.122004 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.122004 Jy ! ! Correcting IF 1. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.058768Jy sigma=1.020278 ! Fit after self-cal, rms=0.058634Jy sigma=1.017676 ! Inverting map and beam ! Estimated beam: bmin=0.7059 mas, bmaj=1.71 mas, bpa=5.998 degrees ! Estimated noise=1.45907 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9608 mas, bmaj=2.272 mas, bpa=2.877 degrees ! Estimated noise=0.836328 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0108432 Jy ! Component: 100 - total flux cleaned = 0.0143264 Jy ! Component: 150 - total flux cleaned = 0.015792 Jy ! Component: 200 - total flux cleaned = 0.016107 Jy ! Total flux subtracted in 200 components = 0.016107 Jy ! Clean residual min=-0.004220 max=0.004398 Jy/beam ! Clean residual mean=-0.000003 rms=0.001025 Jy/beam ! Combined flux in latest and established models = 0.138111 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 18 components and 0.138111 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057315Jy sigma=0.989903 ! Fit after self-cal, rms=0.057280Jy sigma=0.989496 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9608 x 2.272 at 2.877 degrees (North through East) ! Clean map min=-0.003825 max=0.12384 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00375 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.99 HN 1.00* KP 0.98 ! LA 0.99 MK 0.98 NL 1.02 OV 1.04 ! PT 1.00 SC 1.00 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00725 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.07 HN 1.00* KP 0.90 ! LA 1.00 MK 1.03 NL 0.99 OV 0.97 ! PT 1.01 SC 0.99 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.979372 ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.01 HN 1.00* KP 1.00 ! LA 0.96 MK 0.99 NL 0.97 OV 1.07 ! PT 1.09 SC 1.00* ! ! ! Fit before self-cal, rms=0.057280Jy sigma=0.989496 ! Fit after self-cal, rms=0.057087Jy sigma=0.981296 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057087Jy sigma=0.981296 ! Fit after self-cal, rms=0.057076Jy sigma=0.981107 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.961 mas, bmaj=2.269 mas, bpa=2.95 degrees ! Estimated noise=0.836016 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000114084 Jy ! Component: 100 - total flux cleaned = 0.000142465 Jy ! Component: 150 - total flux cleaned = 0.000122622 Jy ! Component: 200 - total flux cleaned = 0.000103877 Jy ! Total flux subtracted in 200 components = 0.000103877 Jy ! Clean residual min=-0.003034 max=0.003930 Jy/beam ! Clean residual mean=0.000007 rms=0.000854 Jy/beam ! Combined flux in latest and established models = 0.138215 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 23 components and 0.138215 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057061Jy sigma=0.980712 ! Fit after self-cal, rms=0.057035Jy sigma=0.980446 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057035Jy sigma=0.980446 ! Fit after self-cal, rms=0.054820Jy sigma=0.937482 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (23, -2.2). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0034637 Jy ! Component: 100 - total flux cleaned = 0.00400641 Jy ! Component: 150 - total flux cleaned = 0.00455816 Jy ! Component: 200 - total flux cleaned = 0.00482263 Jy ! Total flux subtracted in 200 components = 0.00482263 Jy ! Clean residual min=-0.003131 max=0.002786 Jy/beam ! Clean residual mean=0.000012 rms=0.000756 Jy/beam ! Combined flux in latest and established models = 0.143037 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 49 components and 0.143037 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054654Jy sigma=0.933400 ! Fit after self-cal, rms=0.054492Jy sigma=0.930754 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.961 x 2.269 at 2.95 degrees (North through East) ! Clean map min=-0.0029105 max=0.12483 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054492Jy sigma=0.930754 ! Fit after self-cal, rms=0.054518Jy sigma=0.924732 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054518Jy sigma=0.924732 ! Fit after self-cal, rms=0.054521Jy sigma=0.924477 ! Inverting map and beam ! Estimated beam: bmin=0.9613 mas, bmaj=2.266 mas, bpa=3.157 degrees ! Estimated noise=0.835893 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000763736 Jy ! Component: 100 - total flux cleaned = 0.000834683 Jy ! Component: 150 - total flux cleaned = 0.000898074 Jy ! Component: 200 - total flux cleaned = 0.000954379 Jy ! Total flux subtracted in 200 components = 0.000954379 Jy ! Clean residual min=-0.002890 max=0.002737 Jy/beam ! Clean residual mean=0.000027 rms=0.000709 Jy/beam ! Combined flux in latest and established models = 0.143992 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 56 components and 0.143992 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054483Jy sigma=0.923820 ! Fit after self-cal, rms=0.054482Jy sigma=0.923774 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054482Jy sigma=0.923774 ! Fit after self-cal, rms=0.053925Jy sigma=0.916724 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053925Jy sigma=0.916724 ! Fit after self-cal, rms=0.053932Jy sigma=0.916653 ! Inverting map and beam ! Estimated beam: bmin=0.964 mas, bmaj=2.265 mas, bpa=3.291 degrees ! Estimated noise=0.831608 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000157986 Jy ! Component: 100 - total flux cleaned = -1.07333e-06 Jy ! Component: 150 - total flux cleaned = -8.74299e-05 Jy ! Component: 200 - total flux cleaned = -0.000191923 Jy ! Total flux subtracted in 200 components = -0.000191923 Jy ! Clean residual min=-0.002764 max=0.002758 Jy/beam ! Clean residual mean=0.000015 rms=0.000705 Jy/beam ! Combined flux in latest and established models = 0.1438 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 66 components and 0.1438 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053908Jy sigma=0.916071 ! Fit after self-cal, rms=0.053904Jy sigma=0.916042 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.484 mas, bmaj=5.471 mas, bpa=18.72 degrees ! Estimated noise=1.02352 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000155341 Jy ! Component: 100 - total flux cleaned = -1.1417e-05 Jy ! Component: 150 - total flux cleaned = -8.055e-05 Jy ! Component: 200 - total flux cleaned = -7.92065e-05 Jy ! Total flux subtracted in 200 components = -7.92065e-05 Jy ! Clean residual min=-0.002606 max=0.002936 Jy/beam ! Clean residual mean=0.000027 rms=0.000879 Jy/beam ! Combined flux in latest and established models = 0.14372 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 76 components and 0.143721 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053927Jy sigma=0.916145 ! Fit after self-cal, rms=0.053906Jy sigma=0.915945 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7061 mas, bmaj=1.709 mas, bpa=6.051 degrees ! Estimated noise=1.45799 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.102709 Jy ! Component: 100 - total flux cleaned = 0.122699 Jy ! Component: 150 - total flux cleaned = 0.131834 Jy ! Component: 200 - total flux cleaned = 0.137135 Jy ! Total flux subtracted in 200 components = 0.137135 Jy ! Clean residual min=-0.004690 max=0.005083 Jy/beam ! Clean residual mean=0.000011 rms=0.001254 Jy/beam ! Combined flux in latest and established models = 0.137135 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.137135 Jy ! Inverting map and beam ! Estimated beam: bmin=0.964 mas, bmaj=2.265 mas, bpa=3.291 degrees ! Estimated noise=0.831608 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.2, -1.4). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00493914 Jy ! Component: 100 - total flux cleaned = 0.00676094 Jy ! Component: 150 - total flux cleaned = 0.00697788 Jy ! Component: 200 - total flux cleaned = 0.00721854 Jy ! Total flux subtracted in 200 components = 0.00721854 Jy ! Clean residual min=-0.002753 max=0.002713 Jy/beam ! Clean residual mean=0.000014 rms=0.000691 Jy/beam ! Combined flux in latest and established models = 0.144353 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 48 components and 0.144353 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.484 mas, bmaj=5.471 mas, bpa=18.72 degrees ! Estimated noise=1.02352 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000549378 Jy ! Component: 100 - total flux cleaned = 0.000723097 Jy ! Component: 150 - total flux cleaned = 0.000804821 Jy ! Component: 200 - total flux cleaned = 0.000805086 Jy ! Total flux subtracted in 200 components = 0.000805086 Jy ! Clean residual min=-0.002615 max=0.002710 Jy/beam ! Clean residual mean=0.000014 rms=0.000828 Jy/beam ! Combined flux in latest and established models = 0.145158 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 71 components and 0.145158 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.964 mas, bmaj=2.265 mas, bpa=3.291 degrees ! Estimated noise=0.831608 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000143084 Jy ! Component: 100 - total flux cleaned = -9.97471e-05 Jy ! Component: 150 - total flux cleaned = -0.000137787 Jy ! Component: 200 - total flux cleaned = -0.000137928 Jy ! Total flux subtracted in 200 components = -0.000137928 Jy ! Clean residual min=-0.002601 max=0.002747 Jy/beam ! Clean residual mean=0.000008 rms=0.000671 Jy/beam ! Combined flux in latest and established models = 0.14502 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 81 components and 0.14502 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053896Jy sigma=0.915419 ! Fit after self-cal, rms=0.053886Jy sigma=0.915250 wmodel J2034-1640_X_2005_05_12_yyk\_map.mod ! Writing 81 model components to file: J2034-1640_X_2005_05_12_yyk_map.mod wobs J2034-1640_X_2005_05_12_yyk\_uvs.fits ! Writing UV FITS file: J2034-1640_X_2005_05_12_yyk_uvs.fits wwins J2034-1640_X_2005_05_12_yyk\_map.win ! wwins: Wrote 3 windows to J2034-1640_X_2005_05_12_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000200216 Jy ! Component: 100 - total flux cleaned = 0.000160974 Jy ! Component: 150 - total flux cleaned = -0.000258032 Jy ! Component: 200 - total flux cleaned = -0.000402413 Jy ! Component: 250 - total flux cleaned = -0.000505071 Jy ! Component: 300 - total flux cleaned = -0.000570536 Jy ! Component: 350 - total flux cleaned = -0.000696266 Jy ! Component: 400 - total flux cleaned = -0.000817431 Jy ! Component: 450 - total flux cleaned = -0.000905469 Jy ! Component: 500 - total flux cleaned = -0.000963098 Jy ! Component: 550 - total flux cleaned = -0.0010754 Jy ! Component: 600 - total flux cleaned = -0.00126698 Jy ! Component: 650 - total flux cleaned = -0.00129297 Jy ! Component: 700 - total flux cleaned = -0.00137186 Jy ! Component: 750 - total flux cleaned = -0.001398 Jy ! Component: 800 - total flux cleaned = -0.00142322 Jy ! Component: 850 - total flux cleaned = -0.0014476 Jy ! Component: 900 - total flux cleaned = -0.00139877 Jy ! Component: 950 - total flux cleaned = -0.00135124 Jy ! Component: 1000 - total flux cleaned = -0.00135154 Jy ! Component: 1050 - total flux cleaned = -0.00130591 Jy ! Component: 1100 - total flux cleaned = -0.00126081 Jy ! Component: 1150 - total flux cleaned = -0.00117192 Jy ! Component: 1200 - total flux cleaned = -0.00112811 Jy ! Component: 1250 - total flux cleaned = -0.00102016 Jy ! Component: 1300 - total flux cleaned = -0.00102031 Jy ! Component: 1350 - total flux cleaned = -0.000978191 Jy ! Component: 1400 - total flux cleaned = -0.000936629 Jy ! Component: 1450 - total flux cleaned = -0.000794025 Jy ! Component: 1500 - total flux cleaned = -0.000754145 Jy ! Component: 1550 - total flux cleaned = -0.000714666 Jy ! Component: 1600 - total flux cleaned = -0.000694998 Jy ! Component: 1650 - total flux cleaned = -0.000598078 Jy ! Component: 1700 - total flux cleaned = -0.000578599 Jy ! Component: 1750 - total flux cleaned = -0.000483905 Jy ! Component: 1800 - total flux cleaned = -0.000409206 Jy ! Component: 1850 - total flux cleaned = -0.000427586 Jy ! Component: 1900 - total flux cleaned = -0.0004273 Jy ! Component: 1950 - total flux cleaned = -0.000409116 Jy ! Component: 2000 - total flux cleaned = -0.000409187 Jy ! Total flux subtracted in 2048 components = -0.000426898 Jy ! Clean residual min=-0.000948 max=0.001040 Jy/beam ! Clean residual mean=-0.000001 rms=0.000326 Jy/beam ! Combined flux in latest and established models = 0.144593 Jy keep ! Adding 115 model components to the UV plane model. ! The established model now contains 196 components and 0.144593 Jy ![Exited script file: muppet] wmap "J2034-1640_X_2005_05_12_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.964 x 2.265 at 3.291 degrees (North through East) ! Clean map min=-0.0017736 max=0.1249 Jy/beam ! Writing clean map to FITS file: J2034-1640_X_2005_05_12_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.124904 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000324786 device "J2034-1640_X_2005_05_12_yyk\_map.eps/VPS" ! Attempting to open device: 'J2034-1640_X_2005_05_12_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.780087 0.780087 1.56017 3.12035 6.24069 12.4814 24.9628 49.9256 99.8511 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.124 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.964 x 2.265 at 3.291 degrees (North through East) ! Clean map min=-0.0017736 max=0.1249 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2034-1640_X_2005_05_12_yyk\_map.gif/gif" ! Attempting to open device: 'J2034-1640_X_2005_05_12_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2034-1640_X_2005_05_12_yyk_uvs.log closed on Sat Oct 8 17:42:18 2005