! Started logfile: J1951-0509_S_2005_06_01_yyk_uvs.log on Sat Oct 8 17:41:10 2005 obs J1951-0509_S_2005_06_01_yyk_uve.fits ! Reading UV FITS file: J1951-0509_S_2005_06_01_yyk_uve.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.78 visibilities/baseline/integration-bin. ! Found source: J1951-0509 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1801 lines of history. ! ! Reading 1404 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1951-0509_S_2005_06_01_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.182323 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.552 mas, bmaj=6.62 mas, bpa=-1.856 degrees ! Estimated noise=1.23964 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.142192 Jy ! Component: 100 - total flux cleaned = 0.172349 Jy ! Total flux subtracted in 100 components = 0.172349 Jy ! Clean residual min=-0.007702 max=0.008615 Jy/beam ! Clean residual mean=0.000009 rms=0.001883 Jy/beam ! Combined flux in latest and established models = 0.172349 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.172349 Jy ! ! Correcting IF 1. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.061525Jy sigma=1.166118 ! Fit after self-cal, rms=0.060994Jy sigma=1.153595 ! Inverting map and beam ! Estimated beam: bmin=2.552 mas, bmaj=6.619 mas, bpa=-1.866 degrees ! Estimated noise=1.24029 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.112 mas, bmaj=8.257 mas, bpa=-4.073 degrees ! Estimated noise=0.946671 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00937182 Jy ! Component: 100 - total flux cleaned = 0.0128116 Jy ! Component: 150 - total flux cleaned = 0.013929 Jy ! Component: 200 - total flux cleaned = 0.0140129 Jy ! Total flux subtracted in 200 components = 0.0140129 Jy ! Clean residual min=-0.005502 max=0.005504 Jy/beam ! Clean residual mean=-0.000104 rms=0.001453 Jy/beam ! Combined flux in latest and established models = 0.186362 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 37 components and 0.186362 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059280Jy sigma=1.131799 ! Fit after self-cal, rms=0.059264Jy sigma=1.131530 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.112 x 8.257 at -4.073 degrees (North through East) ! Clean map min=-0.0055362 max=0.16287 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.02254 ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.99 HN 0.96 KP 0.96 ! LA 1.17 MK 0.87 NL 0.90 OV 0.95 ! PT 1.07 SC 0.97 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.988097 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.10 HN 0.96 KP 0.95 ! LA 1.09 MK 0.99 NL 0.98 OV 0.96 ! PT 1.02 SC 1.03 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.059264Jy sigma=1.131530 ! Fit after self-cal, rms=0.056086Jy sigma=1.102251 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056086Jy sigma=1.102251 ! Fit after self-cal, rms=0.056088Jy sigma=1.102199 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.049 mas, bmaj=8.197 mas, bpa=-4.744 degrees ! Estimated noise=0.948585 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0035102 Jy ! Component: 100 - total flux cleaned = 0.00449819 Jy ! Component: 150 - total flux cleaned = 0.00466137 Jy ! Component: 200 - total flux cleaned = 0.00474421 Jy ! Total flux subtracted in 200 components = 0.00474421 Jy ! Clean residual min=-0.004735 max=0.005198 Jy/beam ! Clean residual mean=0.000030 rms=0.001252 Jy/beam ! Combined flux in latest and established models = 0.191106 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 50 components and 0.191106 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055788Jy sigma=1.098840 ! Fit after self-cal, rms=0.055781Jy sigma=1.098776 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055781Jy sigma=1.098776 ! Fit after self-cal, rms=0.054178Jy sigma=1.059491 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000466975 Jy ! Component: 100 - total flux cleaned = 0.000446966 Jy ! Component: 150 - total flux cleaned = 0.000406711 Jy ! Component: 200 - total flux cleaned = 0.000350927 Jy ! Total flux subtracted in 200 components = 0.000350927 Jy ! Clean residual min=-0.004632 max=0.005295 Jy/beam ! Clean residual mean=0.000029 rms=0.001238 Jy/beam ! Combined flux in latest and established models = 0.191457 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 63 components and 0.191457 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054131Jy sigma=1.059180 ! Fit after self-cal, rms=0.053967Jy sigma=1.054543 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.049 x 8.197 at -4.744 degrees (North through East) ! Clean map min=-0.0045624 max=0.16336 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053967Jy sigma=1.054543 ! Fit after self-cal, rms=0.053440Jy sigma=1.044946 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053440Jy sigma=1.044946 ! Fit after self-cal, rms=0.053418Jy sigma=1.044029 ! Inverting map and beam ! Estimated beam: bmin=3.008 mas, bmaj=8.141 mas, bpa=-5.049 degrees ! Estimated noise=0.944356 mJy/beam. ! Added new window around map position (-42.5, 62.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00542745 Jy ! Component: 100 - total flux cleaned = 0.00719286 Jy ! Component: 150 - total flux cleaned = 0.00788236 Jy ! Component: 200 - total flux cleaned = 0.0083864 Jy ! Total flux subtracted in 200 components = 0.0083864 Jy ! Clean residual min=-0.003746 max=0.004208 Jy/beam ! Clean residual mean=-0.000005 rms=0.001038 Jy/beam ! Combined flux in latest and established models = 0.199844 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 87 components and 0.199844 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052960Jy sigma=1.033891 ! Fit after self-cal, rms=0.052901Jy sigma=1.032941 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052901Jy sigma=1.032941 ! Fit after self-cal, rms=0.052519Jy sigma=1.015157 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052519Jy sigma=1.015157 ! Fit after self-cal, rms=0.052513Jy sigma=1.015046 ! Inverting map and beam ! Estimated beam: bmin=3.004 mas, bmaj=8.085 mas, bpa=-4.863 degrees ! Estimated noise=0.952605 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00241076 Jy ! Component: 100 - total flux cleaned = 0.0031728 Jy ! Component: 150 - total flux cleaned = 0.00368836 Jy ! Component: 200 - total flux cleaned = 0.00412807 Jy ! Total flux subtracted in 200 components = 0.00412807 Jy ! Clean residual min=-0.003779 max=0.003960 Jy/beam ! Clean residual mean=-0.000006 rms=0.000988 Jy/beam ! Combined flux in latest and established models = 0.203972 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 42 model components to the UV plane model. ! The established model now contains 109 components and 0.203972 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052325Jy sigma=1.012572 ! Fit after self-cal, rms=0.052318Jy sigma=1.012476 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.572 mas, bmaj=13.88 mas, bpa=1.833 degrees ! Estimated noise=1.23458 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000924065 Jy ! Component: 100 - total flux cleaned = 0.00126661 Jy ! Component: 150 - total flux cleaned = 0.00133002 Jy ! Component: 200 - total flux cleaned = 0.00138667 Jy ! Total flux subtracted in 200 components = 0.00138667 Jy ! Clean residual min=-0.003529 max=0.004448 Jy/beam ! Clean residual mean=-0.000026 rms=0.001210 Jy/beam ! Combined flux in latest and established models = 0.205358 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 120 components and 0.205358 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052357Jy sigma=1.012577 ! Fit after self-cal, rms=0.052348Jy sigma=1.012488 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.51 mas, bmaj=6.585 mas, bpa=-2.535 degrees ! Estimated noise=1.22238 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.141785 Jy ! Component: 100 - total flux cleaned = 0.173872 Jy ! Component: 150 - total flux cleaned = 0.186486 Jy ! Component: 200 - total flux cleaned = 0.192693 Jy ! Total flux subtracted in 200 components = 0.192693 Jy ! Clean residual min=-0.005895 max=0.004860 Jy/beam ! Clean residual mean=0.000013 rms=0.001297 Jy/beam ! Combined flux in latest and established models = 0.192693 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.192693 Jy ! Inverting map and beam ! Estimated beam: bmin=3.004 mas, bmaj=8.085 mas, bpa=-4.863 degrees ! Estimated noise=0.952605 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00533618 Jy ! Component: 100 - total flux cleaned = 0.00844636 Jy ! Component: 150 - total flux cleaned = 0.00952358 Jy ! Component: 200 - total flux cleaned = 0.0102408 Jy ! Total flux subtracted in 200 components = 0.0102408 Jy ! Clean residual min=-0.003877 max=0.004013 Jy/beam ! Clean residual mean=-0.000009 rms=0.001003 Jy/beam ! Combined flux in latest and established models = 0.202934 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 66 components and 0.202934 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.572 mas, bmaj=13.88 mas, bpa=1.833 degrees ! Estimated noise=1.23458 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00144644 Jy ! Component: 100 - total flux cleaned = 0.00180855 Jy ! Component: 150 - total flux cleaned = 0.00205837 Jy ! Component: 200 - total flux cleaned = 0.0022355 Jy ! Total flux subtracted in 200 components = 0.0022355 Jy ! Clean residual min=-0.003534 max=0.004420 Jy/beam ! Clean residual mean=-0.000026 rms=0.001207 Jy/beam ! Combined flux in latest and established models = 0.20517 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 78 components and 0.20517 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.004 mas, bmaj=8.085 mas, bpa=-4.863 degrees ! Estimated noise=0.952605 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000418617 Jy ! Component: 100 - total flux cleaned = 0.000581662 Jy ! Component: 150 - total flux cleaned = 0.000716655 Jy ! Component: 200 - total flux cleaned = 0.000805349 Jy ! Total flux subtracted in 200 components = 0.000805349 Jy ! Clean residual min=-0.003867 max=0.004024 Jy/beam ! Clean residual mean=-0.000011 rms=0.000983 Jy/beam ! Combined flux in latest and established models = 0.205975 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 96 components and 0.205975 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052273Jy sigma=1.012245 ! Fit after self-cal, rms=0.052276Jy sigma=1.012196 wmodel J1951-0509_S_2005_06_01_yyk\_map.mod ! Writing 96 model components to file: J1951-0509_S_2005_06_01_yyk_map.mod wobs J1951-0509_S_2005_06_01_yyk\_uvs.fits ! Writing UV FITS file: J1951-0509_S_2005_06_01_yyk_uvs.fits wwins J1951-0509_S_2005_06_01_yyk\_map.win ! wwins: Wrote 2 windows to J1951-0509_S_2005_06_01_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000969405 Jy ! Component: 100 - total flux cleaned = 0.00136148 Jy ! Component: 150 - total flux cleaned = 0.00130304 Jy ! Component: 200 - total flux cleaned = 0.00135717 Jy ! Component: 250 - total flux cleaned = 0.00140927 Jy ! Component: 300 - total flux cleaned = 0.00160459 Jy ! Component: 350 - total flux cleaned = 0.00165166 Jy ! Component: 400 - total flux cleaned = 0.00165109 Jy ! Component: 450 - total flux cleaned = 0.00164886 Jy ! Component: 500 - total flux cleaned = 0.00143207 Jy ! Component: 550 - total flux cleaned = 0.00138954 Jy ! Component: 600 - total flux cleaned = 0.00138826 Jy ! Component: 650 - total flux cleaned = 0.00130872 Jy ! Component: 700 - total flux cleaned = 0.00123159 Jy ! Component: 750 - total flux cleaned = 0.00134641 Jy ! Component: 800 - total flux cleaned = 0.00145834 Jy ! Component: 850 - total flux cleaned = 0.00160439 Jy ! Component: 900 - total flux cleaned = 0.00174797 Jy ! Component: 950 - total flux cleaned = 0.00192383 Jy ! Component: 1000 - total flux cleaned = 0.00206187 Jy ! Component: 1050 - total flux cleaned = 0.00226626 Jy ! Component: 1100 - total flux cleaned = 0.00239953 Jy ! Component: 1150 - total flux cleaned = 0.00246546 Jy ! Component: 1200 - total flux cleaned = 0.0025947 Jy ! Component: 1250 - total flux cleaned = 0.00269049 Jy ! Component: 1300 - total flux cleaned = 0.002722 Jy ! Component: 1350 - total flux cleaned = 0.0027841 Jy ! Component: 1400 - total flux cleaned = 0.00275403 Jy ! Component: 1450 - total flux cleaned = 0.00290568 Jy ! Component: 1500 - total flux cleaned = 0.00296529 Jy ! Component: 1550 - total flux cleaned = 0.0029354 Jy ! Component: 1600 - total flux cleaned = 0.00293522 Jy ! Component: 1650 - total flux cleaned = 0.00290646 Jy ! Component: 1700 - total flux cleaned = 0.00276422 Jy ! Component: 1750 - total flux cleaned = 0.00284859 Jy ! Component: 1800 - total flux cleaned = 0.00284856 Jy ! Component: 1850 - total flux cleaned = 0.00279349 Jy ! Component: 1900 - total flux cleaned = 0.00284748 Jy ! Component: 1950 - total flux cleaned = 0.00268567 Jy ! Component: 2000 - total flux cleaned = 0.00255226 Jy ! Total flux subtracted in 2048 components = 0.00255245 Jy ! Clean residual min=-0.001569 max=0.002063 Jy/beam ! Clean residual mean=-0.000035 rms=0.000543 Jy/beam ! Combined flux in latest and established models = 0.208527 Jy keep ! Adding 140 model components to the UV plane model. ! The established model now contains 236 components and 0.208527 Jy ![Exited script file: muppet] wmap "J1951-0509_S_2005_06_01_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.004 x 8.085 at -4.863 degrees (North through East) ! Clean map min=-0.0030922 max=0.16394 Jy/beam ! Writing clean map to FITS file: J1951-0509_S_2005_06_01_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.163938 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00054133 device "J1951-0509_S_2005_06_01_yyk\_map.eps/VPS" ! Attempting to open device: 'J1951-0509_S_2005_06_01_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.990611 0.990611 1.98122 3.96244 7.92489 15.8498 31.6995 63.3991 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.163 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.004 x 8.085 at -4.863 degrees (North through East) ! Clean map min=-0.0030922 max=0.16394 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1951-0509_S_2005_06_01_yyk\_map.gif/gif" ! Attempting to open device: 'J1951-0509_S_2005_06_01_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1951-0509_S_2005_06_01_yyk_uvs.log closed on Sat Oct 8 17:41:13 2005