! Started logfile: J1945-0153_X_2005_06_30_yyk_uvs.log on Sat Oct 8 17:40:56 2005 obs J1945-0153_X_2005_06_30_yyk_uve.fits ! Reading UV FITS file: J1945-0153_X_2005_06_30_yyk_uve.fits ! AN table 1: 20 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.961111 visibilities/baseline/integration-bin. ! Found source: J1945-0153 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1460 lines of history. ! ! Reading 3460 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1945-0153_X_2005_06_30_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.16967 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6896 mas, bmaj=1.814 mas, bpa=-0.3877 degrees ! Estimated noise=0.851533 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.130722 Jy ! Component: 100 - total flux cleaned = 0.156879 Jy ! Total flux subtracted in 100 components = 0.156879 Jy ! Clean residual min=-0.006425 max=0.007255 Jy/beam ! Clean residual mean=-0.000008 rms=0.001619 Jy/beam ! Combined flux in latest and established models = 0.156879 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.156879 Jy ! ! Correcting IF 1. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.066170Jy sigma=1.212221 ! Fit after self-cal, rms=0.065824Jy sigma=1.203397 ! Inverting map and beam ! Estimated beam: bmin=0.6896 mas, bmaj=1.814 mas, bpa=-0.3877 degrees ! Estimated noise=0.851533 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8604 mas, bmaj=2.108 mas, bpa=-0.5802 degrees ! Estimated noise=0.597712 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.013158 Jy ! Component: 100 - total flux cleaned = 0.0182774 Jy ! Component: 150 - total flux cleaned = 0.0205101 Jy ! Component: 200 - total flux cleaned = 0.0209778 Jy ! Total flux subtracted in 200 components = 0.0209778 Jy ! Clean residual min=-0.004046 max=0.003202 Jy/beam ! Clean residual mean=-0.000002 rms=0.000947 Jy/beam ! Combined flux in latest and established models = 0.177856 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 39 components and 0.177857 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064363Jy sigma=1.165485 ! Fit after self-cal, rms=0.064351Jy sigma=1.165288 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8604 x 2.108 at -0.5802 degrees (North through East) ! Clean map min=-0.0035319 max=0.15485 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.02046 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.97 HN 1.02 KP 0.95 ! LA 1.01 MK 1.01 NL 1.01 OV 1.00 ! PT 0.95 SC 0.92 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.02397 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.98 HN 1.00 KP 0.94 ! LA 1.00 MK 1.00 NL 0.98 OV 0.98 ! PT 1.00 SC 0.90 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.991393 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.03 HN 0.98 KP 0.88 ! LA 1.02 MK 1.04 NL 1.00 OV 1.07 ! PT 1.04 SC 1.00 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.064351Jy sigma=1.165288 ! Fit after self-cal, rms=0.063741Jy sigma=1.157623 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063741Jy sigma=1.157623 ! Fit after self-cal, rms=0.063738Jy sigma=1.157533 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8574 mas, bmaj=2.092 mas, bpa=0.6264 degrees ! Estimated noise=0.597214 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00165938 Jy ! Component: 100 - total flux cleaned = 0.00165939 Jy ! Component: 150 - total flux cleaned = 0.00165693 Jy ! Component: 200 - total flux cleaned = 0.00165584 Jy ! Total flux subtracted in 200 components = 0.00165584 Jy ! Clean residual min=-0.003452 max=0.003000 Jy/beam ! Clean residual mean=-0.000000 rms=0.000831 Jy/beam ! Combined flux in latest and established models = 0.179512 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 47 components and 0.179512 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063693Jy sigma=1.156348 ! Fit after self-cal, rms=0.063685Jy sigma=1.156246 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063685Jy sigma=1.156246 ! Fit after self-cal, rms=0.056729Jy sigma=1.010303 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000319941 Jy ! Component: 100 - total flux cleaned = -3.79485e-05 Jy ! Component: 150 - total flux cleaned = -0.000283897 Jy ! Component: 200 - total flux cleaned = -0.000348767 Jy ! Total flux subtracted in 200 components = -0.000348767 Jy ! Clean residual min=-0.002689 max=0.002674 Jy/beam ! Clean residual mean=-0.000001 rms=0.000696 Jy/beam ! Combined flux in latest and established models = 0.179164 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 51 components and 0.179164 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056467Jy sigma=1.003517 ! Fit after self-cal, rms=0.056118Jy sigma=0.996098 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8574 x 2.092 at 0.6264 degrees (North through East) ! Clean map min=-0.0024493 max=0.15802 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056118Jy sigma=0.996098 ! Fit after self-cal, rms=0.055589Jy sigma=0.977723 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055589Jy sigma=0.977723 ! Fit after self-cal, rms=0.055567Jy sigma=0.977076 ! Inverting map and beam ! Estimated beam: bmin=0.8549 mas, bmaj=2.087 mas, bpa=0.8439 degrees ! Estimated noise=0.593921 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000216811 Jy ! Component: 100 - total flux cleaned = -0.000180408 Jy ! Component: 150 - total flux cleaned = -0.000115137 Jy ! Component: 200 - total flux cleaned = -5.86748e-05 Jy ! Total flux subtracted in 200 components = -5.86748e-05 Jy ! Clean residual min=-0.002328 max=0.002481 Jy/beam ! Clean residual mean=-0.000001 rms=0.000612 Jy/beam ! Combined flux in latest and established models = 0.179105 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 55 components and 0.179105 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055535Jy sigma=0.976289 ! Fit after self-cal, rms=0.055529Jy sigma=0.976167 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055529Jy sigma=0.976167 ! Fit after self-cal, rms=0.054996Jy sigma=0.957513 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054996Jy sigma=0.957513 ! Fit after self-cal, rms=0.055014Jy sigma=0.957448 ! Inverting map and beam ! Estimated beam: bmin=0.8553 mas, bmaj=2.086 mas, bpa=0.9147 degrees ! Estimated noise=0.592977 mJy/beam. ! Added new window around map position (-1.6, 3). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00258529 Jy ! Component: 100 - total flux cleaned = 0.00264972 Jy ! Component: 150 - total flux cleaned = 0.00251976 Jy ! Component: 200 - total flux cleaned = 0.00248417 Jy ! Total flux subtracted in 200 components = 0.00248417 Jy ! Clean residual min=-0.002288 max=0.001877 Jy/beam ! Clean residual mean=-0.000002 rms=0.000560 Jy/beam ! Combined flux in latest and established models = 0.181589 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 76 components and 0.181589 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054933Jy sigma=0.954927 ! Fit after self-cal, rms=0.054937Jy sigma=0.954736 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.161 mas, bmaj=3.613 mas, bpa=4.541 degrees ! Estimated noise=0.769951 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000222437 Jy ! Component: 100 - total flux cleaned = 0.00018028 Jy ! Component: 150 - total flux cleaned = 0.00014576 Jy ! Component: 200 - total flux cleaned = 0.000116428 Jy ! Total flux subtracted in 200 components = 0.000116428 Jy ! Clean residual min=-0.002283 max=0.002627 Jy/beam ! Clean residual mean=-0.000004 rms=0.000740 Jy/beam ! Combined flux in latest and established models = 0.181705 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 89 components and 0.181705 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054936Jy sigma=0.954687 ! Fit after self-cal, rms=0.054936Jy sigma=0.954653 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6881 mas, bmaj=1.809 mas, bpa=0.2275 degrees ! Estimated noise=0.84614 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.134043 Jy ! Component: 100 - total flux cleaned = 0.159015 Jy ! Component: 150 - total flux cleaned = 0.168877 Jy ! Component: 200 - total flux cleaned = 0.174309 Jy ! Total flux subtracted in 200 components = 0.174309 Jy ! Clean residual min=-0.003466 max=0.003237 Jy/beam ! Clean residual mean=-0.000003 rms=0.000845 Jy/beam ! Combined flux in latest and established models = 0.174309 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.174309 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8553 mas, bmaj=2.086 mas, bpa=0.9147 degrees ! Estimated noise=0.592977 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00440043 Jy ! Component: 100 - total flux cleaned = 0.00620217 Jy ! Component: 150 - total flux cleaned = 0.00688337 Jy ! Component: 200 - total flux cleaned = 0.00721623 Jy ! Total flux subtracted in 200 components = 0.00721623 Jy ! Clean residual min=-0.002310 max=0.001872 Jy/beam ! Clean residual mean=-0.000002 rms=0.000553 Jy/beam ! Combined flux in latest and established models = 0.181526 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 53 components and 0.181526 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.161 mas, bmaj=3.613 mas, bpa=4.541 degrees ! Estimated noise=0.769951 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000187803 Jy ! Component: 100 - total flux cleaned = 0.000162286 Jy ! Component: 150 - total flux cleaned = 0.000118802 Jy ! Component: 200 - total flux cleaned = 0.00011785 Jy ! Total flux subtracted in 200 components = 0.00011785 Jy ! Clean residual min=-0.002301 max=0.002565 Jy/beam ! Clean residual mean=-0.000004 rms=0.000740 Jy/beam ! Combined flux in latest and established models = 0.181643 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 66 components and 0.181644 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8553 mas, bmaj=2.086 mas, bpa=0.9147 degrees ! Estimated noise=0.592977 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 7.29512e-05 Jy ! Component: 100 - total flux cleaned = 0.000189458 Jy ! Component: 150 - total flux cleaned = 0.000279885 Jy ! Component: 200 - total flux cleaned = 0.000326771 Jy ! Total flux subtracted in 200 components = 0.000326771 Jy ! Clean residual min=-0.002287 max=0.001805 Jy/beam ! Clean residual mean=-0.000002 rms=0.000546 Jy/beam ! Combined flux in latest and established models = 0.18197 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 82 components and 0.18197 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054907Jy sigma=0.953713 ! Fit after self-cal, rms=0.054905Jy sigma=0.953670 wmodel J1945-0153_X_2005_06_30_yyk\_map.mod ! Writing 82 model components to file: J1945-0153_X_2005_06_30_yyk_map.mod wobs J1945-0153_X_2005_06_30_yyk\_uvs.fits ! Writing UV FITS file: J1945-0153_X_2005_06_30_yyk_uvs.fits wwins J1945-0153_X_2005_06_30_yyk\_map.win ! wwins: Wrote 2 windows to J1945-0153_X_2005_06_30_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00075665 Jy ! Component: 100 - total flux cleaned = -0.00126541 Jy ! Component: 150 - total flux cleaned = -0.00171308 Jy ! Component: 200 - total flux cleaned = -0.00186622 Jy ! Component: 250 - total flux cleaned = -0.002043 Jy ! Component: 300 - total flux cleaned = -0.00215799 Jy ! Component: 350 - total flux cleaned = -0.0022972 Jy ! Component: 400 - total flux cleaned = -0.0024046 Jy ! Component: 450 - total flux cleaned = -0.0024305 Jy ! Component: 500 - total flux cleaned = -0.00248213 Jy ! Component: 550 - total flux cleaned = -0.00260807 Jy ! Component: 600 - total flux cleaned = -0.00273161 Jy ! Component: 650 - total flux cleaned = -0.00282832 Jy ! Component: 700 - total flux cleaned = -0.0029238 Jy ! Component: 750 - total flux cleaned = -0.00313383 Jy ! Component: 800 - total flux cleaned = -0.00331674 Jy ! Component: 850 - total flux cleaned = -0.00345154 Jy ! Component: 900 - total flux cleaned = -0.00365037 Jy ! Component: 950 - total flux cleaned = -0.00382403 Jy ! Component: 1000 - total flux cleaned = -0.00395207 Jy ! Component: 1050 - total flux cleaned = -0.00416219 Jy ! Component: 1100 - total flux cleaned = -0.00422442 Jy ! Component: 1150 - total flux cleaned = -0.00438818 Jy ! Component: 1200 - total flux cleaned = -0.00448899 Jy ! Component: 1250 - total flux cleaned = -0.00462773 Jy ! Component: 1300 - total flux cleaned = -0.00470606 Jy ! Component: 1350 - total flux cleaned = -0.00472598 Jy ! Component: 1400 - total flux cleaned = -0.00487831 Jy ! Component: 1450 - total flux cleaned = -0.00484071 Jy ! Component: 1500 - total flux cleaned = -0.00495228 Jy ! Component: 1550 - total flux cleaned = -0.00497046 Jy ! Component: 1600 - total flux cleaned = -0.00497045 Jy ! Component: 1650 - total flux cleaned = -0.00504178 Jy ! Component: 1700 - total flux cleaned = -0.00511221 Jy ! Component: 1750 - total flux cleaned = -0.00521687 Jy ! Component: 1800 - total flux cleaned = -0.00526874 Jy ! Component: 1850 - total flux cleaned = -0.0054226 Jy ! Component: 1900 - total flux cleaned = -0.00552394 Jy ! Component: 1950 - total flux cleaned = -0.00569113 Jy ! Component: 2000 - total flux cleaned = -0.00577397 Jy ! Total flux subtracted in 2048 components = -0.00588869 Jy ! Clean residual min=-0.001016 max=0.000985 Jy/beam ! Clean residual mean=-0.000001 rms=0.000318 Jy/beam ! Combined flux in latest and established models = 0.176082 Jy keep ! Adding 162 model components to the UV plane model. ! The established model now contains 244 components and 0.176082 Jy ![Exited script file: muppet] wmap "J1945-0153_X_2005_06_30_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8553 x 2.086 at 0.9147 degrees (North through East) ! Clean map min=-0.0018671 max=0.15765 Jy/beam ! Writing clean map to FITS file: J1945-0153_X_2005_06_30_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.157648 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00031784 device "J1945-0153_X_2005_06_30_yyk\_map.eps/VPS" ! Attempting to open device: 'J1945-0153_X_2005_06_30_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.604841 0.604841 1.20968 2.41937 4.83873 9.67746 19.3549 38.7099 77.4197 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.157 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8553 x 2.086 at 0.9147 degrees (North through East) ! Clean map min=-0.0018671 max=0.15765 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1945-0153_X_2005_06_30_yyk\_map.gif/gif" ! Attempting to open device: 'J1945-0153_X_2005_06_30_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1945-0153_X_2005_06_30_yyk_uvs.log closed on Sat Oct 8 17:41:01 2005