! Started logfile: J1941-0511_X_2005_06_01_yyk_uvs.log on Sat Oct 8 17:40:26 2005 obs J1941-0511_X_2005_06_01_yyk_uve.fits ! Reading UV FITS file: J1941-0511_X_2005_06_01_yyk_uve.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.866667 visibilities/baseline/integration-bin. ! Found source: J1941-0511 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1618 lines of history. ! ! Reading 1560 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1941-0511_X_2005_06_01_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.196263 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7977 mas, bmaj=3.241 mas, bpa=-17.38 degrees ! Estimated noise=1.43653 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.142594 Jy ! Component: 100 - total flux cleaned = 0.171552 Jy ! Total flux subtracted in 100 components = 0.171552 Jy ! Clean residual min=-0.013501 max=0.014127 Jy/beam ! Clean residual mean=0.000005 rms=0.003365 Jy/beam ! Combined flux in latest and established models = 0.171552 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.171552 Jy ! ! Correcting IF 1. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.096539Jy sigma=1.763973 ! Fit after self-cal, rms=0.080305Jy sigma=1.384941 ! Inverting map and beam ! Estimated beam: bmin=0.7977 mas, bmaj=3.241 mas, bpa=-17.38 degrees ! Estimated noise=1.43653 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.007 mas, bmaj=3.529 mas, bpa=-15.68 degrees ! Estimated noise=1.09188 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0249115 Jy ! Component: 100 - total flux cleaned = 0.035227 Jy ! Component: 150 - total flux cleaned = 0.0406832 Jy ! Component: 200 - total flux cleaned = 0.043759 Jy ! Total flux subtracted in 200 components = 0.043759 Jy ! Clean residual min=-0.007491 max=0.013426 Jy/beam ! Clean residual mean=0.000022 rms=0.002860 Jy/beam ! Combined flux in latest and established models = 0.215311 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 50 model components to the UV plane model. ! The established model now contains 56 components and 0.215311 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075063Jy sigma=1.267902 ! Fit after self-cal, rms=0.075033Jy sigma=1.267410 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.007 x 3.529 at -15.68 degrees (North through East) ! Clean map min=-0.0072781 max=0.1789 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.03237 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.01 HN 1.02 KP 0.86 ! LA 0.91 MK 0.99 NL 0.97 OV 1.01 ! PT 0.97 SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.01173 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.07 HN 0.94 KP 0.86 ! LA 0.97 MK 1.01 NL 0.92 OV 1.08 ! PT 1.00 SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.98046 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.14 HN 0.97 KP 1.01 ! LA 0.94 MK 0.95 NL 1.01 OV 1.08 ! PT 1.05 SC 1.00* ! ! ! Fit before self-cal, rms=0.075033Jy sigma=1.267410 ! Fit after self-cal, rms=0.073369Jy sigma=1.239164 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073369Jy sigma=1.239164 ! Fit after self-cal, rms=0.073367Jy sigma=1.239130 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.001 mas, bmaj=3.582 mas, bpa=-15.85 degrees ! Estimated noise=1.09593 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00139279 Jy ! Component: 100 - total flux cleaned = 0.0013881 Jy ! Component: 150 - total flux cleaned = 0.00144765 Jy ! Component: 200 - total flux cleaned = 0.00149737 Jy ! Total flux subtracted in 200 components = 0.00149737 Jy ! Clean residual min=-0.007487 max=0.011599 Jy/beam ! Clean residual mean=0.000019 rms=0.002544 Jy/beam ! Combined flux in latest and established models = 0.216808 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 67 components and 0.216808 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073243Jy sigma=1.237164 ! Fit after self-cal, rms=0.073260Jy sigma=1.237124 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073260Jy sigma=1.237124 ! Fit after self-cal, rms=0.062085Jy sigma=1.052247 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.4, 4). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0143627 Jy ! Component: 100 - total flux cleaned = 0.021607 Jy ! Component: 150 - total flux cleaned = 0.026327 Jy ! Component: 200 - total flux cleaned = 0.0297555 Jy ! Total flux subtracted in 200 components = 0.0297555 Jy ! Clean residual min=-0.005377 max=0.006170 Jy/beam ! Clean residual mean=-0.000005 rms=0.001515 Jy/beam ! Combined flux in latest and established models = 0.246564 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 40 model components to the UV plane model. ! The established model now contains 106 components and 0.246563 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060144Jy sigma=0.996712 ! Fit after self-cal, rms=0.059244Jy sigma=0.981353 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.001 x 3.582 at -15.85 degrees (North through East) ! Clean map min=-0.0049633 max=0.18388 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059244Jy sigma=0.981353 ! Fit after self-cal, rms=0.057953Jy sigma=0.955210 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057953Jy sigma=0.955210 ! Fit after self-cal, rms=0.057902Jy sigma=0.954427 ! Inverting map and beam ! Estimated beam: bmin=0.9891 mas, bmaj=3.587 mas, bpa=-16.04 degrees ! Estimated noise=1.07818 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00506964 Jy ! Component: 100 - total flux cleaned = 0.00701971 Jy ! Component: 150 - total flux cleaned = 0.00824094 Jy ! Component: 200 - total flux cleaned = 0.00908915 Jy ! Total flux subtracted in 200 components = 0.00908915 Jy ! Clean residual min=-0.004368 max=0.004193 Jy/beam ! Clean residual mean=-0.000006 rms=0.001127 Jy/beam ! Combined flux in latest and established models = 0.255653 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 53 model components to the UV plane model. ! The established model now contains 147 components and 0.255653 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057587Jy sigma=0.944341 ! Fit after self-cal, rms=0.057559Jy sigma=0.943449 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057559Jy sigma=0.943449 ! Fit after self-cal, rms=0.057241Jy sigma=0.926545 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057241Jy sigma=0.926545 ! Fit after self-cal, rms=0.057252Jy sigma=0.926492 ! Inverting map and beam ! Estimated beam: bmin=0.9862 mas, bmaj=3.6 mas, bpa=-16.06 degrees ! Estimated noise=1.07734 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00250975 Jy ! Component: 100 - total flux cleaned = 0.00362816 Jy ! Component: 150 - total flux cleaned = 0.00466552 Jy ! Component: 200 - total flux cleaned = 0.00544962 Jy ! Total flux subtracted in 200 components = 0.00544962 Jy ! Clean residual min=-0.004013 max=0.003540 Jy/beam ! Clean residual mean=-0.000005 rms=0.001036 Jy/beam ! Combined flux in latest and established models = 0.261102 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 34 model components to the UV plane model. ! The established model now contains 168 components and 0.261102 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057109Jy sigma=0.922484 ! Fit after self-cal, rms=0.057111Jy sigma=0.922242 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.207 mas, bmaj=4.12 mas, bpa=-2.563 degrees ! Estimated noise=1.27917 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00240143 Jy ! Component: 100 - total flux cleaned = 0.00361659 Jy ! Component: 150 - total flux cleaned = 0.00420985 Jy ! Component: 200 - total flux cleaned = 0.00472941 Jy ! Total flux subtracted in 200 components = 0.00472941 Jy ! Clean residual min=-0.004209 max=0.003587 Jy/beam ! Clean residual mean=-0.000011 rms=0.001187 Jy/beam ! Combined flux in latest and established models = 0.265832 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 183 components and 0.265832 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057113Jy sigma=0.921297 ! Fit after self-cal, rms=0.057101Jy sigma=0.921169 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7907 mas, bmaj=3.279 mas, bpa=-17.44 degrees ! Estimated noise=1.41357 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.150975 Jy ! Component: 100 - total flux cleaned = 0.180339 Jy ! Component: 150 - total flux cleaned = 0.195423 Jy ! Component: 200 - total flux cleaned = 0.206028 Jy ! Total flux subtracted in 200 components = 0.206028 Jy ! Clean residual min=-0.006050 max=0.006154 Jy/beam ! Clean residual mean=0.000006 rms=0.001555 Jy/beam ! Combined flux in latest and established models = 0.206028 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.206028 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9862 mas, bmaj=3.6 mas, bpa=-16.06 degrees ! Estimated noise=1.07734 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0144158 Jy ! Component: 100 - total flux cleaned = 0.0241392 Jy ! Component: 150 - total flux cleaned = 0.0312013 Jy ! Component: 200 - total flux cleaned = 0.0365628 Jy ! Total flux subtracted in 200 components = 0.0365628 Jy ! Clean residual min=-0.004391 max=0.004157 Jy/beam ! Clean residual mean=0.000005 rms=0.001362 Jy/beam ! Combined flux in latest and established models = 0.242591 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 84 components and 0.242591 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.207 mas, bmaj=4.12 mas, bpa=-2.563 degrees ! Estimated noise=1.27917 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00683498 Jy ! Component: 100 - total flux cleaned = 0.0115626 Jy ! Component: 150 - total flux cleaned = 0.0150014 Jy ! Component: 200 - total flux cleaned = 0.017546 Jy ! Total flux subtracted in 200 components = 0.017546 Jy ! Clean residual min=-0.004305 max=0.003573 Jy/beam ! Clean residual mean=-0.000005 rms=0.001290 Jy/beam ! Combined flux in latest and established models = 0.260137 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 117 components and 0.260137 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9862 mas, bmaj=3.6 mas, bpa=-16.06 degrees ! Estimated noise=1.07734 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00191254 Jy ! Component: 100 - total flux cleaned = 0.00267293 Jy ! Component: 150 - total flux cleaned = 0.00340296 Jy ! Component: 200 - total flux cleaned = 0.00383598 Jy ! Total flux subtracted in 200 components = 0.00383598 Jy ! Clean residual min=-0.003685 max=0.003350 Jy/beam ! Clean residual mean=-0.000007 rms=0.000998 Jy/beam ! Combined flux in latest and established models = 0.263973 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 138 components and 0.263973 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057187Jy sigma=0.922298 ! Fit after self-cal, rms=0.057158Jy sigma=0.922003 wmodel J1941-0511_X_2005_06_01_yyk\_map.mod ! Writing 138 model components to file: J1941-0511_X_2005_06_01_yyk_map.mod wobs J1941-0511_X_2005_06_01_yyk\_uvs.fits ! Writing UV FITS file: J1941-0511_X_2005_06_01_yyk_uvs.fits wwins J1941-0511_X_2005_06_01_yyk\_map.win ! wwins: Wrote 2 windows to J1941-0511_X_2005_06_01_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00131579 Jy ! Component: 100 - total flux cleaned = -0.00197272 Jy ! Component: 150 - total flux cleaned = -0.00242355 Jy ! Component: 200 - total flux cleaned = -0.00253123 Jy ! Component: 250 - total flux cleaned = -0.00253065 Jy ! Component: 300 - total flux cleaned = -0.00247956 Jy ! Component: 350 - total flux cleaned = -0.00243258 Jy ! Component: 400 - total flux cleaned = -0.00248014 Jy ! Component: 450 - total flux cleaned = -0.00265866 Jy ! Component: 500 - total flux cleaned = -0.00270192 Jy ! Component: 550 - total flux cleaned = -0.00253371 Jy ! Component: 600 - total flux cleaned = -0.00249385 Jy ! Component: 650 - total flux cleaned = -0.00237432 Jy ! Component: 700 - total flux cleaned = -0.00237475 Jy ! Component: 750 - total flux cleaned = -0.00218247 Jy ! Component: 800 - total flux cleaned = -0.00225842 Jy ! Component: 850 - total flux cleaned = -0.00233208 Jy ! Component: 900 - total flux cleaned = -0.00247588 Jy ! Component: 950 - total flux cleaned = -0.00251106 Jy ! Component: 1000 - total flux cleaned = -0.00258002 Jy ! Component: 1050 - total flux cleaned = -0.00261394 Jy ! Component: 1100 - total flux cleaned = -0.00268112 Jy ! Component: 1150 - total flux cleaned = -0.00281286 Jy ! Component: 1200 - total flux cleaned = -0.00291015 Jy ! Component: 1250 - total flux cleaned = -0.00310157 Jy ! Component: 1300 - total flux cleaned = -0.00325874 Jy ! Component: 1350 - total flux cleaned = -0.00347543 Jy ! Component: 1400 - total flux cleaned = -0.00359751 Jy ! Component: 1450 - total flux cleaned = -0.00368782 Jy ! Component: 1500 - total flux cleaned = -0.00383608 Jy ! Component: 1550 - total flux cleaned = -0.00395272 Jy ! Component: 1600 - total flux cleaned = -0.00412522 Jy ! Component: 1650 - total flux cleaned = -0.00421 Jy ! Component: 1700 - total flux cleaned = -0.00440661 Jy ! Component: 1750 - total flux cleaned = -0.00451737 Jy ! Component: 1800 - total flux cleaned = -0.00470919 Jy ! Component: 1850 - total flux cleaned = -0.00487154 Jy ! Component: 1900 - total flux cleaned = -0.00500535 Jy ! Component: 1950 - total flux cleaned = -0.00513706 Jy ! Component: 2000 - total flux cleaned = -0.00524164 Jy ! Total flux subtracted in 2048 components = -0.00531964 Jy ! Clean residual min=-0.001803 max=0.001371 Jy/beam ! Clean residual mean=-0.000006 rms=0.000519 Jy/beam ! Combined flux in latest and established models = 0.258653 Jy keep ! Adding 135 model components to the UV plane model. ! The established model now contains 273 components and 0.258653 Jy ![Exited script file: muppet] wmap "J1941-0511_X_2005_06_01_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9862 x 3.6 at -16.06 degrees (North through East) ! Clean map min=-0.0025334 max=0.18185 Jy/beam ! Writing clean map to FITS file: J1941-0511_X_2005_06_01_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.181848 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000517621 device "J1941-0511_X_2005_06_01_yyk\_map.eps/VPS" ! Attempting to open device: 'J1941-0511_X_2005_06_01_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.853936 0.853936 1.70787 3.41575 6.83149 13.663 27.326 54.6519 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.181 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9862 x 3.6 at -16.06 degrees (North through East) ! Clean map min=-0.0025334 max=0.18185 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1941-0511_X_2005_06_01_yyk\_map.gif/gif" ! Attempting to open device: 'J1941-0511_X_2005_06_01_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1941-0511_X_2005_06_01_yyk_uvs.log closed on Sat Oct 8 17:40:30 2005