! Started logfile: J1916-1519_X_2005_05_12_yyk_uvs.log on Sat Oct 8 17:38:42 2005 obs J1916-1519_X_2005_05_12_yyk_uve.fits ! Reading UV FITS file: J1916-1519_X_2005_05_12_yyk_uve.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.976389 visibilities/baseline/integration-bin. ! Found source: J1916-1519 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1439 lines of history. ! ! Reading 2812 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1916-1519_X_2005_05_12_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.199704 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6983 mas, bmaj=1.823 mas, bpa=-3.433 degrees ! Estimated noise=1.19205 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.157017 Jy ! Component: 100 - total flux cleaned = 0.180229 Jy ! Total flux subtracted in 100 components = 0.180229 Jy ! Clean residual min=-0.005508 max=0.006772 Jy/beam ! Clean residual mean=0.000000 rms=0.001540 Jy/beam ! Combined flux in latest and established models = 0.180229 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.180229 Jy ! ! Correcting IF 1. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.078654Jy sigma=1.102916 ! Fit after self-cal, rms=0.078557Jy sigma=1.099767 ! Inverting map and beam ! Estimated beam: bmin=0.6983 mas, bmaj=1.823 mas, bpa=-3.433 degrees ! Estimated noise=1.19205 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9209 mas, bmaj=2.292 mas, bpa=-2.188 degrees ! Estimated noise=0.740074 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101944 Jy ! Component: 100 - total flux cleaned = 0.0131617 Jy ! Component: 150 - total flux cleaned = 0.0137837 Jy ! Component: 200 - total flux cleaned = 0.0138885 Jy ! Total flux subtracted in 200 components = 0.0138885 Jy ! Clean residual min=-0.003939 max=0.005220 Jy/beam ! Clean residual mean=0.000007 rms=0.001143 Jy/beam ! Combined flux in latest and established models = 0.194117 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 24 components and 0.194117 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078137Jy sigma=1.079426 ! Fit after self-cal, rms=0.078137Jy sigma=1.079272 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9209 x 2.292 at -2.188 degrees (North through East) ! Clean map min=-0.0036939 max=0.18623 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00019 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.96 HN 1.14 KP 0.96 ! LA 1.03 MK 0.97 NL 1.01 OV 1.01 ! PT 0.94 SC 1.02 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.0085 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.97 HN 1.12 KP 0.92 ! LA 1.03 MK 1.00 NL 0.95 OV 0.97 ! PT 1.00 SC 0.97 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.990644 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.99 HN 1.11 KP 0.86 ! LA 1.01 MK 1.05 NL 1.01 OV 0.98 ! PT 1.03 SC 1.03 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.961854 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.02 HN 1.15 KP 1.02 ! LA 0.96 MK 1.04 NL 1.01 OV 1.08 ! PT 1.08 SC 1.00* ! ! ! Fit before self-cal, rms=0.078137Jy sigma=1.079272 ! Fit after self-cal, rms=0.077892Jy sigma=1.054343 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077892Jy sigma=1.054343 ! Fit after self-cal, rms=0.077898Jy sigma=1.054329 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9389 mas, bmaj=2.31 mas, bpa=-1.98 degrees ! Estimated noise=0.729922 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00337271 Jy ! Component: 100 - total flux cleaned = -0.00435775 Jy ! Component: 150 - total flux cleaned = -0.0045694 Jy ! Component: 200 - total flux cleaned = -0.00477712 Jy ! Total flux subtracted in 200 components = -0.00477712 Jy ! Clean residual min=-0.003543 max=0.003388 Jy/beam ! Clean residual mean=0.000029 rms=0.000846 Jy/beam ! Combined flux in latest and established models = 0.18934 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 35 components and 0.18934 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077695Jy sigma=1.051637 ! Fit after self-cal, rms=0.077694Jy sigma=1.051543 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077694Jy sigma=1.051543 ! Fit after self-cal, rms=0.075378Jy sigma=1.009574 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000489297 Jy ! Component: 100 - total flux cleaned = 0.000458097 Jy ! Component: 150 - total flux cleaned = 0.000456545 Jy ! Component: 200 - total flux cleaned = 0.000405238 Jy ! Total flux subtracted in 200 components = 0.000405238 Jy ! Clean residual min=-0.003381 max=0.003312 Jy/beam ! Clean residual mean=0.000027 rms=0.000836 Jy/beam ! Combined flux in latest and established models = 0.189745 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 39 components and 0.189745 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075371Jy sigma=1.009045 ! Fit after self-cal, rms=0.075335Jy sigma=1.005779 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9389 x 2.31 at -1.98 degrees (North through East) ! Clean map min=-0.0031249 max=0.18675 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075335Jy sigma=1.005779 ! Fit after self-cal, rms=0.073782Jy sigma=0.992957 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073782Jy sigma=0.992957 ! Fit after self-cal, rms=0.073846Jy sigma=0.992526 ! Inverting map and beam ! Estimated beam: bmin=0.9298 mas, bmaj=2.306 mas, bpa=-1.91 degrees ! Estimated noise=0.721561 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00108763 Jy ! Component: 100 - total flux cleaned = -0.0010214 Jy ! Component: 150 - total flux cleaned = -0.000967708 Jy ! Component: 200 - total flux cleaned = -0.000965862 Jy ! Total flux subtracted in 200 components = -0.000965862 Jy ! Clean residual min=-0.003042 max=0.002752 Jy/beam ! Clean residual mean=0.000021 rms=0.000766 Jy/beam ! Combined flux in latest and established models = 0.188779 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 45 components and 0.188779 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073782Jy sigma=0.991719 ! Fit after self-cal, rms=0.073817Jy sigma=0.991629 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073817Jy sigma=0.991629 ! Fit after self-cal, rms=0.074036Jy sigma=0.976643 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074036Jy sigma=0.976643 ! Fit after self-cal, rms=0.074062Jy sigma=0.976565 ! Inverting map and beam ! Estimated beam: bmin=0.9261 mas, bmaj=2.3 mas, bpa=-2.069 degrees ! Estimated noise=0.719379 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000202216 Jy ! Component: 100 - total flux cleaned = 0.000280238 Jy ! Component: 150 - total flux cleaned = 0.00038356 Jy ! Component: 200 - total flux cleaned = 0.00046791 Jy ! Total flux subtracted in 200 components = 0.00046791 Jy ! Clean residual min=-0.002862 max=0.002562 Jy/beam ! Clean residual mean=0.000008 rms=0.000727 Jy/beam ! Combined flux in latest and established models = 0.189247 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 48 components and 0.189247 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074067Jy sigma=0.976166 ! Fit after self-cal, rms=0.074080Jy sigma=0.976125 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.355 mas, bmaj=4.776 mas, bpa=9.598 degrees ! Estimated noise=0.897299 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000402553 Jy ! Component: 100 - total flux cleaned = 0.000403101 Jy ! Component: 150 - total flux cleaned = 0.000403699 Jy ! Component: 200 - total flux cleaned = 0.000388882 Jy ! Total flux subtracted in 200 components = 0.000388882 Jy ! Clean residual min=-0.002930 max=0.002826 Jy/beam ! Clean residual mean=0.000015 rms=0.000945 Jy/beam ! Combined flux in latest and established models = 0.189636 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 49 components and 0.189636 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074092Jy sigma=0.976113 ! Fit after self-cal, rms=0.074093Jy sigma=0.976055 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6999 mas, bmaj=1.823 mas, bpa=-3.387 degrees ! Estimated noise=1.16703 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.154334 Jy ! Component: 100 - total flux cleaned = 0.177318 Jy ! Component: 150 - total flux cleaned = 0.184563 Jy ! Component: 200 - total flux cleaned = 0.186589 Jy ! Total flux subtracted in 200 components = 0.186589 Jy ! Clean residual min=-0.004340 max=0.005145 Jy/beam ! Clean residual mean=0.000002 rms=0.001182 Jy/beam ! Combined flux in latest and established models = 0.186589 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.186589 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9261 mas, bmaj=2.3 mas, bpa=-2.069 degrees ! Estimated noise=0.719379 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00323739 Jy ! Component: 100 - total flux cleaned = 0.00330426 Jy ! Component: 150 - total flux cleaned = 0.0032613 Jy ! Component: 200 - total flux cleaned = 0.00322722 Jy ! Total flux subtracted in 200 components = 0.00322722 Jy ! Clean residual min=-0.002781 max=0.002479 Jy/beam ! Clean residual mean=0.000008 rms=0.000728 Jy/beam ! Combined flux in latest and established models = 0.189816 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 31 components and 0.189816 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.355 mas, bmaj=4.776 mas, bpa=9.598 degrees ! Estimated noise=0.897299 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000231124 Jy ! Component: 100 - total flux cleaned = 0.000226801 Jy ! Component: 150 - total flux cleaned = 0.000225481 Jy ! Component: 200 - total flux cleaned = 0.000224686 Jy ! Total flux subtracted in 200 components = 0.000224686 Jy ! Clean residual min=-0.003025 max=0.002717 Jy/beam ! Clean residual mean=0.000014 rms=0.000935 Jy/beam ! Combined flux in latest and established models = 0.190041 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 38 components and 0.190041 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9261 mas, bmaj=2.3 mas, bpa=-2.069 degrees ! Estimated noise=0.719379 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.78847e-05 Jy ! Component: 100 - total flux cleaned = -0.000112145 Jy ! Component: 150 - total flux cleaned = -0.000176076 Jy ! Component: 200 - total flux cleaned = -0.000210524 Jy ! Total flux subtracted in 200 components = -0.000210524 Jy ! Clean residual min=-0.002751 max=0.002541 Jy/beam ! Clean residual mean=0.000008 rms=0.000719 Jy/beam ! Combined flux in latest and established models = 0.18983 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 48 components and 0.18983 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074124Jy sigma=0.975961 ! Fit after self-cal, rms=0.074123Jy sigma=0.975951 wmodel J1916-1519_X_2005_05_12_yyk\_map.mod ! Writing 48 model components to file: J1916-1519_X_2005_05_12_yyk_map.mod wobs J1916-1519_X_2005_05_12_yyk\_uvs.fits ! Writing UV FITS file: J1916-1519_X_2005_05_12_yyk_uvs.fits wwins J1916-1519_X_2005_05_12_yyk\_map.win ! wwins: Wrote 1 windows to J1916-1519_X_2005_05_12_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000554711 Jy ! Component: 100 - total flux cleaned = -0.000822919 Jy ! Component: 150 - total flux cleaned = -0.000783774 Jy ! Component: 200 - total flux cleaned = -0.000783261 Jy ! Component: 250 - total flux cleaned = -0.000744402 Jy ! Component: 300 - total flux cleaned = -0.000817299 Jy ! Component: 350 - total flux cleaned = -0.000923706 Jy ! Component: 400 - total flux cleaned = -0.00109643 Jy ! Component: 450 - total flux cleaned = -0.0012642 Jy ! Component: 500 - total flux cleaned = -0.00145993 Jy ! Component: 550 - total flux cleaned = -0.00146004 Jy ! Component: 600 - total flux cleaned = -0.00155403 Jy ! Component: 650 - total flux cleaned = -0.00155342 Jy ! Component: 700 - total flux cleaned = -0.00170265 Jy ! Component: 750 - total flux cleaned = -0.00170325 Jy ! Component: 800 - total flux cleaned = -0.0018186 Jy ! Component: 850 - total flux cleaned = -0.00184654 Jy ! Component: 900 - total flux cleaned = -0.00187412 Jy ! Component: 950 - total flux cleaned = -0.0018191 Jy ! Component: 1000 - total flux cleaned = -0.00171165 Jy ! Component: 1050 - total flux cleaned = -0.00157946 Jy ! Component: 1100 - total flux cleaned = -0.00155297 Jy ! Component: 1150 - total flux cleaned = -0.00137304 Jy ! Component: 1200 - total flux cleaned = -0.00129733 Jy ! Component: 1250 - total flux cleaned = -0.00134723 Jy ! Component: 1300 - total flux cleaned = -0.00122346 Jy ! Component: 1350 - total flux cleaned = -0.00107709 Jy ! Component: 1400 - total flux cleaned = -0.000884729 Jy ! Component: 1450 - total flux cleaned = -0.00088522 Jy ! Component: 1500 - total flux cleaned = -0.000696943 Jy ! Component: 1550 - total flux cleaned = -0.000603971 Jy ! Component: 1600 - total flux cleaned = -0.000488759 Jy ! Component: 1650 - total flux cleaned = -0.000352668 Jy ! Component: 1700 - total flux cleaned = -0.00028555 Jy ! Component: 1750 - total flux cleaned = -0.000152273 Jy ! Component: 1800 - total flux cleaned = -8.64992e-05 Jy ! Component: 1850 - total flux cleaned = 6.58412e-05 Jy ! Component: 1900 - total flux cleaned = 0.000130166 Jy ! Component: 1950 - total flux cleaned = 0.000237174 Jy ! Component: 2000 - total flux cleaned = 0.000363951 Jy ! Total flux subtracted in 2048 components = 0.000510475 Jy ! Clean residual min=-0.001178 max=0.001130 Jy/beam ! Clean residual mean=0.000010 rms=0.000402 Jy/beam ! Combined flux in latest and established models = 0.190341 Jy keep ! Adding 144 model components to the UV plane model. ! The established model now contains 192 components and 0.190341 Jy ![Exited script file: muppet] wmap "J1916-1519_X_2005_05_12_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9261 x 2.3 at -2.069 degrees (North through East) ! Clean map min=-0.0017294 max=0.18243 Jy/beam ! Writing clean map to FITS file: J1916-1519_X_2005_05_12_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.182429 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000401052 device "J1916-1519_X_2005_05_12_yyk\_map.eps/VPS" ! Attempting to open device: 'J1916-1519_X_2005_05_12_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.659522 0.659522 1.31904 2.63809 5.27617 10.5523 21.1047 42.2094 84.4188 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.182 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9261 x 2.3 at -2.069 degrees (North through East) ! Clean map min=-0.0017294 max=0.18243 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1916-1519_X_2005_05_12_yyk\_map.gif/gif" ! Attempting to open device: 'J1916-1519_X_2005_05_12_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1916-1519_X_2005_05_12_yyk_uvs.log closed on Sat Oct 8 17:38:47 2005