! Started logfile: J1826-2924_S_2005_05_12_yyk_uvs.log on Sat Oct 8 17:35:26 2005 obs J1826-2924_S_2005_05_12_yyk_uve.fits ! Reading UV FITS file: J1826-2924_S_2005_05_12_yyk_uve.fits ! AN table 1: 18 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.887654 visibilities/baseline/integration-bin. ! Found source: J1826-2924 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1443 lines of history. ! ! Reading 2876 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1826-2924_S_2005_05_12_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.276239 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.505 mas, bmaj=7.814 mas, bpa=10.29 degrees ! Estimated noise=1.53928 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.198859 Jy ! Component: 100 - total flux cleaned = 0.259158 Jy ! Total flux subtracted in 100 components = 0.259158 Jy ! Clean residual min=-0.008713 max=0.019346 Jy/beam ! Clean residual mean=0.000009 rms=0.003071 Jy/beam ! Combined flux in latest and established models = 0.259158 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.259158 Jy ! ! Correcting IF 1. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.090858Jy sigma=1.326326 ! Fit after self-cal, rms=0.090819Jy sigma=1.323465 ! Inverting map and beam ! Estimated beam: bmin=2.505 mas, bmaj=7.814 mas, bpa=10.29 degrees ! Estimated noise=1.53928 mJy/beam. ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0273287 Jy ! Component: 100 - total flux cleaned = 0.0410423 Jy ! Total flux subtracted in 100 components = 0.0410423 Jy ! Clean residual min=-0.006566 max=0.006763 Jy/beam ! Clean residual mean=-0.000014 rms=0.001779 Jy/beam ! Combined flux in latest and established models = 0.3002 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 48 model components to the UV plane model. ! The established model now contains 69 components and 0.3002 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080570Jy sigma=1.141518 ! Fit after self-cal, rms=0.080569Jy sigma=1.141458 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.541 mas, bmaj=10.35 mas, bpa=7.125 degrees ! Estimated noise=0.867937 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0107773 Jy ! Component: 100 - total flux cleaned = 0.0148622 Jy ! Component: 150 - total flux cleaned = 0.0164977 Jy ! Component: 200 - total flux cleaned = 0.0168639 Jy ! Total flux subtracted in 200 components = 0.0168639 Jy ! Clean residual min=-0.004833 max=0.006029 Jy/beam ! Clean residual mean=-0.000111 rms=0.001647 Jy/beam ! Combined flux in latest and established models = 0.317064 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 41 model components to the UV plane model. ! The established model now contains 101 components and 0.317064 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079088Jy sigma=1.124280 ! Fit after self-cal, rms=0.079088Jy sigma=1.124274 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.541 x 10.35 at 7.125 degrees (North through East) ! Clean map min=-0.0047404 max=0.23892 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01351 ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.99 HN 1.03 KP 0.92 ! LA 1.03 MK 0.99 NL 1.01 OV 0.97 ! PT 1.05 SC 0.97 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.970492 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.06 HN 1.14 KP 1.02 ! LA 0.98 MK 1.07 NL 1.03 OV 0.98 ! PT 0.99 SC 0.99 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.967968 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.21 HN 1.14 KP 0.95 ! LA 0.95 MK 1.04 NL 1.03 OV 1.01 ! PT 1.06 SC 0.98 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.03322 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.04 HN 0.99 KP 0.88 ! LA 1.08 MK 0.98 NL 0.97 OV 0.82 ! PT 0.89 SC 1.04 ! ! ! Fit before self-cal, rms=0.079088Jy sigma=1.124274 ! Fit after self-cal, rms=0.073820Jy sigma=1.049057 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073820Jy sigma=1.049057 ! Fit after self-cal, rms=0.073815Jy sigma=1.049015 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.562 mas, bmaj=10.36 mas, bpa=7.607 degrees ! Estimated noise=0.860309 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00235905 Jy ! Component: 100 - total flux cleaned = -0.00301997 Jy ! Component: 150 - total flux cleaned = -0.00304355 Jy ! Component: 200 - total flux cleaned = -0.00308681 Jy ! Total flux subtracted in 200 components = -0.00308681 Jy ! Clean residual min=-0.002722 max=0.003423 Jy/beam ! Clean residual mean=-0.000065 rms=0.000796 Jy/beam ! Combined flux in latest and established models = 0.313977 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 113 components and 0.313977 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073798Jy sigma=1.048037 ! Fit after self-cal, rms=0.073797Jy sigma=1.048032 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073797Jy sigma=1.048032 ! Fit after self-cal, rms=0.071257Jy sigma=1.004155 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000552564 Jy ! Component: 100 - total flux cleaned = 0.000550118 Jy ! Component: 150 - total flux cleaned = 0.00055008 Jy ! Component: 200 - total flux cleaned = 0.000551398 Jy ! Total flux subtracted in 200 components = 0.000551398 Jy ! Clean residual min=-0.002709 max=0.003269 Jy/beam ! Clean residual mean=-0.000059 rms=0.000766 Jy/beam ! Combined flux in latest and established models = 0.314528 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 119 components and 0.314528 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071238Jy sigma=1.003953 ! Fit after self-cal, rms=0.071111Jy sigma=1.001227 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.562 x 10.36 at 7.607 degrees (North through East) ! Clean map min=-0.0025967 max=0.2401 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071111Jy sigma=1.001227 ! Fit after self-cal, rms=0.069778Jy sigma=0.964100 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069778Jy sigma=0.964100 ! Fit after self-cal, rms=0.069787Jy sigma=0.963764 ! Inverting map and beam ! Estimated beam: bmin=3.566 mas, bmaj=10.37 mas, bpa=7.81 degrees ! Estimated noise=0.858911 mJy/beam. ! Added new window around map position (-20, -16). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00159892 Jy ! Component: 100 - total flux cleaned = 0.00170083 Jy ! Component: 150 - total flux cleaned = 0.00147009 Jy ! Component: 200 - total flux cleaned = 0.00161278 Jy ! Total flux subtracted in 200 components = 0.00161278 Jy ! Clean residual min=-0.002501 max=0.002324 Jy/beam ! Clean residual mean=-0.000065 rms=0.000682 Jy/beam ! Combined flux in latest and established models = 0.316141 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 140 components and 0.316141 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069627Jy sigma=0.960469 ! Fit after self-cal, rms=0.069624Jy sigma=0.960266 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069624Jy sigma=0.960266 ! Fit after self-cal, rms=0.066352Jy sigma=0.920861 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066352Jy sigma=0.920861 ! Fit after self-cal, rms=0.066369Jy sigma=0.920818 ! Inverting map and beam ! Estimated beam: bmin=3.561 mas, bmaj=10.35 mas, bpa=7.845 degrees ! Estimated noise=0.859461 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0006922 Jy ! Component: 100 - total flux cleaned = 0.000955831 Jy ! Component: 150 - total flux cleaned = 0.00110812 Jy ! Component: 200 - total flux cleaned = 0.00121332 Jy ! Total flux subtracted in 200 components = 0.00121332 Jy ! Clean residual min=-0.002427 max=0.002163 Jy/beam ! Clean residual mean=-0.000033 rms=0.000665 Jy/beam ! Combined flux in latest and established models = 0.317354 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 154 components and 0.317354 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066337Jy sigma=0.920100 ! Fit after self-cal, rms=0.066347Jy sigma=0.920085 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.895 mas, bmaj=24.89 mas, bpa=7.478 degrees ! Estimated noise=1.03492 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00075639 Jy ! Component: 100 - total flux cleaned = 0.000782454 Jy ! Component: 150 - total flux cleaned = 0.000828562 Jy ! Component: 200 - total flux cleaned = 0.000809433 Jy ! Total flux subtracted in 200 components = 0.000809433 Jy ! Clean residual min=-0.002271 max=0.002170 Jy/beam ! Clean residual mean=-0.000067 rms=0.000725 Jy/beam ! Combined flux in latest and established models = 0.318164 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 175 components and 0.318164 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066344Jy sigma=0.920056 ! Fit after self-cal, rms=0.066351Jy sigma=0.920039 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.514 mas, bmaj=7.811 mas, bpa=10.67 degrees ! Estimated noise=1.5225 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.196433 Jy ! Component: 100 - total flux cleaned = 0.256196 Jy ! Component: 150 - total flux cleaned = 0.283352 Jy ! Component: 200 - total flux cleaned = 0.296445 Jy ! Total flux subtracted in 200 components = 0.296445 Jy ! Clean residual min=-0.006036 max=0.005239 Jy/beam ! Clean residual mean=0.000009 rms=0.001330 Jy/beam ! Combined flux in latest and established models = 0.296445 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 40 model components to the UV plane model. ! The established model now contains 40 components and 0.296445 Jy ! Inverting map and beam ! Estimated beam: bmin=3.561 mas, bmaj=10.35 mas, bpa=7.845 degrees ! Estimated noise=0.859461 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0120767 Jy ! Component: 100 - total flux cleaned = 0.0163156 Jy ! Component: 150 - total flux cleaned = 0.0177989 Jy ! Component: 200 - total flux cleaned = 0.0187607 Jy ! Total flux subtracted in 200 components = 0.0187607 Jy ! Clean residual min=-0.002548 max=0.002146 Jy/beam ! Clean residual mean=-0.000026 rms=0.000704 Jy/beam ! Combined flux in latest and established models = 0.315205 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 87 components and 0.315205 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.895 mas, bmaj=24.89 mas, bpa=7.478 degrees ! Estimated noise=1.03492 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00208652 Jy ! Component: 100 - total flux cleaned = 0.00228411 Jy ! Component: 150 - total flux cleaned = 0.00240095 Jy ! Component: 200 - total flux cleaned = 0.00246626 Jy ! Total flux subtracted in 200 components = 0.00246626 Jy ! Clean residual min=-0.002306 max=0.002051 Jy/beam ! Clean residual mean=-0.000064 rms=0.000718 Jy/beam ! Combined flux in latest and established models = 0.317672 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 109 components and 0.317672 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.561 mas, bmaj=10.35 mas, bpa=7.845 degrees ! Estimated noise=0.859461 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000333275 Jy ! Component: 100 - total flux cleaned = -0.000372746 Jy ! Component: 150 - total flux cleaned = -0.000411534 Jy ! Component: 200 - total flux cleaned = -0.000447195 Jy ! Total flux subtracted in 200 components = -0.000447195 Jy ! Clean residual min=-0.002394 max=0.001987 Jy/beam ! Clean residual mean=-0.000034 rms=0.000657 Jy/beam ! Combined flux in latest and established models = 0.317225 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 130 components and 0.317225 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066404Jy sigma=0.920279 ! Fit after self-cal, rms=0.066395Jy sigma=0.920208 wmodel J1826-2924_S_2005_05_12_yyk\_map.mod ! Writing 130 model components to file: J1826-2924_S_2005_05_12_yyk_map.mod wobs J1826-2924_S_2005_05_12_yyk\_uvs.fits ! Writing UV FITS file: J1826-2924_S_2005_05_12_yyk_uvs.fits wwins J1826-2924_S_2005_05_12_yyk\_map.win ! wwins: Wrote 2 windows to J1826-2924_S_2005_05_12_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00100666 Jy ! Component: 100 - total flux cleaned = -0.00157493 Jy ! Component: 150 - total flux cleaned = -0.00199987 Jy ! Component: 200 - total flux cleaned = -0.00243803 Jy ! Component: 250 - total flux cleaned = -0.00260144 Jy ! Component: 300 - total flux cleaned = -0.00263369 Jy ! Component: 350 - total flux cleaned = -0.00269521 Jy ! Component: 400 - total flux cleaned = -0.00290116 Jy ! Component: 450 - total flux cleaned = -0.00295746 Jy ! Component: 500 - total flux cleaned = -0.00304094 Jy ! Component: 550 - total flux cleaned = -0.00314964 Jy ! Component: 600 - total flux cleaned = -0.00325589 Jy ! Component: 650 - total flux cleaned = -0.00335985 Jy ! Component: 700 - total flux cleaned = -0.00336025 Jy ! Component: 750 - total flux cleaned = -0.00341022 Jy ! Component: 800 - total flux cleaned = -0.00338622 Jy ! Component: 850 - total flux cleaned = -0.00345799 Jy ! Component: 900 - total flux cleaned = -0.00352836 Jy ! Component: 950 - total flux cleaned = -0.00357409 Jy ! Component: 1000 - total flux cleaned = -0.00366478 Jy ! Component: 1050 - total flux cleaned = -0.00375435 Jy ! Component: 1100 - total flux cleaned = -0.00384255 Jy ! Component: 1150 - total flux cleaned = -0.00390777 Jy ! Component: 1200 - total flux cleaned = -0.00395095 Jy ! Component: 1250 - total flux cleaned = -0.00403554 Jy ! Component: 1300 - total flux cleaned = -0.00411886 Jy ! Component: 1350 - total flux cleaned = -0.00411871 Jy ! Component: 1400 - total flux cleaned = -0.00415975 Jy ! Component: 1450 - total flux cleaned = -0.00423977 Jy ! Component: 1500 - total flux cleaned = -0.00427926 Jy ! Component: 1550 - total flux cleaned = -0.00429896 Jy ! Component: 1600 - total flux cleaned = -0.00437658 Jy ! Component: 1650 - total flux cleaned = -0.00439563 Jy ! Component: 1700 - total flux cleaned = -0.00439549 Jy ! Component: 1750 - total flux cleaned = -0.00443302 Jy ! Component: 1800 - total flux cleaned = -0.00443301 Jy ! Component: 1850 - total flux cleaned = -0.00445141 Jy ! Component: 1900 - total flux cleaned = -0.00456094 Jy ! Component: 1950 - total flux cleaned = -0.00457866 Jy ! Component: 2000 - total flux cleaned = -0.00461436 Jy ! Total flux subtracted in 2048 components = -0.00463213 Jy ! Clean residual min=-0.001176 max=0.001024 Jy/beam ! Clean residual mean=-0.000036 rms=0.000365 Jy/beam ! Combined flux in latest and established models = 0.312592 Jy keep ! Adding 128 model components to the UV plane model. ! The established model now contains 258 components and 0.312592 Jy ![Exited script file: muppet] wmap "J1826-2924_S_2005_05_12_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.561 x 10.35 at 7.845 degrees (North through East) ! Clean map min=-0.0034914 max=0.24283 Jy/beam ! Writing clean map to FITS file: J1826-2924_S_2005_05_12_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.242833 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000363996 device "J1826-2924_S_2005_05_12_yyk\_map.eps/VPS" ! Attempting to open device: 'J1826-2924_S_2005_05_12_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.449686 0.449686 0.899372 1.79874 3.59749 7.19498 14.39 28.7799 57.5598 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.242 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.561 x 10.35 at 7.845 degrees (North through East) ! Clean map min=-0.0034914 max=0.24283 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1826-2924_S_2005_05_12_yyk\_map.gif/gif" ! Attempting to open device: 'J1826-2924_S_2005_05_12_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1826-2924_S_2005_05_12_yyk_uvs.log closed on Sat Oct 8 17:35:31 2005